First Eagles - WWI and Early Years 1914 - 1920

Nieuport 24bis skins of Escadrille 561 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 24bis used by Escadrille 561 on Venice, Italy from 1917 to 1918.
To be used with the campaign "Armchair Aces Over Italy" by Ojcar.
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
Many serial numbers are historicals, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 4 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 04.jpg      <------ add this line to use the fourth option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC561b
Name=Escadrille 561
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of 79a Squadriglia for EmID Nieuport N27_FAS First Eagles 2
This is a  pack of skins focused on the history of the Italian 79a Squadriglia. 
Historical notes: 
79a Squadriglia of the "Corpo Aeronautico Militare" was formed in November 1916 at the Central Flying School in Arcade, Italy. 
On 13 January 1917, it was deployed to Istrana, with its area of operations being the Asiago Plateau near the ongoing Battles of the Isonzo. 
The new unit flew its first combat mission on 20 January 1917. On 28 March 1917, 3a Sezione was detached for city defense duties. On 10 April 1917, the squadron was attached to 10o Gruppo. A month later, it was transferred to 7o Gruppo. On 2 June 1917, Antonio Reali scored his first aerial victory for the squadron's initial success. On 3 December 1917, the squadron was posted to the 15o Gruppo. In June 1918, it was assigned to the Massia da Caccia (Fighter Mass) before passing to control of the 23o Gruppo. 
The squadron served through war's end. Its wartime record was 4,411 combat sorties flown, with 47 victories achieved in 227 aerial combats. The squadron had suffered five killed. The squadron produced the WW1 Nieuport 27 "Ace of Aces" Marziale Cerutti with 17 victories with this Nieuport model.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
** What you will find in this Nieuport 27 skin Pack:
- A full set of skins & decals markings to Nieuport 27s used by 79a Squadriglia in 1917 / 1918. 
  Some serial numbers to those planes are historicals others not.
- A full squadron (79a Squadriglia) with 101 historical & fictional serial numbers. 
- A special skin folder focusing on Sergente Marziale Cerutti the Nieuport 27 Ace of Aces. 
- A special skin folder focusing on Nieuports of 79a Squadriglia with 101 historical & fictional serial numbers. 
Representing the 79a Squadriglia in late 1918 when Capitano Arturo Freddi Cavallotti (17 October 1918) become their commander and adopted the "She-wolf of Rome" as squadron insignia.
- New textures for the N27_FAS cockpit with new italian instruments 
- 5 New optional hangar screenS for 79a Squadriglia in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=79HANGARSCREEN 01.jpg      <------ add this line to use the first option.
[AircraftData]
HangarScreen=79HANGARSCREEN 02.jpg      <------ add this line to use the second option.
[AircraftData]
HangarScreen=79HANGARSCREEN 03.jpg      <------ add this line to use the third option.
[AircraftData]
HangarScreen=79HANGARSCREEN 04.jpg      <------ add this line to use the fourth option.
[AircraftData]
HangarScreen=79HANGARSCREEN 05.jpg      <------ add this line to use the fifth option.
__________________________________________________________________________________________________________
- I painted new textures for the cockpit, with a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
- Releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
- I set the 1024x1024(JPG & TGA) as standard for the planes. 
*OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=79 Squadriglia
Name=79 Squadriglia
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=79 Squadriglia(Later)
Name=79 Squadriglia(Later)
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=Marziale Cerutti
Name=Marziale Cerutti
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, cockpit and hangar screens.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of Padua Air Defense Flight for Nieuport N27_FAS First Eagles 2

Historical notes: 
Unidentified italian Nieuport 27, possibly aircraft of Padua Air Defense Flight, with a light silver-dope pattern, darked tail, probably black or red and a winged devil fuselage insignia. Picture possibly taken in Padua. 
Source: "Nieuport 24/27 at war!" by Paolo Varriale.
__________________________________________________________________________________________________________
** What you will find in this Padua Air Defense Flight Nieuport 27 skin pack:
- A skin & decals to Nieuport 27 used by Padua Air Defense Flight in Italy 1918. Serial number fictional.
- Two optional folders one with a red tail & other in black. 
- New textures for the N27_FAS cockpit with new italian instruments. 
- 2 New optional hangar screenS for Padua Air Defense Flight in 1920x1200 size. You will find this in the "HANGAR SCREENS" folder. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
To use the Nieuport with black tail
[AircraftData]
HangarScreen=HANGARSCREEN ITALY1.jpg       <------ add this line
__________________________________________________________________________________________________________
To use the Nieuport with red tail
[AircraftData]
HangarScreen=HANGARSCREEN ITALY2.jpg       <------ add this line
__________________________________________________________________________________________________________
- I painted new textures for the cockpit, with a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
- Releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
- I set the 1024x1024(JPG & TGA) as standard for the planes. 
*OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=Padua ADF
Name=Padua Air Defence Flight
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, cockpit and hangars.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of 81a Squadriglia for EmID Nieuport N27_FAS First Eagles 2
This is a  pack of skins focused on the history of the 81a Squadriglia. 
Historical notes:  81a Squadriglia of the "Corpo Aeronautico Militare" was founded at the Central Flying School in Arcade, Italy in March 1917. The squadron was displaced at the Battle of Caporetto. 81a Squadriglia joined 6o Gruppo at Istrana. The move would put them in position for the great air battle over their base on 26 December 1917. 
In February 1918, the squadron began replacing its Nieuport 17s with Hanriot HD.1s. Hanriot supplies being insufficient, some Nieuport 27s were also brought on strength. The squadron served on through Summer 1918. Then, on 26 October 1918, it was included in the Massa da Caccia (Fighter Mass) that supported the victorious final Italian offensive at Vittorio Veneto. When the war in northern Italy ended on 3 November 1918, the 81a Squadriglia had flown 4,118 combat sorties, engaged the enemy 230 times, and were credited with 34 aerial victories. The squadron suffered four dead. It still had 21 Hanriots and a Nieuport 27 in service.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
** What you will find in this Nieuport 27 skin Pack:
- A full set of skins & decals to Nieuport 27s used by 81a Squadriglia in 1918. 
Some serial numbers to those planes are historicals others not.
- A full squadron (81a Squadriglia) with 101 historical & fictional serial numbers.
- A special skin folder focusing on Sergente Carlo Corti with 2 confirmed victories & his Ni.11339 Aces card.   
This Nieuport was pictured in Casoni airfield, Italy, early summer of 1918.
- A special skin folder with one Unidentified Nieuport 27 flown by 81a Squadriglia with a Aces card markings, serial number & pilot unknown.
- New textures for the N27_FAS cockpit with new italian instruments. 
- 2 New optional hangar screenS for 81a Squadriglia in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=81HANGARSCREEN 01.jpg       <------ add this line to use the first option.
[AircraftData]
HangarScreen=81HANGARSCREEN 02.jpg       <------ add this line to use the second option.
__________________________________________________________________________________________________________
- I painted new textures for the cockpit, with a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
- Releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
- I set the 1024x1024(JPG & TGA) as standard for the planes. 
*OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=81 Squadriglia
Name=81 Squadriglia
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=81 Squadriglia (Silver dope)
Name=81 Squadriglia (Silver dope)
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=Carlo Corti
Name=Carlo Corti
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, cockpit and hangar.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins (K.u.K LFT) for EmID Nieuport N27_FAS First Eagles 2
Historical notes:
Austro-Hungarian K.u.K LFT - Kaiserliche und Königliche Luftfahrtruppen (The Imperial and Royal Aviation troops)
This is a pack with two Nieuport 27 skins, captured by K.u.K LFT at the Italian Front. These Nieuport 27s were flown before by the Italian 81a Squadriglia in late 1917/early 1918. Both planes were captured intact and posted to fly by K.u.K LFT.
__________________________________________________________________________________________________________
** What you will find in this Nieuport 27 skin Pack:
- A full set of two skins & decals to Nieuport 27s used by K.u.K LFT
I painted the pilot's personal marking (horse & Horseshoe) as far was possible to see, according to the Nieuport picture.
- Both skins with diferents fuselage pattern styles, that you will find in the "OPTIONAL FOLDERS". To use, just copy the inside contend to your "N27 Austrian folder" / "N27 Austrian 2 folder" and let the replace.  
- two (2) optional hangar screens for K.u.K LFT in 1920x1200 size. You will find this in the "HANGAR SCREEN" folders. for each aircraft. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder or N27_aircraft main folder. 
Next, edit your N27_FAS.ini file or or N27.ini file, and add this line:

For N27
[AircraftData]
HangarScreen=N27_Austria-HANGARSCREEN.jpg           <------ add this line
For N27_FAS
[AircraftData]
HangarScreen=N27_FAS-Austria-HANGARSCREEN.jpg       <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS for N27_FAS skins:
FE2 INSTALLATION
(SKINS)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 

*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=N27 Austrian
Name=N27 Austrian
Nation=Austria
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=N27 Austrian 2
Name=N27 Austrian 2
Nation=Austria
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed.
----------------------------------------------------------------------------------------------------------
INSTALLATION INSTRUCTIONS for N27 skin: 
FE2 INSTALLATION
(SKINS)
- Drop or copy the folder "N27" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your N27.ini that you find in your Aircraft folder.
[TextureSetXXX]
Directory=N27 Austrian 2
Name=N27 Austrian 2
Nation=Austria
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27.ini" file order for others skins that you have already installed.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, N27, cockpit and hangars.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 models.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Geezer French pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2. 
This pack presents some french Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for french uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Jean Navarre) or generic names such as FRENCHPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this French pilots skin Pack:
- 6 French Aces: 
- Georges Guynemer  (Geezer wwiPilotNew5) 
- René Fonck               (Geezer wwiPilotNew5) 
- Jean Navarre            (Geezer wwiPilotNew5) 
- Charles Nungesser (Geezer wwiPilotNew5) 
- Michel Coiffard       (Geezer wwiPilotNew5) 
- Gabriel Guérin         (Geezer wwiPilotNew5) 
- 7 French pilots with a generic face and several options for french uniforms and different scarf colors at your choice.
- FRENCHPILOT1 (Geezer wwiPilotNew5) 
- FRENCHPILOT2 (Geezer wwiPilotNew7) 
- FRENCHPILOT3 (Geezer wwiPilotNew4) 
- FRENCHPILOT4 (Geezer wwiPilotNew4) 
- FRENCHPILOT5 (Geezer wwiPilotNew4)
- FRENCHPILOT6 (Geezer wwiPilotNew5)
- FRENCHPILOT7 (Geezer wwiPilotNew8) 
- 3 French Aces: Georges Guynemer, Michel Coiffard & Charles Nungesser, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to french service colors. 
- wwiPilotNew16 - Charles Nungesser   - (Geezer wwiPilotNew1)
- wwiPilotNew27 - Michel Coiffard          - (Geezer wwiPilotNew1)
- wwiPilotNew32 - Georges Guynemer   - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "FRENCH PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (FRENCH PILOTS INSTALLATION README) with installation instructions for the majority of French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (Breguet14_FRANCE) Aircraft folder and find the "Breguet14_FRANCE_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with Breguet14_FRANCE
// Crew -----------------------
[Pilot]
PilotModelName=FRENCHPILOT2 <------------------------------------ You must add this line
Position=0.0,-1.07,0.88                     <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for French pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Nieuport 24 skins of Escadrille 561 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 24 used by Escadrille 561 on Venice, Italy from 1917 to 1918.
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
You will also find two types of paint patterns for the Nieuports used by Escadrille 561, one in silver-dope and other in french pattern camouflage. This enables a mix of different types when you fly single missions.
Many serial numbers are historical, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________ 
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 3 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 561
Name=Escadrille 561 (Silver Dope)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561a
Name=Escadrille 561 (Camo)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

The Blue Max Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from The Blue Max film.
- Fokker Dr.1 flown by the character Bruno Stachel.        (Several versions)
- Fokker Dr.1 flown by the character Willi von Klugermann. (Several versions)
The character Bruno Stachel used two Fokkers in the Blue Max film, one with the cowling painted full black and other with the
cowling tip in black. 
You will find both of them in the skin pack.
- I did Optional hangar screens for Bruno Stachel and Willi von Klugermann characters. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Bruno Stachel
Name=Bruno Stachel
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Willi von Klugermann
Name=Willi von Klugermann
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Stachel HANGAR 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Geezer RNAS-RAF pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RNAS-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for different scarf colors and a RNAS-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Robert Little) or generic names such as RNAS-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RNAS-RAF pilots skin Pack:
- 6 RNAS-RAF Aces: 
- Arthur Roy Brown        (Geezer wwiPilotNew5) 
- Bruno De Roeper         (Geezer wwiPilotNew5) 
- Geoffrey Siedle            (Geezer wwiPilotNew5) 
- Lawrence Coombes    (Geezer wwiPilotNew5) 
- Raymond Collishaw    (Geezer wwiPilotNew5) 
- Robert Little                  (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Colin MacLaren      (Geezer wwiPilotNew5)

- 6 RNAS-RAF pilots with a generic face and several options for different scarf colors and a RNAS-RAF uniform at your choice.
- RNAS-RAF PILOT1 (Geezer wwiPilotNew1) 
- RNAS-RAF PILOT2 (Geezer wwiPilotNew4) 
- RNAS-RAF PILOT3 (Geezer wwiPilotNew7) 
- RNAS-RAF PILOT4 (Geezer wwiPilotNew8) 
- RNAS-RAF PILOT5 (Geezer wwiPilotNew5)
- RNAS-RAF PILOT6 (Geezer wwiPilotNew3)
- 4 RNAS-RAF pilots: Geoffrey Siedle, Colin MacLaren, Arthur Roy Brown & Robert Little, using a British long leather coat (Geezer wwiPilotNew1). 
- wwiPilotNew18 - Geoffrey Siedle        - (Geezer wwiPilotNew1)
- wwiPilotNew20 - Colin MacLaren       - (Geezer wwiPilotNew1)
- wwiPilotNew23 - Arthur Roy Brown    - (Geezer wwiPilotNew1)
- wwiPilotNew24 - Robert Little             - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RNAS-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (RNAS-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Arthur Roy Brown    <------------------------------------ You must add this line
Position=0.00,-0.20,0.75                         <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RNAS-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________
  

The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A skin to FokkerDr1 by Third Wire Productions used by The Great Waldo Pepper film.
- Fokker Dr.1 flown by the character Ernst Kessler.
- I did Optional hangar screens for Ernst Kessler character. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN". 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Ernst Kessler
Name=Ernst Kessler
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Kessler-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Geezer United States pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some United States Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for different scarf colors and a United States uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8", "wwiPilotNew3" and "wwiPilotNew1" with the historical pilots names (ex: Frank Luke) or generic names such as US-PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this United States pilots skin Pack:
- 5 United States Aces:  
- Douglas Campbell            (Geezer wwiPilotNew5) 
- Edward Rikenbacker        (Geezer wwiPilotNew5) 
- Frank Luke                         (Geezer wwiPilotNew5) 
- Lawrence Callahan          (Geezer wwiPilotNew5) 
- Raoul Lufbery                   (Geezer wwiPilotNew5)
- 2 Knowed pilots whithout the Ace status:
- William Palmer              (Geezer wwiPilotNew5)
- William Wellman           (Geezer wwiPilotNew5) 
- 3 United States pilots: Edward Rikenbacker, Frank Luke & William Wellman, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to United States service & french service colors. 
- wwiPilotNew13 - Edward Rikenbacker  (Geezer wwiPilotNew1)
- wwiPilotNew14 - Frank Luke                   (Geezer wwiPilotNew1)
- wwiPilotNew28 - William Wellman        (Geezer wwiPilotNew1)
- 5 United States pilots with a generic face and several options for different scarf colors and a United States uniform at your choice.
- US-PILOT1  (Geezer wwiPilotNew5) 
- US-PILOT2  (Geezer wwiPilotNew3) 
- US-PILOT3  (Geezer wwiPilotNew4) 
- US-PILOT4  (Geezer wwiPilotNew8) 
- US-PILOT5  (Geezer wwiPilotNew7)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "UNITED STATES PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (UNITED STATES PILOTS INSTALLATION README) with installation instructions for the majority of United States, French and British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SPAD13_220) Aircraft folder and find the "SPAD13_220_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SPAD13_220
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Edward Rikenbacker  <------------------------------------ You must add this line
Position=0.00,-0.85,0.62                           <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for United States pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Geezer italian pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some italian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
 
You will find several options for italian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew3" with the historical pilots names (ex: Ernesto Cabruna) or generic names such as ITALIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this italian pilots skin Pack:
- 4 Italian Aces: 
- Ernesto Cabruna             (Geezer wwiPilotNew5) 
- Francesco Baracca        (Geezer wwiPilotNew5) 
- Giovanni Ancillotto         (Geezer wwiPilotNew5) 
- Giovanni Nicelli               (Geezer wwiPilotNew5) 

- 10 Italian pilots with a generic face and several options for italian uniforms and different scarf colors at your choice.
- ITALIANPILOT1  (Geezer wwiPilotNew7) 
- ITALIANPILOT2  (Geezer wwiPilotNew5) 
- ITALIANPILOT3  (Geezer wwiPilotNew5) 
- ITALIANPILOT4  (Geezer wwiPilotNew5) 
- ITALIANPILOT5  (Geezer wwiPilotNew4)
- ITALIANPILOT6  (Geezer wwiPilotNew4)
- ITALIANPILOT7  (Geezer wwiPilotNew7)
- ITALIANPILOT8  (Geezer wwiPilotNew8)
- ITALIANPILOT9  (Geezer wwiPilotNew4) 
- ITALIANPILOT10 (Geezer wwiPilotNew3)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "ITALIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (ITALIAN PILOTS INSTALLATION README) with installation instructions for the majority of ITALIAN French & British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SVA5) Aircraft folder and find the "SVA5_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with To use with SVA5
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=ITALIANPILOT2    <------------------------------------ You must add this line
Position=0.0,-0.60,0.55                       <------------------------------------ You must add this line 
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Italian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8). 
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________ 
  

Fly Boys Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from Fly Boys film.
- Fokker Dr.1 flown by the character Black Falcon.
- Fokker Dr.1 flown by the character Franz Wolfert.
- I did Optional hangar screens for Black Falcon and Franz Wolfert. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Black Falcon
Name=Black Falcon
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Franz Wolfert
Name=Franz Wolfert
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Wolfert-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 
,

 

Geezer Austro-Hugarian pilots for FE 2
This is a  pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2 
This pack presents some Austro-Hugarian Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
 
You will find several options for Austro-Hugarian uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to  my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8" and "wwiPilotNew1" with the historical pilots names (ex: Godwin Brumowski) or generic names such as AUSTRO-HUNGARIANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Austro-Hugarian pilots skin Pack:
- 3 Austro-Hugarian Aces: 
- Godwin Brumowski  (Geezer wwiPilotNew5) 
- Josef Kiss                  (Geezer wwiPilotNew5) 
- Franz Graser              (Geezer wwiPilotNew5) 

- 4 Austro-Hugarian pilots with a generic face and several options for Austro-Hugarian uniforms and different scarf colors at your choice.
- AUSTRO-HUNGARIANPILOT1 (Geezer wwiPilotNew5) 
- AUSTRO-HUNGARIANPILOT2 (Geezer wwiPilotNew8)
- AUSTRO-HUNGARIANPILOT3 (Geezer wwiPilotNew5)
- AUSTRO-HUNGARIANPILOT4 (Geezer wwiPilotNew6)
 
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "AUSTRO-HUNGARIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini 
Inside the pack, there is a (AUSTRO-HUNGARIAN PILOTS INSTALLATION README) with installation instructions for the majority of Austro-Hugarian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (AviatikD1) Aircraft folder and find the "AviatikD1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with AviatikD1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=AUSTRO-HUNGARIANPILOT4   <------------------------------------ You must add this line
Position=0.00,-1.12,0.55                                             <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Austro-Hugarian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8). 
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.  
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________________________