+FastCargo Posted July 8, 2009 Posted July 8, 2009 Er...have you ever actually seen a AGM-114L and a Brimstone side by side? The airframes are basically identical. I should know...I researched and built both models for the TW series. FC Quote
+FastCargo Posted July 8, 2009 Posted July 8, 2009 Yep, what he said. There is a way to make smoke be user controlled, but then the AI wouldn't use it or use it at inappropriate times. In the end, I figured the best way was to have it on all the time..otherwise, why fly an airshow bird? FC Quote
AGOSTINO Posted July 8, 2009 Author Posted July 8, 2009 No to both questions, it says in the read me to answer the first question, that u have to go in the T-38 ini and change the cockpit ini to the rear cockpit if u want to ride in back. As for the smoke, even when u land, it still stays, so no, u cant turn it on or off during flight, sorry. Reread the readme's and it will tell u the same things I just did. Yep, what he said. There is a way to make smoke be user controlled, but then the AI wouldn't use it or use it at inappropriate times. In the end, I figured the best way was to have it on all the time..otherwise, why fly an airshow bird? FC Thanks much!!! Quote
AGOSTINO Posted July 8, 2009 Author Posted July 8, 2009 I'm pretty sure that you need either a laser targeting pod on the aircraft, or fly an a/c that's equipped with a built in designator. It's better to use the Brimstone or Maverick: the AGM-114 is not designed for use on fast moving aircrafts, only helicopters. Its frame is not build for the aerodynamical loads occuring when mounted and fired on and from a jet, AFAIK. Uhu Er...have you ever actually seen a AGM-114L and a Brimstone side by side? The airframes are basically identical. I should know...I researched and built both models for the TW series. FC Thank you very much!!! Quote
AGOSTINO Posted July 8, 2009 Author Posted July 8, 2009 RF----Recon mission F-----Air combat mission. Thank you very much!!!! Quote
zmatt Posted July 9, 2009 Posted July 9, 2009 (edited) The L is fire and forget. That means it can't be laser guided. AGM-114L Longbow Hellfire * Target: All armored threats * Range: 8,000 m (8,749 yd) * Guidance: o Fire and forget o Capability in adverse weather and battlefield obscurants o Inertial guidance o Millimeter wave radar seeker o Home-on-jam anti-radiation mode * Warhead: 9 kg (20 lb) tandem shaped charge high explosive anti-tank (HEAT) * Length: 176 cm (69.2 in) * Weight: 49 kg (108 lb) Edited July 9, 2009 by zmatt Quote
AGOSTINO Posted July 9, 2009 Author Posted July 9, 2009 Can I add the fourth gun to the Voodoo F-101C, i.e. for F-101A Voodoo?? Quote
+column5 Posted July 9, 2009 Posted July 9, 2009 I suppose you could, but it would not be accurate. Quote
+Dave Posted July 9, 2009 Posted July 9, 2009 There is a LOD in the download that has the fourth gun. Not to correct you Don, but some had all 4 guns, some didn't. In fact most pilots didnt know if they were flying an A or a C. Quote
+column5 Posted July 9, 2009 Posted July 9, 2009 There is a LOD in the download that has the fourth gun. Not to correct you Don, but some had all 4 guns, some didn't. In fact most pilots didnt know if they were flying an A or a C. Any plane with TACAN would not have had the 4th gun, IIRC. Quote
+Dave Posted July 9, 2009 Posted July 9, 2009 Any plane with TACAN would not have had the 4th gun, IIRC. Very true but not all got a TACAN. (TACAN was use primarily in Europe.) Some didnt get the TACAN after leaving Bergstrom AFB for England. So as a general rule, (I think it was 2 ship formation) one had to fly with a TACAN. But you are correct, if it had a TACAN, it only had 3 guns. Quote
AGOSTINO Posted July 10, 2009 Author Posted July 10, 2009 I have downloaded and installed the "SF_2_Mig_21M", when I go into the cockpit, I see this: What is this?? Is the periscope?? In the readme file is written: "I was not able to remove periscope from inside the cockpit, if someone could , do it please. Because some Mig-21M were sometime “retrofitted” with periscope and blast plates, I included in the pack a dedicated “retrofitted” data.ini. You have only to change it with the stock one. In this way the plane is identical in shape to Mig-21MF." Quote
+Fubar512 Posted July 10, 2009 Posted July 10, 2009 Yes, that's the rear-view periscope. The later '21 varients required that, as they sported a dorsal 'spine", that was as tall as the canopy, and restricted the pilot's vision to the rear. That was, IMO, an elegant solution to the rearward visibility problem. Quote
AGOSTINO Posted July 10, 2009 Author Posted July 10, 2009 Any plane with TACAN would not have had the 4th gun, IIRC. Very true but not all got a TACAN. (TACAN was use primarily in Europe.) Some didnt get the TACAN after leaving Bergstrom AFB for England. So as a general rule, (I think it was 2 ship formation) one had to fly with a TACAN. But you are correct, if it had a TACAN, it only had 3 guns. Thank you!!! Quote
AGOSTINO Posted July 11, 2009 Author Posted July 11, 2009 I have downloaded and installed the "AV_8Bplus_SF2", in the zip file, there are two tanks to install: (1) AV8_Tank300 (2) AV8_Tank300R I have put them both in the weapons folder, or simply put only the "AV8_Tank300"?? As can I solve this: The tank is not docked exactly!!! Quote
AGOSTINO Posted July 11, 2009 Author Posted July 11, 2009 Yes, that's the rear-view periscope. The later '21 varients required that, as they sported a dorsal 'spine", that was as tall as the canopy, and restricted the pilot's vision to the rear. That was, IMO, an elegant solution to the rearward visibility problem. 1) Is possible to remove the rear-view periscope, from inside the cockpit?? 2) What is, and which is the "retrofitted"?? Quote
Jarhead1 Posted July 11, 2009 Posted July 11, 2009 Dude, seriously, fly the jet, dont worry about the pylon, there are alot of aircraft in the downloads that look like that, just fly it and enjoy it. Quote
+331Killerbee Posted July 11, 2009 Posted July 11, 2009 Go into the AV-8Bplus_Data.INI and edit the Attachment Points of the Pylons in the "Z" Axis. Quote
Spinners Posted July 11, 2009 Posted July 11, 2009 I've seen bigger gaps between Madonna's two front teeth! Quote
+Wrench Posted July 11, 2009 Posted July 11, 2009 Also, instead of using png for the images, can you PLEASE!!! convert them to jpg??? Those load a LOT faster! thank you! wrench kevin stein Quote
AGOSTINO Posted July 12, 2009 Author Posted July 12, 2009 Go into the AV-8Bplus_Data.INI and edit the Attachment Points of the Pylons in the "Z" Axis. Problem solved!!! Thanks much infinitely!!! Change the values as below: (This is for AV-8B-da - AV-8Bplus - HarrierGR7) [LeftWingStation2] 0.60 >>>> 0.52 [RightWingStation2] 0.60 >>>> 0.52 [RightWingStation1] 0.53 >>>> 0.46 [LeftWingStation1] 0.53 >>>> 0.46 Quote
AGOSTINO Posted July 12, 2009 Author Posted July 12, 2009 (edited) No sound when shooting with the 27MM_BK27 of the GripenSF2 and EF_2000!! 1) I have put the Bk27.wav in the Sounds folder. 2) I have put the 27MM_BK27 folder in the Guns folder This is the 27MM_BK27_data.ini: [GunData001] TypeName=27MM_BK27 FullName=Mauser BK 27 Caliber=27.000000 ROF=1700.000000 MuzzleVel=1025.000000 AmmoWt=0.260000 WarheadWt=0.000000 Reliability=100.000000 Accuracy=100.000000 AddLight=TRUE MaxLightRange=1200.000000 FireColor=0.400000,0.320000,0.240000 GunFireEffect=30mmFireEffect GunFireSound=bk27 EffectClassName=30mmEffects EffectTime=0.100000 TracerTexture=Tracer.tga TracerSize=0.200000 TracerDistFactor=0.002000 TracerLength=0.018000 MaxVisibleDist=4000.000000 MaxStreakVisibleDist=1000.000000 TimeFuzed=FALSE Some suggestions as regards?? Edited July 12, 2009 by AGOSTINO Quote
+Fubar512 Posted July 12, 2009 Posted July 12, 2009 You need to add the appropriate entries to the soundlist.ini, and then save it in your flight folder. Quote
AGOSTINO Posted July 12, 2009 Author Posted July 12, 2009 You need to add the appropriate entries to the soundlist.ini, and then save it in your flight folder. What I have to add exactly in the my soundlist.ini?? Quote
+Fubar512 Posted July 12, 2009 Posted July 12, 2009 Just copy the existing format for one of the existing gun sound entries, and rename the two new entries the same as the gun sound. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.