Jump to content

Recommended Posts

Heyo CA!  So I bought the RAZBAM A-1 skyraiders for SF2 and did my best to update them to SF2 standards but the AI does odd thing with them... they attack at like 89 knots almost at a stall and that leads to crashes, and when they do pull off an attack without a crash they then always fly out to exactly 4.5 miles away from the target and turn around to reattack, now in game time thats a heck of a long time in a skyraider at 89 knots haha, As a comparison I have noticed that the third wire skyraiders tend to do close to the same thing... anyone have a fix?

post-61433-0-01415100-1457070301_thumb.jpg

Share this post


Link to post
Share on other sites

That looks like a 2 seat side by side ,,is that found in sfp-1 or 2 ????

Edited by yubba

Share this post


Link to post
Share on other sites

Both.

I'm almost at my download limit,, I'm looking here, no fine,, even went to wick a pedia to get model number ,, mommy I'm a mess

Share this post


Link to post
Share on other sites

Buddy, the Razban´s A-1E only worth for the cockpit. The model is bad. It doesn´t have a static prop and folding wings. The Capun´s version is a lot better and if you mix it with Razban´s cockpit is the best of two worlds.

  • Like 1

Share this post


Link to post
Share on other sites

Yes. This A-1E is worst spent money on game addon. Like Wilches said only pit good.

I have no access anymore to cpun's. But looks decent on screens.

Share this post


Link to post
Share on other sites

I'm about too swap out the a-4 pit for the f-100

Share this post


Link to post
Share on other sites

Anyone know where the flight model resides in the Data ini file of an airplane?

Share this post


Link to post
Share on other sites

everywhere.

(excepting the statements that define weapons, landing gear, lights, and crew)

Share this post


Link to post
Share on other sites

but this is A-1.

no no the single seat jobs,, I can't find a 2 seater I see the guppy job but that looks like an in line 2 seater,,, the f-100c I downloaded from here didn't have a cockpit config ini file,,,go figure I got a 100 planes I'm never happy,, mommy

Share this post


Link to post
Share on other sites

the only side-by-side pit available for the AD-5/A1-E is Razbams.

 

the standard AD-1 thru AD-7 single seaters are by Dels.  There are 2 versions - AD-1 thru 4 with radar, and AD-6/7 without.

 

What's needed is a FREEWARE version of the AD-5/A1-E that's readily available to ALL people, not just those that bend over

  • Like 3

Share this post


Link to post
Share on other sites

so what'd you think, does this cockpit make me look fat,, you guys are killing me,, now,, wrench says there isn't a side, by side,, and for some odd reason I detest the A-4 pit,, at first I couldn't find the side by side,, then a F-100 was hard to find,,then I couldn't find a f-100 cockpit config ini. slapped the pit in,, well the prop was behind the seat,,not pretty,,then modified the original pit config taking the instruments placements out,thinking it wouldn't be right , got a pit,, that the instruments didn't work,, went and put orginal pit config ini ,,got instruments to work except climb indicator,,, will have to edit it in later confused yet..plus got to figure out how to turn warning lights off, plus you get a drag chute ,,,Kidding.

 

 

index.php?app=gallery&module=images&sect

Edited by yubba

Share this post


Link to post
Share on other sites

Hmm does anyone have any advice about modifying flight models? or possibly want to work on making the RAZBAM skyraiders actually work cause they have some awesome skins and cockpits 

Share this post


Link to post
Share on other sites

the best I can tell you is get a stock plane and your Razbam side by side and compare files I'm stuck on this pit trying to get climb indicator to work..I never tried to edit flight model,, editted everything else but that ,,and I don't know if you can to be honest,,you can check knowledge threads in here there might be something written about it.

Share this post


Link to post
Share on other sites

Sooooo...I cannot believe I'm saying this... But I have completely and totally fixed the issue with some tweaks to the flight model... The RAZBAM skyraiders are now a force to be feared over the digital jungles and deserts!! WOW i cannot believe how well that worked I am almost speachless.  Look what happens when you get a friday off from real flying hahaha

Share this post


Link to post
Share on other sites

well you can't get more anal than this,,,,for you single seaters 

 

index.php?app=gallery&module=images&sect

 

 

index.php?app=gallery&module=images&sect


Sooooo...I cannot believe I'm saying this... But I have completely and totally fixed the issue with some tweaks to the flight model... The RAZBAM skyraiders are now a force to be feared over the digital jungles and deserts!! WOW i cannot believe how well that worked I am almost speachless.  Look what happens when you get a friday off from real flying hahaha

how about some screen shots of that bird

Edited by yubba

Share this post


Link to post
Share on other sites

 

 

how about some screen shots of that bird

Heres the screenies if anyone is interested in the revised FM for the RAZBAM skyraiders just let me know... makes the 20 bucks for all of em well worth it! 

A-1E Fat nose Skyraider cockpit

post-61433-0-53482100-1457153724_thumb.jpg

post-61433-0-68921900-1457153733_thumb.jpg

post-61433-0-02516500-1457153748_thumb.jpg

post-61433-0-13419000-1457153759_thumb.jpg

post-61433-0-17869000-1457153774_thumb.jpg

post-61433-0-31878900-1457153783_thumb.jpg

post-61433-0-53702700-1457153862_thumb.jpg

Share this post


Link to post
Share on other sites

My post above is a f-86 pit ,,just swap the files and change the name and before you throw the old pit config file  away get cockpit position and change it in the f-86 pit config ini.

Edited by yubba

Share this post


Link to post
Share on other sites

I'd fixed the Razbam FM several years ago, just never released it, as it's payware, and has many LOD issues.

 

-----------

 

yubba, you are a complete and utter moron....you dishonor and shit upon all the hard work the modders and model builders have done with you idiotic "fixes". You keep pushing all the wrong buttons, and don't listen to those of us that have been carrying this game on our shoulders for the last 14 years.  

 

didn't I say above that Dels had already DONE a 100% perfect single seater pit for the Skyraiders? For both early radar equipped, and later non radar equipped? 

 

this thread is done

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By TheRealJuralumin
      I don't really know how this happened, but the font for the menu and HUD has changed, text is now slanted and some letters and words are getting slightly cut-off, it's not game breaking in the slightest, but it is a bit annoying as some things have proven difficult to read. I will attach some screenshot examples. If anyone knows why this has happened and how I can fix it, it would be very much appreciated!




    • By johntitor
      So I'am playing this strike fighters 2 black sea crisis addon and I believe I did everything right . The campaigns work for all factions except United States air force . When I select them and a specific squadron of aircraft and click on generate campaign ,the game just crashes to desktop . The same thing does not occur for Russian , ukrainian air force  and united States navy . What could I be missing here . ? For some reason , the USAF aircraft are easily flown in single mission scenarios . Like the F16 will fly in single missions but when I try to click on its campaign . The game just crashes . 
       
      Your help is needed!
    • By VonS

       
      Apr. 17, 2023 Update - Please find, available at the link below, my previously released mods. for RoF United Ed. - this time as a convenient, consolidated package that has been updated with the latest tweaks. Do read the included "Read Me" files, where available, for more info., particularly the "READ_ME_ROF_General_Info" file that is located in the root folder of the package when unzipped. This package is provided "as is," with no active support beyond the included explanatory files. The "Consolidated Mods. New" Package contains the latest AI mod. (ver. 1.4) for RoF United, as well as mods. previously offered separately, such as the "M-S Type H Campaigning Tweak," the "PWCG modulations" files, etc.
      Apr. 29, 2023 Update - Included below the link to the "Consolidated Mods. New" package is Ver. 3 of the PWCG "modulations" files (to be installed manually in the PWCG ver. 16.3.1; see directions included in the larger, consolidated package). Ver. 3 of the "modulations" files increases wind and turbulence settings, as well as provides greater chance of encountering more capable AI when flying PWCG campaigns, especially if used in conjunction with my newer AI mods. for RoF (such as ver. 1.36 or 1.4, included in the big consolidated package).
      Important Note: if using the Ver. 3 PWCG "modulations" files, instead of the Ver. 2 ones included in the big consolidated package for RoF -- make sure to change settings, if you choose to change any, from within the modulations, i.e., the RofCampaignSpecific, files themselves -- otherwise, tampering with relevant settings from within the PWCG advanced menu options will automatically delete extra entries for the AI that I've included in the Ver. 3 modulations. This note does not apply to the Ver. 2 modulations since those don't contain any extra AI settings.
      Feb. 6, 2024 Update - RoF AI mods. vers. 1.36 and 1.4 have been upgraded to vers. 1.37 and 1.41, respectively. The new versions have tweaked the AI's ability to follow commands more quickly and/or properly. Ver. 1.41 also contains further tweaks to safe alts. for the AI, to minimize unnecessary crashes and very low-level dogfighting. The entire consolidated package has been renamed from "Consolidated Mods New" to "Consolidated Mods New V.2" (i.e., Version 2).
       
      ROF_ConsolidatedModsNewV2_VonS.zip
      ForRoFpwcgModulationsVer3_VonS.zip
      Happy flying,
      Von S 
       
       
    • By JamesWilson
      Hi everyone,
      I was wondering how to customize the numbers after your callsigns, since it always gives me the same ones.
      I think i managed somehow once, a bit of time ago, but now i forgot and have no idea how to.
      I'm not talking about how to customize the callsign name, but the unit number after it.
      As you can see in the Roster and in the picture under, i get "Fast Eagle 1-1" and "Fast Eagle 1-2"
      Here are some examples:


      The numbers on the tail, wing and nose numbers are customized, cause i managed how to change them, choosing them individually for each unit in the mission file by changing "AircraftNumber=" and typing the number, like "2" (as for 202). It doesn't change by typing the whole number tho, like 202 by typing 202, but it goes by typing the number that corresponds to the list of numbers you have. For example, In a list that goes from 200 to 400, you will have to type 10 to get 300. Here i just typed "2" and "7" since the list starts from 200


      IIRC, in the past i just used to type the Aircaft number just like that, and in-game i had the proper number after the callsign, like "Fast Eagle 102", not just the number displayed on the plane livery.
      How do i do? I'm pretty sure that it's possible to have "Fast Eagle 102" on my screen HUD and in the Roster
      Thanks in advance for helping me.
       
    • By JPMoney
      I’m flying an F-16I Sufa mod for Strike Fighters 2 Israel. I’ve modified the loadout ini file in an attempt to change the missile types and positions on the pylons. I’m having a consistent issue with the outer pylons (not the wingtip mounts, but the furthest pylons from the fuselage under the wings). I want these to carry one AMRAAM each, and as far as I can tell I have modified the loadout ini, the related missile object inis, and aircraft ini to be able to accommodate this. However, when I go to a single mission in-game and access the loadout screen, those outer pylons are always empty (no missiles). When I go to add missiles manually to these pylons, all AMRAAM types only are available in “4s” and not “2s.” So in other words it’s trying to mount 2 AMRAAMs on each pylon, which shouldn’t be possible (realistically), as these are set up for single missiles only. The F-16I ini file does have a relatively complex series of pylon rules, but I believe I have it set up to be able to mount AMRAAMs on these pylons, and I can’t find any setting in any file that would allow me to indicate there should only be the option to mount one missile per pylon in the loadout screen in game. I suspect a setting related to this “4 missiles” issue is preventing my loadout ini file from operating correctly and defaulting my vipers to have AMRAAMs on those pylons. 
       
      Any thoughts on a setting I am missing here?
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..