Mike Dora Posted January 12, 2011 Posted January 12, 2011 I've been trying out the Wings over Russia WW2 mod for SFP1, and have encountered an odd problem. The FW190A-4 and FW190A-6 models have invisible fuselages, see screenshots. The FW190F shows up OK though. Any suggestions for solutions please? Thanks Mike Quote
+daddyairplanes Posted January 12, 2011 Posted January 12, 2011 your best bet will be to ask this in the DAT forum as the mod is from there Quote
+hgbn Posted January 12, 2011 Posted January 12, 2011 Looks like to many decals on the same mesh Quote
+Gepard Posted January 12, 2011 Posted January 12, 2011 Yes, have had this problem with other models too. There are to many Decals placed at the fuselage. Reduce the number of decals and it should run. Quote
Derk Posted January 12, 2011 Posted January 12, 2011 I think its an early form of stealth.... Houdoe, Derk Quote
+Wrench Posted January 12, 2011 Posted January 12, 2011 i thought it was for ease of maintence .. the mechanic can actually see what he's working on!! yes, most definately caused by more than 3 decals on a single mesh. You'll hae to edit the decals ini, after figureing out which one is the offending unit (probably the stab marking, cross or id number) wrench kevin stein Quote
Mike Dora Posted January 12, 2011 Author Posted January 12, 2011 Yes, have had this problem with other models too. There are to many Decals placed at the fuselage. Reduce the number of decals and it should run. Thanks all, will try that when I get home. Mike Quote
Mike Dora Posted January 15, 2011 Author Posted January 15, 2011 Thanks again all, Deleting a couple of decals from the fuselage solved the problem, for the FW190As and, as I later discovered, for the P-39s. Mike Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.