167 files
-
The Blue Max Fokker Dr1s for First Eagles 2
The Blue Max Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from The Blue Max film.
- Fokker Dr.1 flown by the character Bruno Stachel. (Several versions)
- Fokker Dr.1 flown by the character Willi von Klugermann. (Several versions)
The character Bruno Stachel used two Fokkers in the Blue Max film, one with the cowling painted full black and other with the
cowling tip in black.
You will find both of them in the skin pack.
- I did Optional hangar screens for Bruno Stachel and Willi von Klugermann characters. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN" folder of each character.
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Bruno Stachel
Name=Bruno Stachel
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Willi von Klugermann
Name=Willi von Klugermann
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Stachel HANGAR 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
26 downloads
(0 reviews)0 comments
Submitted
-
Fly Boys Fokker Dr1s for First Eagles 2
Fly Boys Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from Fly Boys film.
- Fokker Dr.1 flown by the character Black Falcon.
- Fokker Dr.1 flown by the character Franz Wolfert.
- I did Optional hangar screens for Black Falcon and Franz Wolfert. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN" folder of each character.
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Black Falcon
Name=Black Falcon
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Franz Wolfert
Name=Franz Wolfert
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Wolfert-HANGARSCREEN 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
,
24 downloads
(0 reviews)0 comments
Submitted
-
The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
- A skin to FokkerDr1 by Third Wire Productions used by The Great Waldo Pepper film.
- Fokker Dr.1 flown by the character Ernst Kessler.
- I did Optional hangar screens for Ernst Kessler character. They are in 1920x1200 size.
You will find this in the "HANGAR SCREEN".
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder.
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Ernst Kessler
Name=Ernst Kessler
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Kessler-HANGARSCREEN 01.jpg <------ add this line
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model.
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions.
__________________________________________________________________________________________________________
23 downloads
(0 reviews)0 comments
Updated
-
Early skin for stock Fokker D.VII
By Eugene2
Early skin for stock Fokker D.VII.
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Eugene
66 downloads
- firsr eagles
- skin
- (and 1 more)
(2 reviews)0 comments
Submitted
-
Fokker EI-EiIII skin
By Eugene2
Skin for excellent Fokker EIII by Laton (can be used for Fokker EI,EII).
I tried to add some "photorealistic" textures for more impressive image of this aircraft.
Add to Fokker EI-EIII.ini :
[TextureSetXXX]
Name=StockEIIIPhR
Nation=GERMANY
Squadron=
Specular=0.500000
Glossiness=0.500000
Reflection=0.500000
Eugene
52 downloads
-
Fokker EI
By Trotski
This is the pack of updated skins for the ~Fokker EI I have done 4 skins for the Spandau armed version, as follows:-
A generic factory CDL finish machine, Oswald Bolcke's eindecker, which apparently was also flown by Max Immelman, Unteroffizier Kneistes machine, and finally Wilhelm Frankl, of KeK Vaux , unfortunately, when Laton made the models for this aeroplane, he made the EI Spandau version with wire wheels for some reason, this to the best of my knowledge, was not an actual operational fact, I have yet to see a front line Fokker with no wheel covers, to modify this Laton would need to re do the LODs for this aircraft, but anyhow we must work with what we have at hand !
the Parabellum armed aircraft are another 4 skins, as follows:-
A generic CDL version, ~Max Immelman's machine, Otto Parschau and finally Kurt Wintgens.
All the skins are re works of Gambits, and Von Deutchmarks original skins, and I have re done them as as I said before, I really , really , REALLY hate painted on decals, and avoid them wherever possible. So I have made new decals, numbers etc to just give this early aircraft a bit of a work over, the serials are not particularly accurate for the EI, however the ones for the for the aircraft with named pilots are, and I have tried to get those as correct as possible with the resources available to me. I have included, as with the EIII. all the guns, decals, pilots, and sounds needed to get you up and running, hopefully I have got everything in there, and not missed anything off.
I shall be doing the EII's next, so we shall have a full set of Eindeckers for your delectation. BE AWARE, these skins are for Latons models, and NOT for Borts !!! just in case any one tries it and wonders why they will not work on those models !!
Again, I thank Laton for actually making the aircraft in the first place, tho Gambit and Von Deutchmark for producing the skins for me to play around with, also a HUGE shout out to Von S and his merry band of men for doing all the jiggery pokery and voodoo stuff, and finally to Peter for giving us most excellent FM's
As always....ENJOY
I
69 downloads
-
Josef Jacobs 3-Pack Dr.1's
By quack74
This is a skin pack of three more color schemes used by Josef Carl Jacobs of Jasta 7.
Fokker Dr.1 450/17 - Early with "Winged Devil" and Iron Crosses pre April 1918.
Fokker Dr.1 450/17 - Late all black with Baulkencruez crosses only mid summer 1918.
Fokker Dr.1 470/17 - Late style with all white crosses and black fuselage and wings mid summer 1918.
the numbers and the color schemes might be reversed. But no solid evidence exsists to prove otherwise.
A lot more in the readme file.
Enjoy, quack74
177 downloads
-
unleashed history Red Baron
By Xharyuk
Fokker Dr.1 used to recreate the last flight of the Red Baron in the documentary program Unleashed History released in 2002 , of the channel Discovery Channel :P
119 downloads
-
Waldo Pepper Fokker Dr1.
(S!) ALL hi ;-)
This is the Waldo Pepper Fokker Dr1 .
Special thank you to the A Team for giving me permission to do this skin.
Enjoy!!! ;-)
your friend in the FE sky
von Deutschmark
370 downloads
-
Photorealistic Fokker D.VII OAW
By Hansa
Here it is a "new" fokker with custom sound and cockpit side panels.
Just unzip the folder FokkerD7OAW in your Objects/Aircraft folder and copy BMW.wav to your Sounds folder.
Cockpit graphics by Stephen Honey
It was a dirty war over the front...
Have a good time !!!
P.S. I have included a Fokker Dr.1 skin with the tail fixed.
257 downloads
-
Jasta 11 Ltn. Eberhardt Mohnicke
By quack74
Blue Tailed Jasta 11 Dr1
Pilot was Ltn. Eberhardt Mohnicke and number is unknown to me
But scheme is historically accurate.
Just change the skin folder to J11 Mohnicke and the Textureset as well in the skin folder. Also change the
Textureset in the fokkerDr1 Configuration Settings from J11 Blue Tail to J11 Mohnicke.
Enjoy, quack74
135 downloads
-
Enemy Ace-The Hammer of Hell
By gumpy
The Enemy Ace package one Enemy Ace Skin and it's pilot Von Hammer-The Hammer of Hell Skin,all skins are
just repaints of Thirdwires original skins form the expansion I hope they approve and I thank them to all
ends for this great game.
166 downloads
-
J14 Blue Band Patch
By quack74
This patch will Change the thin bands to red and the main thick band to a light blue
almost gray. This is the way a replica of 489/17 looks. Thanks to a photo sent to me by von tobler.
The thin bands in the blk and wht photo seem too light to be black. Red might be the way to go.
61 downloads
-
The Seven Swabians Fokker D VII
By Dave
Ok all here is my first contribution to FE, this is one of my most
Favorite paint schemes, it is of The Seven Swabians Fokker D VII
Piloted by Gftr. Schutzel’s of Jasta 65 1918, there is a read me in the
Zip for installing, am not to up on how all the data works in FE yet so
I used the default German Camo1 D7 folder for this skin, it is all
Explained in the read me.
your friend in the sky
v. Deutschmark
321 downloads
(6 reviews)0 comments
Submitted
-
Jasta 15 Georg von Hantelmann's Fokker DVII 382/18
By JFM
Jasta 15 Leutnant Georg von Hantelmann's Fokker DVII 382/18, circa June 1918. This skin features new hand-made five-color irregular polygon camouflage, new national insignia, Heine propeller, and Hantelmann's skull and crossbones insignia. See READ ME for install directions.
386 downloads
(2 reviews)0 comments
Submitted
-
Jasta 15 Marconnay
By Warbirds
This is a skin of a Fokker D7 flown by Oliver von Beaulieu-Marconnay in Jasta 15. Be sure to check out all my Jasta 15 skins.
293 downloads
(3 reviews)0 comments
Submitted
-
Fokker DVII Flown by Ltn Alois Heldmann (also flown by Oblt Lothar V. Richtofen in July 1918)
By Jambock__36
Ltn Alois Heldmann Fokker D.VII - serial 244/18 - Jasta 10 / 1918. The misconception that this aircraft was flown by Lothar von Ricthofen comes from a series of photographs taken when D.VII 244/18 was borrowed by Lothar in July 1918. Indeed Lothar von Richtofen's flight in that aircraft, during which he accomplished his 30th victory.
You can select this skin in the "Loadout" screen. Enjoy!
Skin created by "Killer-Ants" (Jambock__36), based on templates and existing paintschemes provided by Thirdwire and profiles by Osprey Publishing "Aircraft of the Aces" and an unamed digital profile. Streak pattern borrowed from a M. Miller rendering.
333 downloads
(0 reviews)0 comments
Submitted
-
Fok EI generic skin
By gambit168
Hi guys
sorry its been awhile since i posted any skins
this is a 95% Fokker EI skin
this skin is 100% finished
just serials and damege textures r 2 do
im aiming 2 tie up some loose ends on some psd's and get the skin's out 2 u over the next few days , but time in photoshop is hard 2 find right now
Hope Every1 had a wicked christmas & is gonna have a great now year
Cheers guys
Steve_T
Gambit168
168 downloads
(3 reviews)0 comments
Updated
-
Jasta 5 Vzfw Josef Mai
By quack74
This is Fokker Dr.1 139/17 of Jasta 5.
This aircraft was a hand down from Jasta 11 originally
piloted by Ltn von Conta.
It was then piloted by Ltn Hans-Joachim von Hippel
and Vzfw Josef Mai both of jasta 5.
I chose to use Vzfw Josef Mai as the pilot.
Enjoy, quack74
77 downloads
(0 reviews)0 comments
Submitted
-
Jasta 40 Fokker D7 of Carl Degelow
By SH71
This skin represents Carl Degelow's Fokker D7 of Jasta 40. the skin was created with perhaps more accurate 5 color German lozenge camo(there is considerable debate on the subject).
Degelow was Staffel commander of Jasta 40. Before the war he worked in the U.S. as an Industrial chemist. He was the last German soldier to recieve the Blue Max. He is credited with 30 victories.
345 downloads
(2 reviews)0 comments
Submitted
-
Jasta 15 Ziegesar
By Warbirds
This skin is a skin of a Fokker D7 flown by Joachim von Ziegesar in Jasta 15.
326 downloads
(3 reviews)0 comments
Submitted
-
Fokker D.VII PaintScheme - Jasta 4 - Ernst Udet
By Jambock__36
Read before install:
This installation will overwrite your "loading screen" and your "FokkerD7.ini" files in the Fokker D.VII folder (drive:\First Eagles install directory\Objects\Aircraft\FokkerD7). Backup these files if you want.
Browse to the main Folder of "First Eagles", select it, click "ok" then "next".
Will be created a new folder called "Jasta4Udet" with the paintscheme used by Ernst Udet in Jasta 4 (Du doch nicht!!). You can select this skin in the "Loadout" screen. Enjoy!
Skin created by "Killer-Ants" (Jambock__36), based on templates and existing paintschemes provided by Thirdwire and profiles by R. N. Pearson.
551 downloads
(4 reviews)0 comments
Submitted
-
Fokker D7 - Franz Buchner
By scrapper
This is Franz Buchner's Fokker D7. Ltn. Franz Buchner had at leaste 40 kills for Germany. He was also one of the few pilots to bail out of an aircraft during WWI. There is some argument about the exact color scheme, so I combined a few. Enjoy!
Scrapper
320 downloads
(3 reviews)0 comments
Submitted
-
Jasta 11 Fokker DVII, DVIIF
By JFM
New Fokker DVII and DVIIF skins for Jasta 11, which replace the stock yellow skins. Early streak camouflage fuselages and new 4-color irregular polygon camouflage on the wings. Intended not to replicate any one plane but instead give Jasta 11 a more realistic representation than do the stock skins. First skins of many to come.
Unzip to temporary folder and consult the READ ME.
344 downloads
(0 reviews)0 comments
Updated
-
Jasta 18 unknown
By Warbirds
This is a skin from a real D7 from Jasta 18. The pilot is unknown.
406 downloads
(4 reviews)0 comments
Submitted
Sign in to follow this
Followers
0
-
Download Statistics
14,207
Files12,488
Comments26,858
Reviews