-
Posts
1,290 -
Joined
-
Last visited
-
Days Won
11
Content Type
Profiles
Forums
Gallery
Downloads
Store
Everything posted by baffmeister
-
Adding Trim
baffmeister replied to JSF_Aggie's topic in Thirdwire: Strike Fighters 2 Series - Mods & Skinning Discussion
If you want to take things one step further, after doing JSF_Aggies edit you can also remove the automatic pitch trim feature by modifying the aircraft data ini. This will more or less force you to use the pitch trim at times. Here's an example using ThirdWires Lightning 53. I gave this a quick test and some trimming required during normal flight with more required during approach and landing when extending gear and flaps. [FlightControl] StallSpeed=71.02 CruiseSpeed=206.42 ClimbSpeed=347.62 CornerSpeed=194.97 LandingSpeed=72.35 MaxG=6.00 MaxSpeedSL=334.58 MachLimit=2.000 MachLimitDry=1.227 PitchDamper=0.6 RollDamper=0.4 YawDamper=0.0 SideslipDamper=0.0 StabilityAugmentation=0.5 GunBoresightAngle=0 RocketBoresightAngle=0 FlapSettingForLanding=1 FlapSettingForTakeOff=1 AutoTrimLimit=0.0//....................................................................ADD THIS I don't have enough buttons on the stick to run this and prefer the auto pitch trim feature anyway but this might be of interest to some. I think Strato's was checking this out at one point but not sure if he ever noticed any issues. -
Operation Seelöwe
baffmeister replied to Gepard's topic in Thirdwire: Strike Fighters 2 Series - World War II Forum
There is a way to reduce it to 1 deg increments using TAE. Possibly with left click or right click on the mouse. Can't remember exactly. -
Next up!
baffmeister replied to amariani's topic in Thirdwire: Strike Fighters 2 Series - Mods & Skinning Discussion
Awesome photos! Do you know where they were taken? -
Operation Seelöwe
baffmeister replied to Gepard's topic in Thirdwire: Strike Fighters 2 Series - World War II Forum
I think this terrain will get me back into SF2-WW2. An ETO install on my new computer at least. -
Operation Seelöwe
baffmeister replied to Gepard's topic in Thirdwire: Strike Fighters 2 Series - World War II Forum
The new London tiles look awesome! A question for model builders: Is it possible to reduce the size of the Tower of London without the Max file? The current model looks much too large but it's probably the only one available. -
I think that's about where I was at when I started suspecting missing Tods. Possibly around 500-600KB for the size of the "Game Tod" Have you figured out the "Safe Saving" technique for the Tod.Ini, that the Terrain Editor uses? If you get a good save on the Tod.ini it can be re-loaded into the Terrain Editor and you can try again. I was having issues getting the Tod.ini to save much over 500 objects but if you do multiple saves, and check the results prior to closing the TE, you can have a good Tod.Ini to re-load. Prior to closing TE, open the Tod.Ini and check the object count at the top, then scroll to the bottom and check the number for the last Tod. It should be one less, because the count starts from zero. To re-load the Tod.Ini, place it in the TileSet folder. The updated Tod.Ini will save in the Terrain Editor folder while the one in the TileSet folder will be unchanged. Regarding the "GameTod", the multi save approach doesn't seem to help so I tend to think there may be a hard limit or fatal flaw. It may be worth monitoring the size of the GameTod to get an idea of when you're near the limit.
-
To calculate inertia, find a ThirdWire aircraft with a similar configuration and mass, then copy the inertia values. [I know that sounds lame but I tried a simplified approach once and the results were off the charts.] Just an observation but in the Hud De-Bug mode the Inertia values are shown in Slugs-Ft^2 [whatever that is ]
-
What If Screenshot Thread.......
baffmeister replied to Dave's topic in Thirdwire: Strike Fighters 2 Series - Screen Shots
A single tile walled town, somewhere over New Dhimar. Almost 8 hours of work to tod one tile but I would like to add a couple more versions. -
Data.ini for the TW MiG-21F attached. This has the same aerodynamic changes as the latest Bis FM's. The rack/rail weights have been adjusted based on the Bis info and I added Svetlin's nose gear edit but forgot to have a look at it in game. The ammo load out has been increased to 60 rounds, based on information obtained from another thread. There may be a possibility some early Soviet versions only had 30 rounds but it seems like the 60 round load out was standard by the time the type was getting exported. Canopy is on Shift0[zero] The lighter weight MiG-21F seems to have a bit better chance of getting a guns solution at the low end of the speed range but I'm a bad shot and haven't managed it yet. I did do some successful evasive maneuvering in the low speed range and think you can probably force an overshoot against most of the ThirdWire types but watch the sink rate at low altitude. Here it is: MIG-21F_DATA0.96.zip
-
SF2 F-16A
baffmeister replied to hawker111's topic in Thirdwire: Strike Fighters 2 Series - General Discussion
Not sure what the actual aerodynamic limits might be for an F-16A but the type did have an automatic G-Limiter installed. A long time ago someone came up with an aerodynamic G-Limiter for the stock TW F-16A. I think it was Caesar who passed it along to me. The modified FM is attached at the bottom. The mod works quite well if you fly in a normal fashion with just temporary high G turns. At high speed if you just pull back on the stick and keep it there it will piss away all your speed until you get below about 9 G's. The limiter kicks in a bit over 9 G's so theoretically if you kept the plane at exactly 9 G's at a high enough speed it could sustain that but I doubt that's possible in practice. I don't fly the F-16 much so not sure if this mod has any affect on the AI. Here's a "drop in" F-16A data/FM with the only mod being the G-Limiter: F-16A_G-Limiter.zip -
Test FM's for the two ThirdWire MiG-21Bis models attached at the bottom. The main objective with these is to try and model the high alpha behavior as described in the flight manual. I had to make way more changes than expected to add only about 5degs to the existing AoA range. With the revised FM's I'm trying to model some lift transfer from the outer to inner wing panels. According to a document I read this occurs in the 20-25 deg range. To get a smoother transfer I went with the low end of the range at 20deg. The edits to the outer wing panel limit the CLmax to what it would be at 20deg, based on a straight line variation. The "surplus" CLmax has been added to the inner/forward wing panel that has a revised stalling angle of 20deg, so it transitions to the CLmax slope at 20deg and continues up to a new AlphaMax of 33deg, versus the original at 27.66deg. Some additional CLmax has been added to model the added lift available at 33deg. Some additional edits were required to the StallMoments and the StallXACShift tables to reach the higher AoA range. Here's a description of the idle power level flight stall behavior at 5000m/16400ft from the Bis flight manual, with some comments regarding the revised FM's in brackets: 340-370kmh /184-200kts: pre stall buffeting [around 170-175kts] 280kmh / 151kts: Aileron deterioration [somewhat noticeable] 230-240kmh / 124-130kts: Wing rock develops but pitch stable [no noticeable wing rock] 220-230kmh / 119-124kts: Aircraft starts to pancake [ I assume that means a high sink rate but pitch stable, which it does] 200kmh / 108kts: Large wing rock up to 50deg left/right at about 6-10deg sec [ Nope! ] I did some back to back testing with the stock and revised FM's and the sustained G remains about the same but the revised FM generates a higher instantaneous G due to the increased lift available at 33deg. The only way I found to check the low speed behavior was some calculated data from the CheckSix website. The test involved a very low speed turn at mach 0.22 / 133ktsIAS at 5000ft with two R-60's and 50% internal fuel. It was quite difficult to fly accurately but the best results were within +-2sec of the calculated data. The calculated data is 52sec for a 360deg turn. [6.9deg/sec] Some additional edits from the flight manual: Gear limit speed: quite high at 600kmh / 324kts. The sop's for landing call for gear down first at 550kmh/297kts then approach flap at 500kmh/270kts with full flap selected at 400-420kmh / 227kts. Flap limit speed: Not even mentioned in the flight manual and no description of the "floating flap" system! I based the flap1 speed on the sop's and the flap2 speed is the TW original. The rack weights have been adjusted using the info from the technical manual and the MiG-23 800L tank has been added as an option. Recommended take off rotation angle is 11-13deg. The manual calls for early aft stick, maybe due to ground effect issues, but I find 130-150kts, depending on weight, and 13deg AoA gives a nice lift off at the proper speed. Typical approach speeds at light weight are quite high at 180kts but that's probably due to over the nose visibility issues. The target touch down speed is considerably lower at 150kts. The canopy works with Shift0[zero] I've found the additional AoA range quite useless during dogfights due to the rapid speed loss. It's sometimes useful for evasive maneuvering but that's really a last chance maneuver, it's better to keep the speed up. An interesting document here describing the U.S. tests on a MiG-21F. https://theaviationist.com/wp-content/uploads/2013/11/havedoughnut.pdf I have read some other documents describing how skilled U.S. aggressor pilots could trick the rookies into low speed turn and burn dogfights with the MiG-21's and F-5E's but once the lesson was learned the results were much different so better not to go there. Even the ThirdWire AI will be flying rings around you! Revised FM's here: MiG21bisFMs0.96.zip I'm going to modify the light weight MiG-21F as well, it should be ready soon.
-
DCS/LOMAC Screen Shot Thread
baffmeister replied to Dave's topic in Digital Combat Simulator Series General Discussion
Nice looking game. Back from Sidewinder training. [unlimited weapons] DCS is more or less as expected. Steep learning curve, good flight models, and resource intensive. My new Dell G5 is probably mid range for this game but it's good enough for the old jets and light missions I'm interested in. For now it's mainly a fly around sim but will gradually work into some light combat missions. I think the F-86F and MiG-15 Bis will keep me occupied for many months! -
View File CF-100 MK-4B NORAD 1958 SKINS Additional CF-100 MK-4B NORAD skins for 1958-1962 ERA. INSTALLATION: Add the skin folders to the CF-100_Mk4B[NORAD] aircraft folder. 419,423,440 and 445 squadrons were in Europe during this time frame so they aren't included in this North American pack. CREDITS: 1977Frenchie Submitter baffmeister Submitted 12/13/2019 Category Other Origin
-
- 1
-
-
Version 1.0.0
52 downloads
Additional CF-100 MK-4B NORAD skins for 1958-1962 ERA. INSTALLATION: Add the skin folders to the CF-100_Mk4B[NORAD] aircraft folder. 419,423,440 and 445 squadrons were in Europe during this time frame so they aren't included in this North American pack. CREDITS: 1977Frenchie -
View File CF-100 MK-4B NORAD SKINS Three additional skins that didn't fit in the CF-100 MK-4B NORAD upload. INSTALLATION: Add the skin folders to the CF-100_Mk4B[NORAD] aircraft folder. CREDITS: 1977Frenchie This package is subject to the CombatAce Modders Licensing Agreement Submitter baffmeister Submitted 11/29/2019 Category Other Origin
-
- 1
-
-