54 files
-
MartinsydeG100
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
------------------------------------------------------------------------------------------------
MARTINSYDE G100 "elephant" For FIRST EAGLES
revised model includes skin pack and pit
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
1,026 downloads
-
Airco Dh.2 for First Eagles
By Aladar
DH.2 by John 'Aladar' Dawson
FM by the incredibly helpful and talented Charles
Well folks, this is my first airplane for the SF engine, and I'm hoping it'll live up to the hopes of the community. It's been alot of fun, and I hope y'all enjoy it.
Read the Readme.txt please.
EDIT:
Thanks to BigBouncer, who posted a great tip for increasing FPS. If you don't want to redownload the file, open up DH2.ini in the readme and change CastShadow=TRUE to Castshadow=FALSE
It aughta improve the FPS. :)
4,632 downloads
-
GauntletMk1
She's not a WWI aircraft, but she's set up for FE. Definitely Beta, but if you want something with some zip against those Fokkers, well, try her out.
1,519 downloads
(7 reviews)0 comments
Updated
-
Bristol M.1C - Version 3
By Laton
Bristol M.1C by Andre Simpson Version 2A - Feb 25 2007
This is a partial re-work of my original M.1C.
The new version includes more detail on the wings, gun animation, damage nodes/graphics, revised hit boxes and collision points
and a tweaked FM. Any 3rd party skins should work fine, I've tried to match the original mapping.
- Installation -
Unzip the BristolM1C folder into your First Eagles "/Objects/Aircraft/" directory. You will need to re-install any 3rd party skins that you used on the prior version.
1,750 downloads
(7 reviews)0 comments
Updated
-
Caproni Ca.3
By Monty CZ
Add on plane for the First Eagles The Great Air War 1918
Patch No.1 compatible
your comments are welcome at tosovsky.pavel (at) seznam.cz
Readme included.
Enjoy Monty
2,431 downloads
(14 reviews)0 comments
Updated
-
Morane-Saulnier Type L Pack
By Laton
Morane-Saulnier Type L Variants Ver.2 15 May 2007
Model by by Andre (Laton) Simpson
Skins by v. Deutschmark & Andre Simpson
FM by peter01
Please check the Readme file for other notes and installation intructions
V.2 Incorporates the new V3 FM's by peter01
1,639 downloads
(10 reviews)0 comments
Updated
-
Morane-Saulnier Type H
By Laton
Morane-Saulnier Type H Monoplane Ver.2 15 May 2007
Model by by Andre (Laton) Simpson
Skins by v. Deutschmark
FM by peter01
Please check the Readme file for other notes and installation instructions
V.2 Incorporates the new V3 FM's by peter01
1,589 downloads
(9 reviews)0 comments
Updated
-
Savoia Pomilio SP.3
By Laton
Savoia Pomilio SP3 Ver.1 May 2007
Model & FM by Andre (Laton) Simpson
Skins by v. Deutschmark
**Thanks to the SFP1 Dev A-Team (capun, CB Productions, Charles, Kesselbrut & The Wrench) for kindly providing the front gunner 3D Mesh**
Please check the Readme for other notes and installation intructions.
1,332 downloads
(6 reviews)0 comments
Submitted
-
Avro504D
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
AVRO 504D For FIRST EAGLES
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
single seat "night-fighter" version....
observer front seat faired over..lewis on top wing...
notes;;;
fm- player version (hard)
slot car flyers need not apply!
other notes;
reversed rudder control on your system?;;;
open the ~~~~~_DATA.INI (right click/-open-/with notepad)
edit this entry
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=FALSE
to
[Rudder]
SystemType=CONTROL_SURFACE
InputName=YAW_CONTROL
ReverseInput=TRUE
1,225 downloads
(2 reviews)0 comments
Updated
-
Farman Pack
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Farman Shorthorn 4 pack For FIRST EAGLES
4 versions two armed two unarmed both french and RFC
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
1,170 downloads
(4 reviews)0 comments
Updated
-
Farman Pack2
By Flamer50
The contents of this zip file are the sole property of their Author,Bortdafarm who has
granted me permission to upload them to CombatAce.
Bwf.
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
Farman Shorthorn/Longhorn Double pack For FIRST EAGLES
MF11c and MF7 both french
INSTALL TO THE AIRCRAFT FOLDER...
MADE WITH 3DS MAX
BY BORTDAFARM
feel free to fart about with the bits n bobs
Notes#
the shorthorn MF11c is equiped with a 360 degree mounted MG
operated by the standing observer
1,179 downloads
(3 reviews)0 comments
Updated
-
Bristol M1c C flt 73sqn
By gambit168
Hi Guys, this is a skin i did a while back ,and put on my brothers website, i was going to upload it here also but forgot to , so here it is for any1 who doesn't have it already
420 downloads
(4 reviews)0 comments
Submitted
-
(3 reviews)0 comments
Updated
-
Hanriot HD1 CAM (Italy)
By EmlD
November-December 2007
Hanriot HD1 CAM (Italy) (Vickers MG on the leftside)
Type Biplane fighter aircraft
Manufacturer Hanriot
Designed by Pierre Dupont
Introduced June 1916
Primary users Italian Air Force
Belgian Air Force
Number built about 1200
EmlD: 3D Model, Cockpit and textures
sinbad: skins
peter01: FMs
761 downloads
(6 reviews)0 comments
Submitted
-
Farman F.30
By Stephen1918
Russia was the only country that used the French designed Farman F.30. While no other allies adopted it, the F.30 was the primary plane of the Imperial Russian Air Service and the Russians built about 400 of them at the Dux factory near Moscow beginning in 1915. It was used throughout WWI and was used by both sides during the Russian Civil Wars.
The Farman F.30 was powered my a Salmson 150hp water-cooled engine, had a single machine gun for the observer, and was said to be able to maneuver as well as the Eindeckers it faced. It was a general purpose plane, used originally as a fighter, and later for recon, artillery spotting, and light bomber missions.
My plane includes a loadout for a light bomb load. Decals and my skinning templates are included in the download.
I have included ojcar's "DummyMachineGun" data, Peter01's Lewis Machine Gun data in the download.
Warning
The Farman F.30 has a wider wingspan than First Eagles expects so you should install my "Airfields for Large Planes" available in the Combat Ace downloads area. Otherwise, when starting on the runway, your wings may be touching the wings of the planes next to you. This will cause an immediate collision and you or other planes in your flight may lose their wingtips as soon as the game starts.
Credits
Thanks to Ojcar for making the data file for the Farman F.30 and for making the data for the dummy machine gun.
Thanks also to Peter01 who made the data for the Lewis Gun.
Thanks also to Crowford who provided resources for the Farman cockpits.
Installation Instructions
For FE1 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file. Move the folder named "FarmanF30" into your FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "FarmanF30". Move the folder named "D" from your Aircraft/FarmanF30 folder into the Decals/FarmanF30 folder you just made.
You may not need to install the guns, they have been used on other planes and you may already have them. Instructions for installing the guns, if you should need them, are in a separate file included in this download.
184 downloads
(3 reviews)0 comments
Submitted
-
Ansaldo SVA5
By Laton
Ansaldo S.V.A.5 Ver 1.1 30 April 2009
Model, Skin & FM by by Andre (Laton) Simpson
Please check the read-me for installation instructions.
Also included in the release pack are the skin templates for anyone who wishes to create their own paint-schemes
**1.1 - Mesh fix and changed FM
875 downloads
(3 reviews)0 comments
Updated
-
MartinsydeS1
By Flamer50
This is the last machine that Bort' built for 1st eagles that I'm aware of.
The S1 wasn't in the original upload because it hadn't been done untill
later, by which time the both of us had pretty much left the scene.
As Bortdafarms web page is long gone, I'm adding the S1 to the collection here at CombatACE.
Disclaimer: This zip file(MartinsydeS1.zip) is the sole work and property of Bortdafarm.
Uploaded by Bwf.
289 downloads
(1 review)0 comments
Submitted
-
Sikorsky S-16
By Stephen1918
The S-16 was designed by Igor Sikorsky as fighter escort for bombers and was the first Russian-built aircraft with a synchronized machine gun. The plane was small and highly maneuverable, but had a smaller engine than intended and was outclassed by German aircraft of the time.
The dual axle landing gear was designed for landings on rough ground. Several versions of the S-16 were produced with variations in engines and wing configurations. Relatively few S-16s were produced, but were used throughout the war and in the Russian Civil War.
This plane carries the markings of the Eskadra Vozdushnykh Korablei (Squadron of Air Ships), the world's first strategic bomber group.
I have included four skins, several plain linen, and one gray-green. I have included my skinning templates so others can make new skins if they want.
Credits
And my thanks to ojcar, who created the FM to reproduce the nimble characteristics of the plane.
My thanks to Nix, who provided the sound for the Gnome 80hp engine (and revised it until I was happy.)
Historical Notes
The Russian Banner with the yellow square and two-headed eagle was the imperial banner and was not used on aircraft, but the replica in Connecticut uses it, so I used it on mine. The gray-green version uses a more accurate fuselage marking. If historical accuracy is important to you, change the decals.ini for texture set 1 to use "EVKBanner" instead of "ImperialBanner".
Wings Palette shows the gray-green plane with a red triangle on the fuselage. I believe this was a Bolshevik plane in which red was painted over the standard Russian markings. I used the standard markings on mine.
Version 2 Notes
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
Version 3 Notes
I have made all new LODs, with higher detail and lower poly count, and with all new skins. Ojcar has made a new FM for this plane.
Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16, delete it and replace it with this version, including the decals. The sound file remains the same.
For FE1 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "SikorskyS16" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16". Move the folder named "D" from the Aircraft/SikorskyS16 folder into the Decals/SikorskyS16 folder you just made. If you don't already have it, move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
483 downloads
(4 reviews)0 comments
Updated
-
Sikorsky S-16 Flatdeck
By Stephen1918
Several versions of the S-16 were produced with slight variations in the fuselage and wing configurations. This version has a flat deck behind the pilot and ailerons on both wings. It is based on my earlier versions of the Sikorsky S-16, but is a completely new plane.
The download includes 4 skins - 3 linen and one green - with appropriate decals. This plane has a fully functional cockpit. I have included my skinning templates so others can make new skins if they want.
Credits
My thanks to ojcar, who made the FM for the Sikorsky S-16.
My thanks also to Nixou, who recorded the sound for the Gnome 80hp engine.
Version 2 Notes
I have made slight changes to model, especially to the way the plane is rigged, and Ojcar has made a new FM for this plane. I have also improved the skins and made new skins for some different Russian squadrons.
Version 3 Notes
This is a completely new plane with new LODs, skins, and cockpit. This version has higher detail and a lower poly count than the previous version. This model also includes better detail for battle damage to the wings.
Installation instructions
This is a completely new plane, if you have already installed the Sikorsky S-16 flatdeck, delete it, including the decals, and replace it with this version. The sound file remains the same.
For FE1 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. If you have the previous version, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "SikorskyS16_var" into the "Aircraft" folder in the FirstEagles/Objects folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SikorskyS16_var". Move the folder named "D" from the Aircraft/SikorskyS16_var folder into the Decals/SikorskyS16_var folder you just made.
If you have the previous version of the Sikorsky, then you already have the sound file installed, otherwise you will need to move the sound file "gnome80m4.wav" into the FirstEagles/Sounds folder.
419 downloads
(2 reviews)0 comments
Updated
-
Voisin LAS - 2 pack
By Stephen1918
The Voisin III was developed in 1914 and used throughout the war. It was produced in large numbers and was used by all the Entente powers. Although it was originally used as a fighter, reconnaissance, and ground attack plane, it was most commonly used as a bomber later in the war.
My version is the Voisin LAS with a full chord lower wing, a 9 cylinder water-cooled Salmson engine, and an 8mm Hotchkiss magine gun mounted on a tripod over the pilot.
Ojcar has created two data.ini's for the Voisin LAS, one for the 120hp engine, and one for the 150hp engine. For your convenience, I have created a completely separate plane for each. The models, decals and skins are the same, but the data.ini's and loadouts are different, with lighter bomb loads for the 120hp plane.
I have included three skinning options for each plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included my skinning templates.
I have also included decals for serial numbers which will be applied randomly.
There doesn't seem to be any standard way for the Voisin to carry its bombs, so I have included several loadouts with different sized bombs carried in different positions, with appropriate weights for each plane. (The loadout names are based on the size of the bombs, not the total loadout weight.)
Historical Notes:
The serial numbers are fictious, but in the correct range for the Voisin LAS.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Credits:
My thanks once again to Ojcar for making two excellent data.ini files for this plane.
Thanks also to Sinbad, 33Lima, and Dreamk who provided reference materials for the Voisin LAS.
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
Installation instructions:
For FE1: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the two folders named "Voisin3_120" and "Voisin3_150" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create two new folders named "Voisin3_120" and "Voisin3_150". Move the folder named "D" from the Airplanes/Voisin3_xxx folders into the corresponding Decals/Voisin3_xxx folders you just made.
To install the gun, follow the instructions in the file named "InstructionsForInstallingGuns".
563 downloads
(3 reviews)0 comments
Updated
-
Voisin Type V with 37mm cannon
By Stephen1918
The Voisin Type V was a slightly improved version of the Voisin III, with minor changes to the 150hp Salmson engine, a more streamlined nacelle, and staggered wings. It was first used in 1915, but was not a significant improvement over the Voisin III and served alongside it rather than replacing it. Some Type Vs were equipped with a a 37mm Hotchkiss cannon mounted in the nose and were successfully used for ground attack missions.
In my model, the 37mm cannon is rigged as an internal gun, so the pilot can fire it. The gunner would normally sit or stand directly behind the cannon, but I have placed him to the side so you can get a clear view of your target. As a result, some of the cockpit details have been altered, but are still reasonable.
Ojcar has created the data file for the plane, and spent some time tweaking the gun data to get it to perform more realistically. (You will have to reload between shots.)
I have included three skinning options for the plane, identical except for the decals. The Italian Linen uses the Italian insignia with red and green underwing panels. The Russian Linen uses the Russian insignia and includes stripes on the tail planes. The Standard Linen can be used for all the other Entente powers. This plane uses the national markings that come with First Eagles, so you can easily change nationalities (in the Standard Linen skin only.) I have included all my skinning templates. This is slightly different from the Voisin III and the skins are not interchangeable.
I have also included decals for serial numbers which will be applied randomly.
Historical Notes:
The serial numbers are fictious, but more or less in the correct range for the Voisin Type V.
The Russians used different national markings on the tail planes, If you use my Russian skin, you will have white, blue, and red stripes on the tail planes. If you use the Standard skin for the Russians, you will get roundels on the tail planes.
Details of the gunner and gunner's cockpit have been altered to make it possible for the pilot to fire the gun.
Credits:
My thanks to Ojcar for making the data file for this plane, and for massaging the data for the gun to get a more realistic effect.
Installation instructions:
For FE1: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder.
For FE2: Unzip the file and move the folder named "Voisin5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "Voisin5". Move the folder named "D" from the Airplanes/Voisin5 folder into the Decals/Voisin5 folder you just made.
A note about Effects -
I have used the 37mm Hotchkiss 1885 cannon in my plane. In First Eagles, this is usually used as a ground object and the gun fire animation is quite large. If you have a slow computer, you may not be able to see the fire effect unless you have shadows turned off.
If you have downloaded p10ppy's SPAD XII, then you already have a nice fire effect for an aircraft mounted cannon (with smoke blowing back over the cockpit). The effect is in a file named "37mmSPAD.ini" in your Effects folder and is named "37mmFireEffectEnH". You can edit the GunData.ini for the 37MM_HOTCHKISS_1885 to use the better effect by changing the effect name to read:
GunFireEffect=37mmFireEffectEnH
497 downloads
(3 reviews)0 comments
Updated
-
Vickers FB5 "Gunbus"
By Stephen1918
The Vickers FB5 was the first British plane designed specifically as a fighter. It was nicknamed the "Gunbus" because the pusher style aircraft had a factory installed machine gun mounted in the front, giving the gunner a wide angle of fire.
Although underpowered for its size, the large tail surfaces made it quite maneuverable. The Gunbus was an effective fighter for its time and was used to create the first fighter squadron, the RFC No. 11 Squadron. The Vickers FB5 was quickly outclassed and replaced by other fighters but it made a lasting impression on pilots.
I have included two skins with decal ini's for both the Standard Linen used by Britain and France, as well as an early British skin with flags instead of roundels. I have also included a set of serial numbers which will be applied randomly. I have included my skinning templates for the plane and the cockpit.
Historical Notes
The serial numbers are fictitious, but in the correct range for most FB5s.
Details of the instrument panel are mostly conjecture.
Several kinds of gun mounts were used on the Gunbus, most of them required considerable upper body motion for the gunner. In First Eagles, it is not possible to animate the gunner, so my gun mount is fictitious, but at least allows the gunner some freedom of movement.
Credits
My thanks to Ojcar for once again making an excellent data file for the Vickers Gunbus.
My thanks to Nix for providing the sound for the Gnome engine
Version 2 - Ojcar has created a new FM which improves the fighting performance of the AI. A fake machine gun has been added which causes the pilot of AI planes to be more active in pursuing enemy aircraft. Installation instructions for the new gun are in a separate file.
Installation Instructions
For FE1 - Unzip the file and move the folder named "VickersFB5" into the FirstEagles/Objects/Airplanes folder. You also need to move the sound file "gnome80m4.wav" into your FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "VickersFB5" into the FirstEagles/Objects/Airplanes folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "VickersFB5". Move the folder named "D" from the Airplanes/VickersFB5 folder into the Decals/VickersFB5 folder you just made. You also need to move the sound file "gnome80m4.wav" into your FirstEagles/Sounds folder.
To install the fake machine gun, follow the instructions in the file named "InstructionsForInstallingGuns".
622 downloads
(4 reviews)0 comments
Updated
-
Russian Morane H
By Trotski
Just a little rework of the previously uploaded MS.H in Russian markings, I have just tweaked the skins a little, and added decals instead of the pre printed insignia, just a personal preference.
I have included the sound files, and the decals needed for this aircraft.The only thing I would like to improve is the addition of a windscreen, as per the Pfalz EI , but that is beyond my abilities.
The only little Glitch I have encountered is the decal seems to show slightly on the wing tip, cant seem to solve that problem, but it isnt that bad anyhow. I tried to place the wing decals further inboard, but for some reason the Starboard wing doesnt accept this, but I dont think it looks too shabby.
just follow all the usual malarkey for installing to FE, or indeed just use the skins if you already have the A/C installed.
As I have said, this is just a tweak of the original skin, so all thanks to everyone who went before me in designing the A/C and for giving me the idea to tweak it !!!
166 downloads
(0 reviews)0 comments
Updated
-
Hanriot HD.2
By Stephen1918
The Hanriot HD.2 was a French, single seat float plane version of the Hanriot HD.1. It had a larger tail, shorter wings, and mounted 2 Vickers machine guns. It was used by the French as an interceptor, defending seaplane bases, and as an escort for reconnaissance planes.
Since it's a float plane, the Hanriot HD.2 works best in the North Sea terrain, or in Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground.
I have included two skins, a generic linen skin and a 4 color camo skin. The camo skin may be fictitious and uses the French 4 color camo pattern, but with blue and grey colors instead of greens and browns. I have included a set of decals. My skinning templates are included with the download.
Credits
Thanks to Ojcar for making the data file for the Hanriot HD.2 and for providing information for the cockpit.
Thanks to Nix for providing the sound for the engine.
Installation Instructions
For FE1 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.
For FE2 - Unzip the file and move the folder named "HanriotHD2" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "HanriotHD2". Move the folder named "D" from the Aircraft/HanriotHD2 folder into the Decals/HanriotHD2 folder you just made. You also need to move the sound file "clerget9b2m2.wav" into the FirstEagles/Sounds folder.
269 downloads
(2 reviews)0 comments
Updated
-
RAF BE2e
By Stephen1918
The BE2e was an improved variant of the BE2c introduced in 1916. It had a longer upper wing and a shorter lower wing with a single set of struts. It also had a slightly smaller horizontal tail. The new configuration improved the plane's maneuverability, but did little to improve its overall performance. I have included a light bomb load, but the plane's rate of climb suffers somewhat when carrying bombs.
I have included two skins, a green paint (PC10), and a brown paint (PC12). A full set of number decals and my skinning templates are included in the download.
The gunner in the BE2e sat in front of the pilot and either had multiple guns, or was able to move the gun between multiple mounts. The game engine does not allow this, so I set up the data file to limit the gunner's aim to the upper rear of the plane. However, I provided alternate lines in the FM which will allow you to widen the gunner's aim, but that makes the gun pass through the struts, and sometimes shoot through the wing.
Instructions for changing the gunner's range of motion are included in the download.
Credits
Thanks to Ojcar for making the data file for the BE2e and for testing and helping with details of the model.
Thanks to Mike Dora for identifying and helping me fix problems with the gunner.
Thanks to Nicholas Bell for correcting the hit box coordinates for this plane.
Installation Instructions
For FE1 - Unzip the file and move the folder named "RAFBE2E" into the FirstEagles/Objects/Aircraft folder.
For FE2 - Unzip the file and move the folder named "RAFBE2E" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "RAFBE2E". Move the folder named "D" from the Aircraft/RAFBE2E folder into the Decals/RAFBE2E folder you just made.
324 downloads
(4 reviews)0 comments
Updated
Sign in to follow this
Followers
0
-
Download Statistics
14,211
Files12,493
Comments26,862
Reviews