mppd

Lots of information and stuff to consider. I'd like to take a crack at some of this - the Hurricane is sort of my fav. It did the majority of the work while the Spit got all the glamor (glamour...?). The fuse ID letters were a bit different in shape and position depending upon the squadron according to the dwgs/photos I have seen. I don't have references for serials - I would tend to use the same ones unless someone can present actual serials for each squadron. An entire sqdn with the reverse camo seems the only alternative. I'll play around with some of the existing texture/decal combos if I get a chance tonight (or tomorrow at any rate) to get a better handle on what is/is not possible with the existing 3D model. This would help make this great campaign even better I think. Count me in. Mike

Feel free to send me what you have and I'll see if I can help, but it sounds like there might not be any other workaround except a base texture for each squadron and perhaps an airplane letter and its own serial number. This is how many airplanes are set up nowadays - do you think that it would really cause a frame rate drop? Would be nice to see the reversed camo scheme too. I was experimenting applying the Rowan textures to the SFP1 Hurry - looks nice but probably violates every copywrite law on the books! For my own use only of course... Mike D.

Yes, go on, say it...an F-102! Sure would like to start some textures for that... Mike D.

Thanks for the offer Kevin, I'd love to see the hurry templates. The campaign provides for three squadrons with the MkI with squadron marks on the base skin with the individual acft number as a decal. I have the Rowan offering, but I'm so sold on the TW sims that I'd really like to start into the SFP1 version. Some of the Rowan features (like handling the campaign) seem a bit beyond me, but the cockpits, terrain and flight models seemed nice. Thanks again, and I hope I can come up with something that will help you all, MIke D.

I finally got around to doing a WW2 SFP1 install with the BofB Campaign/Terrain. Looks superb!! Hats off to all who contributed. Have been poking thru the Forum thread also. I also downloaded Gocad's Spitfire Markings - this is great. Is there something similar in the works for the Hurricane for BofB?? I'd be interested in jumping in to this, or working with someone if it's in the works. Thanks, Mike Druzolowski

Screenshots with permission from Enrico - soon to be released to all. Markings are for the ADWC at Tyndall, the 49th FIS at Griffiss, New York ANG and Maine ANG for starters. Mike Druzolowski

Thanks for the compliment Dave, but don't worry, still plenty of a** left. I feel lucky that my work schedule lately gives me several hours in the late afternoon to myself, plus at least one overnight per week at work to play on the computer. Happy holidays to you all, Mike D.

No one will be happier to see an F-102 available for the TW sims than me!! Looking forward to it for sure. Mike D. - Deuceman

An F-102A and TF-102A. An F-106B would be nice too! Mike D.

If you are installing this mod with all of the latest patches, just use the one provided in the sim. The old file will not work with the new patches. The patched file contains the correct flaps. Mike D.

An easy way is to do a search on your C-drive for dxdiag.exe - double click that and along with information about the Directx version you have installed, under 'display" is the info on your video card setup. The front page is the processor info. NVIDEA has a control panel that installs with the card setup - just right click on your desktop to access it - lots of settings to access and change. Without a real 3D card installed, seems that your stuck with however your on-board video presents images. Mike D.

Thanks for the recommendations. Have had good luck with NVIDEA - I may upgrade next spring. Mike

Sony, I owe you a favor - it was indeed anisotropic filtering. I set it to the max (16x) in the card control panel, and it still seems to run fine but the base textures look 300% better. I am at your service!! Thanks everyone - you are a true community. Mike D.

Gocad, Negative on Vista - just a gargen variety XP. I'll try the anisotropic filtering options and see if it makes a difference. Am I the only one with this issue? Maybe a better GeForce card is in my future... Thanks again for everyone's time, Mike

Kevin, I just made up numbers to match as well as I could for the resolution used, then stroke 2 pixels in white - then just touch up the corner pixel that was missing. These base textures are 2048 also. This would have made the serial number alone a difficult decal because of the partial white outlines (only on the green). The only downside of the decals option that I was forced to use (for display on my own computer) is that the Voodoo tail is enormously long, and a tail marking that covers the entire tail makes for a very large TGA. I'm real happy with the results (visually) but the .TGAs are like 2.78 Megs each for an 855 pixel image - which might be a problem for some folks. I'll try the anisotropic filtering options as Sony suggested. Thanks everyone, Mike

Here is a screenshot as I was doing the markings for Erikgen's upcoming F-101B - the top shot is doing the entire marking as a decal, the bottom was painted directly on the base bitmap. Both were exactly same resolution. See how much softer, and the colors quite dull on the lower shot. The background panel lines are acceptable since my eye really focuses on the decal markings. (Hope those guys don't mind that I let out a screenshot of this, but I'm trying to figure out what I can do to fix this...) Thanks, Mike

Can anyone help me with this. It is becoming more common these days to paint markings directly on the base aircraft texture bitmaps and using decals only for serial numbers. With my setup, the decals are MUCH more crisp than the markings painted on. I have tried adjusting video card settings with no difference. I am running an NVIDEA 8600 GT video card. Any in-game settings which I can change would sure be appreciated. Thanks, Mike Druzolowski

Sorry, it was CA_Stary's post. I didn't try any other fix - just this and I'm really happy with the results. I too was bothered by the white outlines, but just to have all the trees was a great improvement so I never bothered to speak up. Now it's even better. You guys are just awesome!! Thanks again, Mike Druzolowski

I tried FastCargo's recommended fix and it works GREAT for me! Many thanks, Mike D.

Very nice add on. Anyone looking into turning it into an AC-119 gunship? Thanks again, Mike D.

What's this salute called?.... Mike

Excellent, something to shoot down with F-101B, F-106, and F-102 (soon I hope). Mike D.

View File 45thTRS AH decals update This update to my WOV 45th TRS "AH" decals for Erikgen and team's excellent RF-101C fixes a couple of mistakes I made, and revises the actual size of the tailcode letters and serial numbers. As before, only 56-0166 carries the polka dot fin tip. Just drop the enclosed files into the "AH" folder in your RF-101C folder. Mike Druzolowski Submitter mppd Submitted 11/11/2008 Category F-100/F-101/F-102/F-104/F-105/F-106 Skins

Where are you guys coming up with the "LAU-10C" entry? Is this the LAU-10 without the end caps that I saw a picture of in this thread? This will save me making my own. Thanks, Mike D.