Jump to content

Recommended Posts

When whiteboy finish ......  the nice....Suffren Frigate ......(Excelent work )      i think is time to make some more model's

I see many member's ...NEW   and OLD......to learn the 3d max .......

So i had some 3-4 hour's free today and start the ...Tourville..class....

(A big thank's to all member's in combatace...for all the FREE and hard work)

post-76407-0-32387700-1411753422_thumb.jpg

Edited by acesfakia
  • Like 10

Share this post


Link to post
Share on other sites

...ok ...today i finish the boat .....and now is time...for map......model.....when i will have some free time...

I notice a problem ...in the French Hellicopter carrier ...MISTRAL......I CAN"T  land on ..it....? !!!!!!!!.

if i put the data nini ...from the american ...helli Carrier...Tarawa..will be the ...same ..???

...we need also the hellicopter's ...for those nice ship's...

Edited by acesfakia
  • Like 1

Share this post


Link to post
Share on other sites

Actually that seems turning around Y axis based on drawing's blue line.

Not sure how your model is set up but if pivot is oriented to world, meaning X axis points toward right wingtip, Y axis pointing toward nose and Z axis point upward then correct setting would be.

 
RotationAxis=Z-Axis
 
Also not sure if the "PropRotationdirection=Y-Axis" overrides your previous rotation entry. I would only leave the first and delete the 2nd. works perfect on engine fans.
 
Edit: fix wording mistakes
Edited by logan4

Share this post


Link to post
Share on other sites

if that's TK's Hawkeye, it's not going to move. There's no animiations for it in the LOD. Believe me, when I did the 'update' skin and ini pack for it a couple of years ago, I tried it too.

 

Hell, we're lucky the wings fold! (of course, it needed that for the carrier parking)

  • Like 1

Share this post


Link to post
Share on other sites

it needs nodes to work for the fake props ,which it needs any axis wont work...tried it...

Result...it rotates everytime around the Y axis only...

i dont know if adding something via fake pilot will help...only way I see is new model..

remove  component[xxx]=Radar

add this to fuselage

SystemName[004]=RadarDish

 

 

then in engines

 

[RadarDish]
SystemType=PROP_ENGINE
InputName=THROTTLE_CONTROL
EngineID=5
SLPowerDry=0.50
ThrottleRate=0.5
SpinnerNodeName=radar
PropRotationDirection=1
StaticPropNodeName=radar
SlowPropNodeName=radar
FastPropNodeName=radar
SlowPropRPM=5
FastPropRPM=5
MaxPropRPM=5
IdlePropRPM=5
RotationAxis=Z-Axis
ReversePropOrientation=FALSE
ConstantSpeed=TRUE
NumBlades=1

post-1981-0-57705900-1412806675_thumb.jpg

Edited by russouk2004
  • Like 1

Share this post


Link to post
Share on other sites

Is it possible that the radar dish is a separate mesh in itself? Also they no need animation in lod. I use engine fans without any animation for them in max, only fake propengine entry in data.ini. 

Share this post


Link to post
Share on other sites

there no fix whitout getting the max file its like a rotor on a Helo you to ajust the Y pivot axis so that rotates like you want too i had that problem whit the fennec helo long time ago.

Share this post


Link to post
Share on other sites

this if from my E-767

 

you would have to change the mesh names

 

[RADOME]
SystemType=PROP_ENGINE
InputName=THROTTLE_CONTROL
EngineID=9
SLPowerDry=1.0
SpinnerNodeName=RADSPINNER
StaticPropNodeName=
SlowPropNodeName=
FastPropNodeName=
SlowPropRPM=10
FastPropRPM=10
MaxPropRPM=10
IdlePropRPM=10
BSFC=0.00298
ExhaustEmitterName=
ExhaustPosition=
FireSuppression=TRUE
MinExtentPosition=-5.31, 2.17,-0.22
MaxExtentPosition=-4.05, 6.45, 1.19
ConstantSpeed=FALSE
RotationAxis=y-Axis

  • Like 1

Share this post


Link to post
Share on other sites

Thank you veltro2k.......the problem is i don't know the mesh name.....

is TW  model ....for SF2  game......E-2

I found the name  Radar .....so it''''''turns    up down ...and not  on the side.....like whrench ...say ....above.....

...thank you also.

p.s.   nice boeing.....model....will be nice to have a straight....radar .....for the Turkish Air Force........!!!!

Share this post


Link to post
Share on other sites

Changing mesh names won't accomplish anything if the "spinner" isn't defined as a separate mesh, which it's not on that model.  I tried this back in April and May of 2012, so don't waste your time.

Share this post


Link to post
Share on other sites

ok....i make that radar ...some time ..ago ...experiment...if someone need it...and use it,....

I was trying to use it as pilot.......but i can not make it turn...!!!Maybe was need ..render...???...anyway..

 

Today had some free time....so...

The Tourville is ready.....data ini ...decal's ....and ...UVmap....make it 90%.....some detail's .....only and make the test's.....for the game...

  • Like 1

Share this post


Link to post
Share on other sites

.........ok I have a prolem in the Flight deck.....

I put the data ini ...etc.....cordinates.....etc....all ok ......!!!

You can Lounch.....but you can not ...Land.....!

So ....the question......

..the flight deck must be a diferend lod.....??

and if yes.....how is look like.......empty.....same the lod file from the ship....???

For the tourville ...i mean..!     


.....whrong photo.....above...

post-76407-0-71322900-1414597122_thumb.jpg

Share this post


Link to post
Share on other sites

All ships that have a usable flight deck should have a separate flight deck LOD file stated in its data file. Sometimes you can cheat by using that statement alone (with no physical lod).

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..