SF2 DAT Mods

Republic F-84G Thunderjet skins in USAF Thunderbird markings used in 1953 and 1954 before replacing these jets with the swept wing F-84F Thunderstreak. This is NOT a complete airplane. It needs the LOD's supplied by A-Team Skunkworks available at his website:
http://cplengineeringllc.com/SFP1/

Hope you enjoy,
Pappy

52 downloads

(0 reviews)

0 comments

Updated January 13

Northrop F-5E/N "aggressor" double pack (*)

F-5E - The F-5 was also adopted as an opposing forces (OPFOR) "aggressor"
           for dissimilar training role because of its small size and performance
            similarities to the Soviet MiG-21.
            The F-5E served with the US Air Force from 1975 until 1990, in the 64th
            Aggressor Squadron and 65th Aggressor Squadron at Nellis Air Force Base
            in Nevada, and with the 527th Aggressor Squadron at RAF Alconbury in
            the UK and the 26th Aggressor Squadron at Clark Air Force Base in the
            Philippines.
F-5N - Ex-Swiss Air Force F-5Es used by the US Navy as an "aggressor"
            aircraft, with AN/APG-69 replacing the original AN/APQ-159.
            Intended to replace high-time USN/USMC F-5Es in the adversary
            role, and saw service through 2015.
WHAT'S IN:

F-5E USAF 65th Aggressor Squadron (4 skins and decals)
F-5N USN VFC-111 "Sun Downers" (4 skins and decals)
CREDITS:
- A-TEAM/Capun: model
- Pappychecksix: Blank Skins
- paulopanz: decals, screens etc.
INSTALL:
- (*) you need F-5E-R0c.LOD file from A-TEAM model fix forum (this is the debugged lod)
- put it inside F-5 AGG and F-5N folder
NOTE:
- canopy open 10 key
- as I hate textures with serials painted on, I have to thank very much the great Pete, who made these great blank skins I could use to add historical serial numbers and codes. Let's make more aggressor squadrons skins Pappy! Hurry on.
Enjoy
Paolo & Pete

126 downloads

(1 review)

3 comments

Submitted May 27, 2023

Martin P5M-2 Marlin (*)

Built as a successor to the PBM Mariner, it had better engines,
an improved hull, and a single vertical fin tail.
The P5M-1 was followed by 116 P5M-2 planes. These had a T-tail
to put the tail surfaces out of the spray, an AN/ASQ-8 MAD boom
at the rear of the tail-tip, no tail guns (the gun position replaced by
he antenna for the AN/APN-122 Doppler Navigation Set), better
crew accommodation, and an improved bow to reduce spray during
takeoff and landing.
WHAT'S IN:
- 30 Skins (27 USN; 1 USCG; 2 MN)
- decals / serial historical numbers by Squadron
- loadout.tga image
CREDITS:
- A-TEAM original model
- pappychksix original skins
- paulopanz edited & new skins; decals, loadout.tga. ini edits
TO INSTALL:
- (*) you need P5M-R0c.lod from original A-TEAM Beta package or if you use the P5M-R1.lod from modern planes section you have to change P5M.ini like this:
[LOD001]
Filename=P5M-R1.LOD
Distance=100
[LOD002]
Filename=P5M-R1.LOD
Distance=250
[LOD003]
Filename=P5M-R1.LOD
Distance=500
[LOD004]
Filename=P5M-R1.LOD
Distance=2000
[LOD005]
Filename=P5M-R1.LOD
Distance=15000
- put it inside AIRCRAFT/P5M folder
- put all the new package in your SF-2 folder
NOTES:
I made this pack because I love this plane and hate texture painted
serial numbers.
The model I used is a beta and has some easy to fix mapping bugs (I could show),
that I tried to mask as better I can, because as many others - I fear - it'll not be ever fixed.
The realise lod has the same problems (unfixed bugs) as the beta so you can use both.
Enjoy
@ paulopanz

100 downloads

(0 reviews)

Updated April 16, 2023

F-5E USAF Aggressor Skins

USAF Aggressor skins for Capun's F-5E. 4 skins included. Read me included.
Hope you guys enjoy,
Pappy

64 downloads

(1 review)

0 comments

Submitted May 3, 2023

F-5E USN Adversary Skins

USN VFC-111 SunDowner's skins for Capun's F-5E. 4 skins included. Read me included.
Hope you guys enjoy,
Pappy

80 downloads

(2 reviews)

0 comments

Submitted April 27, 2023

S-2F RCAF Skin pack (CP-121) + layered template

By 1977Frenchie

To be used on SF2 S-2F Tracker by the Dev A-Team
You will get the following skins in this package :
Reworked :
CANA
New :
RCAF 1970
RCAF 1980
RCAF 1990

Installation:
Copy the current pack objects/aircraft folder in your game S-2F aircraft folder.
Copy the current pack objects/decals folder in your game S-2F decals folder.
Copy the S-2F.ini and S-2F_DATA.ini to the game S-2F aircraft folder.
On the original skin (reworked one), i only did minor corrections so all credits goes to the original persons.
For the reworked one's, all done by me.
RCAF serials and plane numbers are real one's and changes have been made to them to reflect the S-2F to CP-121 modex when change occured.
Note on RCAF skins:
I did not do the 2 other ''first scheme'' and the alternate 1980 one as i did not find it relevant and they were short lived too.
Credits:
Thanks to Thirdwire for creating the Strike Fighters series.
Thanks to those involved in the original aircraft.
Me for the redraw of the panel lines and paint work + new skins :).
Happy flights!
Mario C.
Frenchie1977

113 downloads

(0 reviews)

Updated June 1, 2018

Fairey Gannet AS Mk.I AURI

By strahi

Fairey Gannet AS Mk.I Indonesia, skin for model from A-Team Skunkworks.

48 downloads

(1 review)

0 comments

Submitted March 15, 2023

Hawker Sea Fury FAR skin pack

By strahi

This is a another Skin pack for A-Team model. I wish you good hunting. Relax and try to enjoy, thank you.

34 downloads

(0 reviews)

Updated March 12, 2023

Westland Lynx HAS2 & HAS3 for Strike Fighters 2 Series

By dtmdragon

Westland Lynx HAS2 & HAS3 for Strike Fighters 2 Series

I have taken the Westland Lynx that was updated for SF2 in the Falklands campaign and packaged it up for SF2.

Included is:

-Lynx HAS2
-Lynx HAS3
-Required weapons

I made a few changes including:

-Working search radar
-Low vis grey skin for the HAS3
-Antarctic Service skin for the HAS3
-Forward firing door gunner that can be added/removed via an extra weapons station
-Countermeasures for the HAS3

****The speed brake key opens and closes the cabin doors

Instillation:

-Step 1 Put files into appropriate folders, override when asked.

-Step 2 get the following lod files from the Lynx HAS2 at http://combatace.com...-falklands-mod/ or at http://cplengineeringllc.com/SFP1/

Lynx-HAS2-R0e.LOD
Lynx-HAS2-R1.LOD
Lynx-HAS2-R1-MR50.LOD
Lynx-HAS2-R1-MR60.LOD
Lynx-HAS2-R1-MR80.LOD

Copy and past them into the Lynx_HAS2 and Lynx_HAS3 main folders now in your aircraft mods directory.

Note: has been tested in an all titles merged game but should work fine an any stand alone title

Credit goes to: eburger68, Kesselbrut, Dave and the DevATeam who gave thier permission for this mod.

824 downloads

(3 reviews)

2 comments

Updated January 16, 2023

Boeing MH-47G SOA Chinook

Notes:

This is not actually a MH-47G SOA Chinook, but a standard base model Chinook. It's the only one we have in SF2 so it will have to do.

The MH-47G Special Operations Aviation (SOA) version is currently being delivered to the US Army. It is similar to the MH-47E, but features a more sophisticated avionics including a digital Common Avionics Architecture System (CAAS). The CAAS is common glass cockpit used by different helicopters such as MH-60K/Ls, CH-53E/Ks, and ARH-70As.

Like the Hawks, she is relatively easy to fly on "normal" mode, which SF helicopters are tuned for. You can hover, fly backwards and sideways, ascend verticaly etc. It takes some practice and skill but is definately doable. Pinnacle landings are hard but can be done. You get what you put in, so if you practice you will be rewarded.

She is armed with a pair of player operated 7.62mm miniguns.

US Army Rangers can be deployed from the rear of the bird. A nice feature is that they will "run" down the ramp and deploy onto the ground (using a "crater" effect). Be careful when selecting the Rangers to deploy as many of the MH-47's parts are "fake" weapons and therefore can be "fired".

The bird has a full set of lights, including landing lights and a searchlight which are activated/deactivated by the "L" landing key.

Included are two real Chinook wav files, you can pick which one you like. Listen to them IN GAME, as the game plays them correctly whereas the likes of Windows Media Player does not.

Another nice effect is that if your bird is destroyed a nice Chinook wreck will be your funeral pyre!

INSTALLATION:

Place the MH-47G folder into your Aircraft folder.
Place the CH-47EA-Dam.bmp and MH-47G-Destroyed.LOD into your Aircraft folder.

Place the 160MiniGun, 47R, 47Tank2, 47Winch, 160HeloGunnerR and US Ranger folders into your Weapons folder.

Place the 160HeloPilot1 & 2, 47A, 47Boom, 47Cargo, 47CM, 47FLIR, 47J, 47M, 47M2, 47RN, 47S, and 47W2 folders into your Pilots folder.

Place the Chinook and Chinook4 wav files into your Sounds folder.

Place the two TADS files and the Loading wav file in your Flight folder.

And finally, place the contents of the Object folder (RangerCrater001, USForces and Wreckobject.ini) into your main Objects folder. These are the "craters" that will show the Rangers on the ground once deployed. NOTE: The new "crater" is WreckType008, if you already have a WreckType with this number, just paste mine in and rename them as required.

You will need to copy over the CH-147-R0g.LOD from the A-Team Chinook mod. If you do not already have it, get it from the A-Team Skunkworks site.

CREDITS (a LONG list of contributors):

A-Team for Chinook Mod. Note my skin is best possible with current model limitations. It is a generic SOA Chinook from the 160th Special Operations Aviation Regiment.

Dave "Zur" Zurawski for the glass CAAS cockpit. Thanks Dave for the permission.

My good friend Florian "AmokFloo" Schneider for the new US Army Ranger model and freight palette. Thanks buddy!

Thanks also to the following:

The BANIDOS TEAM for the most excellent damaged Chinook.

Kevin "Wrench" Stein for Hangar/Loading Screens I used as a base.

Daniel "Kesselbrut" Himmel for Helo Pilots and Helo Gunner on which I based the 160 pilots and gunner.

Dels for the C-130J tanks.

FastCargo for the Paveknife pod and TSS FLIR pod.

Wingwiner for the THC Cluster Rocket.

Ravenclaw_007 for the flare/chaff launchers.

Dmtdragon for the flare/chaff positions etc.

Tracker for the GRUA_Alouette.

331KillerBee for the M134 Minigun, Ac-123K CBU, A4Q antenna, Flashbox, Mk7 Depth charge, LAU-32, and XM-8.

Anyone else I have missed, apologies.

Thanks to all.

1,068 downloads

(6 reviews)

4 comments

Updated January 16, 2023

de Havilland Vampire F.3 (*)

single-seat fighter for the RAF. Two prototypes converted from F.1s;
224 were built, 20 were exported to Norway, and 150 to Canada for the Royal Canadian Air Force.
Mexico had 55 ex RAF nicknamed Aguacate ("avocado") due to colour and shape.
WHAT'S IN:
- 16 new skins
- historical decals/serial numbers
- some ini/tga tweaking
CREDITS:
- plane model A-TEAM
- skin & decal works paulopanz
TO INSTALL:
- grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder
- all in your main mod folder and overwrite

44 downloads

(0 reviews)

0 comments

Submitted December 28, 2022

de Havilland Vampire F.1 (*)

single-seat fighter version for the RAF; Three prototypes (named Spider Crab) built for specification E.6/41.
228 production aircraft built, including 70 for Sweden as the J 28A.
30 ex-RAF F.1s were transferred to the Armee de l'Air in 1948 for familiarization.
In 1946, the Swiss Air Force purchased an initial four Vampire F.1.
TG431 was supplied to Royal Australian Air Force (RAAF) as A78-1 in May 1947 for familiarization.
TG372 to Royal Canadian Air Force (RCAF) on an evaluation basis.
The Dominican Air Force purchased 25 of Sweden's Vampires in 1952.
WHAT'S IN:
- 20 new skins
- historical decals/serial numbers
- some ini/tga tweaking
CREDITS:
- plane model A-TEAM
- skin & decal works paulopanz
TO INSTALL:
- grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder
- all in your main mod folder and overwrite
NOTE:
This plane hasn't fuel tanks but a sub version with fuel tanks should be very wellcome
as there are some evidence about their use mostly from Sweden and Swiss AF.
The tanks textures are already included.

40 downloads

(0 reviews)

0 comments

Submitted December 28, 2022

de Havilland Vampire F.30 (*)

Nene-powered single-seat fighter-bomber for the Royal Australian Air Force;
57 built in Australia by the De Havilland Australia (DHA)
WHAT'S IN:
- 2 new skins
- historical decals/serial numbers
- some ini/tga tweaking
CREDITS:
- plane model A-TEAM
- skin & decal works paulopanz
TO INSTALL:
- grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder
- all in your main mod folder and overwrite

35 downloads

(0 reviews)

0 comments

Submitted December 28, 2022

de Havilland Vampire FB.31 (*)

Nene-powered upgraded F.30, 28 F.30s converted and 23 built new by De Havilland Australia.
WHAT'S IN:
- 4 new skins
- historical decals/serial numbers
- some ini/tga tweaking
CREDITS:
- plane model A-TEAM
- skin & decal works paulopanz
TO INSTALL:
- grab (*) proper lod file from A-TEAM site and put inside aircraft/vampire1 folder
- all in your main mod folder and overwrite

32 downloads

(0 reviews)

0 comments

Submitted December 28, 2022

Vickers Valiant B.1 (*)

The Vickers Valiant was a British high-altitude jet bomber designed to carry nuclear weapons, and in the 1950s and 1960s was part of the Royal Air Force's "V bomber" strategic deterrent force. It was developed by Vickers-Armstrongs in response to Specification B.35/46 issued by the Air Ministry for a nuclear-armed jet-powered bomber. The Valiant was the first of the V bombers to become operational, and was followed by the Handley Page Victor and the Avro Vulcan. The Valiant was the only V bomber to have dropped live nuclear weapons (for test purposes)
All the 11 Squadrons that used the Valiant
(included the 4 Suez ones) with historical
numbers (Those from suez with note
for campaign numbers to choose).
What's new:
- SF-2 porting
- 24 Skins edited and resized
- New decals
- New historical decal numbers by squadron
- Decals positions fixed
- New loadout image
References:
- Warpaint n. 63
- Scale Aircraft Modelling - vol.25 n. 5
- Vickers Valiant - Aerofax
- Osprey Combat Aircraft n. 95

All credits to A-TEAM for model and base skins I edited & upgraded.

(*) You need Valiant-B1-R3d (new) lod from A-TEAM site.

One community, more planes, so much fun.

@ paulopanz

123 downloads

(0 reviews)

3 comments

Updated March 4, 2022

Sikorsky MH-60L Direct Action Penetrator

Notes:

There are two helo's in this package. One is the DAP, and the other, well you'll just have to see.

Not really a MH-60L Direct Action Penetrator, but of course a MH-60G Pave Hawk. It's the closest we have in SF so it will have to do.

This bird packs an awesome punch: eight Hellfire's, four Stingers, a rocket pod and two 7.62mm Miniguns. Something for everyone!

As with all the Hawks, she is relatively easy to fly on "normal" mode, which SF helicopters are tuned for. You can hover, fly backwards and sideways, ascend verticaly etc. It takes some practice and skill but is definately doable. This bird is a bit heavier than the other Hawks so takes more skill to hover.

Installation:

Place the MH-60LDAP folder into your Aircraft folder.

Place the 160HeloGunnerR, 160MiniGun and Hellfire_PodN into your Weapons folder.

Place the 160HeloPilot1 & 2, and DAPR folders into your Pilots folder.

Place the MH60LDAP wav file into your Sounds folder.

Place the two TADS files and the Loading wav file in your Flight folder.

You will need to copy over the MH-60G LOD's from the MH-60G Pave Hawk mod. If you do not already have it, get it from the A-Team Skunkworks site.

Credits:

A-Team for MH-60G Pave Hawk Mod. Note my skin is best possible with current model limitations. It is a generic DAP from the 160th Special Operations Aviation Regiment.
Kesselbrut for MH-60G Cockpit.
Wrench for Hangar/Loading Screens I used as a base.
Kesselbrut (? - they're the same model as in the pit, so I assume they're his)) for Helo Pilots and Helo Gunner on which I based the 160th pilots and gunner.
331KillerBee for the LAU-3 which became the DAP's nose radar, and for the Hellfire Pod and M134 Minigun.

Anyone else I have missed, apologies.

Thanks to all.

1,023 downloads

(4 reviews)

2 comments

Updated January 16, 2023

P-3C Orion Armada Argentina SF2 -DAT

By Ariell

For the Dev A-Team's P-3
New re paint in Blue for P-3C Orion Argentine Navy
Put this folder in the appropriate place: Documents and Settings or My Documents\StrikeFighters2...

\ Objects \ Aircraft \P-3C, for SFP2.

and P-3C folder that is inside "Decals ARA" in: Documents and Settings or My Documents...

\StrikeFighters2\Decals\

This repaint is more complete than the previous skin, because that was one of my first skins.
The serial numbers are all in decal and decorations now, while the first version were painted.

Feel free to modify as you like this painting,
just give me the corresponding credit. Since I do.

Good flight.Ariell

xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Nueva repintura Azul para P-3C Orion de la Armada Argentina.
Ponga esta carpeta en el lugar correspondiente: Mis Documentos\StrikeFighters2...

\Objects\Aircraft\P-3C, para sfp2.

y la carpeta P-3C que esta dentro de "Decals ARA" en: Mis Documentos...

\StrikeFighters2\Decals\

Este repaint es mas completo que la anterior skin, por que aquella fué una de mis primeras skins.
Los seriales estan todos en decal, así como las decoraciones ahora, mientras en la primera version
estaban pintados.

Sientase en la libertad de modificar a su gusto esta pintura,
solo deme el correspondiente credito. Ya que yo lo hago.

Buen vuelo. Ariell

87 downloads

(1 review)

Updated December 10, 2022

SF2 Westland Wessex HU 5 (DAT)

By Trotski

Westland Wessex Hu 5
Royal Navy skin

A re work of the skin for the Wessex HU5 , the aircraft is originally from the A-Team site, so you will ( if you want to fly this aircraft ) have to obtain the files and lods from there,
This is a complete re do of the whole thing, as I was never happy with the colour, so I have corrected that, I have re drawn all the panels relatively accurately, I haven't bothered with rivet detail as to be honest it doesn't actually show up too well, I have corrected and updated ALL the stencilling, as the original effort was a dogs breakfast to be honest. I have also re done the decals and markings.
So what is included.........2 skins, one for aircraft from 848 NAS who were the squadron in action during the Falklands operation, and one skin for 845 NAS flying off HMS Bulwark in 1966 during the Brunei and Indonesia debacle. I have included the decals for both Squadrons, and also the pilots that I personally use, although green helmets were more the flavour of the day during the Falklands, so feel free to swap out the pilots if that is your taste.
A quick note about the shortfalls of these skins, the aircraft I believe was originally done for SF 1 so it is a little aged, therefore there are some clipping issues you may encounter, I am unable to do anything about this, in reality, we could do with a completely new model of this important aircraft, and hopefully one day it will happen !! So pretty much I have made a silk purse from a sows ear here, the aircraft itself. looks a little "off" I am sure there are some dimension errors, it doesn#'t seem tall enough, and it looks a little bit odd from the front view.....but I could of course be wrong, and the thing is perfect, but I doubt it. The stuff we all are getting used to like working lights and hatches......yeah ok.......not happening on this model, and I forgot to make lights work at least....oh well, such is life !!
Hopefully I shall do some skins for RAF HC3's next so watch this space for those.

As always, ENJOY !!

49 downloads

(0 reviews)

0 comments

Updated March 9, 2020

F-86H F-86H5 Skins 7z

These are the skins of the F-86H and F-86H5 Sabres available here: http://cplengineeringllc.com/SFP1/
This is a partial list. More are coming in the future.
For the F-86H:
All three squadrons of the 312th FBW: 386th FBS, 387th FBS and 388th FBS
Also the 131st TFS (MASS ANG)
For the F-86H5:
1st FG
All three squadrons from the 474th FBG: 426th FBS, 429th FBS and 430th FBS
3595th Combat Crew Training Wing
Air Force Reserve (2584th Air Reserve Flying Center)
115th TFS (CAL ANG)
142nd TFS (DEL ANG)
104th TFS (MD ANG)
141st TFS (NJ ANG)
138th TFS (NY ANG)
198th TFS (PR ANG)
Open to any comments or questions.
Hope you enjoy...
Pappy

107 downloads

(0 reviews)

0 comments

Submitted February 22, 2020

Sikorsky MH-60T Jayhawk

Notes:

This is the final version of the Jayhawk, the definitive MH-60T. My previous versions of the HH-60T (note different name) can be re-named HH-60J if you wish to simulate earlier versions.

Not really an MH-60T Jayhawk, but of course a SH-60B Seahawk. It's the closest we have in SF so it will have to do.

MH-60T is the upgrade armed model of the HH-60J, it has a CAAS glass cockpit (the CAAS also used by various Navy and Army helicopters). With Zur's permission I have used a modded Osprey cockpit to simulate the CAAS (it's a close match).

The MH-60T is armed with the "Airborne Use of Force" pack. This consists of a M-240D MMG, and a semiauto .50CAL rifle - for fun I've made that into a .50CAL HMG so you can blow things up. SF is a combat sim after all.

New with this model is a proper winch of the type used by the Coast Guard, much thanks to Florian "AmokFloo" Schneider for the winch. Unfortunately as a "fake" pilot the winch is only for looks.

She is relatively easy to fly on "normal" mode, which SF helicopters are tuned for. You can hover, fly backwards and sideways, ascend verticaly etc. It takes some practice and skill but is definately doable.

Landing on Cutters should present no problems.

Installation:

Place the MH-60T folder into your Aircraft folder.

Place the Tank_Jayhawk & CGHeloGunnerR folders into your Weapons folder.

Place the CGHeloPilot1 & 2, CoastGuardWinch, JayA, JayA2, JayR, JayR2, JayS, JaySeat and JayW folders into your Pilots folder.

Place the Jayhawk wav file in your Sounds folder.

Place the two TADS files and the Loading wav file in your Flight folder.

Place the contents of the Decal folder into your Decal folder.

You will need to copy over the SH-60B LOD's from the SH-60B Seahawk mod. If you do not already have it, get it from the A-Team Skunkworks site.

Changelog for Version 3:

New Common Avionics Architecture System (CAAS) cockpit by David "Zur" Zurawski.
New Coast Guard Winch 3D model by Florian "Amokfloo" Schneider.
New, larger, Jayhawk Drop Tanks. Not exact but better.
More lights including MFD's for the external model.
FM uprated for the more powerful engines.
Set of decals for 20 birds from 5 different CGAS's.
.50CAL HMG added for fun.
New nose radar.
Various new antenna's.
Rear cabin seats added.

Credits:

David "Zur" Zurawski for the CAAS cockpit.
Florian "Amokfloo" Schneider for the Coast Guard Winch.
A-Team for SH-60B Seahawk Mod. Note my skin is best possible with current model limitations.
Wrench for Hangar/Loading Screens I used as a base.
Kesselbrut for Helo Pilots and Helo Gunner on which I based the Coast Guard pilots and gunner.
Mppd for the two ECM pods.
331KillerBee for the LAU-3 and TER2 which became the Jayhawk's nose radar and drop tank rails.

Anyone else I have missed, apologies.

Thanks to all.

1,701 downloads

(4 reviews)

Updated January 16, 2023

The SR-71A Upgrade Repack (*)

THE SR-71A UPGRADE PACK 2.0 for TW’s SF-2 series sims.
(*) FOR THE A-TEAM’S MODEL

READ CAREFULLY THE FOLLOWING INSTRUCTIONS:

1)DOWNLOAD THE NEW "SR71-R1c.lod" FROM THE A-TEAM SITE/FORUM

2)INSTALL INTO YOUR FAVOURITE GAME MODS FOLDER
(Respecting the folder tree structure for Sounds,Effects,Flight and Objects with its subfolders Aircrafts,Decals and Pilots)

3)PUT THE LOD INTO YOUR SR-71A EARLY AND LATE FOLDERS
(Otherwise model won’t appear)

4)FLY!

TECHNICAL INFOS:

Press Key 10 to activate canopies - autoclosing
Press UP to activate RSO and radar cycle button to operate his cameras (once activated a square appears on top right of your screen,cause pilot's cockpit doesn't have any camera screen)
Press S to activate drag chute

NOTES:

This package contains 2 aircrafts folders the SR-71A Early and the SR-71A Late.
The first splits the the Blackbird’s life from the beginning to early 80’s,thesecond from 1982 to the end of it’s career in 1997-98 including late 90’s airframes reactivations.
This was made to let you use the respective style numbers and markings (early whites and late reds) and for the crews that can wear both early white and late pale orange David Clark S-1030 suits.
Most of the skins are standalones aircrafts,USAF EARLY and USAF LATE are decalled to include many planes for AC type.
Also included in SR-71A Early are Nam Kadena’s Habus (ICHI BAN,RAPID RABBIT,ROSEMARY’S BABY SAN,CHARLIE'S PROBLEM) made for your SF-2V and SF-2VXP Pack installs.
Splitted in these folders are included NASA’s birds too from the early YF-12C to the late plane that made the last historic flight.
There's no pictures regarding real RSO screen sight,the .tga included is a mix between Alphasim's and the Call of Duty Black Ops Sr-71 mission image that inspired me drawing it like that.
Model also can be used For TW's first gen users(just putting the decals inside the respective skin folders and pilots in Aircraft folder)

CREDITS:

CPL Engineering for the model
Alphasim for the original freeware FS-2004 SR-71A
Amokfloo for the 3D pilots
Torno for the skin layout
Spillone 104 to help converting the plane sounds an pilot bits
Pasko and Ordway for the F-106/102 pit base
FastCargo and his Eagle team for the Eagle AB effects that I've used as a base for the Habu's
JAT 81500 and Starfighter2 for the FM help
X-RAY for plane,pit and pilots skins,decals,and to let this upgrade reach the light!
Capun for shadow fixed in SR71-R1c.lod
Paulolopanz for 2.0 upgrades
(Charlie's Problem new skin, back wheels color fixed, jpg all skins converted, decals randomized/tweaked, jpg hangars and loading upgraded/new screens, tga loadout, skins patches, taxing fixed, steering front wheel, autoclosing canopy)

[2.1 V] : Charlie's Problem (missing texture) solved. Thanks Geary for report.
Enjoy!

@ paulopanz

PS: Ciao Max uno dei pacchi più belli mai rilasciati qui a CA aggiornato. Bisognava che qualcuno lo facesse

645 downloads

(5 reviews)

10 comments

Updated March 16, 2016

Post War La-5FN (S-95) (*)

After WWII 31 Lavochin La-5FN fighters and La-5UTI were incorporated into the inventory
of newly formed Czechoslovak Air Force.
Czechoslovakia became the sole operator of the La-5FN outside the Soviet union.
In the CAF the La-5FN were designated S-95 (S for Stihacka - Fighter).
These aircraft remained in use after the type had been withdrawn from Soviet union.
By the end of 1948 most La-5FN had reached the end of thier life and were gradually
withdrawn from service use.

WHAT'S IN:

- A brand new postwar La-5FN/S-95 plane
- 5 new CVL skins
- weapons
- pilot
- sound

CREDITS:

- A-TEAM/CAPUN plane model * (Lod not included)
- paulopanz skins factory & decals

INSTALL:

- all in your mod folder and overwtite
- take La-5FN-R2.lod from A-TEAM "StrikeFighters2 WW2Finland" install and put inside "La-5FN".

NOTE:

I'm going to upload a serie of A-TEAM/CAPUN great WWII planes post war remodded.
I'ld wish again that CA and A-TEAM great sites and people could find a way to be a whole great community, because togheter we will be all richer and stronger.
So don't post anything against anyone here, please.
Let's make mods and not mod-wars!

An early post war German clash coud be wellcome. Some more pieces are incoming ....
That's all

Enjoy.

@paulopanz

171 downloads

(2 reviews)

Submitted August 27, 2016

Post War P-63C Kingcobra (*)

In 1945, 114 P-63C were delivered to the French Air Force (Armée de l'Air), but they arrived too late to see service in World War II.
They however saw service during the First Indochina War before being replaced in 1951.
Initially the French Kingcobras were deployed to Algeria.
Fighter squadron (Groupe de Chasse) 2/6 "Travail", previously equipped with P-39 Airacobras, received their Kingcobras on 18 July at Casablanca;
the pilots were surprised by the higher landing speed of their new aircraft.
The Kingcobra were scrambled to Indochina when the insurgency broke.
Only 60 Kingcobras were operational in Indochina in January 1950, mainly because the Americans refused to supply spare parts.
Starting in February 1951, the squadrons equipped with Kingcobra started to receive Grumman F8F Bearcats as replacements.
Most Kingcobras were mothballed by July. The last flight of a Kingcobra in Indochina took place on September 6, 1951.

WHAT'S IN:

- a post war P-63C model remodded and repacked
- 14 new French Skins and decals added
- 2 new VVS skins
- weapons tweaked and fixed
- steering front gear
- USAF due very little usage disabled from userlist.

CREDITS:

- A-TEAM/CAPUN model (*) no lod inside this package
- paulopanz skins factory etc.

INSTALL:

- All in your mod folder
- add P-63C-R1 taken from A-TEAM site to your new P-63C folder

NOTE:

I'm going to upload a serie of A-TEAM/CAPUN great WWII planes post war remodded.
I'ld wish again that CA and A-TEAM great sites and people could find a way to be a whole great community, because togheter we will be all richer and stronger.
So don't post anything against anyone here, please.
Let's make mods and not mod-wars!

Anyone could build up an Indochina mod? I have some other good pieces to add ...

That's all

Enjoy.
@paulopanz

:boxing:

174 downloads

(4 reviews)

2 comments

Updated August 26, 2016

HH-60 Pave Hawk