53 files
-
Skinpack for stock SPAD VII's
By Eugene2
Default skinpack for stock SPAD VII's.
There are two skins - for French and Russian aviation.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
I removed wing's cockades and rudder's emblems from "Decals.ini" because they were integrated in my skin.
Eugene
55 downloads
- first eagles
- ww1
- (and 2 more)
-
SPAD VII Skin pack of Escadrille 561 for First Eagles 2, Gold & 1
SPAD VII Skin pack of Escadrille 561 for First Eagles 2, Gold & 1.
Just adding small complements and personal markings to the original stock game skins, to represent the SPADs VII used by ESC 561 in Italy. (I'm adding two versions
one for SPAD7_150 and other for SPAD7_180).
This skin pack depict all known SPAD VII as was Flown by Ltt Frédéric Loiseau, Ltt Jean De Limur, Slt Pierre de Jumilhac of Escadrille 561 at Venice, Italy during
late 1917 early 1918.
Historical notes:
- Ltt Frédéric Loiseau after the war, become famous, crossing in 1929 the Sahara desert with a Bugatti Type 40: 11,500 kilometers of unpaved roads and desert. In
1930 Loiseau wrote a book about his adventure “A cent a l’heure a travers le Sahara”.
- Ltt Jean De Limur after the war, become actor in Hollywood and a renowned film director.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
To install this skins pack and ini files, copy or drop the folders named "SPAD7_150" and "SPAD7_180" in your "SPAD7_150" and "SPAD7_180" aircraft folders.
To install the decals, copy or drop the folder named "SPAD7_150" and "SPAD7_180" in your "SPAD7_150" and "SPAD7_180" Decals folders.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "SPAD7_150.ini" file.
[TextureSetXXX]
Directory=ESC561
Name=ESC561 Frédéric Loiseau
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC561a
Name=ESC561 Ltt Jean De Limur
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC561b
Name=ESC561 Slt Pierre de Jumilhac
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "SPAD7_150.ini" file order for others skins that you have already
installed before.
__________________________________________________________________________________________________________
For you to get better profit of these skins I recommend the use of Stephen1918's SPAD VII cockpit, that you are able to download here at CombatAce.com.
NOTE:
I'm adding 2 optional "INSIGNIA002.tga" that I painted to replace the French original game INSIGNIA002. To use it just drop or copy to your main folder "Decals".
Remember to backup your INSIGNIA002.tga if you have already installed one in the main decals folder.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may
not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
25 downloads
(0 reviews)0 comments
Updated
-
SPAD XIII Skin pack of Escadrille 561 for First Eagles 2, Gold & 1
SPAD XIII Skin pack of Escadrille 561 for First Eagles 2, Gold & 1.
Just adding small complements and personal markings to the original stock game skins, to represent the SPADs XIII used by ESC 561 in Italy.
This skin pack depict all known SPAD XIII as was Flown by Sgt André Lévy, Lt Xavier Garros and an Unknown pilot, of Escadrille 561 at Venice, Italy during 1918.
Historical notes:
- Sgt Andre Lévy was the sole ace of Escadrille 561, claiming one Austrian seaplane on November 17th, 1917, and as much as five balloons from June to September 1918, before being shot down by the Flak, just after his last kill (and the last of ESC 561 in WW1), over another balloon. Made prisoner, at Mulbach prision camp on November 2. After two attemts he escaped, climbed an 8,000 ft. mountain to return to Lido airbase on November 6th. He was made Chévalier de La Légion d'Honneur, the Médaille Militaire and Croix de Guerre with two Étoiles de bronze. He was also awarded the Italian Croce di Guerra, two Medaglie d'Oro and two Medaglie da Bronzo al Valore Militare. He passed away on March 12, 1973.
- Lt Xavier Garros claimed two Austrian seaplanes (One Lohner T and one W.13) while flying in ESC 561.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin, octobre-novembre 2004
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
To install this skin pack and ini files, copy or drop the folder named "SPAD13_220" in your "SPAD13_220" aircraft folder.
To install the decals, copy or drop the folder named "SPAD13_220" in your "SPAD13_220" Decals folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "SPAD13_220.ini" file.
[TextureSetXXX]
Directory=ESC561
Name=ESC561 Sgt Andre Lévy
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC561a
Name=ESC561 Lt Xavier Garros
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC561b
Name=ESC561 Unknown pilot
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "SPAD13_220.ini" file order for others skins that you have already installed before.
NOTE:
I'm adding an optional "INSIGNIA002.tga" that I painted to replace the French original game INSIGNIA002. To use it, just drop or copy to your main folder "Decals".
Remember to backup your INSIGNIA002.tga if you have already installed one in the main decals folder.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira skins
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
26 downloads
(0 reviews)0 comments
Updated
-
Default camo skin for SPAD 13's family
By Eugene2
It's the time of default skin for the most popular stock aircraft of all flight sims about WW1 - SPAD 13.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
I removed wing cockardes and rudder's tricolor from "Decals.ini" because they were integrated in my skin.
Put folder "D' into "Objects/Decals/SPAD13".
Eugene
44 downloads
- spad
- first eagles
- (and 1 more)
(2 reviews)0 comments
Submitted
-
Default skin for SPAD-VII"s family
By Eugene2
Default skin for SDAD VII's family in-game integrated models.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Add to SPAD7_150, SPAD7_180, SPAD7_LG :
[TextureSetXXX]
Name=French_PhR
Nation=FRANCE
Squadron=3ESC
Specular=0.800000
Glossiness=0.800000
Reflection=0.500000
StartDefaultDate=1916
Eugene
56 downloads
-
SPAD XIII 138th Aero Sq
SPAD XIII C1. for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Former "Flag Bus" as was Flown by Major Maxwell Kirby commander of 5th Pursuit Group.Germany, Koblenz late, 1919.
Major Maxwell Kirby achieved his sole victory, when serving with the 94th Aero squadron.
When the 94th was returned to the United States, their aircraft went to the 138th AS while still wearing the "showbirds" colours. However the squadron insignia was removed by the pilots of the 94th, and this was replaced with that of the 138th. The emblem of the 138th was the "Charging Ram" within the 'V' signifying the FIFTH PURSUIT GROUP. The 138th Ultimately returned to the USA and disbanded in August-September 1919.
Many of these aircraft then had a further lease on life then they were transferred to the new Polish Air Service.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "138th Aero Squadron" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "138th Aero Squadron" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=138th Aero Squadron
Name=138th Aero Squadron
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
25 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Flag Bus
SPAD XIII C1. "Flag Bus" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Captain Reed Chambers of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
Captain Reed Chambers achieved 7 confirmed victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Flag Bus" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Flag Bus" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Flag Bus" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Flag Bus
Name=Flag Bus
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
20 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Barber Pole
SPAD XIII C1. "Barber Pole" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Dudley "Red" Outcalt of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Barber Pole" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
This Aircraft flew probablly with Marlin guns, and not with Vickers.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Barber Pole" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Barber Pole" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Barber Pole
Name=Barber Pole
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
known issues:
Painting the stripes in spirals was a problem because at the end of the tail's aircraft, there is a distortion that pulls all the lines back. I connected the stripes with each other as far as was possible; so you may notice imperfections in the bottom side.
________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
22 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Little Joe
SPAD XIII C1. "Little Joe" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Leo H. "Joe" Dawson of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. Leo Dawson achieved 4 victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Little Joe" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
This Aircraft flew probablly with Marlin guns, and not with Vickers.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Little Joe" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Little Joe" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Little Joe
Name=Little Joe
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding another (SPAD13_001.bmp) with the front bottom, painted in full green colour as an option.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
23 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Zig-Zag
SPAD XIII C1. "Zig-Zag" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Ben "Casey" Jones of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Zig-Zag" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Zig-Zag" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Zig-Zag" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Zig Zag
Name=Zig Zag
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
23 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Checkerboard
SPAD XIII C1. "Checkerboard" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. flown by Lieutenant Robert W. Donaldson of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919. Lt. Robert W. Donaldson achieved one shared victory in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Checkerboard" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Checkerboard" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Checkerboard" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Checkerboard
Name=Checkerboard
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
23 downloads
(1 review)0 comments
Submitted
-
SPAD XIII Diamond Dick
SPAD XIII C1. "Diamond Dick" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant William H. Palmer of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. William W. Palmer achieved 3 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Diamond Dick" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Diamond Dick" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Diamond Dick" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Diamond Dick
Name=Diamond Dick
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding one optional (SPAD13_001.bmp) with a red star painted on the wheels.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
28 downloads
(2 reviews)0 comments
Submitted
-
SPAD XIII Lightning Bolt
SPAD XIII C1. "Lightning Bolt" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Harvey Weir Cook of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Harvey Weir Cook achived 7 confirmed victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Lightning Bolt" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Lightning Bolt" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Lightning Bolt" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Lightning Bolt
Name=Lightning Bolt
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
25 downloads
(2 reviews)0 comments
Submitted
-
SPAD XIII Easter Egg
SPAD XIII C1. "Easter Egg" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant Samuel Kaye of 94th Aero Squadron.
Ft. Alexander, Koblenz, Germany. April of 1919.
Lieutenant Samuel Kaye achieved 4 victories in WW1, flying with the 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz.
During the Spring of 1919, "Easter Egg" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Easter Egg" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Easter Egg" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Easter Egg
Name=Easter Egg
Nation=USAS
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
21 downloads
(2 reviews)0 comments
Submitted
-
SPAD XIII Sunbeam
SPAD XIII C1. "Sumbeam" for First Eagles 2 & 1
This is a skin for SPAD XIII C1. "SHOWBIRDS" to be used in First Eagles 2 and 1
Historical notes:
This skin depict the SPAD XIII C1. Flown by Lieutenant John Jeffers of 94th Aero Squadron. Ft. Alexander, Koblenz, Germany. April of 1919.
Lt. John Jeffers achieved 2 victories in WW1, flying with 94th Aero Squadron.
The pilots of the 94th Aero Squadron decided to paint their SPAD XIIIs. In an attempt to outdo one another they came up with what were termed the "showbirds". The planes were painted up for the April 1919 Air show at Koblenz. During the Spring of 1919, "Sumbeam" took part of the "Showbirds" SPADs during the occupation duties in Germany, with more eight colourfull SPADs of 94th Aero Squadron.
___________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS :
This skin do not uses decal files, so will be easy install.
To install this skin and ini file, copy or drop the folder named "Sumbeam" in any SPAD 13 aircraft folder that you wish. (it will work with all SPAD 13).
*ATTENTION*
In order to work properly on your loadout menu option, inside the "Sumbeam" folder, there is a TXT file that you must open and COPY the content into your SPAD13_XXX.ini.
[TextureSetXXX]
Directory=Sunbeam
Name=Sunbeam
Nation=USAS
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "ini" file order for others skins that you have already installed.
I'm adding an optional (SPAD13_001_BUMP.BMP) that cleans the engine sides heat exhausts. You must to drop it in the main SPAD13_XXX aircraft folder.
___________________________________________________________________________________________________________
Credits:
- Julio Junqueira skin
- Historical references by Bob Pearson.
- Third Wire Productions for the original files that I used as base to my work.
- special thanks to CombatAce.com hosting the files.
___________________________________________________________________________________________________________
This is freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. This skin may not in any way, be used in any payware additions.
28 downloads
(2 reviews)0 comments
Submitted
-
Castillac SPAD XII
By gterl
Hi
and now something completely different!
Taken out of a comic strip (btw, highly recomendet ->
).
A rather special skin for the SPAD XII (the one with the cannon, which can be found here on combatace).
Installation:
- Drop whole folder 'Edelweiss' in the SPAD_XII folder (..\objects\Aircraft\SPAD_XII)
- Add the lines below into your SPAD_XII.ini at the bottom, of course change the XXX to the next number
[TextureSetXXX] <-- Change number
Directory=Edelweiss
Name=Castillac
Nation=FRANCE
Squadron=unknown
Specular=0.400000
Glossiness=0.300000
Reflection=0.100000
cheers
gterl
86 downloads
(1 review)0 comments
Submitted
-
Flyable Spad 7 IRAS Skin Set
By sinbad
Flyable Spad 7 for Eastern Front Campaign & FE2
This is a skin set and data/ini file mod to permit the stock Fe2 Spad 7 to be a flyable plane, using the TW quality LOD's and bump maps of the FE2 Spad 7. The only Spad 13 piece is the stock Spad 13 cockpit with minor adjustments. There are several skin sets for various IRAS units, including two of the leading aces, Kazakov and Smirnoff. The skins are a joint effort with Stephen1918. I could not do the Beta testing without doing skins! The FM is entirely my fault, a revised Peter01 FM, with adjustments for Russian service, but it could also be used for other nations. The Leprieur rockets are not part of the loadout packages, as I saw no reports of the Russians using them on the Spad 7. Only the 150 HP FM is included because that is the version used by the Russians (there were very few of the others, even in France). The original files are included in case you want to revert to them without expanding the entire Fe2 fileset.
I have not tested this mod in any version other than Fe2, but I see no reason why the skins and cockpit mod should not work in the various forms of FE1, provided you tinker a bit. You may or may not have to delete the bump maps.
IMHO the Jones Soft Mode enabler is the way to get this and other mods in and out of the game, but you can certainly do it all manually if you prefer.
There are also hangar and loading screens (apologies to Frank Luke) to help with immersion in Stephen1918s excellent Eastern Front Campaign.
Enjoy.
149 downloads
(0 reviews)0 comments
Updated
-
Updated Spad 7 serial decals
By Heck
My thanks to Panama Red for pointing out a placement problem with my Spad 7 tail decals. This is the corrected version. See the readme for complete installation instructions.
107 downloads
(0 reviews)0 comments
Submitted
-
Spad 7 Serial decals
By Heck
These are some serial numbers that I created for one of my favorite planes; the Spad 7. Both 150hp and 180hp versions are included. As a bonus, I've included a couple of .png files for creating decals, one for Spads, the other for Belgian Camel serials. A readme with full installation instructions is included. I hope you enjoy.
Heck
66 downloads
(0 reviews)0 comments
Submitted
-
(2 reviews)0 comments
Submitted
-
Spad VII Skins and Misc
By p10ppy
Little Spad VII hop up
Cockpit.ini and Spad7_180.ini
Hanger Screen
Widescreen and normal loading Screen
Default tan textureset (replacement for stock if you wish)
Escadrille 103 (Les Cigones) textureset and decals (Tan)
Escadrille 31 (Hoplite Archer) textureset and decals (Tan)
Escadrille 48 (Rooster) textureset and decals (Tan)
Escadrille 65 (Dragon) textureset and decals (Tan)
Escadrille 81 (Grayhound) textureset and decals (Camo)
Escadrille 94 (Running Reaper) textureset and decals (Camo)
Escadrille 3 (Les Cigones) textureset and decals (Tan)
Escadrille 3 (Les Cigones) Alternative with Stripe textureset and decals (Tan)
Escadrille 3 is skinned to a higher degree than the other Escadrille with personal markings and semi accurate paint jobs/numbers
The French seemed to paint all their aircraft individually so many compromises were necessary
The Folder structure is a little unusual (trying to save space)
Straight under the SPAD7_180 folder there is a Decal folder (combined for all the new decals) and Folders for all the new Texturesets
The main Tan Skins live straight in the SPAD7_180 folder as well so all the tan textureset’s can access then (some textureset folders have replacements depending on Escadrille)
If you haven’t already done so you will need to extract the Spad XIII cockpit from the ObjectData.CAT into a separate cockpit folder under the SPAD7_180 folder if you wish to fly the SPAD7_180 (the two .ini’s provided point to a cockpit folder and make a few changes to the 13’s cockpit but they are not necessary if you have already done this)
If you will need to use the provided SPAD7_180.ini if you wish to use the provided hanger and loading screen (or alter your own ini)
There’s a wide screen version of loading screen in the folder “widescreen loading pic” just copy it over the existing pic or delete it depending on your needs
I suggest you unzip this Download to a temp folder first and take what you need to the SPAD7_180 folder.
Please remember to back up any files that may be overwritten in the SPAD7_180 folder first
These Skins should work fine for the SPAD7_150 as well but the .ini files will be different
Please feel free to use these skins and decals for your own work (non-profit only)
Hope you enjoy them
Vernon
569 downloads
(4 reviews)0 comments
Submitted
-
(1 review)0 comments
Submitted
-
SPAD VII "Whiteknight"
This is my personal SPAD VII now when I piss someone off you can shoot me down.
155 downloads
(1 review)0 comments
Submitted
-
-
(1 review)0 comments
Submitted
Sign in to follow this
Followers
0
-
Download Statistics
14,331
Files12,608
Comments26,977
Reviews