54 files
-
Airco Dh.2 for First Eagles
By Aladar
DH.2 by John 'Aladar' Dawson
FM by the incredibly helpful and talented Charles
Well folks, this is my first airplane for the SF engine, and I'm hoping it'll live up to the hopes of the community. It's been alot of fun, and I hope y'all enjoy it.
Read the Readme.txt please.
EDIT:
Thanks to BigBouncer, who posted a great tip for increasing FPS. If you don't want to redownload the file, open up DH2.ini in the readme and change CastShadow=TRUE to Castshadow=FALSE
It aughta improve the FPS. :)
4,632 downloads
-
Morane-Saulnier N “Bullet”
By p10ppy
Morane-Saulnier N Monoplane version 1.3
18 May 2007
By Vernon "p10ppy" Bowden
Please read the Installation.txt for other notes and installation instructions
2,935 downloads
-
Caproni Ca.3
By Monty CZ
Add on plane for the First Eagles The Great Air War 1918
Patch No.1 compatible
your comments are welcome at tosovsky.pavel (at) seznam.cz
Readme included.
Enjoy Monty
2,431 downloads
(14 reviews)0 comments
Updated
-
Bristol M.1C - Version 3
By Laton
Bristol M.1C by Andre Simpson Version 2A - Feb 25 2007
This is a partial re-work of my original M.1C.
The new version includes more detail on the wings, gun animation, damage nodes/graphics, revised hit boxes and collision points
and a tweaked FM. Any 3rd party skins should work fine, I've tried to match the original mapping.
- Installation -
Unzip the BristolM1C folder into your First Eagles "/Objects/Aircraft/" directory. You will need to re-install any 3rd party skins that you used on the prior version.
1,750 downloads
(7 reviews)0 comments
Updated
-
Morane-Saulnier Type L Pack
By Laton
Morane-Saulnier Type L Variants Ver.2 15 May 2007
Model by by Andre (Laton) Simpson
Skins by v. Deutschmark & Andre Simpson
FM by peter01
Please check the Readme file for other notes and installation intructions
V.2 Incorporates the new V3 FM's by peter01
1,639 downloads
(10 reviews)0 comments
Updated
-
Morane-Saulnier Type H
By Laton
Morane-Saulnier Type H Monoplane Ver.2 15 May 2007
Model by by Andre (Laton) Simpson
Skins by v. Deutschmark
FM by peter01
Please check the Readme file for other notes and installation instructions
V.2 Incorporates the new V3 FM's by peter01
1,589 downloads
(9 reviews)0 comments
Updated
-
GauntletMk1
She's not a WWI aircraft, but she's set up for FE. Definitely Beta, but if you want something with some zip against those Fokkers, well, try her out.
1,519 downloads
(7 reviews)0 comments
Updated
-
Hanriot HD1 Dual
By EmlD
November-December 2007
Hanriot HD1 Dual (2x Vickers MG)
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs
1,412 downloads
-
Savoia Pomilio SP.3
By Laton
Savoia Pomilio SP3 Ver.1 May 2007
Model & FM by Andre (Laton) Simpson
Skins by v. Deutschmark
**Thanks to the SFP1 Dev A-Team (capun, CB Productions, Charles, Kesselbrut & The Wrench) for kindly providing the front gunner 3D Mesh**
Please check the Readme for other notes and installation intructions.
1,332 downloads
(6 reviews)0 comments
Submitted
-
Avro504D
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
AVRO 504D For FIRST EAGLES
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
1,225 downloads
(2 reviews)0 comments
Updated
-
Farman Pack2
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Farman Shorthorn/Longhorn Double pack For FIRST EAGLES
MF11c and MF7 both french
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
Notes#
the shorthorn MF11c is equiped with a 360 degree mounted MG
operated by the standing observer
1,179 downloads
(3 reviews)0 comments
Updated
-
Farman Pack
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Farman Shorthorn 4 pack For FIRST EAGLES
4 versions two armed two unarmed both french and RFC
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
1,170 downloads
(4 reviews)0 comments
Updated
-
MartinsydeG100
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
------------------------------------------------------------------------------------------------
MARTINSYDE G100 "elephant" For FIRST EAGLES
revised model includes skin pack and pit
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
1,026 downloads
-
Hanriot HD1
By EmlD
November-December 2007
Hanriot HD1 (Vickers MG in the middle)
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs
985 downloads
-
Ansaldo SVA5
By Laton
Ansaldo S.V.A.5 Ver 1.1 30 April 2009
Model, Skin & FM by by Andre (Laton) Simpson
Please check the read-me for installation instructions.
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes
**1.1 - Mesh fix and changed FM
875 downloads
(3 reviews)0 comments
Updated
-
Avro504C
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
------------------------------------------------------------------------------------------------
AVRO 504C For FIRST EAGLES
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
838 downloads
-
Hanriot HD1 CAM (Italy)
By EmlD
November-December 2007
Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs
761 downloads
(6 reviews)0 comments
Submitted
-
Vickers FB5 "Gunbus"
By Stephen1918
The Vickers FB5 was the first British plane designed specifically as a fighter. It was nicknamed the "Gunbus" because the pusher style aircraft had a factory installed machine gun mounted in the front, giving the gunner a wide angle of fire.
Although underpowered for its size, the large tail surfaces made it quite maneuverable. The Gunbus was an effective fighter for its time and was used to create the first fighter squadron, the RFC No. 11 Squadron. The Vickers FB5 was quickly outclassed and replaced by other fighters but it made a lasting impression on pilots.
I have included two skins with decal ini's for both the Standard Linen used by Britain and France, as well as an early British skin with flags instead of roundels. I have also included a set of serial numbers which will be applied randomly. I have included my skinning templates for the plane and the cockpit.
Historical Notes
The serial numbers are fictitious, but in the correct range for most FB5s.
Details of the instrument panel are mostly conjecture.
Several kinds of gun mounts were used on the Gunbus, most of them required considerable upper body motion for the gunner. In First Eagles, it is not possible to animate the gunner, so my gun mount is fictitious, but at least allows the gunner some freedom of movement.
Credits
My thanks to Ojcar for once again making an excellent data file for the Vickers Gunbus.
My thanks to Nix for providing the sound for the Gnome engine
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
Installation Instructions
For FE1 - Unzip the file and move the folder named "VickersFB5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "gnome80m4.wav" into your FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "VickersFB5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "VickersFB5". Move the folder named "D" from the Airplanes/VickersFB5 folder into the Decals/VickersFB5 folder you just made. You also need to move the sound file "gnome80m4.wav" into your FirstEagles/Sounds folder.
To install the fake machine gun, follow the instructions in the file named "InstructionsForInstallingGuns".
622 downloads
(4 reviews)0 comments
Updated
-
Flyable RE8 for First Eagles Gold & First Eagles 2
By 33LIMA
Stock AI RE8 made player-flyable, for FEG & FE2. See readme for installation etc. Loadout screen locks up in FE2; will upload fix if/when found.
OFF has a Harry Tate already, RoF is about to get one. Couldn't find an RE8 for FE so made this myself.
571 downloads
-
Voisin LAS - 2 pack
By Stephen1918
The Voisin III was developed in 1914 and used throughout the war. It was produced in large numbers and was used by all the Entente powers. Although it was originally used as a fighter, reconnaissance, and ground attack plane, it was most commonly used as a bomber later in the war.
My version is the Voisin LAS with a full chord lower wing, a 9 cylinder water-cooled Salmson engine, and an 8mm Hotchkiss magine gun mounted on a tripod over the pilot.
Ojcar has created two data.ini's for the Voisin LAS, one for the 120hp engine, and one for the 150hp engine. For your convenience, I have created a completely separate plane for each. The models, decals and skins are the same, but the data.ini's and loadouts are different, with lighter bomb loads for the 120hp plane.
I have included three skinning options for each plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included my skinning templates.
I have also included decals for serial numbers which will be applied randomly.
There doesn't seem to be any standard way for the Voisin to carry its bombs, so I have included several loadouts with different sized bombs carried in different positions, with appropriate weights for each plane. (The loadout names are based on the size of the bombs, not the total loadout weight.)
Historical Notes:
The serial numbers are fictious, but in the correct range for the Voisin LAS.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Credits:
My thanks once again to Ojcar for making two excellent data.ini files for this plane.
Thanks also to Sinbad, 33Lima, and Dreamk who provided reference materials for the Voisin LAS.
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
Installation instructions:
For FE1: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create two new folders named "Voisin3_120" and "Voisin3_150". Move the folder named "D" from the Airplanes/Voisin3_xxx folders into the corresponding Decals/Voisin3_xxx folders you just made.
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".
563 downloads
(3 reviews)0 comments
Updated
-
Airco D.H.5
By Stephen1918
The Airco D.H.5 was intended to be an improved version of the D.H.2, combining the power of a forward facing prop with the forward visibility of a pusher. The reverse stagger of the wings was an unusual configuration and the strange appearance of the plane may have contributed to false rumors of its bad performance. Although a slow climber, the D.H.5's strength and maneuverability made it excellent for ground attack and light bombing missions.
I have included two skins with decal ini's for both British and Australian markings. Both use the letter decals that come with First Eagles, which you can set in the Loadout screen. The British skin allows you to also set the squadron. (The Australians all used a white stripe on the tail instead of squadron markings.) I have included a set of serial numbers which will be applied randomly.
You can also choose a light bomb load in the Loadout screen.
Historical Notes
The serial numbers are fictious, but in the correct range for most D.H.5s.
Credits
My thanks to Ojcar for once again making an excellent data file for the D.H.5.
My thanks also to Nix for providing the realistic sound file for the Le Rhône engine.
Installation Instructions
For FE1 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "AircoDH5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "AircoDH5". Move the folder named "D" from the Airplanes/AircoDH5 folder into the Decals/AircoDH5 folder you just made. You also need to move the sound file "rhone110bn4nC" into the FirstEagles/Sounds folder.
551 downloads
-
(3 reviews)0 comments
Updated
-
Airco DH4 - 2 pack
By Stephen1918
Although best known in its role as a bomber, the Airco DH4 was intended to be a general purpose airplane and was used for recon and ground support as well. Early versions were powered by a 250hp Eagle engine. Later versions were powered with a 375hp Eagle engine, which made them very effective bombers. The biggest problem with the DH4 was the gas tank placed between the pilot and gunner, which made communication between the two almost impossible.
I have uploaded two versions of the DH4 - Ojcar has created two FMs for the plane, one with the early 250hp engine, and one with the later 375hp engine.
Both planes have two skins, a brown and an olive color. Both use the letter decals that come with First Eagles (which you can set in the loadout screen) and a set of serial numbers which will be applied randomly. There are also loadouts for light, medium, and heavy bomb loads. The skins, decals, and loadouts are interchangeable for the two planes.
The skins are rather generic, I have included my skinning templates for those who wish to make better skins.
Credits
My thanks to Ojcar for once again making two excellent data files for the DH4.
My thanks also to Sinbad for providing a great deal of resource information for this plane.
Installation Instructions
The two versions can be installed separately or both together.
For FE1 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder.
For FE2 - Unzip the file and move the folders named "AircoDH4_250" and "AircoDH4_375" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create new folders named "AircoDH4_250" and "AircoDH4_375". Move the folders named "D" from the Airplanes/AircoDH4 folders into the corresponding Decals/AircoDH4 folder you just made.
515 downloads
-
Voisin Type V with 37mm cannon
By Stephen1918
The Voisin Type V was a slightly improved version of the Voisin III, with minor changes to the 150hp Salmson engine, a more streamlined nacelle, and staggered wings. It was first used in 1915, but was not a significant improvement over the Voisin III and served alongside it rather than replacing it. Some Type Vs were equipped with a a 37mm Hotchkiss cannon mounted in the nose and were successfully used for ground attack missions.
In my model, the 37mm cannon is rigged as an internal gun, so the pilot can fire it. The gunner would normally sit or stand directly behind the cannon, but I have placed him to the side so you can get a clear view of your target. As a result, some of the cockpit details have been altered, but are still reasonable.
Ojcar has created the data file for the plane, and spent some time tweaking the gun data to get it to perform more realistically. (You will have to reload between shots.)
I have included three skinning options for the plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included all my skinning templates. This is slightly different from the Voisin III and the skins are not interchangeable.
I have also included decals for serial numbers which will be applied randomly.
Historical Notes:
The serial numbers are fictious, but more or less in the correct range for the Voisin Type V.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Details of the gunner and gunner's cockpit have been altered to make it possible for the pilot to fire the gun.
Credits:
My thanks to Ojcar for making the data file for this plane, and for massaging the data for the gun to get a more realistic effect.
Installation instructions:
For FE1: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Voisin5". Move the folder named "D" from the Airplanes/Voisin5 folder into the Decals/Voisin5 folder you just made.
A note about Effects -
I have used the 37mm Hotchkiss 1885 cannon in my plane. In First Eagles, this is usually used as a ground object and the gun fire animation is quite large. If you have a slow computer, you may not be able to see the fire effect unless you have shadows turned off.
If you have downloaded p10ppy's SPAD XII, then you already have a nice fire effect for an aircraft mounted cannon (with smoke blowing back over the cockpit). The effect is in a file named "37mmSPAD.ini" in your Effects folder and is named "37mmFireEffectEnH". You can edit the GunData.ini for the 37MM_HOTCHKISS_1885 to use the better effect by changing the effect name to read:
GunFireEffect=37mmFireEffectEnH
497 downloads
(3 reviews)0 comments
Updated
-
RAF BE2c
By Stephen1918
Several variations of the BE2 were produced by the Royal Aircraft Factory from 1912 until the end of World War 1. The BE2c was introduced in 1914 and was produced in large numbers. It was designed to be a very stable plane, which was desirable in a reconnaissance plane, but not very effective for a fighter. During its service, the BE2c was used mostly for recon missions, but it sometimes served as a fighter and as a light bomber.
I have included two skins, a stock linen, and a brown paint. A full set of number decals are included for each skin. My skinning templates are included in the download.
The gunner in the BE2c sat in front of the pilot and either had multiple guns, or was able to move the gun between multiple mounts. The game engine does not allow this, so I set up the data file to limit the gunner's aim to the upper rear of the plane. However, I provided alternate lines in the FM which will allow you to widen the gunner's aim, but that makes the gun pass through the struts, and sometimes shoot through the wing.
Instructions for changing the gunner's range of motion are included in the download.
Credits
Thanks to Ojcar for making the data file for the BE2c and for providing resources for the model.
Thanks also to 33Lima and Hansa who provided resources for the cockpit and help with details of the model.
Thanks to Mike Dora for identifying and helping me fix problems with the gunner.
Thanks to Nicholas Bell for correcting the hit box coordinates for this plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "RAFBE2C" into the FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file and move the folder named "RAFBE2C" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "RAFBE2C". Move the folder named "D" from the Aircraft/RAFBE2C folder into the Decals/RAFBE2C folder you just made.
490 downloads
Sign in to follow this
Followers
0
-
Download Statistics
14,206
Files12,485
Comments26,858
Reviews