Jump to content

Subcategories

    1. An SF2 Series upgrade of Suhsjake's A-4A Skyhawk. Two new skins have been added:
       
      VMA-224 "Bengals"..........the first MARINE Skyhawk squadron from MCAS El Toro in 1956.
      VA-43 "Challengers" from NAS Guantanamo Bay in 1956.
       
      A full historical read-me with installation instructions provided.
       
      IMPORTANT: You will already need to have the Thirdwire Series 1 (SF1,WOV,etc) A-4B Skyhawk installed. This mod (like Suhsjake's A-4A) uses the 3D files from this A-4B.
      320 0
    2. +-----------------------------------------------------------------------------------------------------+
      | |
      | Boeing B 707-300 series |
      | |
      +-----------------------------------------------------------------------------------------------------+
       
      The Mirage Factory and Olivier ANGUILLE (BPAo) +RIP+ present :
       
       
      The Boeing B 707-300 for Strike Fighters 2 Series games
      Intended to be used as AI model
       
       
      +-----------------------------------------------------------------------------------------------------+
       
      SF2 Model
       
      Plane
      3D : source model by swede , SF2 model BPAo
      3D : low-res and destroyed models by RoboKong
      Textures : Sony Tuckson, Sundowner
      FM : kreelin
       
       
      Test Team
       
      kreelin, Sundowner, Sony Tuckson, The Mirage Factory , MoonJumper
       
       
       
      +-----------------------------------------------------------------------------------------------------+
       
       
      +-----------------------------------------------------------------------------------------------------+
      939 0
    3. This is the kit to convert in SF-2 Spillone104's great work.
       
      For Ace888, Carlo & Kevin who asked for.
       
      This is NOT a complete plane.
       
      You will need original mod here: http://combatace.com/files/file/11113-f-104j/
       
       
      And F-104G cockpit folder plus F-104G_COCKPIT.in extracted from SF-1/WoE or following Kevin's hints here: http://combatace.com/topic/57393-flyable-f-104s-for-sf2/page__pid__426204#entry426204
       
       
      Some easy work:
       
       
      1. extract my upgrade pack
       
      2. extract Spillo's original mod, in aircraft/F-104J folder copy ALL skins folders
       
      3. paste ALL skin folders in my upgrade pack aircraft/F-104J folder
       
      4. take from SF-1/WoE F-104G F-104G cockpit folder and F-104G_COCKPIT.in and paste in my upgrade pack aircraft/F-104J folder, too
       
      5. that's all folks
       
       
      I added only a SF-2 F-104_Loadout.tga, made by myself.
       
       
      Paul
      334 1
    4. Readme for the Northrop 2 seater aircraft.
       
      ********************************* Version 2.0 Release ********************************
       
      This release combines all previous Northrop 2 seaters into one package and updates them to Jun 2010 standards. Only aircraft not included is T-38C due to lack of a suitable cockpit. Several enhancements to all aircraft have been added, including available bump mapping, new F-5A cockpit enhancements, various other tweaks and fixes.
       
       
      Thanks to the following folks:
       
      331KillerBee - For the skins, additional information and hanger/loadout/loading screens, SF2 weapons pack.
      ChampionsVA56 - For his early T-38A paint scheme.
      Deigo - For his very nice MODusaf pilot skin!
      EricJ - Textures, loading screens, readme construction.
      JAT81500 - For most of the avionics work on which the Saeqeh avionics are based.
      JSF_Aggie - Range addition for the NATIONS.INI.
      Jug - Flight evaluation and assistance.
      Lexx_Luthor - For the Airshow Smoke effect for the Thunderbird T-38A (borrowed from his missile exhaust effects).
      PappyChkSix - For the original skins, which unfortunately were lost when the models were remapped.
      Soulfreak - Reference materials.
      Sundowner - Tips, advice and help.
      The Mirage Factory - For allowing me to use the cockpit, effects, damage textures and sounds from the F-5A and F-5E FM based off of Mirage Factory F-5A and F-5E.
      TK - For the ThirdWire series of sims.
      USAFMTL - For beta testing and advice.
      Vampyre - Technical assistance.
      Wrench - Reference materials.
       
      To my fellow Combatace moderators - For helping me beta test and work out bugs.
      Any errors or mistakes are entirely mine.
       
       
      What you will need first:
       
      Strike Fighters 2/Vietnam/Europe/Israel patched to Jun 2010 standards. This is not for Generation 1 ThirdWire sims.
       
      Optional:
      JSF_Aggie's SF2 Series Range Terrain for the AT-38B single missions. http://combatace.com/files/file/11067-sf2-series-range/
       
       
      What is in this archive:
       
      1. This readme (duh!) and the Readme folder.
       
      2. Effects, Objects, Sounds, Flight folder.
       
      3. Alternate Hanger/Loading screens in the F-5B Vietnam Hanger Screens folder.
       
      4. AT-38B missions in the Missions folder.
       
       
      Instructions:
       
      1. Read and understand this entire readme FIRST!
       
      2. Copy the Effects, Objects, Missions, and Sounds folders to your SF2/V/E/I mod directory. Allow directory merging and overwrites (anything overwritten either belongs to me, is part of the SF2 Weapons Pack or is the exact same as the Mirage Factory F-5 effects and sounds).
       
      3. Optional step: Copy the 2 files located in the F-5B Vietnam Hanger Screens directory to your mods/Objects/Aircraft/F-5B directory and overwrite.
       
      4. Optional step: Copy the Flight folder to your SF2/V/E/I mod directory. Contains a NATIONS.INI file that changes Iran from Friendly to Enemy and adds the Range nation. If you have a modded NATIONS.INI already, you may want to insert the proper entry by hand. You will NOT need the Range NATIONS.INI.
       
      5. Optional step: Download and install the SF2 Series Range.
       
      6. That's it! You should see the aircraft in your selection screen.
       
       
      Aircraft Information:
       
      Consult the various readmes included here for specific variant information.
       
       
      Notes and Limitations:
       
      This uses the 'Open Cockpit' method to place the cockpit model 'inside' the external model. This also allows the ability to add flight controls to the cockpit, which originally didn't have them modeled for the F-5F. Downsides are the that during inclement weather, it will appear 'foggy' inside the cockpit.
       
      Capable of being flown from either seat through editing of the main aircraft ini file. Simply uncomment the lines that have the seat you want to fly in, and comment out the lines with the seats you don't want to fly in. The default is the front seat.
       
      The gunsight is new and part of the aircraft. You will not have a gunsight if you fly without a cockpit. Also, the gunsight has an ability not normally available to ThirdWire aircraft...use your thrust vectoring control to activate it (make sure your thrust vectoring control is in the neutral position before you start the mission).
       
      The FM is reasonably 'close' to the real thing...but defaults to being 'fun' vs being 'perfect numbers'. It gives a reasonable impression on how the aircraft actually flies...but don't expect to hit all the 'numbers' perfectly.
       
      This is FREEWARE only, NO money is allowed to be made on the contents of these files, in whole or in part. Released IAW the freeware accords at CombatAce.
       
      Feel free to redistribute, as long as the original authors are given appropriate credit.
       
      Questions? Contact me at Combatace.
       
      FastCargo
      10 Jul 10
      1,607 0
    5. F-84F ThirdWire SF2 Tweaks and Bits 06-04-10
       
       
      Credits:
      F-86F Cockpit by Zurawski
      Early 1960's French Pilot by Corktip 14, based on Diego's USAF Korean War pilot.
      Martin Baker Mk3 Ejection Seat by ravenclaw_007
      F-84f Hangar Screen from the Mirage Factory F-84F Package
      F-84F Loadout tga by Paulopanz
      F-84F Data.INI tweaks and F-84F Loading Screens by NeverEnough
       
      The Thirdwire F-84F model is very nicely done for an AI only model, and can be easily finished into a real fine ride.
      The latest version included in the SF2 Expansion Pack did not have the flap deploy and retract settings in the Data.ini, so these have been
      added in this tweaked Data.ini. The taillight was located about six feet behind the aircraft, and the navigation lights on each side of the tail
      are modeled but have no entries in the stock Data.ini. The tailight location was corrected and the tail navigation lights are added in the included
      Data.ini. The front landing light has also been added, and SHIFT 0 will open and close the cockpit canopy.
       
      The early 1960's French pilot is a nice addition, and he looks great sitting in ravenclaw_007's beautiful new Martin Baker Mk3 ejection seat.
      The new loading screen is a French F-84F with Suez campaign stripes, which looks especially fitting when used with Paulopanz's Suez SuperPack skins!
      An alternate loading screen of a beautifully restored Italian F-84F is also included for a SF2E installation.
      Give this kite a test drive, and discover what a treat it is. Be sure to include Paulopanz's Suez skins, and you will be looking good.
       
      ---------------------------------------------
       
      Installation notes:
       
      Simply copy the contents of the included Objects folder into your Mods\StrikeFighters2 Israel, Mods\StrikeFighters2 Exp1, or Mods\StrikeFighters2 Europe folder.
      To use the Italian F-84F Loading Screen, change the line in the F-84F.INI as shown below:
       
      [AircraftData]
      AircraftFullName=F-84F Thunderstreak
      AircraftShortName=F-84F
      AircraftDataFile=F-84F_data.ini
      LoadoutFile=F-84F_loadout.ini
      UserList=F-84F_UserList.ini
      CockpitDataFile=F-84F_COCKPIT.ini
      HangarScreen=F-84f_HANGAR.bmp
      LoadoutImage=F-84F_LOADOUT.tga
      Loadingscreen=F84F_Loading.bmp <<<<<<<< Change this to F-84F_Loading.bmp
       
      ---------------------------------------------
      614 1
    6. Greek F-4E AUP for SF2 series.
       
      Tested with Dec2009 combo pack patched to Feb2010.
       
      New model, new details.
       
      Uses the F-4EJ Kai pit. [included].
       
       
      Thanks to;
      Oli [bPAo, RIP my friend ]
      Crab_02.
       
       
      Sundowner May 2010.
      651 3
    7. This is a pack of 2 additional aircraft for the SF2 series......The RF-4E as originally supplied to Greece with slatted wings and the RF-4EJ as used by the JASDF.
      Both are made from BPAo's original RF-4 model which he and myself were working on before his tragic death last year.
      There is no way that I could finish these models to Oli's standards but I've done the best that I can, thanks must go to Crab_02 for letting me use his intakes & other details & for all his help and advice.
      572 3
    8. Mirage Factory F-4EJ and F-4EJ KAI
       
      SF2 model by bpao (RIP my friend)
      Tweaks and additional heavy modeling details by Sundowner
      Skins by Sundowner
      Screens by USAFMTL
      Orginal pit by Bunyap
       
      Represents the correct hardwing models of the JASDF.
       
      To install:
      Drag and drop the contents of this zip to your:
       
      C:\Users\<Name>\Saved Games\ThirdWire\StrikeFighters2 folder and go fly.
       
      Enjoy
      USAFMTL
      1,141 0
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..