36 files
-
3 Fictional Sabre/Fury Planes for SF1
By Geary
2 Fictional Sabres and 1 Fictional Fury for SF1
You will need columns5's FJ-3M Fury from here: http://combatace.com/files/file/525-fj-3m-fury-addon/
This pack contains files to convert the FJ-3M Fury to:
1 - A USN FJ-3B Attack Fury, a fictionalized version of the real USN FJ-4B Fury ground attack variant of the FJ-4 Fury - capable of carrying AGM-12B Bulpup Air-to-Ground missiles; Aero 7D_FFAR Pods; AIM-9B Air-to-Air Missles; various and sundry bombs, rocketpods, etc....
2 - An F-86B Attack Sabre. The USAF version of the above USN FJ-3B ground attack jet.
3 - An F-86G Sabre. The USAF version of the FJ-3M - 4x20mm nose guns and 2xAIM9B Air-to-Air missiles.
You will need to install the FJ-3M for each of the above planes you want to install. If you want to install all three planes, you will need to install the FJ-3M three times.
INSTALLATION:
Install the FJ-3M once and rename the installed FJ-3M folder to FJ-3B.
Install another FJ-3M and rename that folder to F-86B.
Install one more FJ-3M and rename that folder to F-86G.
Drop the corresponding folders from this pack into the newly created FJ-3B, F-86B and F-86G folders and overwrite the old files when asked.
To add extra pylons for the FJ-3B and F-86B I used ravenclaw_007's execellent F-86 Bomb Rack weapon from his Canadair CL-13B Mk6 Sabre early or Canadair CL-13B Mk6 Sabre late.
They can be found here: http://combatace.com/files/file/7387-canadair-cl-13b-mk6-sabre-late/ and here: http://combatace.com/files/file/7384-canadair-cl-13b-mk6-sabre-early/. Either one will do as they both have the F-86 Bomb Rack.
They are also both execllent planes and if you haven't flown them you are missing out on two of the best F-86 versions available at CA.
You must install the bomb rack as a weapon. The necessary lod's, ini's, weapon data entries and instructions are in ravenclaw_007's download.
You will need to ensure you have the necessary weapons, ie. AGM-12B, AIM-9B, Aero 7D_FFAR Pod, etc. Look in the *_loadout.ini files to see what weapons are needed. Most are found in common weapons packs or are already default weapons.
Included in this pack are the relevant .ini files to convert the FJ3M. Also included are an FJ-3B skin for VA-146, a real FJ-4B unit and two skins for the the F-86B/G models. VA-146 skin was created by me. The F-86 SEA skin was inspired by Dave's/Wrench's SEA F-86 skin.
Decals are, for the most part, default. They will depend on which SF1 install you put these planes in. You may end up changing some of the numbers.
Thanks to Dave "USAFMTL" Slavens for the idea. Years ago he created an FJ-4B fury from a FJ-3M. I found it at AVSIM while browsing the ancient Strike Fighters section.
Thanks to ravenclaw_007 for the F-86 Bomb Rack that makes the 'B models possible.
Thanks to Zur and column5 for the FJ-3M Fury.
And thanks to all those that have inspired and coached me to be able to do this.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
If you find any problems with this release, please PM me. If you improve it, please PM me a copy. Any questions, PM me.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
Geary
53 downloads
(1 review)0 comments
Updated
-
FJ-3M_Fury_Pack_1_for_SF1
By Geary
FJ-3M Fury Skins Pack 1 for SF1
You will need the columns5's FJ-3M Fury mod to Zur's F-86 Sabre for these skins here:
http://combatace.com/files/file/525-fj-3m-fury-addon/
Five FJ-3M Fury clean skins:
1 = VF84 - FJ-3M - Repaint of pappychksix/Wrench's VF-84 skin.
1 = VMF232 - FJ-3M - Semi-Fictional Repaint of David "USAFMTL" Slavens' FJ-4B DBF skin.
1 = VMF312- FJ-3M - Repaint of pappychksix/Wrench's VMF-312 skin.
1 = USN Blue Camo - Fictional - FJ-3M - Repaint of Mitch's F-86F_German skin.
1 = VMF122 - FJ-2 - Semi Fictional Repaint of VMF122 standalone skin I have but I don't know where I got it or who the original author is. If anyone know's whose skin this is, please tell me so I can credit them. VMF-122 actually used this skin on their FJ-3's. I wanted an FJ-2 Fury to compliment the Navy Blue Phantoms, Banshees, Skyraiders, etc. of the Korean War era. So I downgraded a FJ-3M to an FJ-2.
DECALS: These skins use a mixture of default and other Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Fury releases. PM me if you need help with these.
For the VF-84 and VMF-312 skins, use the decals from pappychksix's Fury Package here:
http://combatace.com/files/file/2255-fury-package/ ... OR ... Wrench's SF2 FJ-3M Package here: http://combatace.com/files/file/12233-fj-3m-fury-by-zur-and-co-for-sf2/
For the VMF232 skin I have NO idea where I got the decals to use for this skin. But probably from pappychksix/Wrench's Fury packs. Choose your own.
For the USN Blue Camo fictional skin, use which ever declas you like. I used TW default decals for my skin and probably some from pappychksix/Wrench's Fury packs.
For the VMF122 skin ... I have a stand alone VMF122 skin I repainted. I think I used the decals from this original skin. I used VMF232 numbers, but you can use whichever you wish. The problem is the original skin doesn't have a readme and I can't find where I got it from. Anyone who know's the original author please pm me where it can be found so I can post that information here.
These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt. To repaint some of these skins such as the VF-84, VMF232 and VMF312, I had to paint over the existing paint to eliminate the old panel lines and rivets. Unfortunately, this means I also painted over the great weathering on these skins. I apologize to the artists of the original skins.
They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format, 2048x2048 for SF1 but they might work in SF2 with a bit of tweaking. You can of course make them smaller if your computer can't handle the large size. If you have trouble making them smaller, pm me and I'll see what I can do.
There is included a clean drop tank skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked. Also a clean skin for the FJ-2 Navy Blue VMF-122 Tank-FJ2.
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your FJ-3M aircraft folder. If you want the blue FJ-2 VMF-122 drop tank, you will have to add the Weapondata entry to your install's weapondata.ini and run the weapon editor. Drop the Tank_FJ2.bmp and Tank_FJ2.lod into your weapons folder.
They were inspired by:
Dave
Wrench
pappychksix
column5
paulopanz
ravenclaw_007
Tazkiller
DanW
howling1
suhsjake
Mitch
Zur
and MANY others who've contributed skins and mods to this wonderful plane.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
Geary
52 downloads
(1 review)0 comments
Submitted
-
F-86_Sabre_Pack_1_for_SF1
By Geary
F-86 Sabre Skins Pack 1 for SF1
Four F-86 Sabre clean skins:
1 = 3-tone Desert Camo - Fictional
1 = 2-tone Desert Camo - Fictional
1 = 3-tone SEA Camo - Semi-Fictional
1 = Silver - Non-Fictional
These skins are fairly clean as I'm not very good at weathering so feel free to add your own dirt.
They were made using my F-86 Sabre/FJ-3 Fury templates. They are in .bmp format for SF1 but they might work in SF2 with a bit of tweaking.
They use a mixture of default and other Sabre/Fury skin decals. As I can't release other peoples decals without their consent, you will need to find some of the decals in other Sabre/Fury releases.
There is included a clean skin for those that wish to use it. Just drop it into your existing Tank_F86 weapons folder. Overwrite when asked.
INSTALLATION: Unzip to a folder/place of your choice. Copy, Move, Drag-n-Drop or do whatever you wish to get the skins folders into your F-86 aircraft folder.
They were inspired by:
Dave
Wrench
PappyChkSix
Column5
paulopanz
ravenclaw_007
Tazkiller
DanW
howling1
Zur
and MANY others who've contributed skins to this wonderful plane.
If I forget or miss anyone who deserves credit for anything I release, I apologize. I have no intent to abuse or misuse anyone's property or claim it as my own. Please contact me to correct any error.
I'm releasing this under the Combat Ace Fair Use Agreement. Use it anyway you wish for personal use. For any other use, please contact me first.
If you find any problems with this release, please PM me. If you improve it, please PM me a copy.
Geary
79 downloads
(3 reviews)0 comments
Submitted
-
F86F-FAP.rar
By adm17
F-86F in the colours of the strength aerea Portuguese.
The first hunting to reaccion Portugues, went the F-86, substitute to the old aeroplanes to piston, employ in the defence of the space aereo national and some of them used against the rebellious, in the African colonies.
Credits:
----------------------------------------------------------------------------------------------------------------------------------
F-86F en los colores de la fuerza aerea portuguesa.
El primer caza a reaccion Portugues, fue el F-86, sustituyo a los viejos aviones a piston, se empleo en la defensa del espacio aereo nacional y algunos de ellos se usaron contra los rebeldes, en las colonias africanas.
David Zurawski's for Sabre Package
David Slavens for Skin base
58 downloads
(0 reviews)0 comments
Submitted
-
Ohio Mike
By gumpy
This skin depicts the F-86E-10-NA Sabre 51-2824 flown by Captain James Robinson "Robbie" Risner.He flew with the 336th FS out of Kimpo AB Korea.He ended his tour with 8 kills and was the 12th highest ace of the Korean war.This skin was a hard one I could not find much information about it and was working off a couple of pictures I found in a old Squadron in action book that I thank them for.The rest is all my Potoshop work.I'm not at all sure about the artwork but it will have to do. Gumpy
171 downloads
(1 review)0 comments
Submitted
-
stud-HONEST JOHN
By gumpy
This skin depicts the F-86E-10 51-2747 stud-HONEST JOHN of Col Walker Mahurin (4th FG Deputy CO),Kimpo AB,Korea,December 1951.By now I us the template that I have Thrown together to use for my Photoshop work,if any one else sees their work I thank you and hope they approve.I made this skin as shinny as I could so have a good pair sun glasses ready.
159 downloads
(0 reviews)0 comments
Submitted
-
The Paper Tiger
By gumpy
This skin depicts Harold Fischer's F86 'The Paper Tiger',one of the few Sabres to have a shark mouth applied to it. Capt Fischer was assigned to the 39 FIS out of Suwon.Korea and ended the war with 10 confirmed Mig kills.I used the basic Silver Saber skin from Scandy's Skins which I thank them for and hope they approve and also a lot of my own Photoshop work it seems like it took forever to paint that shark mouth it's not the best but it is the best I could do. Gumpy
202 downloads
(0 reviews)0 comments
Submitted
-
"Mig Poison"
By gumpy
This skin depicts the F-86 "MIG POISON" flown by Maj James Hagerstrom,of the 67th FBG,out of Osan AB,in May of 1953.I used the basic Silver Saber skin I got from Scandy's Skins along time ago which I thank them for and hope they approve and also a lot of my own Photoshop work.
183 downloads
(0 reviews)0 comments
Submitted
-
Beautious Butch2
By gumpy
Joseph Christopher McConnell, Jr. was the top American ace during the Korean War.Captain McConnell shot down 16 Mikoyan-Gurevich MiG-15s while flying F-86 Sabres with the U.S. Air Force.McConnell was the first American triple jet-on-jet fighter ace and is still the top-scoring American jet ace.This skin depicts His Beautious Butch2 F-86 Saber during the Korean war.IT is a compulation of several different skins,and some of my own photoshop work. I think part of it is from MarcFighters I hope he doesnt mind,and I thank him,and if anybody else see's their work in the skin I thank you to.
142 downloads
(0 reviews)0 comments
Submitted
-
F-86K of 1/13 Artois, Armee de l'Air
By Muesli
Hi!
The French Artois squadron skin for the F-86K!
8 different numbers and serials, go fly!
Unzip and place file in the F-86K_late folder.
Muesli
PS: thanks to Matthew Ouelette for the original skin which I upgraded.
PPS: thanks to USAFMTL and the Sabre Team for this sweet bird.
127 downloads
(0 reviews)0 comments
Updated
-
F-86E(M) 2^ Aerobrigata -Italian Air Force-
By Spitwulf
F-86E(M) Italian Air Force - 2^ AeroBrigata Intercettori Diurni (2nd Daylight Interceptors Wing)
---skin for Sabre Mk4 mod by Wrench---
(Sabre Mk6: original model by Zurawski)
This skin represents the early camo, later replaced with a "bare metal" style.
Tested in SF1 Gold, WoV and WoE (pre and post Sept. 2008 patch)
Skin resolution: 1024x1024
Please, see the readme for installation instructions and other stuff.
Credits:
Templates by: Guest? Author unknow, but i have found the templates here, at CombatAce.
Someone knows who is the author? I want to give him proper credits. Thanks!
Thanks to:
Steve S: for its great support in my first attempt to make an historical skin. Grazie Steve!
Soulfreak: for the interesting link.
Erikgen: suggest on slats. (Sorry, forgotten in my previous readme...)
Column5: for the decal tutorial in Knowledge Base section
All the italian section at Combat Ace forum. Thank for the support!
Wrench: for Sabre Mk4 mod.
Zurawski: for its outstandings Sabres.
Legal:
This skin is release under Freeware Licensing aka Fair User Terms. Simply 3 rules:
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
For more informations, check this topics: http://forum.combatace.com/index.php?showtopic=26131
One more time: sorry for my English...
Spitwulf
Somewhere in North Sardinia, Italy
October 2008
160 downloads
(0 reviews)0 comments
Submitted
-
F-86E(M) 4^ Aerobrigata -Italian Air Force-
By Spitwulf
F-86E(M) Italian Air Force - 4^ AeroBrigata Intercettori Diurni (4th Daylight Interceptors Wing)
---skin for Sabre Mk4 mod by Wrench---
(Sabre Mk6: original model by Zurawski)
This skin represents the early camo, later replaced with a "bare metal" style.
Tested in SF1 Gold, WoV and WoE (pre and post Sept. 2008 patch)
Skin resolution: 1024x1024
Please, see the readme for installation instructions and other stuff.
Credits:
Templates by: Guest? Author unknow, but i have found the templates here, at CombatAce.
Someone knows who is the author? I want to give him proper credits. Thanks!
Thanks to:
Steve S: for its great support in my first attempt to make an historical skin. Grazie Steve!
Soulfreak: for the interesting link.
Column5: for the decal tutorial in Knowledge Base section
All the italian section at Combat Ace forum. Thank for the support!
Wrench: for Sabre Mk4 mod.
Zurawski: for its outstandings Sabres.
Legal:
This skin is release under Freeware Licensing aka Fair User Terms. Simply 3 rules:
1. The work may not be used in payware projects or in projects that will not be freely distributed under these same terms.
2. You must give proper credit in your readme file.
3. If feasible, include the original readme along with your new mod.
For more informations, check this topics: http://forum.combatace.com/index.php?showtopic=26131
P.S. sorry for my English...is very poor...
Spitwulf
Somewhere in North Sardinia, Italy
October 2008
148 downloads
-
Resized Skins For GMG CL-13B Mk6 Sabres
By Dave
For those who have trouble running 2048 size skins, here they are resized to 512.
Sabres are found here
Late MK6 Sabres
Early Mk6 Sabres
83 downloads
(0 reviews)0 comments
Submitted
-
F-86K upgrade
By suhsjake
A general upgrade for the F-86K featuring a new skin, hole textures, and modified FM.
Zur, Bunyap & Team ~ For the F-86K
Column5.us ~ For Hosting
bobrock ~ For his F-86D template
258 downloads
(2 reviews)0 comments
Submitted
-
Dhimari 8th, 10th, 45th Skin Updates
By suhsjake
In cooperation with WhiteKnight06604, I have updated his recently relased skins 8th Fighter Squadron, 10th Fighter Squadron 'Vultures', and 45th Fighter Squadron 'Scorpion'.
You need the Original Files
8th
http://forum.combatace.com/index.php?autom...p;showfile=4721
10th
http://forum.combatace.com/index.php?autom...p;showfile=4722
45th
http://forum.combatace.com/index.php?autom...p;showfile=4731
Jake
98 downloads
(1 review)0 comments
Updated
-
Royal Danish Air Force F-86D Esk 726
By hgbn
Just unpack and drop it in your F-86D Folder and fly, if you want guns drop it in the F-86K folder instead, this will not be as in the real world,
since Royal Danish Air Force did not have the F-86K, but it is more fun that way.
This aircraft is from Royal Danish Air Force Eskadrille 726 based at AFB Aalborg from 1959 to 1965 where they tranferred to F-104G
Thanks to USAFMTL for the templates I used
Have fun
hgbn
122 downloads
(0 reviews)0 comments
Updated
-
F-86F-40, 461st FDS, USAFE
By Wrench
F-86F-40 Sabre, 461st FDS, USAFE skin for SF/WoV/WoE
Just a simple, natural metal skin for Zur's Sabre as used by the 461st Fighter Day Squadron (ex-527th FBS) after the experiment with camoflague ended, and the aircraft were transfered to the new unit. Timeframe is approx 1956-58-ish.
Included are new serial and buzz number decals. The Black Bar/Diamonds is borrowed from USAFMTLs camo version for the 527th. The serial numbers are actual F-86F serials, but I claim no historical accuracy if they were used by this squadron.
See the enclosed readme for super easy install instructions (for a change!)
Happy Landings!
Wrench
kevin stein
282 downloads
(2 reviews)0 comments
Submitted
-
Maj.John Glenn's Mig Mad Marine
By gumpy
This is a skin of Maj.John Glenn's Mig Mad Marine F-86F Saber as seen in the skies of War torn Korea.It is a compulation of several differnt skins,and my own photoshop work.I thank everybody who made this skin possible,and hope you all enjoy it.
310 downloads
(2 reviews)0 comments
Submitted
-
334 Skvadron, Royal Norwegian AF
By suhsjake
334 Skvadron in the late 50's and early 60's.
119 downloads
(1 review)0 comments
Submitted
-
Netherlands Air Force F-86K 700 squadron
By bobrock
Koninklijke Luchtmacht - F-86K Kaasjager
This skin is based on the plane Q-283 from 700 squadron, now gate guardian at Twenthe AFB.
160 downloads
(1 review)0 comments
Submitted
-
F-86K Italian Air Force 51 Stormo
By bobrock
This skin is based on the plane (51-62) on display at Vigna di Valle museum near Rome.
Included in this skin are 51-01/3/21/50/56/60/62/72, which are the ones I've been able to find the corresponding tail number.
216 downloads
(3 reviews)0 comments
Submitted
-
112 Sqdn RAF Sabre skin
By Wrench
Canadair CL-13 Sabre (RAF Sabre Mk.4) 112 Squadron skin set
For SF, WoV & WoE Cold War installs
What we have here is a skin representing RAF 112 Squadron, circa 1954-ish when they were equipped with the Canadair-built Sabres. They only used them for a short time, while awaiting the arrival of the new Hawker Hunter or Supermarine Swift.
This skin set is particularly designed to add on to the RAF Sabre 4 mod I released some time ago, but can be used on any of the Canadair Sabres by Zur and Co.
You'll also find another folder "misc-cockpit stuff" that has an updated cockpit ini and new gunsight tgas for use on the aforementioned RAF Sabre 4 mod. The cockpit ini also incorporates the fix for the EGT gauge.
Good Hunting!
Wrench
Kevin Stein
128 downloads
(2 reviews)0 comments
Updated
-
F-86D/K Sabre Alaska ANG
By suhsjake
A fictional Alaska Air National Guard Skin. Thought I would release it
Thanks to
The Sabre Dog Team
USAFMTL
Sundowner
Jake
171 downloads
(1 review)0 comments
Updated
-
(1 review)0 comments
Updated
-
Fury Package
By pappychksix
Here are 4 more Furys for you flying enjoyment. Included is VF-73, VF-142, VF-84 and VF-312. These will be the last I do as I just wanted some Furys in my collection.
Hope you enjoy, Pappy
Note: The decals for VMF-312 are for an FJ-2. You will need to change them to FJ-3M if you are going to use them in that file.
428 downloads
(0 reviews)0 comments
Updated
Sign in to follow this
Followers
0