Lexx_Luthor

Radical F-106 pitbulls look here...scroll down a few poasts ~> http://bbs.thirdwire.com/phpBB/viewtopic.p...c&start=168

Thanks. This is good stuff everybody should know how to do. My current settings... [MapSettings] MapMaxSize=2000000 MapMinSize=10000 MapInitSize=500000 MapScaleRate=100.0 ZoomControl=CAMERA_ZOOM_CONTROL If I recall, my map scale rate allows very fast zooming, although as you zoom out, the framerate drops horribly. I guess I should reduce my mpa min size, but its good for long range intercepts.

Wrench, try just two or three cities in the CitiList, delete all the others, and take out the non-stock objects in the remaining two or three cities. See if it works in-game. This is how you track down causes of errors. If it works, it could be the objects. If it does not work, its something else.

Piece of pie. Its so easy, a flight simmer could do it. In the terrain's CityList, define a city with HasAirfield=TRUE for each target area, even if there are to be no city or buildings there. These should correspond to your TargetAreaXYZ's. In my experience, the Level Airfield command is the last step in using Terrain Editor -- after that its a SAVE ALL and your done. Minimum reliable size is 4km by 4km, as I've found that 2km x 2km does often misses the mark. I don't know how these cities-but-not-cities will effect the campaign engine's operation.

My faves share a common theme -- interceptors higher, faster, further, at a time when different aircraft actually looked different from each other. Siemens Shuckert DIII MiG-3 F-106 ...after that, military aviation round the world was forever cancelled in favour of Big Missile by the McNamara-Krushchev-Sandys alliance.

Yea you can use overcast conditions in KMD mission editor and set the cloud bottom to low levels. That's totally normal stuff the game supports, not the weirdo stuff I'm doing.

Wind can be set in the mission files or use Kreelin Mission Editor found here at CombatAce. For campaign use, I guess you need the Enviro file's wind section, but I deleted that from my Enviros since I don't do SF campaigns. I do alot of Enviro molding. Link here talks about this ~> http://bbs.thirdwire.com/phpBB/viewtopic.p...asc&start=0 And this old link here, from long ago, talks about how some Envrio stuff works... ~> http://bbs.thirdwire.com/phpBB/viewtopic.php?t=1447 -- but is very old stuff now.

I'm very good at Texture Listing terrains, especially efficient tile naming systems, but I can't do terrain tiles themselves -- very sad. If you'd like, we can try to find a way for TK's campaign engine to generate occasional non-combat "vehicles" that carry cirrus clouds. Right now, the method I use is a molded cargo ship with visibility restricted to 500 meters (for testing only), speed set in KMD, and the results are useful for single missions or static campaigns or something like peronalized YaP missions. Below are cirrus clouds under (1) the stock Environment system lighting but with an experimental sun more suitable for screenshot (2) which is an experimental more deep blue winteresque or high altitude colour...

AwSim detail in pilot area. Beautiful.

If a BM could be made pounded out of an AI aircraft, a SAM could be molded into ABM. take alot of pounding though. As experiment, I once set up player MiG-21F at 200km and super high speed. At mission start I had ZERO IAS but was moving across the map. Eventually I started tumbling downwards, IAS going positive and negative, me entering black and red outs alternately. I finally pulled out of the tumble and recovered at maybe 2km altitude. I do believe the true speed slowed as I entered the deep atmosphere (otherwise I'd hit the ground). The atmosphere modelling is all there, but the heat and structural modelling on the aircraft are missing.

Next is setting up some kind of player and AI targetable object that flies across the map at 7km/s at 200km altitude. This should be possible.

MajorLee, how did you get the map so large? That is AWSIM I suggest a small set of large 3D iceburg models, placed in terrain file. Would that be Correct Thinking? .. You see talk of the Arctic as being a competing ground for new resources, which would make an interesting theme for a post-modern campaign. If Terrain Editor could only do a circular polar map.

Now you can start experimenting with different values until you get what you want. To tell the truth, I have not done that yet for myself for the six yield ranges. I'm nowhere near being ready to even test play my stargetic campaign ideas. That'll come later.

Right! I only made VISUAL effects to go with your existing nucular weapons as described in the CombatAce download, which also now describes the need to ramp up high explosive effects. The game does not support Nukes, so use High Explosive, experiment with values around 1E+11 and work up or down from their, depending on yield and the physical effects you desire. The Weapon Editor (and all ThudWire ini files) can make use of the exponential notation we all remember from hi~school. The condensation rings (shockwaves) I made ... its all described here, midway down this ThudWire page here ~> http://bbs.thirdwire.com/phpBB/viewtopic.p...70&start=16 ==========================---- Condensation rings (or fog rings). Modelled only for 300kt yield and above, these rings are a huge compromise. With the 16 emitter limit that I bumped into with the emitter-heavy 30Mt effect, I use only one emitter for the fog rings, and its not enough to model what really happens.... : : etc... : =========---=================------ Nice pics by the way! Thanks!!!! Tip -- Something I thought of only recently. For DAY missions, you could disable the SkyGlow if you like. The vast SkyGlow tries to simulate the glow on the horizon seen by observers hundreds of miles away from night time nuc tests.

You know, the ship wakes could be ramped up a bit...alot more than a bit...to make following them easy if that is desired. You often read pilot accounts of finding ships or fleets of ships by first spotting the wakes at 50 miles or so. In the book Lost Moon (or at least in the movie??), Lovell talked about following the glowing algae in the carrier's wake to find it at night. Shucks, I have aircraft contrails that can be set to about 20 minutes duration and can be seen from 500km distance. 20 minute B-47 contrails on the horizon, about 300km long, measured by B-47 at 540KTAS.

AV8 cockpit, I believe by Harrier Team. Its pretty nice and simple. However, if it has the complex relative motion airspeed guage, that could be a problem, and is why I gave up trying to use F-104 cockpit. Overall, the DogSabreTeam's F-86D cockpit works best for me -- and it has a radar for the interceptors which TK would never model unless he gets into stargetic air warfare, LeMay style, Wings Over Siberia or somewhere.

Thanks. I did put an alert on the first page. The last thing I want is people wasting their time on something that doesn't work out or worse not being able to find the problem.

Paladrian told me about bad grafix problems after figuring out it came from my Generic Cockpits molding project... Paladrian's Poast ~> http://bbs.thirdwire.com/phpBB/viewtopic.p...0&start=192 Anybody else who tried this having problems? I don't know of anybody else who tried this project for themselves. I'm thinking of taking that whole thread down, and just using the results I find with "SF~esque artwork" or whatever instead of sharing active molding ideas.

I've been thinking of vast thin "3D" cloud layers, with somewhat irregular holes using transparancies, and suitable skin texture. Set to a dedicated ground object or ship and it the cloud sheet can move across the map. No collision boxes of cours. If I ever got the MAX I'd like to try making clouds. Eventually, I'd do something like huge 3D cumulus clouds with skin textures, and reflections like on white painted aircraft. Anybody interested in trying something like this?

This is what is inside the An-12 external model. For a *very* quick test, I use a fast lashup job with A-4B panel. A-6 panels may be better, and a stock animated ThirdWire co-pilot can be added to the right crew compartment area.

AV-8C cockpit. That's one of my faves. No radar. I always wondered if it would be a good fit for earlier aircraft.

What I'm using for La-15 and MiG-15, -17 F/PF/PFU, -19 S,P,PM: scroll down ~> http://bbs.thirdwire.com/phpBB/viewtopic.p...0&start=128 For a general releace, we'd need permission from DogSabreTeam, ArmourDave, and Wrench. Below we apply the same stargetic concept to Pasko's Yak-25 model...

You should be able to "move" the radar out of view.

Yak-3

Star-getic Wrench:: hehehe ... I guess it could be generic cockpits strategically applied across many models. For now, I am only doing stargetic aircraft relevant to SAC vs PVO, the LeMay years, but this assumes some TAC aircraft will play a role also, and maybe some stargetic NAVY planes, and possibly RAF (Mossie and Vulcan!!). But I have done one special request, and when I run out of SAC/PVO stargetic aircraft, I'll explore A-Team's and others' WW2 aircraft.