kct Posted January 3, 2009 Posted January 3, 2009 (edited) At least, AmericaNW (4 seasons) and DBS (current version) are compatible with the latest patches (not sure about the rest, because I never flew on them). Not sure about the rest, although most of the terrains released in the last 6 months should work, since they are being constantly updated. I want an updated EAWEuro... Edited January 3, 2009 by kct Quote
+EricJ Posted January 3, 2009 Posted January 3, 2009 I'm running DBS, ANW 4-Seasons, SoCal, Greece 1.1, Range, Red Range, and the Black Sea map and really no issues are showing up. I do however have issues with DRV, as I'd really like to fly that map with modern SAMs and stuff, would make it interesting. Quote
Jarhead1 Posted January 3, 2009 Posted January 3, 2009 I just use the cat with the latest patch and it pretty much takes care of any problems I have with the terrains. As long as the tiles are there, then its good to go. Quote
+Dave Posted January 3, 2009 Posted January 3, 2009 I am running just about every single terrain in my late patch installs with no problems. Quote
+Veltro2k Posted January 3, 2009 Author Posted January 3, 2009 What problems are you having Ed? CTD's after 100% loading Quote
+Veltro2k Posted January 3, 2009 Author Posted January 3, 2009 (edited) Midway , BOB not working after patch B can anyone explain how they got theirs working please ? Edited January 3, 2009 by Veltro2k Quote
+Brain32 Posted January 3, 2009 Posted January 3, 2009 Well m8 I just installed mine lol really... BTW you do know that some planes can't use some terrains due to base requirement? I mean I see you are mentioning WW2 terrains mostly, they all have small airfields and planes that need larger runways will CTD on a terrain without them... Quote
+Wrench Posted January 3, 2009 Posted January 3, 2009 Hmmm...none of my WW2 installs are patched, so I've got no problems with them. (due to the FM issues). I do have a fully patched WoI WW2 that I 'experiment' with... In patched WoE (my all is everything modern-ish install), everything seems to be working..34 terrians, not including the ww2 one, however. Ed, when it crashes, does the Micro$oft error reporting box pop up? If so, what error message does it say? (the 'click here to see what this report says' thingy). Usually will tell which dll is releated to the crash. Wrench kevin stein Quote
+Veltro2k Posted January 3, 2009 Author Posted January 3, 2009 Hmmm...none of my WW2 installs are patched, so I've got no problems with them. (due to the FM issues). I do have a fully patched WoI WW2 that I 'experiment' with... In patched WoE (my all is everything modern-ish install), everything seems to be working..34 terrians, not including the ww2 one, however. Ed, when it crashes, does the Micro$oft error reporting box pop up? If so, what error message does it say? (the 'click here to see what this report says' thingy). Usually will tell which dll is releated to the crash. Wrench kevin stein get this AppName: woe.exe AppVer: 8.10.0.16 ModName: singlemission.dll ModVer: 0.0.0.0 Offset: 00001d48 Quote
+Wrench Posted January 3, 2009 Posted January 3, 2009 AppName: woe.exe AppVer: 8.10.0.16 ModName: singlemission.dllModVer: 0.0.0.0 Offset: 00001d48 THAT's what I wanted!!! Usually, when I've gotten that, it's for a mission type not supported (anti-ship on The Range, say) or as mentioned above, the airbase size issue. That's why I've tried to add a least 1 medium airfield for each side in my WW2 rebuilds/updates. Ed, what plane, what mission type, and just the BoB and Midway terrains, or others??? BoB COULD stand to have some larger airfeleds -- at least a runway1 for the bombers, most definately on the RAF side (probably for the LW too...) Midway we're kinda stuck with what we got, due to the size of the island. Wrench kevin stein Quote
+Veltro2k Posted January 3, 2009 Author Posted January 3, 2009 THAT's what I wanted!!! Usually, when I've gotten that, it's for a mission type not supported (anti-ship on The Range, say) or as mentioned above, the airbase size issue. That's why I've tried to add a least 1 medium airfield for each side in my WW2 rebuilds/updates. Ed, what plane, what mission type, and just the BoB and Midway terrains, or others??? BoB COULD stand to have some larger airfeleds -- at least a runway1 for the bombers, most definately on the RAF side (probably for the LW too...) Midway we're kinda stuck with what we got, due to the size of the island. Wrench kevin stein Hudson BOB antiship Quote
+Syrinx Posted January 3, 2009 Posted January 3, 2009 I have BOB & WW2 terrain and have flown the Hudson antiship missions. The target is usually Lorient and I think it's actually off the map. It loads ok here but if I try to ALT-N to target IP I get a CTD. However, I can fly there normally no problem...til I hit "the wall" ! Quote
+Wrench Posted January 3, 2009 Posted January 3, 2009 That's odd...just got the same thing in my non-patched version!!!! Methinks that it's a terrain issue, as strike and recon are working fine. Maybe there's not enough Axis shipping routes? I must admit, I haven't spent any time really looking at the targets and movements inis in BoB -- to busy intercepting bombers!! EDIT: hmm...BoB (original - not the campaing versions) only has 2 shipping routes. the EAWEuro WW2 has several. I'll transfer the Hudson over, and see what gives in the Pacific, just for s**ts and grins... Wrench kevin stein Quote
+whiteknight06604 Posted January 3, 2009 Posted January 3, 2009 I can't seem to get the Hudson to work in my BOB install either.I tried unpatched and patched to the "2006" and no go just a CTD after the loading screen gets to 100%.It does work in my WOE install patched up to the oct08 version. Quote
+whiteknight06604 Posted January 4, 2009 Posted January 4, 2009 on my part the hudson will fly on my "newest patch" installs but I still get CTD on WOE 2006 patch.It happens in both the Stock german and the BOB terrain. Quote
+Veltro2k Posted January 14, 2009 Author Posted January 14, 2009 Bumping this Up...there has to be a fix to this Quote
jtin Posted January 15, 2009 Posted January 15, 2009 It's only the Hudson BOB antiship? Probably what Wrench said: Methinks that it's a terrain issue, as strike and recon are working fine. Maybe there's not enough Axis shipping routes? I must admit, I haven't spent any time really looking at the targets and movements inis in BoB -- to busy intercepting bombers!! EDIT: hmm...BoB (original - not the campaing versions) only has 2 shipping routes. the EAWEuro WW2 has several. I'll transfer the Hudson over, and see what gives in the Pacific, just for s**ts and grins... Wrench kevin stein Quote
+Wrench Posted January 15, 2009 Posted January 15, 2009 Ok, been testing these over the last couple of hours.... copy/paste the items below at the bottom of the BattleofBritian_Movements.ini: ///--new routes, added by The Wrench, 1/14/09----/// [Route009] RouteType=SHIPPING StartArea=Port of Le Harve EndArea=Port of Cherbourg RoutePosition[001]=706303,419973 RoutePosition[002]=532918,462269 [Route010] RouteType=SHIPPING StartArea=Port of Dieppe EndArea=Port of Le Harve RoutePosition[001]=837354,490160 RoutePosition[002]=721245,454913 RoutePosition[003]=714708,419053 [Route011] RouteType=SHIPPING StartArea=Port of St Malo EndArea=Gurnsey Fliegerhorst RoutePosition[001]=465680,332315 RoutePosition[002]=410583,402809 [Route012] RouteType=SHIPPING StartArea=Port of Calais EndArea=Port of Le Harve RoutePosition[001]=925447,607547 RoutePosition[002]=875019,575672 RoutePosition[003]=743035,489240 RoutePosition[004]=710038,428861 I claim aboslutely NO historical acccuraty, just took a 'logical' bent, and went Port-to-Port, except for Gurnsey Been testing with the Beau Mk.1, Mossie FB6 (and FB6 633 SOE sepecial ) and Hudson. The only oddity I get it sometimes a CTD with the Hudson with a "DxD9.dll" fault -- which is odd, as I'm up to date. Wrench kevin stein Quote
+Veltro2k Posted January 15, 2009 Author Posted January 15, 2009 It's only the Hudson BOB antiship? Probably what Wrench said: no . any type of aircraft any mission all WWII type terrains Quote
+Veltro2k Posted January 15, 2009 Author Posted January 15, 2009 OK FOLKS HERES A GOOD ONE I changed the base size from Medium to small and it worked Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.