looking for some skin temples

[umm 84]

Hello everyone,

 

I am looking for these jet skin temples for these models

 

Mirage F1

 

BAe Hawk

 

C130

 

so I can create the Kuwaiti Air Force skin for these threeJet. any help in this regards will be appreciation

 

Take care,

 

umm,

 

 

[Wrench 9,662]

templates for Dels' Hercs are, iirc, in the 1stGen downloads section somewhere.

 

for the others, none exist that I've ever seen (unless TMF has one somewhere for the F.1)

when a template in nonexistant, one has to build one from scratch. Not tooooooooooo, if one is used to working with multiple layers, just time consuming as all hell! (and I should know!!)

 

wrench

kevin stein

Edited April 16, 2011 by Wrench

[+Soulfreak 6,381]

Mirage F1 Temps are around somewhere. I have them on my hdd for years.

But don´t know where i got them...

[umm 84]

Thanks a lot I have found the C-130, but I didn't see the Mirage F1. Soulfreak if you do find skin please send them my way.

 

[+ludo.m54 2,055]

Hello,

 

You can find Mirage F-1C templates here :

 

http://www.checksix-fr.com/bibliotheque/index.php?Fichier=1499

 

Ludo

[umm 84]

Hello,

 

You can find Mirage F-1C templates here :

 

http://www.checksix-...hp?Fichier=1499

 

Ludo

 

 

Thanks

[ndicki 22]

I've got one for the Hawk - it isn't the most detailled I've ever done, but it'll get you started. I'll upload this afternoon.

[umm 84]

Thanks ndicki.

[umm 84]

I've got one for the Hawk - it isn't the most detailled I've ever done, but it'll get you started. I'll upload this afternoon.

 

Thank you fro the templet, and this is my work. but I have some proplem getting the number to show on the nose of the jet. any help

 

 

 

 

and this is my Decals.ini

 

 

[Decal001]

MeshName=vertTail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\Kuwait_flagr

Position=-4.50,1.496

Scale=0.5

DecalMaxLOD=4

 

[Decal002]

MeshName=vertTail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\Kuwait_flag

Position=-4.50,1.496

Scale=0.5

DecalMaxLOD=4

 

[Decal003]

MeshName=vertTail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\KUWN

Position=-4.00,1.000

Scale=0.8

DecalMaxLOD=4

 

[Decal004]

MeshName=vertTail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\KUWN

Position=-4.00,1.000

Scale=0.8

DecalMaxLOD=4

 

[Decal005]

MeshName=Left_outer_Wing

DecalLevel=0

DecalFacing=TOP

FilenameFormat=HawkT1A\KUWAIT HAWK\D\kuwlogo

Position=-3.83,-1.161

Scale=.5

DecalMaxLOD=4

 

[Decal006]

MeshName=Left_OUTER_Wing

DecalLevel=0

DecalFacing=BOTTOM

FilenameFormat=HawkT1A\KUWAIT HAWK\D\kuwlogo

Position=-3.83,-1.161

Scale=0.8

DecalMaxLOD=4

 

[Decal007]

MeshName=Right_outer_Wing

DecalLevel=0

DecalFacing=TOP

FilenameFormat=HawkT1A\KUWAIT HAWK\D\kuwlogo

Position=3.83,-1.161

Scale=0.5

DecalMaxLOD=4

 

[Decal008]

MeshName=Right_outer_Wing

DecalLevel=0

DecalFacing=BOTTOM

FilenameFormat=HawkT1A\KUWAIT HAWK\D\kuwlogo

Position=3.83,-1.161

Scale=0.8

DecalMaxLOD=4

 

[Decal009]

MeshName=vertTail

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\12sq

Position=-3.900,0.600

Scale=0.5

DecalMaxLOD=4

 

[Decal010]

MeshName=vertTail

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\12sq

Position=-3.900,0.600

Scale=0.5

DecalMaxLOD=4

[+Soulfreak 6,381]

6 decals on the vertTail?

That won´t work!

max. 2 Decals per side.

Is KUWN the decal for the Number?

If so, place them on the nose and not on tail.

[Spinners 15,984]

6 decals on the vertTail?

That won´t work!

 

Are quite sure about that? Because I regularly do that without any problems whatsoever.

 

[+Soulfreak 6,381]

Yip, it´s so since SFP 1 came out.

Try f.e. 3 decals on fuselage_right or so, then you will see what i mean.

[umm 84]

Ok so If I need to add the number to the nose then it will be somthing like this:

 

Decal001]

MeshName=none

DecalLevel=2

DecalFacing=RIGHT

FilenameFormat=HawkT1A\KUWAIT HAWK\D\KUWNA

Position=-3.900,0.600

Scale=0.5

DecalMaxLOD=4

 

and yes the KUWN is for the english number and I need to add another one that I am having the error with is the Arabic and I will be calling it KUWNA

 

 

one more thing:

is this all the lists of the parts:

Component[001]=Fuselage

Component[002]=Nose

Component[003]=LeftWing

Component[004]=RightWing

Component[005]=LeftOuterWing

Component[006]=RightOuterWing

Component[007]=LeftVertTail

Component[008]=RightVertTail

Component[009]=LeftStab

Component[010]=RightStab

Component[011]=HidePart1

 

and I am limited to 2 decasl correct for each?

[umm 84]

Yip, it´s so since SFP 1 came out.

Try f.e. 3 decals on fuselage_right or so, then you will see what i mean.

 

 

Do you mean SEP 2 correct?

[+Soulfreak 6,381]

NO!

SFP1 ---> Strike Fighters Project 1

yes you are limited!

but 2 per side.

f.e. Nose left 2 decals, and nose right 2 decals.

A little tip:

Start first with one decal. Bring it into position and check that´s all ok,

then start placing the 2nd decal etc...

so you can better find mistakes and eliminate them....

Edited April 18, 2011 by Soulfreak

[umm 84]

What About SFP2 are limited?

[+Soulfreak 6,381]

Yes.

Try it as i told you.

Start with one Decal and after that is done, do the 2nd one and so on.

With that method you will have not so many oportunities for a fault

as you have nov!

Belive me, i´m doing it for over 5 years now.... ;-)

[umm 84]

OK I will start with this one ok

 

[Decal001]

MeshName=Nose

DecalLevel=2

DecalFacing=LEFT

FilenameFormat=Kuwaiti_Mirage\Kuwait\d\FreeKuwait

Position=1.000,1.000

Rotation=0.0

Scale=0.8

DecalMaxLOD=3

 

free Kuwait is a text under the cocpet, But there is nothing showing

Edited April 18, 2011 by umm

[+Soulfreak 6,381]

Is it a a text wich is like numbers (different text on each Aircraft) or only one text on all aircrafts?

if it is the same text on every aircraft decal level shouldn´t be 2.

decal level 2 is used for numbers ---> different numbers on Aircrafts.

I think you should read again this:

http://combatace.com/index.php?automodule=downloads&showfile=345

There is a discription what means the decal level etc.

[umm 84]

Thanks I will read the file

[umm 84]

OK one thing if I havethe model in 3ds can I us the agreement form the model to place the decal.

 

 

 

[Spinners 15,984]

OK I will start with this one ok

 

[Decal001]

MeshName=Nose

DecalLevel=2<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< set to 0

DecalFacing=LEFT

FilenameFormat=Kuwaiti_Mirage\Kuwait\d\FreeKuwait

Position=1.000,1.000

Rotation=0.0

Scale=0.8

DecalMaxLOD=3

 

free Kuwait is a text under the cocpet, But there is nothing showing

[Wrench 9,662]

start with a known position -- for nose, in this case, it's the pilot position, then move forward or aft depending

[umm 84]

How to find out the pilot position sorry for my qustions

[Wrench 9,662]

did you look in the data ini??