SF/WO* Aircraft Skins

VC-5 'Checkertails' drone controller scheme for the Mirage Factory F-8B
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
 
Extract the contents of the rar file named '5DC' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

RF-101C ANG Pack
 
From each ANG state that flew them.
 
Arkansas
Michigan
Kentucky
 
 
Put into your RF-101C and go fly.

F-86E(M) Italian Air Force - 2^ AeroBrigata Intercettori Diurni (2nd Daylight Interceptors Wing)
 
---skin for Sabre Mk4 mod by Wrench---
(Sabre Mk6: original model by Zurawski)
 
 
This skin represents the early camo, later replaced with a "bare metal" style.
 
Tested in SF1 Gold, WoV and WoE (pre and post Sept. 2008 patch)
 
Skin resolution: 1024x1024
 
Please, see the readme for installation instructions and other stuff.
 
Credits:
Templates by: Guest? Author unknow, but i have found the templates here, at CombatAce.
Someone knows who is the author? I want to give him proper credits. Thanks!
 
Thanks to:
Steve S: for its great support in my first attempt to make an historical skin. Grazie Steve!
Soulfreak: for the interesting link.
Erikgen: suggest on slats. (Sorry, forgotten in my previous readme...)
Column5: for the decal tutorial in Knowledge Base section
All the italian section at Combat Ace forum. Thank for the support!
Wrench: for Sabre Mk4 mod.
Zurawski: for its outstandings Sabres.
 
 
Legal:
This skin is release under Freeware Licensing aka Fair User Terms. Simply 3 rules:
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
 
For more informations, check this topics: http://forum.combatace.com/index.php?showtopic=26131
 
One more time: sorry for my English...
 
Spitwulf
Somewhere in North Sardinia, Italy
October 2008

Voodoo skin pack by Pappychksix and Dave
 
The SunRun3 folder goes into your RF-101C folder along with the KY folder.
 
27th TFW goes into the F-101A folder.
 
Sun Run and 27th TFW skin by Pappy. (Thanks Pete)
 
KY skin (just a decal job) by Dave.
 
Enjoy.

This is a original product to mirage factory.Thanks all to offer this beautiful aircraft!!!
 
This is my first contribuition to this site and if i forget somebody please im sorry, Im newbe in this things .

2 sharmouth skins one for the Ecr/Ita and one for the Ids/harm Italian Air force.

F4D-1 Skyray Templates by Julhelm
 
---------------------------------------------
 
Legal s**t:
 
This file cannot be used in any payware packages or such, it also cannot be changed or tampered with in any way, or uploaded in any shape or form by a third party without my consent or permission.
 
Failure to adher to these rules will be punished by summary execution by firing squad - Your next of kin shall be billed for the expended cartridge.
 
You have been warned.
 
------------------------------------------
 
Nils 'Julhelm' Dücker
 
NilsD@bredband.net

This skin depicts the F-104G's of 306°Squadron of Royal Netherlands Air Force,the Recce squadron based at Volkel AFB.

F-86E(M) Italian Air Force - 4^ AeroBrigata Intercettori Diurni (4th Daylight Interceptors Wing)
 
---skin for Sabre Mk4 mod by Wrench---
(Sabre Mk6: original model by Zurawski)
 
 
This skin represents the early camo, later replaced with a "bare metal" style.
 
Tested in SF1 Gold, WoV and WoE (pre and post Sept. 2008 patch)
 
Skin resolution: 1024x1024
 
 
Please, see the readme for installation instructions and other stuff.
 
Credits:
Templates by: Guest? Author unknow, but i have found the templates here, at CombatAce.
Someone knows who is the author? I want to give him proper credits. Thanks!
 
Thanks to:
Steve S: for its great support in my first attempt to make an historical skin. Grazie Steve!
Soulfreak: for the interesting link.
Column5: for the decal tutorial in Knowledge Base section
All the italian section at Combat Ace forum. Thank for the support!
Wrench: for Sabre Mk4 mod.
Zurawski: for its outstandings Sabres.
 
Legal:
This skin is release under Freeware Licensing aka Fair User Terms. Simply 3 rules:
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
 
For more informations, check this topics: http://forum.combatace.com/index.php?showtopic=26131
 
P.S. sorry for my English...is very poor...
 
Spitwulf
Somewhere in North Sardinia, Italy
October 2008
 

VF-13 'Night Cappers', CVW-10 skin for the Mirage Factory F-8E
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
 
Extract the contents of the rar file named 'NC65' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

TPS scheme templates for the Mirage Factory A-7E.

Here is the skin from the EC 01.007 Provence of the French air force Rafale to use with FoxMonter's plane.
 
It is based on a skin made by Fougamagister, thanks to him.
 
Do not use in any commercial way.

By Sony Tuckson.

A-4 Aggressor Pack by Bananimal.
 
These were made for a Top Gun Campaign I made 5 years. They are great skins. Just put into your A-4E and go fly.
 
Dave USAFMTL

MiG-21PFM_VPAFCamo
historical...

VF-24 'Checkertails' low-vis scheme for the Mirage Factory F-8J
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
 
Extract the contents of the rar file named '24lv into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
 
Additional notes
File updated, because decals.ini needed some fixing. Sorry about that.

Ferris Scheme A-4E's By Bananimal.
 
He made these for me like 4 years ago and I never released them. FOr tohse of you who like A-4's and Ferris schemes, this is your ticket.
 
Enjoy
 
Dave USAFMTL

VF-211 'Fighting Checkmates' low-vis scheme for the Mirage Factory F-8J
 
Making this skin would not have been possible without the work done by the Gunfighters team and the Mirage Factory or without Column5's fantastic template. Thanks a lot, guys!
 
Installation instructions
 
Extract the contents of the rar file named '211lv into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.

F-16A Netz 'Guardians of the Arava' (144 Squadron) skin for WoI:
 
This skin is for Thirdwire's stock F-16A Netz and depicts a batch of F-16A given to Israel under the Peace Marble IV program as a reward for its restraint during the Gulf War. Most of these aircraft were ex-ANG/AFRes aircraft, that retained their USAF air superiority gray color scheme in Israeli service. They joined 144 Squadron at Hatzor AB, making 144 the biggest fighter squadron. It seems that they were randomly numbered in the 7XX range, so I picked 752, 777 and everything in between.
 
INSTALLATION:
Unzip the 'IDFgrey' folder to your F-16A_Netz folder and add the following entry to your F-16A_Netz.ini:
 
[TextureSet002]
Directory=IDFgrey
Name=IDF Grey
Nation=ISRAEL
Specular=0.400000
Glossiness=0.400000
Reflection=0.000000
Squadron=144IDF
 
SOURCES:
http://www.f-16.net/f-16_users_article7.html
http://www.acig.org/artman/publish/article_276.shtml
Eagle Strike Productions: Falcons, Part II (48073)
 
ACKNOWLEDGEMENTS:
Thanks to TK for WoI and all the other great games.
Special thanks to gerwin for his outstanding F-16A template.
 
Have fun!
 
wilco
 
Released under the CombatAce Fair-Use License.
If you have any problems or comments, contact me at CombatAce.

this is a fictional skin of a Germa Air Force F-35A from AG-51 Immelmann
 
thanks to Klavs81 for the great model and the template

This is a fictionnal F-35A IAF skin of the Tayeset 140 "Golden Eagle".
 
Again many thanks to Klavs81
 
Do not use in any commercial way please

This is a fictionnal Greek F-35A skin from the 335 Bomber Squadron "Tigris".
 
Thanks to Klavs81 for this peace of art.
 
For non commercial use only

EA-6B Prowler by Hawker
 
VAQ-133 Jammin Jihad skin
 
by
 
Stormtrooper
 
Skin done to the best of my ability considering some of the
limitations due to the model. No disrespect to the model maker.
 
Installation
Drop folder into the EA-6B Prowler folder.
 
Any questions feel free to ask.
 
Stormtrooper

VMFA-251 'Thunderbolts' TPS for Klavs' F-35A
 
Yes, another of those "I still can't believe that it's really a two-tone scheme" skins...although the pic should convince you that it is indeed one.
 
Installation instructions
 
Extract the contents of the rar file named 'TB_35' into a TEMP folder.
Read the text file for further instructions.
 
Legal stuff
 
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.