8 files
-
SF2 UH-1B Huey Slick & Hog Remod Pack
By Wrench
SF2 UH-1B Huey Slick & Hog Remod Pack 9/14/2022
-For SF2 (Full 4/5 Merged Reccomended)-
This package contains remods of Pasko's 1stGen UH-1B helicopters, both the 'Slick' and 'Hog' gunships. These aircraft have been given unique name identifiers, as to not have the conflict with other mods of these same birds.
I've collected just about all the 1stGen skins I could find for these, and created all new decals for them. Where possible, and discoverable, any serial/BuNums associated with a particular unit have been marked with a star (*). All serials ARE historically correct for the models depicted. In the case of the Canadian Hueys, no "(*) star" is used as the 10 serials ARE the 100% historically correct ones. This mod depicts several models of the UH-1B that are visually "pretty close" to each other. In truth, their minor differences won't effect gameplay in any way, shape or form. These are the UH-1B, UH-1C and UH-1E. Decal randomization is TRUE for all skins.
UH-1B Slick ==
US Army; early and late skins (dark or lighter OD)
US Army Medevac: possibly representing 57th Medical Detachment
USMC : VM0-2 "Cherry Deuce" (used both Slicks & Hogs)
Canada: CF-118 3 skins covering their uses and from 1966 thru 1995 in their Search & Rescue and utility service.
UH-1B/C/E Hog ==
US Army; early and late skins (dark or lighter OD)
US Navy: HAL-3 Seawolves
USMC: HML-167 "Warriors, VMO-6 "Tomcats",
The sF2 'date switch' is fully active, so watch for it. Also included are (finally) damage textures, a destroyed model, all weapons, sounds, pilot figures and so forth. The "275rocket" is a stock 3W item, and therefore not included. FM is relatively untouched (ie: "as is"), so be aware. I'm sure further refinements of the FM are needed.
On the aircraft selection drop-down menu, you'll see:
UH-1B/C/E Huey "Slick" (P)
UH-1B/C/E Huey "Hog" (P)
Obviously, the "P" stands for Pasko.
As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. PLEASE read them, before installing!!! Also =PLEASE= read the "Notes" section for information about Nation assignment for the American birds. Where possible, ALL original readmes have been included.
Happy Landings!
Wrench
Kevin Stein
286 downloads
-
SF2 Bell TH1-L Huey Remod Pack
By Wrench
SF2 Bell TH1-L Huey Remod Pack 4/30/2021
-For SF2 =ONLY= (Full 4/5 Merged Recommended)
This is an update/remod back of the TH1-L Huey trainer as used by Helicopter Training Squadron 18 (HT-18) "Vigilant Eagles" from 1969 thru 1998(ish). The original SF1 upload, from 2005, has recieved something of an overhaul, mostly to the skin, and now with the addition of 100% historical BuNum (serials) and Modex/pennant numbers.
Extensive research has allowed me to run down the full 45 aircraft production run, as used by both HT-8 and HT-18. All serials are 100% historically correct. when possible, they have been matched to their Modex/Pennant numbers. Those with the star (*) on the Number list are positives matches. Those without the star, could not be matched to a specific Modex.
This is the full aircraft, with all necessary parts included (sounds, pilots, etc). A new Hangar Screen was created, as well as damage tgas and the addition of a destroyed model. The data ini has had the hit boxes corrected. The FM itself remains untouched from it's original "as issued" state. Be advised of continuing issues with helo FMs in SF2. The Standard Animation Keystroke (tm), shift/0 (zero) opens the sliding cabin doors.
When in game, on the aircraft selection drop down you'll see:
TH-1L Huey
As is always recommended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. PLEASE read them, before installing!!! The full Change Log is also in the "Notes" section. The original release readme from 2005 is also included, for historical purposes.
Happy Landings!
Wrench
Kevin Stein
82 downloads
(1 review)0 comments
Submitted
-
UH-1H Huey. SF2. V1
By yakarov79
Bell UH-1H Iroquois
This is a third party add-on of Bell helicopter model UH-1H used by US Army Aviation and many many countries around the world.
It is designed for and works only in SF2 series. And will never work in SF1.
*************************************************************
This is FREEWARE-DONATIONWARE and it CANNOT be distrubuted unless permissions are granted by myself.
The original readmes, if any, and all other pieces of the package MUST remain intact.
The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
This package and any part of it may NOT in any way, shape or form be used in any payware additions.
Bribes and donations are accepted;
*************************************************************
*************************************************************
THIS AIRCRAFT MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
OR WITH ANY OTHER FILES OR MODS.
*************************************************************
Jarek Hereda
---------------------------------------------------------------------------------------------------
Copy all files to specific folders in your game mod directory.
ANIMATION 1 & 2 - cockpit doors.
open bomb bay - open cargo doors - you will figure out why/how etc.
This is beta file. Some small ini edits might be needed.
I was planning to make it bigger but I've lost 'thing' for it..but of course you can play with it.
For now and in near future I will not work on it - so honestly, I am abandoning it.
Better to share than keep it on a hard drive.
Aircraft include my generic Bell Huey cockpit.
Pack includes one helicopter with 1 very generic skin and PSD templates so anyone can create any skin desired.
Flying.
As with all my previous helos flying is quite easy. With little practice, you can even hoover. Without fake flaps and airbrakes.
Important here to control is using rudder and vector thrust control.
Normally throttle vector control on 88-89 degree increase power 55% wait little and then increase to 100% and helo will take off nicely.
Have fun.
Hope you will enjoy it same as me when working on it.
Edit and report bugs.
Jarek Hereda.
1,051 downloads
-
HH-1H Iroquois
By yakarov79
Bell HH-1H Iroquois
This is a third party add-on of Bell helicopter model HH-1H used by USAF as Crash Rescue helicopter.
It is designed for and works only in SF2 series. And will never work in SF1.
*************************************************************
This is FREEWARE-DONATIONWARE and it CANNOT be distrubuted unless permissions are granted by myself.
The original readmes, if any, and all other pieces of the package MUST remain intact.
The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
This package and any part of it may NOT in any way, shape or form be used in any payware additions.
See the original readme documentation, if any, for further allowances and restrictions
Any persons wishing to make further modifications, contact me first.
Any persons wishing to make further modifications MUST remember to put everyone's name in it.
Bribes and donations are accepted;
*************************************************************
*************************************************************
THIS AIRCRAFT MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
OR WITH ANY OTHER FILES OR MODS.
*************************************************************
Jarek Hereda
---------------------------------------------------------------------------------------------------
Copy all files to specific folders in your game mod directory.
ANIMATION 1 & 2 - cockpit doors
ANIMATION 8 - unfold hoist
ANIMATION 9 - PJ on a winch
ANIMATION 10 - lower/raise hoist.
This is beta file.
Better to share than store on hard drive.
Aircraft include generic Bell Huey cockpit.
Flying.
As with all my previous helos flying is quite easy. With little practice, you can even hoover. Without fake flaps and airbrakes.
Important here to control is using rudder and vector thrust control.
Normally throttle vector control on 88-89 degree increase power 55% wait little and then increase to 100% and helo will take off nicely.
Pack includes one helicopter with 1 skin
Have fun.
Hope you will enjoy it same as me when working on it.
Edit and report bugs.
Jarek Hereda.
222 downloads
(2 reviews)0 comments
Submitted
-
CH-118 Iroquois. SF2.
By yakarov79
Bell CH-118 Iroquois
This is a third party addon of Bell helicopter model CH-118 used by Canadian Armed Forces.
It is designed for and works only in SF2 series. And will never work in SF1.
*************************************************************
This is FREEWARE-DONATIONWARE and it CANNOT be distrubuted unless permissions are granted by myself.
The original readmes, if any, and all other pieces of the package MUST remain intact.
The names of all contributors, modders, suppliers, etc =MUST= be listed in any new readmes.
This package and any part of it may NOT in any way, shape or form be used in any payware additions.
See the original readme documentation, if any, for further allowances and restrictions
Any persons wishing to make further modifications, contact me first.
Any persons wishing to make further modifications, MUST remember to put everyone's name in it.
Bribes and donations are accepted;
*************************************************************
*************************************************************
THIS AIRCRAFT MOD OR ANY PART OF IT MUST NOT BE HOSTED OR
POSTED FOR DOWNLOAD ON ANY OTHER WEB SITE WITHOUT MY EXPRESS
PERMISSION, OR USED FOR ANY OTHER PURPOSE THAN THIRDWIRE FLIGHT
SIMULATORS, AND MUST NOT BE SOLD OR OFFERED FOR SALE BY ITSELF
OR WITH ANY OTHER FILES OR MODS.
*************************************************************
Jarek Hereda
---------------------------------------------------------------------------------------------------
Copy al files to specific folders in your game mod directory.
ANIMATION 1 & 2 - cockpit doors
ANIMATION 8 - unfold hoist
ANIMATION 9 - PJ on a winch
ANIMATION 10 - lower/raise hoist.
This is beta file.
Better to share than store on hard drive.
Aircraft include generic Bell Huey cockpit.
Flying.
As with all my previous helos flying is quite easy. With little practice, you can even hoover. Without fake flaps and airbrakes.
Important here to control is using rudder and vector thrust control.
Normally throttle vector control on 88-89 degree increase power 55% wait little and then increase to 100% and helo will take off nicely.
Pack includes one helicopter with 3 skin for specific years to represent paintings used by Canadian Armed Forces.
Have fun.
Hope you will enjoy it same as me when working on it.
Edit and report bugs.
Jarek Hereda.
173 downloads
(1 review)0 comments
Submitted
-
UH-1B, D & E of YAP for SF2V
UH-1B, D & E of YAP for SF2V v0.1 by FANATIC MODDER
I converted the YAP data.ini of
- UH-1B Gunship
- UH-1B Heavy Hog
- UH-1D
- UH-1E
for use in the sf2.
More in detail,
- I modified the powerplant lines so it doesn't crash anymore.
Furthermore, more realistic feel, closer to a real helicopter.
Accurate power data.
- Gunner animation now more realistic.
The UH-1E right gunner is finally moving.
- The Helo_Destroyed.LOD line is added.
I am sure most you have this LOD added..
Why v0.1?
LOTs of things are needed to be done if we can say that they be upgraded
to proper sf2 standards.
The FM still needs a lot of tuning, since empty masses are wrong,
as are aerodynamic Coef etc. They can go up to 250 km/h top speed but don't be fooled,
it's not because of excess power...
Be in mind that these are NOT complete add-on, just corrected data.ini for sf2 use.
You need to go the Yankee air pirate webpage to donwload them. The -B/D models are part
of the basic pack, however if you want the -E you need to download exp pack 3 or helipack 1.
The way they are they may be not perfect for playing a campaign with them,
however are more than adequate as AI additions to vietnam missions/campaigns.
The credit go to
- YAP for the complete model
- Yakarov79 for his help to make them sf2 compatible.
573 downloads
- yap
- helicopters
- (and 4 more)
-
UH-1B Gunship Upgrade Pack
By Kesselbrut
Bell UH-1B "Huey" Gunship Conversion Pack
for Strike Fighters 2
ver 1.0
by Kreelin (FM), Kesselbut (cockpit, Pilots, ini-modding), Richard (Skins)
Installation:
1) Extract everything contain in this package to your ..\mods\ folder
2) Download Richards (Gramps) Astralian UH-1H here:
http://combatace.com/files/file/2567-australian-army-uh-1h-huey/
copy following files from this pack into your ..MODS\Objects\Aircraft\UH-1_Gunship folder
UH-1B.LOD
UH-1B_001.LOD
UH-1B_002.LOD
UH-1B_shadow.SHD
Using:
Use the "HUD_MODE" Key to switch between cockpit positions.
Use the "Fire secondary Gun" Key to fire the Doorgunner MG
Keys for thrust vectoring have to be defined.
This is a freeware addon package. Use it at your own risk.
Modders can use the pack (or parts of it - excluding the flightmodel and skins) without my permission.
Please name me in the readme and take proper credit.
For the using of the flightmodel or skins please contact Kreelin or Richard (Gramps)
Commercial using in any way - including parts of the pack - for everyone is stricktly forbidden.
Daniel "Kesselbrut" Himmel
Have fun :)!
1,338 downloads
-
UH-1H Bushranger Gunship
By harryleith
UH-1H Bushranger Gunship for SF2
By Harry Leith
This aircraft represents the Bushranger Gunship version of the UH-1H Huey helicopter operated by the Australian Defence Forces. It is fitted with 2x M134 Miniguns and 2x Rocket Launchers fixed forward.
I haven't been able to model the mountings for the weapons, so the LAU/3 rocket pods just sort of hang in space alongside the aircraft, and the miniguns can't be seen at all. However they do work, which is the main thing!
This mod has been tested in a merged install of SF2. Weapons are in SF2 format. I haven't modified the FM at all from the original release, so I make no guarantees about flight performance.
Installation.
This package is only a partial mod. It requires you to have the Australian Army UH-1H Huey by Richard "Gramps" Kaminski already installed. You can find it here:
http://forum.combata...rmy-uh-1h-huey/
This mod contains replacement aircraft data files for that helo, adding the weapons and converting it to the Bushranger gunship variant.
Copy the following files to the UH-1H folder located in the Aircraft directory inside the Objects folder in your game install, replacing the originals.
UH-1H.ini
UH-1H_DATA.INI
UH-1H_Loadout.INI
UH-1H_BUSHRANGER_LOADOUT.tga
There is also a M134 folder for the M134 miniguns which should be placed in the Guns folder in the Objects folder. If the Guns folder doesn't already exist in the Objects folder, you can create it. This weapon is in SF2 format, so will not work for SF1 users.
Credits
I have left the original read-me file intact with this install.
Bell UH-1B Iroquis "Huey" for Strike Fighters Project 1 ver 1.0 2005-4-18 by Capun (FM), MarcFighter (skin), Kesselbut (cockpit) and Pasko (model)
UH-1H Mod by Richard "Gramps" Kaminski 23 April 2006.
If I have missed anyone for credit, please contact me via Combat Ace.
921 downloads
Sign in to follow this
Followers
0