FW-190A4

[+torno 6,139]

View File

FW-190A4

---

This is one of the first versions of this German fighter, who believes for the sfp2 series. the file contains the model of the plane plus 4 skin, a template of high resolution, the armament plus the new sounds and how to install them, only the pilot is not my author and I do not know who created it, but he is grateful for his work.
Sorry my bad english

Torno & Banidos team

---

• Submitter
  torno
• Submitted
  09/10/2018
• Category
  FW-190

 

[Wrench 9,846]

my only complaint is: 

shouldn't the template be a layered PSD, instead of a single layer bmp?

[amariani 4,881]

I can't open the downloaded file.

[Wrench 9,846]

I had the same issue as well. Finally managed to finagle it to open

perhaps, instead of using RAR, why not use 7z. Like everyone else does

[amariani 4,881]

I'm using 7z and this is what I get...

[Gatling20 753]

I had the same problem, WinRAR would not open the RAR file, kept telling that the file was corrupted.

Managed to get it open with 7Zip, though, and installed. I like the cockpit, it's been a while since we saw a new purpose-built WW2 cockpit.

I am getting something strange in flight with this aircraft. It is hard to describe in words, but the center of the model seems to be some distance behind the tailfin, so in flight it rotates around a large circle, not around where the CoG of the actual aircraft is (that is, around about where the pilot is seated).

 

[Gatling20 753]

"only the pilot is not my author and I do not know who created it".  The pilot is by RussoUK.

[Wilches 1,172]

I like very very much, but some tunnings are badly needed. The hitboxes are porked. The cockpit is wonderfull. Thanks Torno!!!!

[amariani 4,881]

Turns out my version of 7z was outdated!

Thanks for the new model Torno! Only needed a little tweak for rudder control.

[Wrench 9,846]

I've not experiened control issues flying on NORMAL.

amariani, please post your rudder tweeks?

[amariani 4,881]

Ok, I replaced the rudder entries with the ones from the stock Spitfire Mk. IXc.

In the data.ini go to [Rudder]...

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
//ReverseInput=
MaxDeflection=33.8
MinDeflection=-33.8
CDdc=0.0135
Cydc=0.1671
Cldc=0.0255
Cndc=-0.0223
CydcAlphaTableNumData=37
CydcAlphaTableDeltaX=10.00
CydcAlphaTableStartX=-180.00
CydcAlphaTableData=1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000
CydcMachTableNumData=11
CydcMachTableDeltaX=0.10
CydcMachTableStartX=0.00
CydcMachTableData=1.217,1.204,1.164,1.096,1.000,0.976,0.917,0.834,0.728,0.633,0.544
CldcAlphaTableNumData=37
CldcAlphaTableDeltaX=10.00
CldcAlphaTableStartX=-180.00
CldcAlphaTableData=1.000,-0.282,-1.469,-2.418,-3.016,-3.189,-2.918,-2.234,-1.221,0.000,1.282,2.469,3.418,4.016,4.189,3.918,3.234,2.221,1.000,-0.297,-1.361,-1.795,-1.335,-0.844,-1.173,-0.915,-1.301,-1.463,-1.653,-2.122,-2.735,-3.318,-3.659,-3.620,-3.119,-2.202,-1.000
CldcMachTableNumData=11
CldcMachTableDeltaX=0.10
CldcMachTableStartX=0.00
CldcMachTableData=1.217,1.203,1.163,1.096,1.000,0.985,0.931,0.838,0.731,0.638,0.562
CndcAlphaTableNumData=37
CndcAlphaTableDeltaX=10.00
CndcAlphaTableStartX=-180.00
CndcAlphaTableData=-1.000,-0.985,-0.940,-0.866,-0.766,-0.643,-0.500,-0.342,-0.174,0.000,0.174,0.342,0.500,0.643,0.766,0.866,0.940,0.985,1.000,0.971,0.986,0.990,0.718,0.163,0.023,0.034,0.139,0.058,0.112,0.294,0.400,0.531,0.669,0.800,0.906,0.976,1.000
CndcMachTableNumData=11
CndcMachTableDeltaX=0.10
CndcMachTableStartX=0.00
CndcMachTableData=1.218,1.204,1.164,1.096,1.000,1.161,1.220,1.203,1.144,1.051,0.966
MaxControlSpeed=122.52
ControlRate=1.0
MaxControlSpeed=56.32
ModelNodeName=Rudder
ReverseModelOrientation=TRUE
RotationAxis=Y-AXIS
 

...and replace everything with...

[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
MaxDeflection=30.0
MinDeflection=-30.0
CDdc=0.0134
Cydc=0.0541
Cldc=0.0171
Cndc=-0.0304
CydcAlphaTableNumData=37
CydcAlphaTableDeltaX=10.00
CydcAlphaTableStartX=-180.00
CydcAlphaTableData=1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000,0.970,0.883,0.750,0.587,0.413,0.250,0.117,0.030,0.000,0.030,0.117,0.250,0.413,0.587,0.750,0.883,0.970,1.000
CydcMachTableNumData=11
CydcMachTableDeltaX=0.10
CydcMachTableStartX=0.00
CydcMachTableData=1.217,1.204,1.164,1.096,1.000,0.976,0.917,0.834,0.728,0.633,0.544
CldcAlphaTableNumData=37
CldcAlphaTableDeltaX=10.00
CldcAlphaTableStartX=-180.00
CldcAlphaTableData=1.000,-0.506,-1.890,-2.985,-3.661,-3.834,-3.485,-2.655,-1.445,0.000,1.505,2.889,3.985,4.661,4.834,4.485,3.655,2.445,1.000,-0.534,-1.751,-2.216,-1.620,-1.014,-1.401,-1.087,-1.539,-1.725,-1.942,-2.484,-3.188,-3.850,-4.222,-4.143,-3.525,-2.423,-1.000
CldcMachTableNumData=11
CldcMachTableDeltaX=0.10
CldcMachTableStartX=0.00
CldcMachTableData=1.217,1.203,1.163,1.096,1.000,0.985,0.931,0.838,0.731,0.638,0.562
CndcAlphaTableNumData=37
CndcAlphaTableDeltaX=10.00
CndcAlphaTableStartX=-180.00
CndcAlphaTableData=-1.000,-0.985,-0.940,-0.866,-0.766,-0.643,-0.500,-0.342,-0.174,0.000,0.174,0.342,0.500,0.643,0.766,0.866,0.940,0.985,1.000,0.971,0.986,0.990,0.718,0.163,0.023,0.034,0.139,0.058,0.112,0.294,0.400,0.531,0.669,0.800,0.906,0.976,1.000
CndcMachTableNumData=11
CndcMachTableDeltaX=0.10
CndcMachTableStartX=0.00
CndcMachTableData=1.218,1.205,1.164,1.096,1.000,1.161,1.220,1.203,1.144,1.051,0.966
MaxControlSpeed=113.81
ControlRate=4.0
ModelNodeName=Rudder
ReverseModelOrientation=FALSE
RotationAxis=Y-AXIS
 

The problem I was having was that when I tried to turn left using the rudder it would turn right instead and vise versa, also reaction was a little slow. This mod solved the problem.

[delrey 26]

Thank you very much for your effort and your time so that we can enjoy it.