Jump to content

Recommended Posts

F-16XL for SF2 – F-16E Blk 62 Fighting Falcon


F-16XL for SF2 – F-16E Blk 62 Fighting Falcon 2.1


In March 1981, the USAF announced the Enhanced Tactical Fighter (ETF) program to procure a replacement for the F-111. The program was later renamed the Dual-Role Fighter (DRF) competition. The concept envisioned an aircraft capable of launching deep air interdiction missions without requiring additional support by fighter escort or jamming. General Dynamics submitted the F-16XL, while McDonnell Douglas submitted the F-15E.

As we all know the F-15E was chosen... BUT what if the F-16XL had been chosen instead?

And so I give you the F-16E/F Block 62 Fighting Falcon.

The designation F-16E/F Block 60/62 would have been used had the XL been selected (The F-16E/F Desert Falcon as we know it today wasn't even on the drawing board in the late 80's).


Included in this mod are:

- F-16E (XL) Blk 62 Fighting Falcon

- F-16EM (XL) Blk 62 Fighting Falcon (CUPID mods)

- F-16EV (XL) Blk 62 Fighting Falcon (AN/APG-83 AESA radar upgrade)

- 8 different USAF squadrons.


To Install simply un pack and drop into your mods folder.


Notes:

- The weapon stations are quite complicated due to the set up on the real aircraft itself and the limitations in SF2 with the maximum amount of hard-points etc. As such it is best to use the default load out from the loadout.ini. That being said if you do want to change it at the loadout screen you need to follow these rules: If the default loadout uses rail launched weapons (Aim-9/120, AGM-65/88) under the inner wings, only change it for another rail launched weapon and vice-versa. This is because the weapon rails are loaded as an EP class weapon that doesn't show up at the loadout screen.

- The default 'Attack' loadout is designed for the mass anti-armour mission as that is the kind of CAS mission SF2 generates. However in the loadout.ini file under each 'attack' loadout entry is a CAS loadout option with LGB etc.

- There are a ton of different loadout options in the loadout.ini file so check them out with the single mission editor.

- Loadouts are based on the F-16C Blk 40/42 but with an F-15E Strike Eagle flavor e.g. AGM-130

- Shadows are deactivated as 'tractor beams' are an issue as it is an older .lod

2.1 Changes:

- Added missing 20mm M61A1 Vulcan (PGU-28) to 'Guns' folder. PGU-28 loads generally don't have tracers.

2.0 Changes:

- F-16EV (XL) Blk 62 Fighting Falcon added.
- Loadout.ini and weapon station fixes.
- Cockpits changed to Block 42 type with WAR hud as LANTIRN would have been fully integrated on the jet.
- Ferris test skin added for F-16E (XL) Blk 62 Fighting Falcon.
- Canopy RCS reducing tinting added as per F-16C/CM Block 40/42.
- Semi- conformal AIM-120 station position and angles corrected.
- Internal ECM changed to AN/ALQ-165 Airborne Self-Protection Jammer (ASPJ) as was planned for production aircraft.

 

Released under the CA fair use agreement.


Credits:

The Viper Team
The Mudhen Maintenance Team 2016
Viper63a
USAFMTL
Dave
ravenclaw_007
Original Model by wpnssgt via Swede
Dels
moonjumper
Fubar512
creepin death
Mirage Factory


Enjoy,

Dan.


 

  • Like 5

Share this post


Link to post
Share on other sites

Updated.

2.0 Changes:

- F-16EV (XL) Blk 62 Fighting Falcon added.
- Loadout.ini and weapon station fixes.
- Cockpits changed to Block 42 type with WAR hud as LANTIRN would have been fully integrated on the jet.
- Ferris test skin added for F-16E (XL) Blk 62 Fighting Falcon.
- Canopy RCS reducing tinting added as per F-16C/CM Block 40/42.
- Semi- conformal AIM-120 station position and angles corrected.
- Internal ECM changed to AN/ALQ-165 Airborne Self-Protection Jammer (ASPJ) as was planned for production aircraft.

img00001.thumb.JPG.518719efb9e993223c8c1233a994d3de.JPG

img00003.thumb.JPG.666090950ed15ccb66b710726a177695.JPG

Edited by dtmdragon
  • Like 3

Share this post


Link to post
Share on other sites

I can't wait to check this out actually as it's been years since I messed with it. It's only too bad nobody will take it up and do a more current model though. I mean the current one is alright, but yeah, it's a bit dated that's for sure. Not to say I'm asking you to do one, but you can only do so much really but whatever, thanks for this!

  • Like 1

Share this post


Link to post
Share on other sites

Missing 2.0 file fixed, awaiting approval...

  • Thanks 1

Share this post


Link to post
Share on other sites

2.1 Changes:

- Added missing 20mm M61A1 Vulcan (PGU-28) to 'Guns' folder. PGU-28 loads generally don't have tracers.

Edited by dtmdragon
  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Coupi


      View File F-16A FSD skin for the TMF F-16A Block 1 -
      FSD* skin for the SF2 F-16A Block 1 package by Wrench ;)
      https://combatace.com/files/file/18256-sf2-f-16a-block-1-tmf-pack/
      *From 1977 to 1978 General Dynamics delivered 6 pre-production F-16As to USAF for Full Scale Development:
      75-745
      75-746
      75-747
      75-748
      75-749
      75-750
      To install this skin for the F-16A Block 1 mod, copy and paste the "Object" folder into your "SF2" directory.
      Many thanks to Kevin for the SF2 conversion of this vintage Mirage Factory Team mod !
      Coupi
       
      Submitter Coupi Submitted 09/22/2024 Category F-16  
    • By Coupi
      FSD* skin for the SF2 F-16A Block 1 package by Wrench ;)
      https://combatace.com/files/file/18256-sf2-f-16a-block-1-tmf-pack/
      *From 1977 to 1978 General Dynamics delivered 6 pre-production F-16As to USAF for Full Scale Development:
      75-745
      75-746
      75-747
      75-748
      75-749
      75-750
      To install this skin for the F-16A Block 1 mod, copy and paste the "Object" folder into your "SF2" directory.
      Many thanks to Kevin for the SF2 conversion of this vintage Mirage Factory Team mod !
      Coupi
       
    • By Coupi


      View File AIM-97A Seekbat for SF2
      What if Mod : AIM-97A Seekbat for SF2
      v1.0.0

      1) History
          Studied by General Dynamics, the Seekbat tested under the designation XAIM-97 was a USAF 
          attempt to field a long range AAM for intercepting the Foxbat.
          This 590 kg air-to- air weapon was a SAHM. Its speed was Mach 3+ and its range was 90 km.
          The Seekbat was another Standard missile derivate...

      2) Installation
          This AAM uses the AGM-78 LOD file from Strike Fighters 2.
          I have repainted the tile and created the needed files with the TW Weapon Editor.

          Put the "Objects" folder to your SF2 Directory

          In order to fire it you could fly the Thirdwire F-15A and you need edit the data.ini of the plane 
          and add "SAHM" entry to this file :
              // Weapon Stations --------------------------
              [LeftWingStation]
              SystemType=WEAPON_STATION
              StationID=1
              StationGroupID=2
              ...
              ...
              ...
              AllowedWeaponClass=BOMB,LGB,EOGB,MER,FT,SAHM
              AttachmentType=NATO,USAF
              ...
              ...
              ...
              FuelTankName=Tank610_F15
              FuelTankNodeName=droptank_wing_L
              [RightWingStation]
              SystemType=WEAPON_STATION
              StationID=2
              StationGroupID=2
              ...
              ...
              ...
              AllowedWeaponClass=BOMB,LGB,EOGB,MER,FT,SAHM
              AttachmentType=NATO,USAF
              ...
              ...
              ...
              FuelTankName=Tank610_F15
              FuelTankNodeName=droptank_wing_R

      3) What if story 
          1980 over Europe : the AIM-97A Seekbat is in operational service !

          
      Its your turn now !

      Coupi ;)
      Submitter Coupi Submitted 11/01/2022 Category Single Ordnance Files  
    • By Coupi
      What if Mod : AIM-97A Seekbat for SF2
      v1.0.0

      1) History
          Studied by General Dynamics, the Seekbat tested under the designation XAIM-97 was a USAF 
          attempt to field a long range AAM for intercepting the Foxbat.
          This 590 kg air-to- air weapon was a SAHM. Its speed was Mach 3+ and its range was 90 km.
          The Seekbat was another Standard missile derivate...

      2) Installation
          This AAM uses the AGM-78 LOD file from Strike Fighters 2.
          I have repainted the tile and created the needed files with the TW Weapon Editor.

          Put the "Objects" folder to your SF2 Directory

          In order to fire it you could fly the Thirdwire F-15A and you need edit the data.ini of the plane 
          and add "SAHM" entry to this file :
              // Weapon Stations --------------------------
              [LeftWingStation]
              SystemType=WEAPON_STATION
              StationID=1
              StationGroupID=2
              ...
              ...
              ...
              AllowedWeaponClass=BOMB,LGB,EOGB,MER,FT,SAHM
              AttachmentType=NATO,USAF
              ...
              ...
              ...
              FuelTankName=Tank610_F15
              FuelTankNodeName=droptank_wing_L
              [RightWingStation]
              SystemType=WEAPON_STATION
              StationID=2
              StationGroupID=2
              ...
              ...
              ...
              AllowedWeaponClass=BOMB,LGB,EOGB,MER,FT,SAHM
              AttachmentType=NATO,USAF
              ...
              ...
              ...
              FuelTankName=Tank610_F15
              FuelTankNodeName=droptank_wing_R

      3) What if story 
          1980 over Europe : the AIM-97A Seekbat is in operational service !

          
      Its your turn now !

      Coupi ;)
    • By Menrva


      View File NovaLogic Skin Pack
      NovaLogic Skin Pack
      September 13th, 2022 (1st Release)
      by Menrva

      >For Strike Fighters 2 games
      This package includes high quality skins representing the player's aircraft from three lite flight simulators released by NovaLogic, namely F-22 Raptor in 1997, F-16 Multirole Fighter and MiG-29 Fulcrum both released in 1998. Below, a summary of the details of each skins:
      -NL_357CW, for the F-22A Raptor aircraft I released. This skin represents the fictive Raptor Squadron of the 58th TFS, 357th CW (Composite Wing), which took part in military operations in Angola, Jordan, Russia, Colombia and Iran. Serial numbers are realistic, the first being 001 as portrayed on the player's aircraft from NovaLogic's game.
      -NL_16AESOG, for the F-16C Block 42 aircraft released by The Viper Team. It depicts the fictive Viper Squadron of the 32nd TFS, 16th AESOG (Air Expeditionary Special Operations Group), which took part in military operations in Serbia, Liberia, Congo, Burma and Somalia. I made the skin for the Block 42, since it's reminescent of the one that NovaLogic modelled. Serial numbers are semi-realistic, the first being 112 as portrayed on the player's aircraft from NovaLogic's game.
      -NL_11EW, for the MiG-29S Fulcrum-C aircraft released by The Mirage Factory. It depicts the fictive 300 Squadron of the 7th Red Banner Guards Regiment, 11th Expeditionary Wing, which took part in military operations in the Kurile Islands, Uganda, Somalia, Burma and Tajikistan. Serial numbers are generic, the aircraft does not have any in NovaLogic's game.

      >Credits (in no particular order):
      -The Viper Team, for its detailed F-16 3d models and relative templates.
      -The Mirage Factory, for its good old MiG-29 3d model.
      -Sundowner, for the MiG-29 templates he made available.
      -yakarov79, for his reworked F-22 3d model and relative templates.

      >Disclaimer:
      This is a freeware; yet it can be redistributed ONLY in other CombatACE mods/mod packages.
      This mod may NOT in any way, shape or form be used in any payware additions.
      Submitter Menrva Submitted 09/12/2022 Category What If Skins  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..