SPAD XIII C1. "Checkerboard" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1 
Historical notes:
This skin depict the SPAD XIII C1. flown by Lieutenant Robert W. Donaldson of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919. Lt. Robert W. Donaldson achieved one shared victory in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Checkerboard" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Checkerboard" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Checkerboard" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Checkerboard
Name=Checkerboard
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.

I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

 

pack of skins for the nid-52 are from the republican side and from the national side
the decals represent the 11th to 26th republican groups

SPAD XIII C1. "Diamond Dick" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant William H. Palmer of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. William W. Palmer achieved 3 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Diamond Dick" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Diamond Dick" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Diamond Dick" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Diamond Dick
Name=Diamond Dick
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding one optional (SPAD13_001.bmp) with a red star painted on the wheels.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Lightning Bolt" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Harvey Weir Cook of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Harvey Weir Cook achived 7 confirmed victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Lightning Bolt" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Lightning Bolt" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Lightning Bolt" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Lightning Bolt
Name=Lightning Bolt
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000 
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Easter Egg" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Samuel Kaye of 94th Aero Squadron. 
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Samuel Kaye achieved 4 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. 
During the Spring of 1919, "Easter Egg" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Easter Egg" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Easter Egg" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Easter Egg
Name=Easter Egg
Nation=USAS
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 

SPAD XIII C1. "Sumbeam" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in  First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant John Jeffers of 94th Aero Squadron. Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. John Jeffers achieved 2 victories in WW1, flying with 94th Aero Squadron. 
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Sumbeam" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Sumbeam" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13). 
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Sumbeam" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Sunbeam
Name=Sunbeam
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder. 
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson. 
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions. 
 

 

The Halberstadt CL.II was a German, 2 seat fighter/escort plane. The CL.II was designed to be an escort for reconnaissance flights. Its excellent maneuverability made it a match for single seat fighters and its field of fire made it an excellent ground attack plane. It entered service in August 1917 and was used in large numbers until the end of the war.
The Halberstadt CL.II had a plywood fuselage and was powered by a six-cylinder Mercedes D.III engine. It had a 7.92mm Spandau machine gun in the front fuselage for the pilot and a 7.92mm Parabellum gun on a ring mount for the observer. It could also carry a light bomb load. My version has a rack for 10 stick grenades mounted on the fuselage.
My download includes a hex camo skin, appropriate decals, and a fully functional cockpit. My skinning templates are included with the download.
I have included a sound file for the Mercedes D.III engine. The same sound has been used with other planes and you may already have it installed. I have included the sound file with the download in case you don't have it.

Credits
My thanks to Ojcar for making the data file for the Halberstadt CL.II and for making improvements to the guns.
My thanks to Nixou for making the sound file for the Mercedes engine many years ago.

Installation Instructions
For FE1 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder.
If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. 

For FE2 - Unzip the file and move the folder named "HalberstadtCL2" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "HalberstadtCL2." Move the folder named "D" from the Aircraft/HalberstadtCL2 folder into the Decals/HalberstadtCL2 folder you just made. 
If you don't already have it, move the sound file "mercedes160m2.wav" from my "Sounds" into your "Sounds" folder. If you don't have a Sounds folder, you can make one.

Skin for excellent oefD3_ba253 by Jan Tuma.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Add to oefD3_ba253.ini :
[TextureSetXXX]
Name=GreenPhR
Nation=AUSTRIA
Squadron=
Specular=0.400000
Glossiness=0.400000
Reflection=0.400000
Eugene