Several versions of the S-16 were produced with slight variations in the fuselage and wing configurations. This version has a flat deck behind the pilot and ailerons on both wings. It is based on my earlier versions of the Sikorsky S-16, but is a completely new plane.
The download includes 4 skins - 3 linen and one green - with appropriate decals. This plane has a fully functional cockpit. I have included my skinning templates so others can make new skins if they want.

Credits
My thanks to ojcar, who made the FM for the Sikorsky S-16.
My thanks also to Nixou, who recorded the sound for the Gnome 80hp engine.

Version 2 Notes 
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
Version 3 Notes
This is a completely new plane with new LODs, skins, and cockpit. This version has higher detail and a lower poly count than the previous version. This model also includes better detail for battle damage to the wings.

Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16 flatdeck, delete it, including the decals, and replace it with this version. The sound file remains the same.

For FE1 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. If you have the previous version, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

For FE2 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16_var".  Move the folder named "D" from the Aircraft/SikorskyS16_var folder into the Decals/SikorskyS16_var folder you just made.
If you have the previous version of the Sikorsky, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

The German Siemens-Schuckert D.I was a direct copy of captured Nieuport 17s. The most important difference was in the engine. The Siemens Schuckert Werke (SSW) D.I used a geared Siemens-Halske Sh.I engine which produced 1800rpm. The spinner nose and open bottom cowling were necessary to help cool the engine. A bigger prop required a taller landing gear.
Problems with engine production delayed the release of the SSW D.I. The Albatros D.III was already available by the time the SSW reached the front. The Albatros was a much superior plane, and was less likely to be mistaken for a French plane. The SSW D.I only served for a short time on the Western Front, they served longer on the Eastern front.
My Siemens-Schuckert D.I includes a three color camo skin, a full set of number decals, a fully functional cockpit, and damage nodes for the wings. My skinning templates and a sound file for the engine are included in the download.

Historical Notes:
I do not have a sound file for the Siemens-Halske Sh.I engine, I am using Nixou's sound for the Le Rhône 110 hp engine instead.

Credits:
My thanks to Ojcar once again for making the excellent data.ini file for this plane.
My thanks to Nixou for making the sound file for the Le Rhône 110 hp engine.

Installation instructions:
For FE1: Unzip the file and move the folder named "SiemensSchuckertD1" into the FirstEagles/Objects/Aircraft folder. If you don't already have it, move the file named "Lerhone110m1" from my Sounds folder into your Sounds folder.
For FE2: Unzip the file and move the folder named "SiemensSchuckertD1" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SiemensSchuckertD1". Move the folder named "D" from the Aircraft/SiemensSchuckertD1 folder into the Decals/SiemensSchuckertD1 folder you just made. If you don't already have it, move the file named "Lerhone110m1" from my Sounds folder into your Sounds folder.
 

The S-16 was designed by Igor Sikorsky as fighter escort for bombers and was the first Russian-built aircraft with a synchronized machine gun. The plane was small and highly maneuverable, but had a smaller engine than intended and was outclassed by German aircraft of the time.
The dual axle landing gear was designed for landings on rough ground. Several versions of the S-16 were produced with variations in engines and wing configurations. Relatively few S-16s were produced, but were used throughout the war and in the Russian Civil War.
This plane carries the markings of the Eskadra Vozdushnykh Korablei (Squadron of Air Ships), the world's first strategic bomber group.
I have included four skins, several plain linen, and one gray-green. I have included my skinning templates so others can make new skins if they want. 
Credits
And my thanks to ojcar, who created the FM to reproduce the nimble characteristics of the plane.
My thanks to Nix, who provided the sound for the Gnome 80hp engine (and revised it until I was happy.)

Historical Notes
The Russian Banner with the yellow square and two-headed eagle was the imperial banner and was not used on aircraft, but the replica in Connecticut uses it, so I used it on mine. The gray-green version uses a more accurate fuselage marking. If historical accuracy is important to you, change the decals.ini for texture set 1 to use "EVKBanner" instead of "ImperialBanner".
Wings Palette shows the gray-green plane with a red triangle on the fuselage. I believe this was a Bolshevik plane in which red was painted over the standard Russian markings. I used the standard markings on mine.

Version 2 Notes 
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.

Version 3 Notes 
I have made all new LODs, with higher detail and lower poly count, and with all new skins. Ojcar has made a new FM for this plane. 

Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16, delete it and replace it with this version, including the decals. The sound file remains the same.
For FE1 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16".  Move the folder named "D" from the Aircraft/SikorskyS16 folder into the Decals/SikorskyS16 folder you just made. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.

The Lebed 7 was a Russian copy of the British Sopwith Tabloid. It was produced in 1915 and was intended to be used as a fighter. But with an 80hp Gnome engine and wing warping controls, it was quickly outclassed and was used primarily for recon and later for training.
 
The Lebed 7 was shipped from the factory unarmed. The British plane had a machine gun mounted on the upper wing, so it isn't unreasonable to think that a Russian pilot might have tried mounting a gun on his plane. I have made a (possibly fictitious) version of the plane with a Lewis gun mounted on the top wing. 
My Lebed 7 has a fully functional cockpit, three skins - a grey paint and two clear doped linen, and a full set of number decals. My skinning templates are included.
The plane comes with a helmeted Russian pilot; instructions for installing the pilot are included. Or you can change the data.ini to use one of the stock FE pilots.
Many years ago Nixou recorded a a large number of sounds for First Eagles. I have included the sound file for the 80 hp Gnome Monosoupape engine, but you may already have it.

Credits
Thanks to Ojcar for making the data file for the Lebed 7.
Thanks to Nixou for making the sound file for the Gnome 80 hp engine.

Installation Instructions
For FE1 - Unzip the file. Move the folder named "Lebed7" into your FirstEagles/Objects/Aircraft folder. 
For FE2 - Unzip the file. Move the folder named "Lebed7" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Lebed7". Move the folder named "D" from your Aircraft/Lebed7 folder into the Decals/Lebed7 folder you just made. 

In case you don't already have it, I have included the sound file for the 80 hp Gnome engine. Move the file named "gnome80m4.wav" from my Sounds folder into your Sounds folder.
You may not need to install the pilot with helmet, it has been available for download for some time and has been included with other planes. In case you don't already have it, I have included the pilot and instructions for installing it in a separate folder included in this download.
 

Three different skins for the HB D.I (stock, dark and stock with red nose). Included are decals. Not historically 100% correct.
Extract the file into the Aircraft\Hansa_BrandenburgDI directory (you'll get folders 'Dark', 'Stock' and 'RedNose')
Add this to your Hansa_BrandenburgDI.ini file
[TextureSet001]
Directory=Stock
Name=Stock
Nation=Austria
Squadron=
Specular=0.300000
Glossiness=0.250000
Reflection=0.000000
[TextureSet002]
Directory=RedNose
Name=RedNose
Nation=Austria
Squadron=
Specular=0.300000
Glossiness=0.250000
Reflection=0.000000
[TextureSet003]
Directory=Dark
Name=Dark
Nation=Austria
Specular=0.300000
Glossiness=0.250000
Reflection=0.000000

This cockpit will repace the SPAD 13 cockpit used until now to make the stock SPAD 7 into a flyable plane. I can't find out who first converted the stock SPAD 7 into a flyable plane by using the cockpit from the SPAD 13. It seems to have been done several times over the years. The most recent version I could find was by Sinbad in 2012.
I have used parts of the cockpits I made for the SPAD 11, SPAD 16, and SPAD A.2 to make a completely new cockpit for the SPAD 7 which fits the fuselage better and has the correct number of guns. The new cockpit features fully functional gauges, throttles, rudder control, and stick. This cockpit should work with all the SPAD 7s (SPAD7_150, SPAD7_180,etc.)
NOTE - About 10 years ago, Gr.Viper made a SPAD 7 by converting the SPAD 13. MY cockpit will not work for that version since it uses the SPAD 13 plane with a revised FM. (If your SPAD 7 has two guns on the fuselage, then you are using GR.Viper's conversion and this cockpit won't fit.)

Installation Instructions for both FE1 and FE2
Do this for each SPAD 7 you want to convert:
If you have already have a flyable SPAD 7 using the SPAD 13 cockpit, delete the "cockpit" folder if it exists, and delete the SPAD7_COCKPIT.ini file. Then open my "SPAD_7" folder and place all the files - 1 folder and 1 ini file - into your folder.

If you still have the stock version, Open my "SPAD_7" folder and place all the files - 1 folder and 1 ini file - into your folder. You will also have to add the following line to the plane's ini file.
CockpitDataFile=SPAD7_cockpit.ini

As requested, I have made five streamer ribbons for First Eagles. The streamers are identified as fuel tanks and can be attached to weapons stations through the load out. 
NOTE - Since these streamers are classed as weapons, they are not animated and do not cast shadows.
Installation is a three part process - you will need to install the streamers as weapons in First Eagles - you will need to change the data.ini for each plane to create weapons stations for the streamers - you will need to create a load out for each plane to attach the streamers to the plane.
Full installation instructions for both FE1 and FE2 are included with the download. 

Hi FE Flyers!
Here is new loadout for the stock DFW C.V airplane.
 More precisely:
- 4 x PuW_12.5kg (about 50kg, this is stock bomb armament)
16 x PuW_12.5kg (about 200kg, new type of armament, made by me)
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--To install this mod, extract "DFWC5_Loadout.ini" and "DFWC5_Data.ini" files from "Loadout" folder to your "DFWC5" folder (Probably, this folder is here: C:/Program Files/ThirdWire/WWI/Objects/Aircraft )

--To uninstall, just delete the files.
 
Happy Flying!
Jackson M.