Jump to content
Sign in to follow this  
Skynax

Nuclear Mod Please Help

Recommended Posts

Hi guys I have a problem and have already tried a few things, if I install a nuclear mod I get everything right with the explosion and such but I have no detonation sound I've tried a lot I'm sorry for the bad English but I'm from Germany I hope so can someone help.

Share this post


Link to post
Share on other sites

25 minutes ago, Nyghtfall said:

Please reduce the size of your text to a usual level. Thanks. :wink:

You know...It is a NUCLEAR matter.

  • Haha 6

Share this post


Link to post
Share on other sites

I remember looking for a nuclear mod for a long time, which I liked. Try to download B-1B aircraft and other nuclear aircrafts as well. I think Scorpion too. There in the planes themselves there is a nuclear mod. Too bad I don't remember which mod I kept for myself but it was one of aircraft mod

Edited by bazillius

Share this post


Link to post
Share on other sites

I have two nuclear explosion sounds in my Sounds directory, maybe if you put them in your own mod folder it'll work (I can't guarantee as I don't use nukes in the game). If not then the sound may be the default bomb explosion and therefore you can't hear it (but it does work for the explosion sound) as you would a nuke.

Sounds.7z

Edited by EricJ

Share this post


Link to post
Share on other sites

Thanks after i have no Explosion Sound why, I have the explosion but no sound from the explosion why

Share this post


Link to post
Share on other sites

You can add it to the Soundlist.ini and see if that will fix it. But you'll have to extract a default one from the (If I remember correctly) Flight.cat and modify it. It's pretty easy to follow how to do it and may produce a sound. I don't know if it does for other people who use nukes but as far as I know that may not work either. You'll have to see.

Share this post


Link to post
Share on other sites

can someone upload a finished one with a nuclear weapon where the sound also works i don't know what i'm doing wrong have already tried everything please

Share this post


Link to post
Share on other sites

Well, if the soundlist entry didn't work I don't think there is a programmed sound for it, just have to enjoy the graphics.

Share this post


Link to post
Share on other sites

Perhaps the point is, if you’re nuked, you’re nuked?

 

Recall from my RAF training* that one could expect the following sequence from a nuclear detonation: flash; heat/radiation; blast.

Given that the Bang would arrive with the blast, by then one was already well and truly fried and thus rather disinterested in any resulting noise.**

Cheers

Stay Well

Mike

*our RAF Regiment training sgt at Cranwell (1976/77) had an endearing habit of referring to the phenomenon as “The Nuclear Holy-Cost”. 

** unofficial RAF SOP in the event of detecting a nuclear detonation: “place one’s head between one’s knees, and kiss one’s a*se goodbye”.

 

 

Edited by Mike Dora
  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By JamesWilson
      Hi everyone,
      I recently got into weapon modding and wanted to edit some missiles.
      I went for the Weapons Folder with the Weapons Editor, and some weapons were missing, even tho i can see them and equip them in-game.
      I wanted to edit the AA-2D Atoll for my Su-22M3, but there's no AA-2 folder inside Weapons folder, nor inside plane folder, even tho the missile is equippable and i can see it/use it in-game.
      Since there's no Atoll folder, i have no idea how is it possible for me to have it in-game, and even less i know on how am i supposed to edit it through Weapons Editor, since i can't select the folder.
      I thought it may be a sort of "built-in-game" missile and for this reason not showing in weapons folder (idk i just made an hypothesis).
      So i tried using the CAT Extractor, but seems like not working... no matter which CAT file i select, it says "error opening this .CAT file, no files can be extracted", how's that? How do i fix it? Am i doing something wrong?
      Thank you in advance for helping me fixing all these issues or helping me find what i'm doing wrong
    • By JamesWilson
      Hi,
      after seeing the TMF F-14 has wrong and inaccurate speed and fuel indicators, i found out the default Third Wire F-14 has working and accurate ones, but i dont wanna use it cause the TMF Tomcat is better and the cockpit too more realistic too, so can you switch the speed and fuel indicators on the TMF F-14 with the default Third Wire F-14? And for fuel too? Do you need to 3D model and/or do something else other than edit some text files?
       And is it or it's not possible to do?
      Down here are 2 pictures from the correct cockpit in the default Third Wire F-14:


      And 2 from the TMF F-14 (the inaccurate one):


       
      Thanks for helping.
    • By VonS

       
      Apr. 17, 2023 Update - Please find, available at the link below, my previously released mods. for RoF United Ed. - this time as a convenient, consolidated package that has been updated with the latest tweaks. Do read the included "Read Me" files, where available, for more info., particularly the "READ_ME_ROF_General_Info" file that is located in the root folder of the package when unzipped. This package is provided "as is," with no active support beyond the included explanatory files. The "Consolidated Mods. New" Package contains the latest AI mod. (ver. 1.4) for RoF United, as well as mods. previously offered separately, such as the "M-S Type H Campaigning Tweak," the "PWCG modulations" files, etc.
      Apr. 29, 2023 Update - Included below the link to the "Consolidated Mods. New" package is Ver. 3 of the PWCG "modulations" files (to be installed manually in the PWCG ver. 16.3.1; see directions included in the larger, consolidated package). Ver. 3 of the "modulations" files increases wind and turbulence settings, as well as provides greater chance of encountering more capable AI when flying PWCG campaigns, especially if used in conjunction with my newer AI mods. for RoF (such as ver. 1.36 or 1.4, included in the big consolidated package).
      Important Note: if using the Ver. 3 PWCG "modulations" files, instead of the Ver. 2 ones included in the big consolidated package for RoF -- make sure to change settings, if you choose to change any, from within the modulations, i.e., the RofCampaignSpecific, files themselves -- otherwise, tampering with relevant settings from within the PWCG advanced menu options will automatically delete extra entries for the AI that I've included in the Ver. 3 modulations. This note does not apply to the Ver. 2 modulations since those don't contain any extra AI settings.
      Feb. 6, 2024 Update - RoF AI mods. vers. 1.36 and 1.4 have been upgraded to vers. 1.37 and 1.41, respectively. The new versions have tweaked the AI's ability to follow commands more quickly and/or properly. Ver. 1.41 also contains further tweaks to safe alts. for the AI, to minimize unnecessary crashes and very low-level dogfighting. The entire consolidated package has been renamed from "Consolidated Mods New" to "Consolidated Mods New V.2" (i.e., Version 2).
       
      ROF_ConsolidatedModsNewV2_VonS.zip
      ForRoFpwcgModulationsVer3_VonS.zip
      Happy flying,
      Von S 
       
       
    • By JamesWilson
      Hi everyone,
      I was wondering how to customize the numbers after your callsigns, since it always gives me the same ones.
      I think i managed somehow once, a bit of time ago, but now i forgot and have no idea how to.
      I'm not talking about how to customize the callsign name, but the unit number after it.
      As you can see in the Roster and in the picture under, i get "Fast Eagle 1-1" and "Fast Eagle 1-2"
      Here are some examples:


      The numbers on the tail, wing and nose numbers are customized, cause i managed how to change them, choosing them individually for each unit in the mission file by changing "AircraftNumber=" and typing the number, like "2" (as for 202). It doesn't change by typing the whole number tho, like 202 by typing 202, but it goes by typing the number that corresponds to the list of numbers you have. For example, In a list that goes from 200 to 400, you will have to type 10 to get 300. Here i just typed "2" and "7" since the list starts from 200


      IIRC, in the past i just used to type the Aircaft number just like that, and in-game i had the proper number after the callsign, like "Fast Eagle 102", not just the number displayed on the plane livery.
      How do i do? I'm pretty sure that it's possible to have "Fast Eagle 102" on my screen HUD and in the Roster
      Thanks in advance for helping me.
       
    • By Sabre1BR
      Hello gentlemen.
      I am getting back to SF2 since my last time by 2019 or so, and i wonder if in these three years off what would be mods you guys think are a must to play the game now.
      Any suggestions?
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..