ALBATROS D I
REDUX
A workover of my previously uploaded Albatros DI models, I have completely reworked the skins and markings, there are 5 versions in this upload, A factory "Standard" skin in ply and Linen, a version with a lighter stained ply and more yellowis Linen for the wings and empenage. The next one is an all over 2 colour camouflage over blue scheme, then an rework of the previously released DI of Prince Friedrich Karl von Preußen, which is an all over sea green colour, there IS a discussion as to whether this aircraft had a camouflage scheme on the upper surfaces, however it is only speculation, as there are no actual photos I can find of this machine. The final DI is an all blue with camouflage upper surfaces, of Hans Bethge of Jasta 1.
Everything as always is packed up and ready to go, just unzip, and drop into your directory where you have all your other flying circusses !!! Just be aware it will over write any existing DI's you may have already installed, so dont forget to backup or rename the original files, to avoid any unfortunate mistakes !!!!
Included are all the sound files, decals, guns, pilots and of course the actual Albatros.
A shout out to Steven 1918 of course, without whom we wouldnt have the DI/DII Albatros in the first place, also to Geezer for the Pilot figure, and anyone else I may have inadvertently forgotten.
As always...............................ENJOY !!!
Albatros C III
Redux
This is a complete work over of the Albatros CIII. I was inspired by both Steven 1918's and Sinbads earlier releases of this aircraft. I used Stevens original release as a baseline, and also took inspiration from Sinbads relese as well. However, these are totally new skins. there are 3 from early war, with the early style of cross. an all over Linen one, a Blue aircraft, and a Stained ply wood version, the next set are from the mid war period, with the newer syle of Cross,. A more Blue Grey version, a Dark Stained Ply aircraft, a Green over Blue , and finally a Camouflage painted Albatros. The next couple are both in Lozenge, one Blue, and the other Green with the lozenge on the uper surfaces, and the lower surfaces of the wings. Finally I did an Austrian machine, which is speculative, as some references sat the KuK Luftruppen did use the type, whilst others do not seem to refer to it being in service with Austria at all, but it's there anyhow, and the last one on the list would be a Turkish machine in all over Light Grey.
I have not made any of the Aircraft as belonging to any particular Kasta, as information is not particularly good on this aeroplane, so all the markings are generic, but also different for each colour scheme.
This is an all in one package, so everything you need is included Sounds, Pilot, Guns, Decals, simply unzip the file and drop it straight into you FE directory. Just be aware that if you already have the C III installed, that this WILL overwrite it, so please back up or rename your existing Albatros C III !!!
A shout out to Stephen 1918 for doing the original, to Sinbad for his model, from which I copied and improved some details from, also to Geezer for the Pilot model.
As ever ....................ENJOY !!..........................
The Blue Max Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from The Blue Max film.
- Fokker Dr.1 flown by the character Bruno Stachel. (Several versions)
- Fokker Dr.1 flown by the character Willi von Klugermann. (Several versions)
The character Bruno Stachel used two Fokkers in the Blue Max film, one with the cowling painted full black and other with the
cowling tip in black.
You will find both of them in the skin pack.
- I did Optional hangar screens for Bruno Stachel and Willi von Klugermann characters. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN" folder of each character.
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Bruno Stachel
Name=Bruno Stachel
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Willi von Klugermann
Name=Willi von Klugermann
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Stachel HANGAR 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
Fly Boys Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from Fly Boys film.
- Fokker Dr.1 flown by the character Black Falcon.
- Fokker Dr.1 flown by the character Franz Wolfert.
- I did Optional hangar screens for Black Falcon and Franz Wolfert. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN" folder of each character.
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Black Falcon
Name=Black Falcon
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Franz Wolfert
Name=Franz Wolfert
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Wolfert-HANGARSCREEN 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
,
The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A skin to FokkerDr1 by Third Wire Productions used by The Great Waldo Pepper film.
- Fokker Dr.1 flown by the character Ernst Kessler.
- I did Optional hangar screens for Ernst Kessler character. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN".
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Ernst Kessler
Name=Ernst Kessler
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Kessler-HANGARSCREEN 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
Hello Fellow Fliers of First Eagles 2,
Version 11.0 of the FM/Realism Package for FE2 contains approximately 220 WWI aircraft types and sub-types, for your (virtual) flying enjoyment. For detailed installation instructions, please check over the main "Read Me First" file that is included, as well as several older (pdf) files and that cover aircraft performance info., tips, etc., across all previous versions of the FM update package.
A great many thanks go out to Peter01 and Ojcar, also TexMurphy, for making most of those flight model files to begin with. Also a great thanks goes out to Stephen1918, MontyCZ and Laton for providing lots of beautiful planes and skins that go with those great flight models, to NBell for the many hitbox improvements provided for the planes, also to VonOben, Mike Dora and Crawford for many helpful suggestions, and to the A-Team by SkunkWorks for allowing me to tweak a few of the FMs for their models too. And of course a very big thanks goes out to Geezer for several fantastic, high-quality models that were produced for FE2.
What I've done is tinkered with the data files further. Modifications in all cases, to a greater or lesser extent, include data under the following sections:
(a) MissionData
(b) FlightControl
(c) AIData
(d) Sound
(e) AircraftData
(f) Engine
(g) Crew
(h) Internal Guns
(i) Control Surfaces
(j) Landing Gears
(k) Fuselage, Nose, Tail, Vertical Tail, LeftStab, RightStab, Rudder, Left/Right/Inner/Middle/Outer/Tip Wing components
Enjoy and happy flying!,
Von S
NOTES: For several of Geezer's latest aircraft and my FMs for those aircraft (Nieuports, Pfalzes, etc.), which are not included in this package, please see the relevant post located towards the bottom of page 25 of the "New Aircraft" thread for FE2, on CombatAce. Also see relevant posts on pages 26, 27, and 28 of that same thread for Geezer's "early beta" collection that contains the Breguet XIV, Junkers J.I, and other updates, including performance info. for some of those aircraft types.
DISCLAIMER: All Von S mods., for FE2, SF2, also WOFFue/pe/bh&h2, as well as for RoF (United Ed.), are subject to the CombatAce "freeware" terms of agreement. Mods. may be shared with others, included on other media devices, also modded further, providing that original documentation and/or credit is included, and providing that the mods. remain free to use. Von S mods. shall not be sold, resold, etc., and Von S takes no responsibility for injuries or fixations that may result from flying heavily tweaked FMs or from attempts to enjoy real flying without aid or instruction from a qualified flight instructor.
Geezer German pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2
This pack presents some German Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for German uniforms and different scarf colors at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew2", "wwiPilotNew3", "wwiPilotNew5", "wwiPilotNew6", "wwiPilotNew7" and "wwiPilotNew8", with the historical pilots names (ex: Kurt Wolff) or generic names such as GERMANPILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this German pilots skin Pack:
- 13 Germans Aces:
- Ernst Udet (Geezer wwiPilotNew5)
- Josef Jacobs (Geezer wwiPilotNew5)
- Josef Mai (Geezer wwiPilotNew5)
- Julius Buckler (Geezer wwiPilotNew5)
- Kurt Wolff (Geezer wwiPilotNew5)
- Kurt Wusthoff (Geezer wwiPilotNew5)
- Max Immelman (Geezer wwiPilotNew5)
- Oswald Boelcke (Geezer wwiPilotNew5)
- Otto Parchau (Geezer wwiPilotNew5)
- Paul Baumer (Geezer wwiPilotNew5)
- von Richthofen (Geezer wwiPilotNew5)
- von Schleich (Geezer wwiPilotNew5)
- Werner Voss (Geezer wwiPilotNew5)
- 4 fictional characters from films:
- Black Falcon (from Fly Boys film) (Geezer wwiPilotNew5)
- Bruno Stachel (from Blue Max film) (Geezer wwiPilotNew5)
- Willi von Klugermann (from Blue Max film) (Geezer wwiPilotNew5)
- Ernst Kessler (from The Great Waldo Pepper film) (Geezer wwiPilotNew5)
- 10 German Aces using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Josef Mai 2 (wwiPilotNew1)
- Julius Buckler 2 (wwiPilotNew1)
- Kurt Wolff 2 (wwiPilotNew1)
- Kurt Wusthoff 2 (wwiPilotNew1)
- Max Immelman 2 (wwiPilotNew1)
- Oswald Boelcke 2 (wwiPilotNew1)
- Paul Baumer 2 (wwiPilotNew1)
- von Richthofen 2 (wwiPilotNew1)
- von Schleich 2 (wwiPilotNew1)
- von Schleich 3 (wwiPilotNew1)
- 1 fictive character using a British long leather coat (Geezer wwiPilotNew1) that I adapted to German service colors.
- Bruno Stachel 2 (wwiPilotNew1)
- 6 Germans pilots with generic face and several options for different scarf colors & a German uniform at your choice.
- GERMANPILOT1 (Geezer wwiPilotNew6)
- GERMANPILOT2 (Geezer wwiPilotNew6)
- GERMANPILOT3 (Geezer wwiPilotNew7)
- GERMANPILOT4 (Geezer wwiPilotNew8)
- GERMANPILOT5 (Geezer wwiPilotNew2)
- GERMANPILOT6 (Geezer wwiPilotNew3)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "GERMAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (GERMAN PILOTS INSTALLATION README) with installation instructions for the majority of German aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (FokkerDr1) Aircraft folder and find the "FokkerDr1_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with FokkerDr1
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=von Richthofen <------------------------------------ You must add this line
Position=0.00,-0.75,0.65 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for German pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew2), (wwiPilotNew3), (wwiPilotNew5), (wwiPilotNew6), (wwiPilotNew7) & (wwiPilotNew8).
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
Geezer RNAS-RAF pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some RNAS-RAF Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find several options for different scarf colors and a RNAS-RAF uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew1", "wwiPilotNew3", "wwiPilotNew4", "wwiPilotNew5", "wwiPilotNew7" and wwiPilotNew8 with the historical pilots names (ex: Robert Little) or generic names such as RNAS-RAF PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this RNAS-RAF pilots skin Pack:
- 6 RNAS-RAF Aces:
- Arthur Roy Brown (Geezer wwiPilotNew5)
- Bruno De Roeper (Geezer wwiPilotNew5)
- Geoffrey Siedle (Geezer wwiPilotNew5)
- Lawrence Coombes (Geezer wwiPilotNew5)
- Raymond Collishaw (Geezer wwiPilotNew5)
- Robert Little (Geezer wwiPilotNew5)
- 1 Knowed pilot without the Ace status:
- Colin MacLaren (Geezer wwiPilotNew5)
- 6 RNAS-RAF pilots with a generic face and several options for different scarf colors and a RNAS-RAF uniform at your choice.
- RNAS-RAF PILOT1 (Geezer wwiPilotNew1)
- RNAS-RAF PILOT2 (Geezer wwiPilotNew4)
- RNAS-RAF PILOT3 (Geezer wwiPilotNew7)
- RNAS-RAF PILOT4 (Geezer wwiPilotNew8)
- RNAS-RAF PILOT5 (Geezer wwiPilotNew5)
- RNAS-RAF PILOT6 (Geezer wwiPilotNew3)
- 4 RNAS-RAF pilots: Geoffrey Siedle, Colin MacLaren, Arthur Roy Brown & Robert Little, using a British long leather coat (Geezer wwiPilotNew1).
- wwiPilotNew18 - Geoffrey Siedle - (Geezer wwiPilotNew1)
- wwiPilotNew20 - Colin MacLaren - (Geezer wwiPilotNew1)
- wwiPilotNew23 - Arthur Roy Brown - (Geezer wwiPilotNew1)
- wwiPilotNew24 - Robert Little - (Geezer wwiPilotNew1)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RNAS-RAF PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (RNAS-RAF PILOTS INSTALLATION README) with installation instructions for the majority of British & French aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Arthur Roy Brown <------------------------------------ You must add this line
Position=0.00,-0.20,0.75 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for RNAS-RAF pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
Geezer United States pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents some United States Aces and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
_________________________________________________________________________________________________
You will find several options for different scarf colors and a United States uniform at your choice. I choosed the Geezer's "wwiPilotNew5" and "wwiPilotNew1" as base to my faces paint job, due that this is the only pilots where is possible painting different faces without the moustache. So I renamed the "wwiPilotNew5", "wwiPilotNew7", "wwiPilotNew4", "wwiPilotNew8", "wwiPilotNew3" and "wwiPilotNew1" with the historical pilots names (ex: Frank Luke) or generic names such as US-PILOT1 for instance. Each Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________
** What you will find in this United States pilots skin Pack:
- 5 United States Aces:
- Douglas Campbell (Geezer wwiPilotNew5)
- Edward Rikenbacker (Geezer wwiPilotNew5)
- Frank Luke (Geezer wwiPilotNew5)
- Lawrence Callahan (Geezer wwiPilotNew5)
- Raoul Lufbery (Geezer wwiPilotNew5)
- 2 Knowed pilots whithout the Ace status:
- William Palmer (Geezer wwiPilotNew5)
- William Wellman (Geezer wwiPilotNew5)
- 3 United States pilots: Edward Rikenbacker, Frank Luke & William Wellman, using a British long leather coat (Geezer wwiPilotNew1) that I adapted to United States service & french service colors.
- wwiPilotNew13 - Edward Rikenbacker (Geezer wwiPilotNew1)
- wwiPilotNew14 - Frank Luke (Geezer wwiPilotNew1)
- wwiPilotNew28 - William Wellman (Geezer wwiPilotNew1)
- 5 United States pilots with a generic face and several options for different scarf colors and a United States uniform at your choice.
- US-PILOT1 (Geezer wwiPilotNew5)
- US-PILOT2 (Geezer wwiPilotNew3)
- US-PILOT3 (Geezer wwiPilotNew4)
- US-PILOT4 (Geezer wwiPilotNew8)
- US-PILOT5 (Geezer wwiPilotNew7)
__________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "UNITED STATES PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (UNITED STATES PILOTS INSTALLATION README) with installation instructions for the majority of United States, French and British aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (SPAD13_220) Aircraft folder and find the "SPAD13_220_DATA.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with SPAD13_220
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Edward Rikenbacker <------------------------------------ You must add this line
Position=0.00,-0.85,0.62 <------------------------------------ You must add this line
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for United States pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew1), (wwiPilotNew3), (wwiPilotNew4), (wwiPilotNew5), (wwiPilotNew7) & (wwiPilotNew8).
__________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
Geezer Russian pilots for FE 2
This is a pack of new textures focused on pilots that Geezer released years ago. The content can be used with First Eagles 2.
This pack presents the Ukrainian/Russian Ace Alexander Kozakov and there is also a group of generic pilots that you will be able to use in airplanes that you wish.
__________________________________________________________________________________________________________________________
You will find different options for scarf colors at your choice. The Ace or generic pilot will be in aproppiate folder to avoid any incompatibility with the Geezer pilots if you had one of them intalled in your "pilots" folder.
__________________________________________________________________________________________________________________________
** What you will find in this Russian pilots skin Pack:
- 1 Ukrainian/Russian Ace:
- Alexander Kozakov (Geezer wwiPilotNew5)
- 3 Russian pilots with a generic face and different scarf colors at your choice.
- RUSSIANPILOT1 (Geezer wwiPilotNew6)
- RUSSIANPILOT2 (Geezer wwiPilotNew7)
- RUSSIANPILOT3 (Geezer wwiPilotNew8)
__________________________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
- Drop or copy the inside contend of the folder "RUSSIAN PILOTS" to your "Pilots" folder.
*ATTENTION*
In order to work properly in your aircraft data.ini
Inside the pack, there is a (RUSSIAN PILOTS INSTALLATION README) with installation instructions for the majority of Russian aircrafts (aircraft data.ini) around. You must to edit manually the "PILOTMODELNAME" and the "POSITION".
As an example:
Open your (CamelF1_130) Aircraft folder and find the "CamelF1_130_data.ini" file, then find the name "Crew". You must to exchange two (2) lines manually.
To use with CamelF1_130
// Crew ---------------------------------------------------------
[Pilot]
PilotModelName=Alexander Kozakov <------------------------------------ You must add this line
Position=0.00,-0.20,0.75 <------------------------------------ You must add this line
__________________________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Russian pilots.
- Geezer for the excellent pilot 3d models (wwiPilotNew5), (wwiPilotNew6) & (wwiPilotNew8).
___________________________________________________________________________________________________________________________
- Special thanks to Geezer for their fantastic work.
- Special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________________________
