P-26 Peashooter, Chinese Air Force, mod for SF/WoV/WoE WW2 PTO installs



== For Pre-Patch (9/08-10/08) Installs -ONLY!!! ==


 
This is a slight rebuild, in a major sense, of Bunyap's P-26 Peashooter, as used by the Chinese Air Force in the late 1930s. It is a complete aircraft mod, with all the bits needed to just unzip, install and fly away.
 
It is a 'nation-specific' aircraft, and will not conflict with any other versions of P-26 you may have in your game installs.
 
There are 2 version of the data ini included with this; one (called ori-P-26A_DATA.ini) is the original as issued (with my lighting modifications as seen in a few other Peashooter mods). The other, set to use right now, has had it's FM parameters 'adjusted' to something that seems a LOT closer to how the aircraft should be (More in the "Notes" section below). Lighting is the same for both.
 
Brand new, "only-available-in-this-mod" nation specific Hangar and Loading screens are included.
 
A new 'natural metal' skin, based on Bunyap's templates, and new ID number decals for 18 aircraft are also included. The cockpit, created by CA_Stary is included. The only mod to his pit is a I added my 'ring-and-bead' gunsight (nestled quite comfortably inside the telescope tube).
 
Full, detailed instructions are below in the "To Installate" section. Along with the usual notes, comments and general foolishness....
 
--YOU MUST HAVE THE BUNYAP WEAPONS PACK TO GET THE WW2 WEAPONS!! --
- This mod is designed to work ONLY in pre/unpatched installs -those that pre-date the 9/08 & 10/08 units. If you install this mod to a post-patched game install, you do so at your own risk. Prop Flight Models are still a little "iffy" Post-Patch, and it is NOT reccomended you use this as such. -
 
As you'd expect, there's a fully detailed readme enclosed with all the necessary instructions for installing and so forth.
 
Good Hunting!
Wrench
Kevin stein

Curtiss Hawk III, Chinese Air Force, mod for SF/WoV/WoE WW2 PTO installs
 
== -For Pre-Patch (9/08-10/08) Installs -ONLY!!!- ==


 
This is a major rebuild of MontyCZ's Curtiss Hawk III (Export Version), as used by the Chinese Air Force in the late 1930s. It is a complete aircraft mod, with all the bits needed to just unzip, install and fly away.
 
It is a 'nation-specific' aircraft, and will not conflict with any other versions of the BF2C/Hawk III you may have in your game installs. In fact, as a 'new' aircraft, it'll replace any other version made from the original BF2C.
 
There is a completly NEW data ini, with updated FM parameters taken from a 'contemporary' aircraft - I disremember which one, but do remember it was biplane. As this mod was started early in 2008, I kinda lost track....
 
A new skin, based off the original but from a newly made template (by me!), and ID number decals for 24 aircraft is included. The cockpit, CA_Stary's Peashooter pit, is also included. It's not perfect, but it's mighty damn close, and works really well for this aircraft. The only mod to this pit is a I added my 'ring-and-bead' gunsight (nestled quite comfortably inside the telescope tube).
 
Full, detailed instructions are below in the "To Installate" section. Along with the usual notes, comments and general foolishness....
 
--YOU MUST HAVE THE BUNYAP WEAPONS PACK TO GET THE WW2 WEAPONS!! --
- This mod is designed to work ONLY in pre/unpatched installs -those that pre-date the 9/08 & 10/08 units. If you install this mod to a post-patched game install, you do so at your own risk. Prop Flight Models are still a little "iffy" Post-Patch, and it is NOT reccomended you use this as such, in those types of install. -
 
As usual, there's the informative "readme" enclosed with instructions, comments, statements, etc, etc, etc, designed to speed you on your way to installing and enjoying the mod. Do read it....
 
Happy Landings!
Wrench
kevin stein

Bell P-400 "Airacobra", 39th FS Skin and Ini Pak, For SF/WoV/WoE PTO installs
 
This is a semi-complete mod, re-creating the P-400, export version of the Bell P-39 "Airacobra". The skin represents aircraft from the 39th FS, 35th FG as seen around Port Morseby, PNG during mid-1942
 
It is also to be considered a FULL replacement, minus certain files, for the P-400 mod that's been on my site for several years. This version gets a fully upgraded skin, with newly redrawn panel and rivet lines, and a replacement cockpit, based on the Dev A-Team's Hurricane.
 
When I say "semi-complete", this means the aircraft LOD file is NOT included, NOR are the cockpit files from the Hurricane 1. You WILL be transfering these from their respective aircraft. Needless to say, you MUST have Wolf's WW2 Planes Pak for the LOD, and the DATs Hurri. Full instructions, and a parts list, are below in the "Install Instructions".
 
I've supplied all the inis, misc bmps and tgas and various and sundry bits to make the process as easy as possible.
 
The skin, as said above, is for the 39th FS, and has completely new redrawn panel and rivet lines. Aircraft ID numbers are as accurate as possible, based on research. Serial numbers are NOT used, as these were painted out in-theatre. In reality, although not painted on the aircraft, these birds were assigned RAF serials, as they were originally intented for the UK.
 
A revamped, cleaned up version of my original P-39 Hangar Screen is included, as is the damage tga.
 
-= NOTE: you must have the Bunyap Weapons Pak of 6/06 to get the WW2 weapons and guns and such =-
- This mod has been tested in SF, WoV and WoE. This mod is NOT reccomended for use in a WW2 PTO style install of WoI, as it handles prop flight models in "a most unusual, and odd way"
 
Good Hunting!
Wrench
Kevin Stein
 
ps: this is another one of those that somehow slipped under the radar...I'd simple forgotten to upload it here after finishing it!

F4U-1A "Corsair" mod for SF/WoV/WoE WW2 PTO installs
 
This package is a simple mod to the existing F4U-1 created by Wolf257. It will create a NEW aircraft, the F4U-1A, which the aircraft really is. This will differentiate the "F4U-1 Birdcage" mod of mine from each other.
 
The package contains ALL the necessary files to create the aircraft; various inis, etc, EXCEPT the aircraft LOD (the physical model) a NEW skin from my enhanced template, representing VF-17 "Jolly Rogers. I'm really surprised NO one has done this skin before!!! Individual 'plane in group' numbers, BuNums are incuded for 36 aircraft. Unfortunately, the 'tail art' is not. See "Notes and General Nonsense" below for explinations
A new Jolly Roger's themed loading screen is also included, as is the damage tga, a new gunsight tga, and my original Corsair Hangar Screen.
 
Full, detailed instructions are below in the "To Installate" section.
 
--YOU MUST HAVE THE BUNYAP WEAPONS PACK TO GET THE WW2 WEAPONS!! --
--- YOU MUST HAVE WOLF'S ORIGINAL F4U-1 INSTALLED FOR THE LOD!!! ---
 
This aircraft has been tested in SF/WoV/WoE and post-patch WoI (8/29/08). There still are some 'issues' with prop-plane flight models in WoI, but there has been a MARKED improvement!! You use it in WoI at YOUR own risk.
 
Yup, another highly detailified, step-by-step readme for you all to enjoy is included...aren't you glad I write these things?
 
Happy Hunting, You Pirates of the South Pacific!!
Wrench
Kevin Stein
 
-------------------------------------
oopsy Edit: 15 minutes later...I realized I'd forgotten to add the correct 'wings.bmp' to the /cockpit folder. This has been corrected. Sorry for the inconvience! Please continue what you were doing...
W

F4U-1 "Corsair" Birdcage mod for SF/WoV/WoE WW2 PTO installs
 
This package is a simple mod to the existing F4U-1 created by Wolf257. It will create a NEW aircraft, a 'stand in' F4U-1 'Birdcage' Corsair. You will also be making changes to your EXISTING F4U-1, with some simple file renaming to create the F4U-1A, which the aircraft really is. This will differentiate them from each other.
 
The package contains ONLY the necessary files to create the aircraft; various inis, etc, and a NEW skin from my enhanced template, representing VMF-124, the first American unit to take the Corsair into action in Feburary, 1943.
 
You MUST have Wolf's original F4U-1 to create the full aircraft from. The aircraft LOD (physical model) is NOT included!!! The cockpit folder IS included, as I made some changes in the 'viewed' wing, so rather than have the end users make a mistake with the 'wing.bmp', I choose to include the full folder. A "slightly" enhanced dash bmp is included, just for fun.
The damage tga and a NEW -only available in this mod- Birdcage Corsair Hangar screen are also included!
 
Full, detailed instructions are below in the "To Installate" section.
 
--YOU MUST HAVE THE BUNYAP WEAPONS PACK TO GET THE WW2 WEAPONS!! --
--- YOU MUST HAVE WOLF'S ORIGINAL F4U-1 INSTALLED FOR THE AIRCRAFT LOD!!! ---
 
This aircraft has been tested in SF/WoV/WoE and post-patch WoI (8/29/08). There still are some 'issues' with prop-plane flight models, but there has been a MARKED improvement!! You use it in WoI at YOUR own risk.
 
As mentioned above, there's (yet another!) detailed readme enclosed -- so I require you to read the thing!! Notes, explinations, blah, blah, etc, and so forth.
 
Good Luck, Good Hunting! and Happy Landings and all that sort of stuff..
Wrench
Kevin Stein

Grumman TBF-1 Avenger -- A Mod of the Dev A-Team's TBF-1C
 
This is a mod of the DAT's TBM-1C Avenger of WW2 fame, into an early war version, circa 1942
 
This is to be considered as an "incomplete" aircraft mod, due to the non-inclusion of certain files. I've NOT included the aircraft LOD file nor the cockpit folder. See below "To Install" for a complete list of the necessary parts.
You -MUST- have the DAT's TBF-1C to make use of this aircraft, as you'll be coping files over from it.
 
The new skin, from a completly redrawn template based on Gramps' original skins, represents VT-3 based aboard USS Saratoga (CV-3) circa August/September 1942, approximately the time of the Battle of Santa Cruz and the fight for Guadalcanal. All the panel and rivet lines have been redone, new decals created for 'plane in group numbers', aircraft designation, and BuNums for 24 aircraft. It can also be considered a rather 'generic' USN/USMC version, as most units carried no markings. Some USMC VMSB units DID use a 3-digit ID number, based upon the aircrafted BuNum, but that's a story for another day...
 
I've included all the inis I've modified, so you'll be copying the minimum number of bits. The data ini includes mods that remove the wing guns, and adds the single 30 caliber MG on the nose. Unfortunatley, the LOD still contains the postions of the 2 wing mounted 50 cals, so you'll have to suspend disbelief (or pretend they're broom handles stuck there to fool enemy fighters that they're real guns)
Surface search radar has also been activated. NEW damage tgs's have also been created (they can be used on any of the TBF/TBMs).
 
= IMPORTANT: This aircraft is designed for use in SF/WoV/WoE -ONLY-, I have NOT tested it in post -8/28/08- patch WoI =
 
=This mod is designed for use with the Bunyap Weapons Pak of 6/06, as it contains all the needed weapons . If attempting to use this aircraft with any other weapons pak, you'll need to add ALL the WW2 era bombs, torpedoes, etc. They are NOT included in this package.=
 
As you probably suspect, there's a highly detailed, step-by-step readme included, so you'd be wise to read it!!! And as always, the usual notes and comments and general nonsense....
 
Happy Hunting!
Wrench
Kevin Stein

Kawanishi N1K1 Kyofu "Rex"
 
Full Aircraft Replacement Pak
 
This is Pasko's N1K1 Rex, the complete package. As the link is broked at his site, and it's dosn't seem availalbe to the General Masses ™, I've chosen to upload the entire aircraft, WITH my Update Pak already installed.
Please consider this as a REPLACEMENT and enchacement of the Pak I uploaded yesturday.
 
As stated, this IS the complete aircraft, lods, skins, inis, and cockpit (which comes from AD's Zero). This will simplify matters releated to installing it.
 
-= NOTE: You MUST have the Bunyap Weapons Pak of 6/06 to get the WW2 weapons and guns and such =-
 
- This mod has been tested in SF, WoV and WoE. This mod is NOT reccomended for use in a WW2 style install of WoI, as it handles prop flight models in "an odd way".
 
As usual, read the enclosed 'readme' for (for once!!!) simple install instructions!! BTW, as this is the complete aircraft, there are 2 readmes -- Pasko's original and the one for my update pak, but you can disregard it
 
With deep thanks to Pasko for creating this aircraft for us, and all those that worked on it!
 
Enjoy!
Wrench
kevin stein

DATA,INI,LOADOUT for the KI-61 family (KI-61-Ia -Ib -IIa -IIb and mauser 20mm gun) and some bonus loading pictures and hangar
 
a variant of
 
Tony fighter. Developed for SFP1 by the SFP1 Dev A-Team of Capun (model), CB Productions (textures), Charles (FM and screens) and Kesselbrut (Virtual Cockpit) WRENCH (textures). Developed from Razer's source file
 
you need the complete KI-61 aircraft from
 
 
http://cplengineeringllc.com/SFP1/