hotrodss

@Gepard, thanks...I'll get the newer F/A-18. Now, how would I fix the problem with the Mig? Can I try my other weapons packs that I have ( Weapons Pack 2.52 & Weapons Pack 1/25/2009) I've gotten a little better at editing ini files, so what would I have to do? Thanks for your help, greatly appreciated! HR

Has anyone on CA downloaded & played the above campaign (for SF1) by Barnestoya? I know it's an old campaign but when I finally played it, I had nothing but problems with it. 1. SF1 was patched to 8.30.06 & used Bunyaps weapons pack. 2. All a/c's required were installed and tested with no problem in Single Mission (except Mig-29A, I could not load weapons, i.e. aa missles. They showed up in the "quantity" column but showed empty in the "load" column, selected certain station to load and no weapon to display) 3. After choosing Campaign and different a/c's to fly, on half of them I could not load weapons (nothing displayed in the "quantity" column) 4. The F/A-18A's not only had the pilot &ejection seat sticking THRU the canopy!! (along with it being partially OPEN!!) On take off the a/c SINK INTO THE RUNWAY and EXPLODE!!! I probably should have taken pictures and displayed them but I was so frustrated & angry I deleted the whole thing. Did anyone else experiance ANY problems with this add-on and can it be fixed? Not trying to put developer down, I'm just frustrated with it all, I'm looking for a good modern campaign for SF1 were I can fly modern a/c's. Barnestoya hasn't been on the site since 2009, so I can't contact him. ANY help/suggestions/fixes??? Thanks HR

Alright, Thanks

Is it possible (or advisable) to add multiple add-on campaigns to patched (8.30.06) SF1? OR should I do a "clean" install for each campaign I want to add? 1. I chose the 8.30.06 patch beacuse these are older campaigns and not sure if they are compatible with Oct 08 patch. 2. Don't want to have 2 or 3 installs for just 1 campaign (if possible) HR

Ok, everything worked fined before I added the 3rd party a/c skins. So if I replace the tga files from a CLEAN version of WoV, that (should) fix it???? @JonathanRL...thanks for the chuckle UPDATE....tried fixing by adding tga file to 'cockpit' folder (this folder only contains a bitmap image the altitude readout tape), no success, still have clear tail. How about deleting the texturexxx ini for the stock a/c paint scheme (USNGrey1 & USMCGrey1), will that work?

Hey folks, Having a small problem ( as you can see) with the tail sections on A-4s with the stock skins (USNGrey1 & USMCGrey1), the tail sections are clear?!?!?! When using 3rd party add-on skins there's no problem. The ini files have the correct texturesetxxx's, had the same problem when I added 3rd party skins for the F-4B, I fixed by adding parts of the stock a/c folder. Tried the same here but no luck. Has anyone else had this problem? Did I miss something? Thanks HR

UPDATE...WoV Rolling Thunder Campaign...After a little more investagation, I noticed if I choose to fly for the USMC (VMFA-314 F-4B) their start date is 5 Oct 65, the add-on weapons pack comes into the inventory. If I choose to fly for the USN (VF-96 F-4B) their start date is 10 Mar 65 no add-on weapons pack, so I guess sometime between Mar & Oct 65 is when the add-on weapons come into the ineventory, I just have to survive until then. HR

I've reinstalled WoV (again for the umpteenth time) and updated it to 8.30.06 patch level. Also installed Bunyap's WP 03Jul06, the problem: none of Bunyap's weapons show up when I play Rolling Thunder campaign, only standard in-game weapons. All weapons show when I play Single Mission though, can't remember if I forgot to add something else. Any help/suggestions??? Thanks HR p.s. did not add Oct2008b patch because in campaign mode you get stuck bombing Noi Boi airfield over & over.

***************************************************************** OMG!!! That was AWESOME!!!

SupGen, Major Lee, & Streakeagle thanks for the input...SF2 & Win 7 here I come. JediMaster...I've learned my lesson.

Well as the header says...it was a Saturday night (real world) on a MIGCAP and received a call from Redcrown. " Cobra 11, bandits 12 o'clock, angles 10, 20 miles." So I tell my #2 to drop tanks and I acquire & lock first blip on the radar so he can take the first shot. I give him the command to shot and THEN IT HAPPENS!!!!! I scream NNNOOOOO!!!! Wifey runs into the room yelling at me "What happened", I point to the screen as anger & frustration set in. The computer freezes up and there is this low scratching sound coming from the external HD & it's hot!?!?!? I look and point at it, wifey picks it up, looks at it and utters the words you NEVER want to hear when it comes to computers..."It's DEAD!!!!" I look at her and want to cry. ALL (and I mean ALL!!!) of my many version, add-on, patches, skins, terrains, EVERYTHING concerning Wings over XXXX Series 1 is GONE! So after a week of finally coming to the realization that I must start over, I ask you, the CA Community... Do I start over with Wings over XXXX Series 1 or do I move into the future with Wings over XXXX Series 2??? All opinions & suggestions will be considered. HR

Thanks WLJet & Baltika... @Baltika, if you're referring to WOV AirGround Expansion Pack by eburger68, I already have all his EP add-ons installed onto a separate install of WOV. I can't play it because my graphics card (NVIDIA 7300LE) is old and can't handle the extra eye candy, trying to get a new one. And yes I NEED to upgrade to SF2 series!!! HR

Started flying above campaign, attacked Noi Boi airfield to destroy the runway, no problem. I had to go back again (4x's) for the same thing!! I do get a 'Mission Accomplished' from Red Crown everytime I destroy the runway. Can anyone explain why the sim keeps assigning this target? Is it stuck in a loop? Or is there another problem I'm not aware of? HR

YEEAAAHH!!! Mytai01 is Back!!! love ur skins!!!

His second CD Big Tyme was a hit with us stationed in FLA. Every time we played it, a party broke out! RIP Heav.

Thanks MigBuster, for the info, I heard of this site, never really checked it out. Does anyone know how to convert the site to english?

OK great, other than F4 cd (I can get from a friend who doesn't play anymore) what else would I need?? Where can this F.L.A.R.E. be downloaded/purchased from?

Hey Viggen, congrats on future your enlistment to the Air Force! I hope things eventually workout for you. I spent 21yrs in (5ys active duty & 16yrs in the Air National Guard) I retired in Oct 2010, it was the best time of my life, I made great friends & went on some awesome deployments...I still miss being in & wearing the uniform. I was in a Logistics Sqd. (Transportation), I went in "open general" and like Veltro2k said " AF needs", so I was "assigned" to transportation. In JediMaster's reply...I've been in those situations TOO MANY times to count!! Stingray72 is right "keep any open mind". Anyway, I'll keep this short, no matter what job you do remember one thing when you fill out your "dream sheet" for assignments, go overseas!!! You'll love it!!! Have fun. Shawn

Was watching PTI on Friday and Mike Wilbon reported they would be known as the Manitoba Moose?!?!?

hey ya'll, Sorry it took a while to respond, My PSU is a S Power unit model # PS-450W. HR

Hey folks, quick question, I would like to purchase the SF2 series but I noticed the on the TW website the os platform is Win7/Vista, I thought I noticed at one time the 2nd series also supported XP. Was this ever the case?, or is this series just for Win7/Vista? Thanks HR

Hey Folks, I'm currently running a NVIDIA GeForce 7300LE, I know it's old (bought computer in '07). Looking for a new NVIDIA card, does anyone have any suggestions/opinions on a new NVIDIA GeForce graphics card? Thanks HR

Ok, I changed every F-105D I could find to the-25, it didn't work, still got CTD. So I just fixed everything back to the plain D model and it works like normal. I guess I'll have to contact MigBuster. Thanks for the help. HR

Thanks Wrench, but I think I have another problem...after adding the F-105D-25 folder in the objects/aircraft folder, I changed all F-105Ds to -25 in all 3 campaign.ini (RT, LB1, LB2). I went to fly in the RT campaign, clicked accept and got a CTD. I reread MigBusters sticky "adding a/c's to campaigns" and extracted the MissionData file, changed all sqd's flying the F-105D to -25's. After I save the changes, do I paste the MissionData folder back in the FLIGHT folder?