FE2 Aircraft Hit Box Revisions

[Nicholas Bell 117]

Until I get enough done to make a package, I'm going to post these as I get them done.  I didn't approach this work with enough forethought to annotate every change, so I'm having to compare new vs old files to determine what changed.

 

Because there are more than a few variations on flight models, you'll have to cut and paste the changes into the *_DATA.INI files you are using.

 

// Sopwith Pup
// 3D Model By the A-Team
// Hitbox rev 5 Apr 2016

[Fuselage]
MinExtentPosition=-0.35,0.6,-0.35
MaxExtentPosition= 0.35,-2.5,0.5

[Nose]
MinExtentPosition=-0.42,0.6,-0.45
MaxExtentPosition= 0.42,1.2,0.5

[TopWingLeft]
MinExtentPosition= 0.0,1.0, 1.0
MaxExtentPosition=-1.25,-0.5, 1.1

[TopWingRight]
MinExtentPosition= 0.0,1.0, 1.0
MaxExtentPosition=1.25,-0.5, 1.1

[TopWingMidLeft]
MinExtentPosition=-1.25,1.0, 1.05
MaxExtentPosition=-2.85,-0.5, 1.15

[TopWingMidRight]
MinExtentPosition=1.25,1.0, 1.05
MaxExtentPosition=2.85,-0.5, 1.15

[TopWingTipLeft]
MinExtentPosition=-2.85,1.0, 1.10
MaxExtentPosition=-4.05,-0.5, 1.20

[TopWingTipRight]
MinExtentPosition=2.85,1.0, 1.10
MaxExtentPosition=4.05,-0.5, 1.20

[bottomWingLeft]
MinExtentPosition=-0.35,0.5, -0.25
MaxExtentPosition=-1.25,-1.0,-0.35

[bottomWingRight]
MinExtentPosition=0.35,0.5, -0.25
MaxExtentPosition=1.25,-1.0,-0.35

[bottomWingMidLeft]
MinExtentPosition=-1.25,0.5,-0.20
MaxExtentPosition=-2.85,-1.0,-0.30

[bottomWingMidRight]
MinExtentPosition=1.25,0.5,-0.20
MaxExtentPosition=2.85,-1.0,-0.30

[bottomWingTipLeft]
MinExtentPosition=-2.85,0.5,-0.15
MaxExtentPosition=-4.05,-1.0,-0.25

[bottomWingTipRight]
MinExtentPosition=2.85,0.5,-0.15
MaxExtentPosition=4.05,-1.0,-0.25

[Tail]
MinExtentPosition=-0.15,-2.5,-0.1
MaxExtentPosition= 0.15,-3.8,0.4

[LeftStab]
MinExtentPosition=-0.2,-3.05,0.4
MaxExtentPosition=-1.5,-4.1,0.5

[RightStab]
MinExtentPosition=0.2,-3.05,0.4
MaxExtentPosition=1.5,-4.1,0.5


[Pilot]
MinExtentPosition=-0.25,-0.2,-0.1
MaxExtentPosition= 0.25,-0.7, 0.7

[Engine]
MinExtentPosition=-0.40,1.2,-0.4
MaxExtentPosition= 0.40,0.75,0.4

[FuelTank]
MinExtentPosition=-0.3,0.65,-0.3
MaxExtentPosition= 0.3,0.59,0.3
 

 

///////////////////////////////////////////////////////////////////////

 

// Pfalz D.III
// 3D Model By the A-Team
// Hitbox rev 5 Apr 2016 NBell

[Nose]
MinExtentPosition=-0.4,1.5,-0.45
MaxExtentPosition= 0.4,0.6, 0.45

[Fuselage]
MinExtentPosition=-0.4,0.6,-0.45
MaxExtentPosition= 0.4,-3.0, 0.6

[TopWingLeft]
MinExtentPosition=  0.0, 0.7,0.8
MaxExtentPosition= -2.5,-0.9,0.9

[TopWingRight]
MinExtentPosition=  0.0, 0.7,0.8
MaxExtentPosition=  2.5,-0.9,0.9

[TopWingMidLeft]
MinExtentPosition= -2.5, 0.7,0.8
MaxExtentPosition= -3.6,-0.9,0.9

[TopWingMidRight]
MinExtentPosition= 2.5, 0.7,0.8
MaxExtentPosition= 3.6,-0.9,0.9

[TopWingTipLeft]
ModelNodeName=WingT_L
MinExtentPosition= -3.6, 0.7,0.8
MaxExtentPosition= -4.2,-0.9,0.9

[TopWingTipRight]
MinExtentPosition= 3.6, 0.7,0.8
MaxExtentPosition= 4.2,-0.9,0.9

[bottomWingLeft]
MinExtentPosition= -0.5, 0.23,-0.5
MaxExtentPosition= -2.2,-0.95,-0.4

[bottomWingRight]
MinExtentPosition= 0.5, 0.23,-0.5
MaxExtentPosition= 2.2,-0.95,-0.4

[bottomWingMidLeft]
MinExtentPosition= -2.2, 0.23,-0.5
MaxExtentPosition= -3.2,-0.95,-0.4

[bottomWingMidRight]
MinExtentPosition= 2.2, 0.23,-0.5
MaxExtentPosition= 3.2,-0.95,-0.4

[bottomWingTipLeft]
MinExtentPosition= -3.2, 0.23,-0.5
MaxExtentPosition= -3.9,-0.95,-0.4

[bottomWingTipRight]
MinExtentPosition= 3.2, 0.23,-0.5
MaxExtentPosition= 3.9,-0.95,-0.4

[VertTail]
MinExtentPosition= -0.1,-4.2,0.0
MaxExtentPosition=  0.1,-5.4, 1.0

[LeftStab]
MinExtentPosition=  -1.25,-4.1,-0.05
MaxExtentPosition=   0.00,-5.2, 0.05

[RightStab]
MinExtentPosition= 1.25,-4.1,-0.05
MaxExtentPosition= 0.00,-5.2, 0.05

[Pilot]
MinExtentPosition=-0.25,-1.35,-0.1
MaxExtentPosition= 0.25,-0.85, 0.75

[Engine]
MinExtentPosition=-0.38,0.6,-0.3
MaxExtentPosition= 0.38,1.5,0.6

///////////////////////////////////////////

// Nieuport 17 model (Also used for Nieuport 23)
// 3D Model By MontyCZ - LOD File dated 2/22/2007 Size 217 KB
// Hitboxes revised NBell March 2016 for N17 and N23 types

[Fuselage]
MinExtentPosition=-0.35,-1.57,-0.70
MaxExtentPosition= 0.35, 0.45, 0.10

[Nose]
MinExtentPosition=-0.47, 0.5,-0.8
MaxExtentPosition= 0.47, 0.89, 0.2

[TopWingTipRight]
ModelNodeName=WingTR
MinExtentPosition= 4.05,-0.80,0.45
MaxExtentPosition= 3.78, 0.32,0.55

[VertTail]
MinExtentPosition= -0.05,-4.6, -0.3
MaxExtentPosition=  0.05,-3.7, 0.66

[LeftStab]
MinExtentPosition= -1.2,-4.3, -0.025
MaxExtentPosition= 0.00,-3.3, 0.01

[RightStab]
MinExtentPosition= 1.2,-4.3, -0.025
MaxExtentPosition= 0.00,-3.3, 0.01

[Pilot]
MinExtentPosition=-0.25,-0.85,-0.55
MaxExtentPosition= 0.25,-0.41, 0.38

[Engine]
MinExtentPosition=-0.4, 0.5,-0.75
MaxExtentPosition= 0.4, 0.89, 0.15

[MainFuelTank]
MinExtentPosition=-0.2, 0.02, 0.10
MaxExtentPosition= 0.2, 0.3, -0.42

///////////////////////////////

//Albatros C.III
//model by Stephen1918
//Hitbox rev 2 Apr 2016 NBell

[Fuselage]
MinExtentPosition=0.41,-3.68,-0.6
MaxExtentPosition=-0.39,1.8,0.39

[Nose]
MinExtentPosition=-0.30,2.15,0.19
MaxExtentPosition= 0.30,1.68,-0.28

[TopWingLeft]
MinExtentPosition= -2.84,-1.05,0.9
MaxExtentPosition= -0.03, 0.77,1.1

[TopWingRight]
MinExtentPosition= 2.84,-1.05,0.9
MaxExtentPosition= 0.03, 0.77,1.1

[TopWingTipLeft]
MinExtentPosition= -5.67,-1.05,1.0
MaxExtentPosition= -2.86, 0.77,1.2

[TopWingTipRight]
MinExtentPosition= 5.67,-1.05,1.0
MaxExtentPosition= 2.86, 0.77,1.2

[bottomWingLeft]
MinExtentPosition= -2.85,-1.05,-0.7
MaxExtentPosition= -0.53, 0.77,-0.5

[bottomWingRight]
MinExtentPosition= 2.85,-1.05,-0.7
MaxExtentPosition= 0.53, 0.77,-0.5

[bottomWingTipLeft]
MinExtentPosition= -5.23,-1.05,-0.6
MaxExtentPosition= -2.91, 0.77,-0.4

[bottomWingTipRight]
MinExtentPosition= 5.23,-1.05,-0.6
MaxExtentPosition= 2.91, 0.77,-0.4

[VertTail]
MinExtentPosition=-0.06,-5.5,-0.34
MaxExtentPosition= 0.06,-3.5,0.7

[LeftStab]
MinExtentPosition= -1.41,-5.5,-0.04
MaxExtentPosition= -0.08,-3.5, 0.00

[RightStab]
MinExtentPosition= 1.41,-5.5,-0.04
MaxExtentPosition= 0.08,-3.5, 0.00

[Pilot]
MinExtentPosition=-0.25,-0.3,-0.34
MaxExtentPosition= 0.25,0.3, 0.65

[Gunner]
MinExtentPosition=-0.25,-1.4,-0.23
MaxExtentPosition= 0.25,-0.9,0.9

[internalGun1]
MinExtentPosition=0.15,0.66,0.16
MaxExtentPosition=0.30,1.77,0.36

[MainFuelTank]
MinExtentPosition=-0.88,-0.27,0.89
MaxExtentPosition= 0.88,0.69, 1.05
 

//////////////////////////////////////

//Airco DH9a
//Model by Stephen1918
//Hitbox rev 4 Apr 2016 NBell

[TopWingLeft]
MinExtentPosition=0.0,-0.64,1.19
MaxExtentPosition=-2.43,1.09,1.39

[TopWingRight]
MinExtentPosition=0.0,-0.64,1.19
MaxExtentPosition=2.43,1.09,1.39

[TopWingTipLeft]
MinExtentPosition=-2.42,-0.64,1.30
MaxExtentPosition=-6.46,1.09,1.50

[TopWingTipRight]
MinExtentPosition=2.42,-0.64,1.30
MaxExtentPosition=6.46,1.09,1.50

[bottomWingLeft]
MinExtentPosition=-0.36,-0.99,-0.57
MaxExtentPosition= -2.41,0.79,-0.37

[bottomWingRight]
MinExtentPosition=0.36,-0.99,-0.57
MaxExtentPosition= 2.41,0.79,-0.37

[bottomWingTipLeft]
MinExtentPosition=-2.42,-0.99,-0.47
MaxExtentPosition=-6.45,0.79,-0.27

[bottomWingTipRight]
MinExtentPosition=2.42,-0.99,-0.47
MaxExtentPosition=6.45,0.79,-0.27

[Pilot]
MinExtentPosition=-0.25,-1.28,-0.54
MaxExtentPosition= 0.25,-0.54, 1.13

[Gunner]
MinExtentPosition=-0.25,-2.03,-0.54
MaxExtentPosition=0.25,-1.29,1.13

[internalGun1]
MinExtentPosition=-0.31,-0.66,0.46
MaxExtentPosition=-0.31,0.33,0.36

[MainFuelTank]
MinExtentPosition=-0.21,-0.0,0.4
MaxExtentPosition= 0.21,0.8,-0.4
 

///////////////////////////////

//Airco DH9
//Model by Stephen1918
//Hitbox rev 4 Apr 2016

[TopWingLeft]
MinExtentPosition=0.0,-0.64,1.19
MaxExtentPosition=-2.43,1.09,1.39

[TopWingRight]
MinExtentPosition=0.0,-0.64,1.19
MaxExtentPosition=2.43,1.09,1.39

[TopWingTipLeft]
MinExtentPosition=-2.42,-0.64,1.30
MaxExtentPosition=-6.46,1.09,1.50

[TopWingTipRight]
MinExtentPosition=2.42,-0.64,1.30
MaxExtentPosition=6.46,1.09,1.50

[bottomWingLeft]
MinExtentPosition=-0.36,-0.99,-0.57
MaxExtentPosition= -2.41,0.79,-0.37

[bottomWingRight]
MinExtentPosition=0.36,-0.99,-0.57
MaxExtentPosition= 2.41,0.79,-0.37

[bottomWingTipLeft]
MinExtentPosition=-2.42,-0.99,-0.47
MaxExtentPosition=-6.45,0.79,-0.27

[bottomWingTipRight]
MinExtentPosition=2.42,-0.99,-0.47
MaxExtentPosition=6.45,0.79,-0.27

[Pilot]
MinExtentPosition=-0.25,-1.28,-0.54
MaxExtentPosition= 0.25,-0.54, 1.13

[Gunner]
MinExtentPosition=-0.25,-2.03,-0.54
MaxExtentPosition=0.25,-1.29,1.13
PitchModelNodeName=ScarffRing

[internalGun1]
MinExtentPosition=-0.31,-0.66,0.66
MaxExtentPosition=-0.21,0.33,0.56

[MainFuelTank]
MinExtentPosition=-0.21,-0.0,0.4
MaxExtentPosition= 0.21,0.8,-0.4
 

//////////////////////////////////

//DH5 Data
//Hit Box & Misc Revisions NBell 2 Apr 2016
//Serious problems with duplicate node names and hitboxes on wings

[Fuselage]
MinExtentPosition=-0.5,-2.0,-0.491
MaxExtentPosition= 0.5,1.097,0.5

[TopWingLeft]
MinExtentPosition= -3.849,-1.235,1.0
MaxExtentPosition=  0.716,0.26,1.1

[TopWingRight]
MinExtentPosition= 3.849,-1.235,1.0
MaxExtentPosition= 0.716,0.26,1.1

[TopWingMidLeft]  //Need to remark these out
//MinExtentPosition= -3.849,-1.235,0.943
//MaxExtentPosition=  0.716,0.26,1.312

[TopWingMidRight]  //Need to remark these out
//MinExtentPosition=   3.849,-1.235,0.943
//MaxExtentPosition=   0.716,0.26,1.312

[TopWingTipLeft]
//MinExtentPosition= -3.849,-1.235,0.943
//MaxExtentPosition=  0.716,0.26,1.312

[TopWingTipRight]  //Need to remark these out
//MinExtentPosition=   3.849,-1.235,0.943
//MaxExtentPosition=   0.716,0.26,1.312

[bottomWingLeft]
MinExtentPosition= -3.847,-0.55,-0.5
MaxExtentPosition= -0.5,0.944,-0.4

[bottomWingRight]
MinExtentPosition=   3.847,-0.55,-0.5
MaxExtentPosition=   0.5,0.944,-0.4

[bottomWingMidLeft]  //Need to remark these out
//MinExtentPosition=  -3.847,-0.55,-0.566
//MaxExtentPosition=  -0.714,0.944,-0.196

[bottomWingMidRight]  //Need to remark these out
//MinExtentPosition=   2.847,-0.55,-0.5
//MaxExtentPosition=   0.5,0.944,-0.4

[bottomWingTipLeft]  //Need to remark these out
//MinExtentPosition=  -3.847,-0.55,-0.566
//MaxExtentPosition=  -0.714,0.944,-0.196

[bottomWingTipRight]  //Need to remark these out
//MinExtentPosition=   3.847,-0.55,-0.5
//MaxExtentPosition=   0.5,0.944,-0.4

[Nose]
MinExtentPosition= -0.6,1.1,-0.566
MaxExtentPosition= 0.6,1.5,0.597

[Tail]
MinExtentPosition=-0.255,-4.1151,-0.332
MaxExtentPosition= 0.193,-2.0,0.18

[VertTail]
MinExtentPosition=  -0.029,-4.8,0.127
MaxExtentPosition=   0.029,-3.8,0.8

[LeftStab]
MinExtentPosition=  -1.267,-4.65,0.051
MaxExtentPosition=   0.0000,-3.5,0.111

[RightStab]
MinExtentPosition=  1.267,-4.65,0.051
MaxExtentPosition=   0.0000,-3.5,0.111

[Pilot]
MinExtentPosition=-0.25,-0.1,-0.389
MaxExtentPosition= 0.25,0.4,0.8

[internalGun1]
MinExtentPosition=-0.08,0.345, 0.493
MaxExtentPosition=-0.25,1.437, 0.688

[MainFuelTank]
MinExtentPosition=-0.33,-0.6,-0.084    
MaxExtentPosition= 0.33,-0.3,0.3
 

///////////////////////

AEG G4
//Hitbox rev 4 Apr 2016 NBell

[TopWingRight]
ModelNodeName=wing_upper_inner_R

[MainFuelTank]
MinExtentPosition=-0.30,-0.24,1.8
MaxExtentPosition= 0.90, 0.80,1.9

[FuelTankL]
MinExtentPosition=-0.0, -0.3, -0.6
MaxExtentPosition= -0.5, -0.6, 0.4

[FuelTankR]
MinExtentPosition=-0.0, -0.3, -0.6
MaxExtentPosition= 0.5, -0.6, 0.4

Not sure why I can't make this into separate posts....

 

Here are the text files for the above.

HitBox Files 5 April 16.zip

Edited April 6, 2016 by Nicholas Bell

[Wrench 9,850]

don't forget, you have to do the Collision Points as well!!

[Nicholas Bell 117]

don't forget, you have to do the Collision Points as well!!

 

How is that done?  I don't see them in the LOD Viewer.

[Wrench 9,850]

I just use the same specs as the bounding boxes (which I also use for the hit boxes)

 

BUT...

 

sometimes the hit box/collision point needs to be smaller than the bounding box. In the case below, for the Sea Venom (not released yet by Veltro), it has a tendency to 'drag is butt' on take off rotation. The blue being the bounding box, when those specs are used causes a tail strike, even if the actual part isn't touching the ground. So, I had to reduce the size of the hit/collision box (the smaller green box) to prevent that. It dosn't seem to effect damage taken by enemy action, as it still takes damage from gunfire, etc.

 

example of the statements, I use them in the same order, and it seem to be working ok (well, so far!!)

 

 

[RightTail]

ParentComponentName=RightWing

ModelNodeName=VTail_R

ShowFromCockpit=TRUE

DetachWhenDestroyed=TRUE

DamageRating=DESTROYED

MassFraction=0.017

 

--big snip of stuff that don't matter here --

 

 

MinExtentPosition=1.64,-5.65,-0.18

MaxExtentPosition=1.34,-3.95,1.13

CollisionPoint[001]=1.64,-5.65,-0.18

CollisionPoint[002]=1.34,-3.95,1.13

 

SystemName[001]=Rudder_R

SystemName[002]=RightTailBumper

 

 

[Nicholas Bell 117]

I just use the same specs as the bounding boxes (which I also use for the hit boxes)

 

BUT...

 

sometimes the hit box/collision point needs to be smaller than the bounding box. In the case below, for the Sea Venom (not released yet by Veltro), it has a tendency to 'drag is butt' on take off rotation. The blue being the bounding box, when those specs are used causes a tail strike, even if the actual part isn't touching the ground. So, I had to reduce the size of the hit/collision box (the smaller green box) to prevent that. It dosn't seem to effect damage taken by enemy action, as it still takes damage from gunfire, etc.

 

example of the statements, I use them in the same order, and it seem to be working ok (well, so far!!)

 

Using the bounding box for collision points make sense on the surface, but looking at the stock models there are discrepancies which are confusing to me.  Fuselages have 8 collision points.  Some components have a single point (!).

 

I think the hit boxes in general need to be smaller than the bounding box, which are normally larger than the actual component they are containing.

[Do335 382]

I think the hit boxes in general need to be smaller than the bounding box, which are normally larger than the actual component they are containing.

Yes because think about it: a wing with sweep (or dihedral) but with the same volume. If you use bounding box as hitbox, the larger the swept back angle, the bigger the hit/bounding box is. So this would give the swept wing an unfair advantage with hitbox size --> more toughness. Therefore the ideal hitbox should contain the same volume as the component.

 

But.... I have yet found an accurate way to do it, even looking at the stock min/max values. Atm one just has to eye it I suppose, what they say in aviation TLAR rule (that looks about right...), also some tests by shooting at it.

Edited April 6, 2016 by Do335

[+ojcar 157]

Stupid question: How I install the Mues Tool box programs?. They come with a lot of .dll files and I don't know where they go (or where go the .exe files)

Edited April 8, 2016 by ojcar

[+Stephen1918 1,474]

Stupid question: How I install the Mues Tool box programs?. They come with a lot of .dll files and I don't know where they go (or where go the .exe files)

I only use the LODViewer. I just made a "Utilities" folder on my hard drive and unpacked everything there. I don't know what .dll;s go with each .exe, but if they're all there it seems to work OK. After you launch the exe, you will have to use "File Open" to navigate to where your mods are installed - similar to the old CAT extractor.

[+ojcar 157]

Thank you. Maybe when I'm finished with "something"  I'm doing, I'll take a look at some planes damage models.

Edited April 8, 2016 by ojcar

[Nicholas Bell 117]

Yes because think about it: a wing with sweep (or dihedral) but with the same volume.

 

Speaking of dihedral, while most 3W models are okay, the SE5a was pretty sloppy on the hit boxes.  No dihedral, top wing wrong cord length and incorrectly positioned in both x and z axis, tail too large, stabilizers wrong z position....

Here is my fixed version.

 

// Se5a Model By Thirdwire

// Hitbox rev 8 April 2016 NBell

 

[Fuselage]

MinExtentPosition=-0.44,-3.14,-0.40

MaxExtentPosition= 0.44, 0.45, 0.5

 

[TopWingLeft]

MinExtentPosition=   0.00,-0.75, 1.0

MaxExtentPosition=   -1.71, 0.7, 1.1

 

[TopWingRight]

MinExtentPosition=   0.00,-0.75, 1.0

MaxExtentPosition=   1.71, 0.7, 1.1

 

[TopWingMidLeft]

MinExtentPosition=  -3.01,-0.75, 1.2

MaxExtentPosition=  -1.71, 0.7, 1.1

 

[TopWingMidRight]

MinExtentPosition=  3.01,-0.75, 1.2

MaxExtentPosition=  1.71, 0.7, 1.1

 

[TopWingTipLeft]

MinExtentPosition=  -4.01,-0.75, 1.3

MaxExtentPosition=  -3.01, 0.7, 1.2

 

[TopWingTipRight]

MinExtentPosition=  4.01,-0.75, 1.3

MaxExtentPosition=  3.01, 0.7, 1.2

 

[bottomWingLeft]

MinExtentPosition=  -1.71,-1.2,-0.35

MaxExtentPosition=  -0.39, 0.29,-0.25

 

[bottomWingRight]

MinExtentPosition=  1.71,-1.2,-0.35

MaxExtentPosition=  0.39, 0.29,-0.25

 

[bottomWingMidLeft]

MinExtentPosition=  -3.01,-1.2,-0.25

MaxExtentPosition=  -1.71, 0.29,-0.15

 

[bottomWingMidRight]

MinExtentPosition=  3.01,-1.2,-0.25

MaxExtentPosition=  1.71, 0.29,-0.15

 

[bottomWingTipLeft]

MinExtentPosition=  -3.97,-1.2,-0.05

MaxExtentPosition=  -3.01, 0.29,-0.15

 

[bottomWingTipRight]

MinExtentPosition=  3.97,-1.2,-0.05

MaxExtentPosition=  3.01, 0.29,-0.15

 

[VertTail]

MinExtentPosition=  -0.03,-4.6,-0.08

MaxExtentPosition=   0.03,-3.4, 0.95

 

[LeftStab]

MinExtentPosition=  -1.52,-4.6, 0.05

MaxExtentPosition=   0.00,-3.60, 0.0

 

[RightStab]

MinExtentPosition=  1.52,-4.6, 0.05

MaxExtentPosition=  0.00,-3.60, 0.0

 

[Pilot]

MinExtentPosition=-0.25,-1.4,-0.35

MaxExtentPosition= 0.25,-1.0, 0.8

 

SE5a_Hitbox.txt

[Do335 382]

Looking great there!

 

 

 

(if one attaches a wire to it, can these go up with the wind?)

[Nicholas Bell 117]

AEG C4

Fe2

Fokker D8

Re8

Sopwith Triplane

 

 

HitBox Files 4-7-16.zip

[+VonS 1,424]

Excellent, thank you for posting these so quickly.

 

Von S

[+Stephen1918 1,474]

Thanks for doing this, Nicholas. I'll start making revisions on my planes (when I finish the other stuff I'm doing...)

Edited April 11, 2016 by Stephen1918

[Nicholas Bell 117]

Be2c

Be2d

Dolphin

Salmson A2

3W Strutter 110/130

Strutter 1A2

Walfish
 

HitBox Files 4-14-16.zip

[+VonS 1,424]

Thanks for these quick uploads Nicholas. I've just submitted Ver 7.0 of my FM tweaks for approval - and they include the previous relevant hit box tweaks you posted, among several other additions. The latest ones for the B.e. types, Salmson, 1A2 and 110/130 Strutters I will include in a Ver 8.0 update down the road, later in the summer, that will include another 6 or 7 plane types for the Western theatre.

 

Happy flying,

Von S

[Nicholas Bell 117]

You're welcome.  And thank you for your FM edits.  They take a lot more effort.  I'm running out of steam on this myself.

 

I should note the stock 3W Albatros D3's and D5's, DFW,  Camels and Spads are good enough not to bother with them.  I've been decreasing the pilot sizes a bit, but if someone wants to do that for these they can do that on their own (reduce the x value to 0.25 and -0.25).

[Silberpfeil 363]

Thank you, Nicholas Bell, for all your hard work in these corrections!

[Nicholas Bell 117]

You're welcome!  I hope they are improving the experience.  Maybe just knowing they are a bit tighter with the actual model is enough.

 

The Fokker D7's are fine.

 

Here's a few more:

Snipe

Nieuport 28

Fe 8

Siemens-Schuckert D3

 

 

 

 

HitBox Files 4-18-16.zip

[Nicholas Bell 117]

Aviatik C2

Br 14

DH-2

Hanriot HD-1

Nieuport 17 & 23

Vickers Fb 5

 

HitBox Files 4-21-16.zip

[Nicholas Bell 117]

Fokker E II

Fokker E III

HP 400

Nieuport 10

Nieuport 11

Pfalz D12

Rumpler C1

 

HitBox Files 4-27-16.zip

[+quack74 329]

Man, That is a lot of work. Thank you sir.

[+Stephen1918 1,474]

I agree. Thanks for taking the time to do this, Nicholas.

[+VonS 1,424]

Indeed, these are superb updates. I look forward to rolling many of them into the 7.5 update for my FM tweaks. Thank you for doing these hitbox revisions.

 

Von S

Edited April 28, 2016 by VonS

[Nicholas Bell 117]

Thanks, guys.  I've got this down pretty good now so I can do one model in 30-60 minutes...dependent.  41 complete and I'm not counting how many more to do...LOL.

 

Albatros D1

Albatros D2 Early and Late

Halberstadt D3

Hannover CLII

HitBox Files 4-29-16.zip