hurc 21 Posted January 12, 2012 (edited) View File Hurc's Nellis Range Mod ***This is a replacement for the previous version 1.0*** This is a modification to the original bombing range to make the home base airfield a likeness of Nellis AFB and take advantage of some of the new Hi-Res Desert textures now available. It also includes some of the objects from the Mescalero Proving Grounds range made By ChampionsVA56. Nellis AFB is located alot farther South on the map that the original base was. This should eliminate getting aggressor A/C right over Nellis as you take off. A few drone and aggressor Aircraft are included in this download. You'll see these flying around the range, and parked at the Range Airfield. All weapons have been removed, or they are equiped with training missles so they won't hurt you. Only hostile aircraft with a "NationName=RANGE" or "AGRS" will show up on this terrain. A modified version of the NATIONS.INI file has been included. It is the stock file with the "RANGE" and "AGRS" nations added. You need the "RANGE" nation defined if you want the drone's showing up and need the AGRS nation for the Aggressor A/C. Provided your other terrains have their "LimitedNations" setup, you won't see the drones's or Aggressor A/C anywhere except the Range. A modified version of the SQUADRONLIST.INI is included with the USAF Thunderbirds squadron added. The bombing range targets use the layout of the Mescalero Proving Grounds range and the drones and Aggressor A/C use its runway to launch and recover. Note: the target area that was known as the Warehouse Targets is now Friendly and is a called the Range Control Facility. When you choose to do a Close Support mission, your tanks will be lined up defending it from the enemy tanks. One thing that is a "feature" not a bug, is that you will have Friendly A/C spawning from Nellis, sometimes right when you are, as Escort or SEAD flights. You cannot collide with them and they will go right thru you as applicable. Good Hunting! Steve "Hurc" Crane Submitter hurc Submitted 01/12/2012 Category Full Terrains Edited August 20, 2012 by hurc 2 Share this post Link to post Share on other sites
+CrazyhorseB34 937 Posted January 12, 2012 This things got some problems, ref pic. Share this post Link to post Share on other sites
hurc 21 Posted January 12, 2012 This things got some problems, ref pic. I should say so, LOL .Checking, but it looks like the wrong .HFD file got in there by mistake. Hurc Share this post Link to post Share on other sites
Shotgun 27 5 Posted January 12, 2012 Just got done flying a quick sortie on this terrain. Didn't see the issue posted above. Worked well for me! Thanks for the upload! Share this post Link to post Share on other sites
hurc 21 Posted January 12, 2012 Not sure what happened there, I just downloaded the mod from CA and added it to my SF2V mods folder and it seems fine ? Did you already have the range terrain and tell it to overwrite ? Share this post Link to post Share on other sites
+Soulfreak 6,530 Posted January 12, 2012 Great one, thank you! Share this post Link to post Share on other sites
+PureBlue 71 Posted January 12, 2012 Thanks Hurc, will fly this tonight Share this post Link to post Share on other sites
+CrazyhorseB34 937 Posted January 12, 2012 It is fixed now. What I did was rename the folder and the ini to "Nellis". I left Mesaclero where it was in the terrain folder. That is what porked it. Naming the folder "Range" was a mistake now we cant have Mescalero and Nellis in the same terrain folder. Oh well it looks good and runs fine, Thanks! Share this post Link to post Share on other sites
hurc 21 Posted January 12, 2012 It is fixed now. What I did was rename the folder and the ini to "Nellis". I left Mesaclero where it was in the terrain folder. That is what porked it. Naming the folder "Range" was a mistake now we cant have Mescalero and Nellis in the same terrain folder. Oh well it looks good and runs fine, Thanks! I had thought about renaming it so you could have 2 different ranges at one point, but thought "who would want 2 ranges ?" LOL. I will be doing a patch update for a few things I found broken so I could rename it at that time. Will test it out. I'm glad to get feedback like this to keep the people happy Hurc Share this post Link to post Share on other sites
+CrazyhorseB34 937 Posted January 12, 2012 (edited) Well.......I would. What if I dont want to see F-16's on the ramp because I am "going to the range" in the 1960's! No worries outstanding MOD man! Great work!!!!! Edited January 12, 2012 by CrazyhorseB34 Share this post Link to post Share on other sites
Wrench 9,882 Posted January 12, 2012 actaully, if you rename the folder, rename the main ini AND rename the TFD & HFD to match, it would ok Share this post Link to post Share on other sites
+Coupi 4,405 Posted January 12, 2012 @ Hurc... Your mod is very very good! @ Wrench... Ok for the modif! Many many thanks Coupi. Share this post Link to post Share on other sites
+JAT81500 135 Posted January 12, 2012 This things got some problems, ref pic. I've got the same issue, but changing the name doesn't fix anything. Share this post Link to post Share on other sites
+CrazyhorseB34 937 Posted January 13, 2012 I did everything you said Wrench but change the TFD & HFD. It all makes sense now. Good tip! Share this post Link to post Share on other sites
Wrench 9,882 Posted January 13, 2012 it's just a simple as matching serial numbers on that 63 split-window fuelie vette!! everything has to be named the same. Share this post Link to post Share on other sites
+GrinchWSLG 24 Posted January 13, 2012 Is the ASR Radar a stock object? Has the animation time on it always been 2.0? Way too fast, only noticed it cuz it was next to the runway as I was landing. Should take 6 seconds per sweep. Make ASR Radar AnimationTime=6.0 in Desert_Types if you want true realism boys. Share this post Link to post Share on other sites
hurc 21 Posted January 13, 2012 Is the ASR Radar a stock object? Has the animation time on it always been 2.0? Way too fast, only noticed it cuz it was next to the runway as I was landing. Should take 6 seconds per sweep. Make ASR Radar AnimationTime=6.0 in Desert_Types if you want true realism boys. Yes, Its the stock ASR radar. BTW, taking into account the feedback so far, I have uploaded the "New and Improved" version 2.0! The main thing is its folder and data files are no longer overwriting the original Range, its now Nellis_Range. So you can revert the original back to your previous and install the new 2.0 version if you want. It also has a few fixes that you may want such as a higher default Low Altitude in the MISSIONCONTROL.INI. With the stock alt you would fast forward (Alt + N) and be hitting a large sand dune, Doh! I didnt see the fix for the radar animation in time to add it, but when I do the 1st patch it will include that. Thanks, Hurc Share this post Link to post Share on other sites
Wrench 9,882 Posted January 13, 2012 (edited) end users can just edit it in the terrain's _Types.ini [TargetType0****] Name=ASR FullName=ASR Radar ModelName=asr.lod TargetType=RADAR ActiveYear=1950 TargetValue=200 UseGroundObject=FALSE DamagePoint=1.0 ArmorValue=0.0 ArmorType=0 RepairRate=0.555 StartDetectChance=80 StartIdentifiedChance=20 IncreaseDetectChanceKey=10 MaxVisibleDist=6000.0 DamagedModel= DestroyedEffect=SmallFire DestroyedModel=asr_destroyed SecondaryEffect=SmallExplosionEffect SecondaryChange=100 AnimationID=1 AnimationTime=2.0 <--- right here!! and.... if you really want to get tricky, grab the ASR_Data.ini from any of my recent terrain mods, and toss it into the terrain folder. It's been tweeked to act as a search radar, and will show up on the RWR and TEWS (mostly) Edited January 13, 2012 by Wrench spell check! Share this post Link to post Share on other sites
hurc 21 Posted January 14, 2012 FYI to all: I saw report of SEAD mission crashing SF2 when on the Nellis_Range and tried it. Sure enough, SF2 goes not responding. Tried it in a stock Red Range terrain, no problems ? See if it does the same for you and let me know if you find a cause or fix. Thanks, Hurc Share this post Link to post Share on other sites
hurc 21 Posted January 19, 2012 (edited) FYI to all: I saw report of SEAD mission crashing SF2 when on the Nellis_Range and tried it. Sure enough, SF2 goes not responding. Tried it in a stock Red Range terrain, no problems ? See if it does the same for you and let me know if you find a cause or fix. Thanks, Hurc I figured out the SEAD mission crash issue - there are no AAA or SAM units in the targets.ini, only mockup objects, and the game engine doesnt see them as SEAD worthy or something like that. This will be fixed in an upcoming patch, but you can fix it by changing the bofors mockup entries in the targets.ini to AAA or SAM as you like. Any AAA or SAM units that you assign to the Range nation in their respective userlist.ini should then show up. Obviously they will start shooting back at you unless you disarm them with an inert weapon or remove their weapons. Hurc Edited January 19, 2012 by hurc Share this post Link to post Share on other sites
Kodiak 27 Posted March 8, 2012 Thanks for the version 2.0, love it! Could you let me in on how to fix the horizon line? How did you fix that? I have this also with one of my two Taiwan terrains and would love to fix that horizon line. Thanks again. My best regards, Kodiak. Share this post Link to post Share on other sites
Doc12345 0 Posted February 11, 2014 Hi, Perhaps I have done something wrong but I have installed this mod and do not have any drone aircraft. Any assistance would be nice. Thanks. Doc Share this post Link to post Share on other sites
+Muesli 2,167 Posted February 11, 2014 This is the terrain only, mate! Share this post Link to post Share on other sites
