Is this an .ini issue

[+bigal1 0]

Hi all , i have a model of the XB70 which has been sat on my HD for a while so i decided to give it some attention . One problem i have found is that when i powerup on the runway the aircraft will veer off to the left , not by a huge ammount but enough to have to correct it with full rudder . Everything seems to check out fine with the model in max so i'm guessing it could be an ini issue and wondered if anyone here had any ideas on what could be causing this and any fix's i could try .

Thanks

 

 

 

 

 

 

[serverandenforcer 33]

Quick question. Do you have to constantly apply right rudder when it's powered up, or is it just a brief correction that has to be made when you throttle up on the runway?

[+bigal1 0]

Quick question. Do you have to constantly apply right rudder when it's powered up, or is it just a brief correction that has to be made when you throttle up on the runway?

 

Hi there , constant rudder application has to used to correct the issue .

[Fubar512 1,350]

Hi there , constant rudder application has to used to correct the issue .

 

Off center thrust, or unequal landing gear values would be my first two guesses.

[+bigal1 0]

Off center thrust, or unequal landing gear values would be my first two guesses.

 

Cheers Fubar first thing u said worked , was one of the engines which had a minus missing from the thrust entry so was bias to one side .

Thanks again

[Stick 773]

WOW bigal1 you are one to watch!

[Atreides 144]

So Bigal, will you be sharing this bird with us ? Looks fantastic.

Edited December 4, 2008 by Atreides

[+bigal1 0]

So Bigal, will you be sharing this bird with us ? Looks fantastic.

 

Yup when it is at beta stage i'll be sharing this and a few other things i have been working on but at the moment i'm still held up by uv mapping . Once i figure out mapping i can move on and get things out .

[kct 5]

Someone get Lexx_Luthor here. NOW.

[+Veltro2k 6,319]

Yup when it is at beta stage i'll be sharing this and a few other things i have been working on but at the moment i'm still held up by uv mapping . Once i figure out mapping i can move on and get things out .

 

 

WOW !!!!!!!!! Nice Going Bigal1

[ronan 0]

amazing

how old is it?:rapage: and what's the status of your B-1B??

Edited December 4, 2008 by ronan

[DWCAce 19]

Very nice work! Which references are you using? I'd love to offer what limited time (and skill) i've got!

[Canadair 16]

I knew I should have taken that UV-mapping course..

ANyone toe help bigal pleasE?

[Wrench 9,655]

There's a hangar screen just waiting for a home, if you want it!

 

Wrench

kevin stein

[+bigal1 0]

There's a hangar screen just waiting for a home, if you want it!

 

Wrench

kevin stein

 

Sounds good mate thanks