My Projects (EricJ)

[+Coupi 4,388]

Hi EricJ,

 

Very acurate work!

 

I've found this document...

 

http://sobchak.files.wordpress.com/2010/09/xf103_cutaway.jpg

 

Coupi.

Edited January 4, 2011 by Coupi

[+EricJ 4,245]

Sweet much appreciated!!!

[+EricJ 4,245]

Going more across...

[+EricJ 4,245]

More work and also thanks to Coupi for the wing,,, tips,,,

[FastCargo 412]

Lookin good!

 

FC

[+Spectre_USA 7]

Lookin good!

 

FC

 

 

Yeah, it is.

 

Lovin' that Red Devils logo on the tail...

 

 

___EDIT___

 

Looked lame without the post above it...

Edited January 7, 2011 by Spectre_USA

[+EricJ 4,245]

Yeah, it is.

 

Lovin' that Red Devils logo on the tail...

 

 

___EDIT___

 

Looked lame without the post above it...

 

Thanks! I think I need to refine it but for some reason I wanted a unit emblem on there ASAP as opposed to nothing... silver skins sometimes can be so boring.

 

More riveting work done on the "wingtips:" (I only call them becasue they are an actual moving surface as opposed to just wingtips, though roll sucks and I know it's not a complete FM)., a small demo is below the top image.

Edited January 7, 2011 by EricJ

[Wrench 9,848]

they're called 'tiperons'. NO, really!!

 

the rivets look great!!

 

wrench

kevin stein

[+EricJ 4,245]

Okay couldn't decide between aileron or flaperons

 

Thanks!

 

Though due to laziness its mirrored on the bottom side as well. I don't think i need to go overboard with riveting either... Trying to give it obviously a more production look as possible.

 

And messing around a little bit with the Shadowcat

Edited January 7, 2011 by EricJ

[+EricJ 4,245]

More AFX stuff.

[+Dave 2,322]

That is too cool for school!

[+EricJ 4,245]

Thanks! Though I've asked Julhelm to see if he can't send a 3D mesh layer to help out with some of the bits...

[+Julhelm 266]

There you go

[+EricJ 4,245]

Schweet thanks!

[+EricJ 4,245]

More work. Haven't forgotten about the F-103 just doing this real quick. I figure (I'm guessing) I can start moving towards warnings and stuff like that since I'm sure the Thunderwarrior has enough rivets, though need to work the tail too.

[+EricJ 4,245]

More tail work, this time got that riveted. Lexx_Luthor or FC, you think you can get me a text description of the access panels so I can start working on warning symbols or recommendations?

[+EricJ 4,245]

Don't think there's much else to do unless it needs to be dirtied up.

[Lexx_Luthor 57]

There is a line drawing of the F-108 and it has dozens of little access panels. You already have done alot of the top panels, for example the little squares on the wing, tail, stab leading edges are for getting at de-icing valves, the big squares you made along top are for fuel.

 

There's a bunch of very small panels on the lower fuselage, mostly behind the inlet where the maint fellas would have easy access. A few panels on and (mostly) under the nose. Radome hinges sideways.

 

If you want, I might could photo-chop your screenshots, upload it, to show where things go.

[+EricJ 4,245]

There is a line drawing of the F-108 and it has dozens of little access panels. You already have done alot of the top panels, for example the little squares on the wing, tail, stab leading edges are for getting at de-icing valves, the big squares you made along top are for fuel.

 

There's a bunch of very small panels on the lower fuselage, mostly behind the inlet where the maint fellas would have easy access. A few panels on and (mostly) under the nose. Radome hinges sideways.

 

If you want, I might could photo-chop your screenshots, upload it, to show where things go.

 

Please do, FC sent me a photo of the drawing of those access points but I couldn't read the text.

[Lexx_Luthor 57]

Okay

[Lexx_Luthor 57]

Okay, first try at this. Panels will be red. Geometry reference lines will be blue. I can't draw. That's AN/APN-71 antenna access panel. All antenna or electronic access panels except the AS/ARA-25 are AN/...

 

 

click ~> http://i35.photobucket.com/albums/d178/Lexx_Luthor/Stuff/ze8.jpg

 

 

 

Obviously, these are rough sizes and locations. Size and Place to Taste relative to your current skin lines. If you would like labels for the panels you already got nailed riveted down, I can add them.

[+EricJ 4,245]

Sweet, now is that just outlined correct?

[Lexx_Luthor 57]

Yea, just the panel outlines, no other details in the drawing.

 

More up later.

[+EricJ 4,245]

cool beans, thanks!

[+EricJ 4,245]

FC sent me the update last week or so and now just decided to show it, the "periscope" and how it looks outside. And should be good enough for government work Lexx_Luthor.