Jump to content
  • Announcements

    • Erik

      2022 Support Drive   09/01/2022

      Our support drive for 2022 has kicked off. You can find out more about it here: Please Donate or Subscribe

Recommended Posts

FW-190A4


This is one of the first versions of this German fighter, who believes for the sfp2 series. the file contains the model of the plane plus 4 skin, a template of high resolution, the armament plus the new sounds and how to install them, only the pilot is not my author and I do not know who created it, but he is grateful for his work.
Sorry my bad english

Torno & Banidos team


 

  • Like 1
  • Thanks 3

Share this post


Link to post
Share on other sites

my only complaint is: 

shouldn't the template be a layered PSD, instead of a single layer bmp?

Share this post


Link to post
Share on other sites

I had the same issue as well. Finally managed to finagle it to open

perhaps, instead of using RAR, why not use 7z. Like everyone else does

Share this post


Link to post
Share on other sites

I had the same problem, WinRAR would not open the RAR file, kept telling that the file was corrupted.

Managed to get it open with 7Zip, though, and installed. I like the cockpit, it's been a while since we saw a new purpose-built WW2 cockpit.

I am getting something strange in flight with this aircraft. It is hard to describe in words, but the center of the model seems to be some distance behind the tailfin, so in flight it rotates around a large circle, not around where the CoG of the actual aircraft is (that is, around about where the pilot is seated).

 

Share this post


Link to post
Share on other sites

"only the pilot is not my author and I do not know who created it".  The pilot is by RussoUK.

Share this post


Link to post
Share on other sites

I like very very much, but some tunnings are badly needed. The hitboxes are porked. The cockpit is wonderfull. Thanks Torno!!!!

Share this post


Link to post
Share on other sites

Turns out my version of 7z was outdated!

Thanks for the new model Torno! Only needed a little tweak for rudder control.

Share this post


Link to post
Share on other sites

I've not experiened control issues flying on NORMAL.

amariani, please post your rudder tweeks?

Share this post


Link to post
Share on other sites

Ok, I replaced the rudder entries with the ones from the stock Spitfire Mk. IXc.

In the data.ini go to [Rudder]...


[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
//ReverseInput=
MaxDeflection=33.8
MinDeflection=-33.8
CDdc=0.0135
Cydc=0.1671
Cldc=0.0255
Cndc=-0.0223
CydcAlphaTableNumData=37
CydcAlphaTableDeltaX=10.00
CydcAlphaTableStartX=-180.00
CydcAlphaTableData=1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000
CydcMachTableNumData=11
CydcMachTableDeltaX=0.10
CydcMachTableStartX=0.00
CydcMachTableData=1.217,1.204,1.164,1.096,1.000,0.976,0.917,0.834,0.728,0.633,0.544
CldcAlphaTableNumData=37
CldcAlphaTableDeltaX=10.00
CldcAlphaTableStartX=-180.00
CldcAlphaTableData=1.000,-0.282,-1.469,-2.418,-3.016,-3.189,-2.918,-2.234,-1.221,0.000,1.282,2.469,3.418,4.016,4.189,3.918,3.234,2.221,1.000,-0.297,-1.361,-1.795,-1.335,-0.844,-1.173,-0.915,-1.301,-1.463,-1.653,-2.122,-2.735,-3.318,-3.659,-3.620,-3.119,-2.202,-1.000
CldcMachTableNumData=11
CldcMachTableDeltaX=0.10
CldcMachTableStartX=0.00
CldcMachTableData=1.217,1.203,1.163,1.096,1.000,0.985,0.931,0.838,0.731,0.638,0.562
CndcAlphaTableNumData=37
CndcAlphaTableDeltaX=10.00
CndcAlphaTableStartX=-180.00
CndcAlphaTableData=-1.000,-0.985,-0.940,-0.866,-0.766,-0.643,-0.500,-0.342,-0.174,0.000,0.174,0.342,0.500,0.643,0.766,0.866,0.940,0.985,1.000,0.971,0.986,0.990,0.718,0.163,0.023,0.034,0.139,0.058,0.112,0.294,0.400,0.531,0.669,0.800,0.906,0.976,1.000
CndcMachTableNumData=11
CndcMachTableDeltaX=0.10
CndcMachTableStartX=0.00
CndcMachTableData=1.218,1.204,1.164,1.096,1.000,1.161,1.220,1.203,1.144,1.051,0.966
MaxControlSpeed=122.52
ControlRate=1.0
MaxControlSpeed=56.32
ModelNodeName=Rudder
ReverseModelOrientation=TRUE
RotationAxis=Y-AXIS
 

...and replace everything with...


[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
MaxDeflection=30.0
MinDeflection=-30.0
CDdc=0.0134
Cydc=0.0541
Cldc=0.0171
Cndc=-0.0304
CydcAlphaTableNumData=37
CydcAlphaTableDeltaX=10.00
CydcAlphaTableStartX=-180.00
CydcAlphaTableData=1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000
CydcMachTableNumData=11
CydcMachTableDeltaX=0.10
CydcMachTableStartX=0.00
CydcMachTableData=1.217,1.204,1.164,1.096,1.000,0.976,0.917,0.834,0.728,0.633,0.544
CldcAlphaTableNumData=37
CldcAlphaTableDeltaX=10.00
CldcAlphaTableStartX=-180.00
CldcAlphaTableData=1.000,-0.506,-1.890,-2.985,-3.661,-3.834,-3.485,-2.655,-1.445,0.000,1.505,2.889,3.985,4.661,4.834,4.485,3.655,2.445,1.000,-0.534,-1.751,-2.216,-1.620,-1.014,-1.401,-1.087,-1.539,-1.725,-1.942,-2.484,-3.188,-3.850,-4.222,-4.143,-3.525,-2.423,-1.000
CldcMachTableNumData=11
CldcMachTableDeltaX=0.10
CldcMachTableStartX=0.00
CldcMachTableData=1.217,1.203,1.163,1.096,1.000,0.985,0.931,0.838,0.731,0.638,0.562
CndcAlphaTableNumData=37
CndcAlphaTableDeltaX=10.00
CndcAlphaTableStartX=-180.00
CndcAlphaTableData=-1.000,-0.985,-0.940,-0.866,-0.766,-0.643,-0.500,-0.342,-0.174,0.000,0.174,0.342,0.500,0.643,0.766,0.866,0.940,0.985,1.000,0.971,0.986,0.990,0.718,0.163,0.023,0.034,0.139,0.058,0.112,0.294,0.400,0.531,0.669,0.800,0.906,0.976,1.000
CndcMachTableNumData=11
CndcMachTableDeltaX=0.10
CndcMachTableStartX=0.00
CndcMachTableData=1.218,1.205,1.164,1.096,1.000,1.161,1.220,1.203,1.144,1.051,0.966
MaxControlSpeed=113.81
ControlRate=4.0
ModelNodeName=Rudder
ReverseModelOrientation=FALSE
RotationAxis=Y-AXIS
 

The problem I was having was that when I tried to turn left using the rudder it would turn right instead and vise versa, also reaction was a little slow. This mod solved the problem.

  • Thanks 1

Share this post


Link to post
Share on other sites

Thank you very much for your effort and your time so that we can enjoy it.

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By torno
      This is one of the first versions of this German fighter, who believes for the sfp2 series. the file contains the model of the plane plus 4 skin, a template of high resolution, the armament plus the new sounds and how to install them, only the pilot is not my author and I do not know who created it, but he is grateful for his work.
      Sorry my bad english
      Torno & Banidos team
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..