First Eagles - WWI and Early Years - Skins

OEFFAG Ba 53 & Ba 53 (feld Änderung)
REDUX
 
 
A rework of Jan Tumas excellent Oeffag Ba 53, I have kept this one simple as there were only about 50 or so Ba 53's built, a few of the early ones, about 10 or so were built using the Albatros D II planform, but this was swiftly changed to the D III instead. The Aircraft was actually better than the Albatros DIII, having a more powerful Austro Daimler power plant, also the Oeffag techies, figured out that the D III wing was a bit of a nightmare, and tended to drop off if you did any of that " Fighter Pilot Shit" So they strengthened the lower win by adding in another spar. Of course there is always a downside, although in this case a minor one, which was the armament, first off, it was a Swartzlose M7, the standard Infantry MG of the Autro Hungarian Army, it was orerated by a blowback system, which in itself was not the problem, the problem lay with the oiler, which had to oil each round as it was chambered, not an ideal set up, especially as the oil used to blow back into the pilots face, and bugger up his aiming somewhat. As well as this, the guns were buried deep in the cowling, so stoppages were virtually impossible to clear, Which I assume could spoil a pilots whole day at times  There were also issues with the interrupter system, which was not very good in conjunction with the Swartzlose, so a special Tacho had to be fitted to Oeffags, to warn the pilot when the interrupter was not going to play nice, and let the gun shoot nice holes in the Airscrew.........Yes.....Well !! 
There are 2 files in this upload, the main Ba 53 file, with all the gubbins, decals and all that good stuff, the second file is for the  (feld Änderung) aircraft, basically the same plane but they took the cowl off !! Atogether there are 8 skins, 3 which are my usual Factory Finish ones, so very generic, the other 4 are of named pilots, see the thumbnails for an ideaof what is in there for you. Everything is in a ready to go state as usual, the second file is just the Field modded Ba 53, on its own, so that will need to be dropped into you Save game file under "Objects - Aircraft" and you should be good to go. I have used my own decals and skins to rework these Oeffags, the 153 series will follow shortly !!
A shout out to Jan Tuma for his original work, on this rather nice Albatros version, also to Von S for the updated FM's ( also an apology to the redoubtable Von S for not crediting him in my other Albatri uploads, my most profound apologies !!! ) and Geezer for the Pilot models. 
 
As always............................ENJOY    

ALBATROS  D III (OAW)
WITH JASTA 39
REDUX
 
This upload comprises of 3 Rar files, the first is the standard D III OAW, 2 of which are in generic markings, and 2 which are Ottoman machines, one in earlier markings of the black square, the second with the late war red squares. The other 2 Rar files are all for Jasta 39 Albatri, 2 generic, and the rest in the markings shown in the thumbnail pictures heading this download. Again as with the previous D III's I uploaded previously, the Jasta 39 aircraft are in their own complete fils, so you can use them as a seperate Jasta so it is named Albatros DIII (OAW) (JASTA 39)......you know the drill by now I am sure !!! The red and white candy stripe one, was a real pain in the bum to do, mainly because of the bloody awful way the models were made, so getting the stripes to marry up correctly had me cursing and swearing quite considerably. So it is not 100% perfect, but it is as good as can be expected, and certainly better than the original skin that was done in this scheme, I forget who originally uploaded it, but for sure it is a vast improvement.
As ever, everything is included in the package, Decals, Guns........blah blah blah..........You will need to download all the files as the decals etc for the Jasta 39 Albatri are in the first RAR file.............As for the rest, I am not going to repeat myself, as I am sure most of the folks downloading this, are used to my stuff, so I wont bore you with the blurb !!! 
 
 
As always...................ENJOY  

ALBATROS D III
REDUX
PART 4
 
The fourth and final part of the D III series, aircraft are all from Jasta 12. Again you will need the PART 1 download of the D III for all the decals etc.
 

ALBATROS D III
REDUX
PART 3
 
The third part of the DIII collection, this time for the Jasta 11 machines. again you will need PART 1 for all the decals and other bits.

ALBATROS D III
REDUX
PART 2 ( A & B)
 
The second file in the Albatros D III saga, these are the Jasta 2 aircraft. Please not you WILL need PART 1 as that has all the decals sounds etc. etc. 
 
ENJOY !!!     

ALBATROS D III
REDUX
PART 1
 
An overhaul of the Albatros D III, this upload will be in 4 parts, this the first of 4, are 2 generic Albatri, in factory finish, with spurious markings, 1 Yellow and black checked example from Jasta 36, and Ottoman machine in generic markings, as most Turkish aircraft seemed to be. The following 3 uploads shall be machines from Jastas 2, 11, and 12 respectivly. each jasta will be the complete D III, with the .INI file named thus " ALBATROS D III ( JASTA***) this allows you the end users to have Jasta specific Albatros D III's seperate from the generic D III files, sorry I am possibly not explaining this correctly, but it will become self evident should you download ALL 4 files.
On to the description of what I have done here, I have redrawn the panel lines, fixtures and fitting, and generally tidied up the frankly quite awful mess that are the Thirdwire skins, obviously, I have not done any remodelling as such, other than to move panels around, and put things in that are missing from the TW stock skins. I have reworked ALL of the Camouflage, and wood textures, and made the aircraft clean, rather than the over done dirty textures on the originals. 
As with all my previous uploads of the DI/DII/W4 series, these are just straight up unpack and drop into your save directory, with again, the warning that the WILL overwrite any existing D III files you may already have installed, so if you wish to preserve your originals, make sure you back 'em up !!! or rename !!!
Everything is included as usual, Aircraft, Skins, Decals, Guns, and Pilots, and of course the sounds.  Unpack, plug, and fly !!
 
As always..............ENJOY !!!    

ALBATROS D II ( OEF )
REDUX
 
This is the file for the Albatros D II ( OEF ) which for some reason I didnt include with the earlier upload of the D II ( Late ) I was sure that I had included this file, but apparently I did not, and no one, brought it to my attantion, you little tinkers you !!! However, here is the file that SHOULD have been there, and was not.
Anyway, as always, both these Albatri are in plug and play format, unpack, and install, with the usual proviso, that any existing D II ( Late ) and ( OEF ) aircraft you may have WILL be overwritten, so please ensure you do the sensible thing, and back up or rename.
Everything is included for both aircraft, Decals, Guns, Pilots and sounds. 
 
A shout out to Stephen 1918, for his sterling work on the original models, also to Geezer for the pilot models.
 
As always...............................ENJOY !!!  

ALBATROS  W 4 ( EARLY )
ALBATROS W 4 ( LATE )
REDUX
 
I have redone both the Early, and Late versions of the Albatros W4 seaplane fighters, completely reworked skins, in both German Navy and Austrian navy versions. the early models are in dark ply for the Austrian, and a light ply for the German machines. These also have alt versions of the schemes if you dont like the options I have used as the default, you will see this when you install the relevant W4 ( early ) Schemes, so if you are not keen on MY new skins, just swap them with the alts. The W4 ( Late ) has the Austrian aircraft in an all over Blue Grey linen, and the German one is in the original Blue Lozenge over Blue, I have redone the lozenge somewhat, to allow for the panels I have reworked, on the fuselage, and floats, so it is very similar to Stephen 1918's original scheme, just tweaked.
Anyway, as always, both these Albatri are in plug and play format, unpack, and install, with the usual proviso, that any existing W4 ( Early ) and ( Late ) aircraft you may have WILL be overwritten, so please ensure you do the sensible thing, and back up or rename.
Everything is included for both aircraft, Decals, Guns, Pilots and sounds. 
 
A shout out to Stephen 1918, for his beautiful work on the original models, also to Julio Junqueira for the pilot models.
 
As always...............................ENJOY !!!  

ALBATROS  D II ( LATE )
ALBATROS D II ( OEF )
REDUX
 
An overhaul of both the Albatros DII  late version with the upper wing mounted radiator, and the Oeffag built version, with the Austro Daimler powerplant, and armed with a single Shwarzloze 8mm machine gun, the Oeffag variant is in standard linen over ply for the KuK Luftruppen, then we move on to the D II ( Late ) these include 2 differnt Turkish machines one with an all over Green/Brown Camouflage scheme, and the other in ply and a 2 tone scheme on the upper wings and tail unit, the markings are fictional of course just to give a little visual uplift, as Turkish machines seem to have been very bland, also very few photos of actual Ottoman aircraft either, so of course you can always remove the markings if you wish. Next we have a generic 3 tone Camouflage over medium ply, all these Albatri have again generic personal markings, as they do not represent any particular Jasta. The final one for your enjoyment, is an all over 3 colour Camouflage, very smart looking if you ask me, again the markings are fictional, but all 16 airframes in the " Jasta " have the same stripes, and there are no personal markings ( not every German aircraft did have them anyway )
Anyway, as always, both these Albatri are in plug and play format, unpack, and install, with the usual proviso, that any existing D II ( Late ) and ( OEF ) aircraft you may have WILL be overwritten, so please ensure you do the sensible thing, and back up or rename.
Everything is included for both aircraft, Decals, Guns, Pilots and sounds. 
 
A shout out to Stephen 1918, for his sterling work on the original models, also to Geezer for the pilot models.
 
As always...............................ENJOY !!!  

ALBATROS  D I I  ( EARLY )
REDUX
 
 
Following on from my previous upload of the Albatros D I, it is only right and proper to continue on with the D II ( Early ) As with my previous uploads, this is a total workover of the original D II ( Early ) From Stephen 1918.
So, a brief callout of what is included skins wise. First a generic 3 tone Camo scheme over light ply, I have done this as that way I could amalgamate several generic but mainly correct personal markings, without assigning them to any particular Jasta, so a pot luck/generic DII. The next one is an early Turkish Ottoman Albatros, again very generic, and not intended to be any particular Turkish unit. Then the really tasty one, or at least I think it is, 16 Aircraft from Jasta 2, including 7 correctly numbered and marked Albatri, as follows :-
386 Oswald Bolcke
437 Erwin Böhme
390 Otto Höhne
391 Karl Büttner
426 Lt. Günter
372 Stefan Kirmaier
491 Manfred Richtofen
The remaining 11 aircraft are figments of my imagination, but I think they fit in with the general theme of Jasta 2 Bolcke. 
Finally I have included Von Richthofens first red Albatros, which he used later on in 1916 most likely after the unfortunate death of Oswald Bolcke.Apparently it was his orginal Albatros ( D491 ) with all the fuselage, markings and tail feathers given a red wash, very cool indeed. 
As for everything else, as with all my uploads the whole package is there, so it is an un zip, drop and go sort of deal. If you haven't had any of my aircraft before, then everything is included in this package, Aircraft, Skins, decals, Guns, Sounds, and Pilots. Merely unpack the zip/Rar file, and drop it into the save folder where all your other goodies are stored. I shall again Warn that this package WILL overwrite any other ALB DII ( Early ) you already have installed if that is the case, so PLEASE PLEASE PLEASE back it up or rename it so no untoward harm comes, so there you go, I warned you, so if you futz it up, it's your fault 'cos ya didn't read the boring blather on here 
 
As Always..............ENJOY!!!!!................

ALBATROS  D  I
REDUX
 
A workover of my previously uploaded Albatros DI models, I have completely reworked the skins and markings, there are 5 versions in this upload, A factory "Standard" skin in ply and Linen, a version with a lighter stained ply and more yellowis Linen for the wings and empenage. The next one is an all over 2 colour camouflage over blue scheme, then an rework of the  previously released  DI of Prince Friedrich Karl von Preußen, which is an all over sea green colour, there IS a discussion as to whether this aircraft had a camouflage scheme on the upper surfaces, however it is only speculation, as there are no actual photos I can find of this machine. The final DI is an all blue with camouflage upper surfaces, of Hans Bethge of Jasta 1.
Everything as always is packed up and ready to go, just unzip, and drop into your directory where you have all your other flying circusses !!!  Just be aware it will over write any existing DI's you may have already installed, so dont forget to backup or rename the original files, to avoid any unfortunate mistakes !!!! 
Included are  all the sound files, decals, guns, pilots and of course the actual Albatros.
A shout out to Steven 1918 of course, without whom we wouldnt have the DI/DII Albatros in the first place, also to Geezer for the Pilot figure, and anyone else I may have inadvertently forgotten.
 
As always...............................ENJOY !!!   

The Blue Max Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from The Blue Max film.
- Fokker Dr.1 flown by the character Bruno Stachel.        (Several versions)
- Fokker Dr.1 flown by the character Willi von Klugermann. (Several versions)
The character Bruno Stachel used two Fokkers in the Blue Max film, one with the cowling painted full black and other with the
cowling tip in black. 
You will find both of them in the skin pack.
- I did Optional hangar screens for Bruno Stachel and Willi von Klugermann characters. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Bruno Stachel
Name=Bruno Stachel
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Willi von Klugermann
Name=Willi von Klugermann
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Stachel HANGAR 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Fly Boys Fokker Dr.1s skin Pack for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A full set of 2 skins to FokkerDr1 by Third Wire Productions used by characters from Fly Boys film.
- Fokker Dr.1 flown by the character Black Falcon.
- Fokker Dr.1 flown by the character Franz Wolfert.
- I did Optional hangar screens for Black Falcon and Franz Wolfert. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN" folder of each character. 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Black Falcon
Name=Black Falcon
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
[TextureSetXXX]
Directory=Franz Wolfert
Name=Franz Wolfert
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000

Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others
skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main
folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Wolfert-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in
any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 
,

 

The Great Waldo Pepper Fokker Dr.1 skin for First Eagles 2
__________________________________________________________________________________________________________
What you will find in this Fokker Dr.1 skin Pack:
 
- A skin to FokkerDr1 by Third Wire Productions used by The Great Waldo Pepper film.
- Fokker Dr.1 flown by the character Ernst Kessler.
- I did Optional hangar screens for Ernst Kessler character. They are in 1920x1200 size. 
  You will find this in the "HANGAR SCREEN". 
- You will find also an optional Normal map (DR1_6_BUMP.bmp) figure which works best with the new Spandau machine gun I painted.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION - This skin do not uses decal files, so will be easy install.
(SKIN)
- Drop or copy the inside contend of the folder "FokkerDr1" to your "FokkerDr1" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "FokkerDr1".ini file.
[TextureSetXXX]
Directory=Ernst Kessler
Name=Ernst Kessler
Nation=GERMANY
Squadron=
Specular=1.800000
Glossiness=1.000000
Reflection=0.100000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "FokkerDr1.ini" file order for others skins that you have already installed before.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE HANGAR SCREEN:
- To use it, you must drop or copy the jpg file of your choice from the "HANGAR SCREEN" folder. in your "FokkerDr1 aircraft main folder", next, edit your "FokkerDr1.ini" file and add this line:
As an example:
[AircraftData]
HangarScreen=Kessler-HANGARSCREEN 01.jpg  <------ add this line 
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS FOR THE Optional Normal map (DR1_6_BUMP.bmp) figure:
- Drop or copy the inside contend of the folder "FokkerDr1" (DR1_6_BUMP.bmp) to your "FokkerDr1" folder. 
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins for Fokker Dr1 and hangar screens.
- Third Wire Productions for the Fokker Dr1 model. 
__________________________________________________________________________________________________________
- special thanks to Third Wire Productions for the excellent FokkerDr1 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24bis skins of Escadrille 65 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing Nieuports 24bis used by Escadrille 65.
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 65.
- A full squadron (Escadrille 65) with 100 decal serial numbers and squadron markings, including the Nieuport 24bis flown by the French Ace Charles Nungesser. 
- 3 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 65-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC 65
Name=ESC 65
Nation=FRANCE
Squadron=65ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24 skins of Escadrille 75 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 75.
- A full squadron (Escadrille 75) with 100 decal serial numbers. 
- A special skin folder focusing on Slt William Hérisson a french Ace with 11 victories. 
- 2 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file and add this line:
[AircraftData]
HangarScreen=ESC 75-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 75-HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 75
Name=Escadrille 75
Nation=FRANCE
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 75a
Name=Slt William Hérisson
Nation=FRANCE
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24 skins mID Nieuport N24 First Eagles 2of Escadrille 3 for E
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 3.
- A full squadron (Escadrille 3) with 100 decal serial numbers. 
- 2 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file and add this line:
[AircraftData]
HangarScreen=ESC 3 HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 3 HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_centaine.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 3
Name=Escadrille 3
Nation=FRANCE
Squadron=3ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24 skins of Escadrille 87 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 87 "Les Chats Noir".
- Two types of paint patterns for the Nieuports used by Escadrille 87, one in silver-dope and other in french pattern camouflage. This enables a mix of different types when you fly single missions.
- A full squadron (Escadrille 87) with 100 decal serial numbers. 
- 3 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website:http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=Escadrille 87 (Silver Dope)
Nation=FRANCE
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Squadron=87ESC
[TextureSetXXX]
Directory=ESC 87
Name=Escadrille 87
Nation=FRANCE
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Squadron=87ESC
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24bis skins of Escadrille 87 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing Nieuports 24bis used by Escadrille 87 "Les Chats Noir".
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 87.
- A full squadron (Escadrille 87) with 100 decal serial numbers and squadron markings. 
- 3 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=Escadrille 87
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of Escadrille 87 for EmID N27_FAS First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 27 used by Escadrille 87 "Les Chats Noir".
Some serial numbers are historicals, others are not.
__________________________________________________________________________________________________________
Historical Sources:
- Albin Denis website: http://albindenis.free.fr/Site_escadrille/page_escadrilles_1_a_500.htm
__________________________________________________________________________________________________________
** What you will find in this Nieuport N27_FAS skin Pack:
- A full set of skins & decals to Nieuport N27_FAS used by Escadrille 87.
- A full squadron (Escadrille 87) with 100 decal serial numbers including the Nieport 27 flown by William Wellman and other by René d'Estainville. 
- 3 New optional hangar screens for Nieuport 27 (N27_FAS) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 87-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=ESC 87
Name=Escadrille 87 (Camo)
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 87 (Silver Dope)
Name=ESC 87 (Silver Dope)
Nation=FRANCE
Squadron=87ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 27 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Nieuport 27 skins of Escadrille 561 for EmID N27_FAS First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 27 used by Escadrille 561 on Venice, Italy from 1917 to 1918.
To be used with the campaign "Armchair Aces Over Italy" by Ojcar. 
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
Many serial numbers are historicals, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII. 
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________
** What you will find in this Nieuport N27_FAS skin Pack:
- A full set of skins & decals to Nieuport N27_FAS used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 6 New optional hangar screens for Nieuport 27 (N27_FAS) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 04.jpg      <------ add this line to use the fourth option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 05.jpg      <------ add this line to use the fifth option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 06.jpg      <------ add this line to use the sixth option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=ESC 561
Name=ESCadrille 561
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561b
Name=ESC 561 (Silver dope)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561c
Name=ESC 561 (Light camo)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 27 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________

Nieuport 24 skins of Escadrille 561 for EmID Nieuport N24 First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 24 used by Escadrille 561 on Venice, Italy from 1917 to 1918.
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
You will also find two types of paint patterns for the Nieuports used by Escadrille 561, one in silver-dope and other in french pattern camouflage. This enables a mix of different types when you fly single missions.
Many serial numbers are historical, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________ 
** What you will find in this Nieuport 24 skin Pack:
- A full set of skins & decals to Nieuport 24s used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 3 New optional hangar screens for Nieuport 24 (N24) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24 aircraft main folder, next, edit your N24.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24".ini file.
[TextureSetXXX]
Directory=ESC 561
Name=Escadrille 561 (Silver Dope)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=ESC 561a
Name=Escadrille 561 (Camo)
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24 and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24 model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 24bis skins of Escadrille 561 for EmID N24bis First Eagles 2
__________________________________________________________________________________________________________
This is a skin pack, representing most of the Nieuports 24bis used by Escadrille 561 on Venice, Italy from 1917 to 1918.
To be used with the campaign "Armchair Aces Over Italy" by Ojcar.
Many Escadrille 561 pilots, kept thier personal markings even as they switched to different types of Nieuports and SPADs.
When the Nieuport model featured different interpretations of markings, I added it as a new option on the decals. So you will find some repeated pilot names to represent these versions. While all markings are historical, some are unrelated to the Nieuport type. I decided to put them in, for greater diversification and greatest fun. If you don't want to use them, just delete or rename them from the decal folder.
Many serial numbers are historicals, others are not.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
Historical Notes:
Escadrille N.561 was a French squadron dedicated to defending Venice, Italy from aerial attack. Stemming from a six plane detachment assigned to Venice's defense on 15 August 1915, after its foundation in June 1916, Escadrille 561 would defend Venice until 1 January 1918. Detached then to support the French X Armee during its sojourn in Italy, the squadron remained on the peninsula after the X Armee had returned to France. By war's end, Escadrille 561 was credited with destroying 12 enemy aircraft and four observation balloons. The Escadrille 561, produced only one Ace, Sergeant André Robert Lévy credited with six aerial victories.
The squadron flew most of the manufactured Nieuports (10, 11, 12, 16, 17, 21, 23, 24 and 27) and a small number of Sopwith 1A2, SPAD VII, SPAD XI & SPAD XIII.
__________________________________________________________________________________________________________
Historical Sources:
- Aéro-Journal n°39, L'Escadrille de Venise, entre guerre et dolce vita, David Méchin.
- Albin Denis website: http://albindenis.fr
__________________________________________________________________________________________________________
** What you will find in this Nieuport N24bis skin Pack:
- A full set of skins & decals to Nieuport N24bis used by Escadrille 561.
- A full squadron (Escadrille 561) with 100 decal serial numbers and 22 pilot personal markings. 
- 4 New optional hangar screens for Nieuport 24bis (N24bis) in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N24bis aircraft main folder, next, edit your N24bis.ini file. and add this line:
[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 01.jpg      <------ add this line to use the first option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 02.jpg      <------ add this line to use the second option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 03.jpg      <------ add this line to use the third option.

[AircraftData]
HangarScreen=ESC 561-HANGARSCREEN 04.jpg      <------ add this line to use the fourth option.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N24bis" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N24bis" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N24bis".ini file.
[TextureSetXXX]
Directory=ESC561b
Name=Escadrille 561
Nation=FRANCE
Squadron=561ESC
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N24bis.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for Nieuport 24bis and hangar screens.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 24bis model.
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of 83a Squadriglia for EmID Nieuport N27_FAS First Eagles 2
This is a  pack of skins focused on the history of the 83a Squadriglia. 
Historical notes: The 83a Squadriglia was formed on May 5, 1917 with several separate sections.
On 28 December 1917 the first Nieuport 27 arrived. In January 1918 Captain Giulio Moroni arrived and took command. In March there are 6 pilots including lieutenants Rino Corso Fougier and Enrico Gadda, 8 Ni 27 and one Ni 17. On March 18 the 83a Squadriglia moves with the 1st section to the San Pietro Airfield. On March 22 Fougier commands the squadron.
 At the end of the war 83a Squadriglia passed under command of the 6th Army with 14 Nieuport 27 having carried out 2,500 combat missions in 1918. In February 1919 the squadron passed to VII Group with 3 Nieuport 27 and 14 Hanriot and on March 25 it was dissolved.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
** What you will find in this Nieuport 27 skin Pack:
- A full set of skins & decals to  Nieuport 27s used by 83a Squadriglia from December 1917 to November 1918. Some serial numbers to those planes are historicals others not.
- A full squadron (83a Squadriglia) with 101 historical & fictional serial numbers. Including the Nieuport 27 flown by Rino Corso Fougier and Enrico Gadda.  
- 5 special skin folders focusing on knowed Nieuports 27 of 83a Squadriglia with historical & fictional serial numbers. 
 
- New textures for the N27_FAS cockpit with new italian instruments 
- 2 New optional hangar screenS for 83a Squadriglia in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=83HANGARSCREEN 01.jpg       <------ add this line to use the first option.
[AircraftData]
HangarScreen=83HANGARSCREEN 02.jpg       <------ add this line to use the second option.
__________________________________________________________________________________________________________
- I painted new textures for the cockpit, with a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
- Releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
- I set the 1024x1024(JPG & TGA) as standard for the planes. 
*OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=83 Squadriglia
Name=83 Squadriglia
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=83 Squadriglia 2
Name=83 Squadriglia 2
Nation=Italy
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=83 Squadriglia 3
Name=83 Squadriglia 3
Nation=Italy
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=83 Squadriglia 4
Name=83 Squadriglia 4
Nation=Italy
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=83 Squadriglia 5
Name=83 Squadriglia 5
Nation=Italy
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=83 Squadriglia 6
Name=83 Squadriglia 6
Nation=Italy
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, cockpit and hangar.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________
 

Nieuport 27 skins of 81a Squadriglia for EmID Nieuport N27_FAS First Eagles 2
This is a  pack of skins focused on the history of the 81a Squadriglia. 
Historical notes:  81a Squadriglia of the "Corpo Aeronautico Militare" was founded at the Central Flying School in Arcade, Italy in March 1917. The squadron was displaced at the Battle of Caporetto. 81a Squadriglia joined 6o Gruppo at Istrana. The move would put them in position for the great air battle over their base on 26 December 1917. 
In February 1918, the squadron began replacing its Nieuport 17s with Hanriot HD.1s. Hanriot supplies being insufficient, some Nieuport 27s were also brought on strength. The squadron served on through Summer 1918. Then, on 26 October 1918, it was included in the Massa da Caccia (Fighter Mass) that supported the victorious final Italian offensive at Vittorio Veneto. When the war in northern Italy ended on 3 November 1918, the 81a Squadriglia had flown 4,118 combat sorties, engaged the enemy 230 times, and were credited with 34 aerial victories. The squadron suffered four dead. It still had 21 Hanriots and a Nieuport 27 in service.
You will get better profit of these skins with the campaign "Armchair Aces Over Italy" by Ojcar. If you do not have this campaign, you could find it here. https://combatace.com/files/file/17169-armchair-aces-over-italy/
__________________________________________________________________________________________________________
** What you will find in this Nieuport 27 skin Pack:
- A full set of skins & decals to Nieuport 27s used by 81a Squadriglia in 1918. 
Some serial numbers to those planes are historicals others not.
- A full squadron (81a Squadriglia) with 101 historical & fictional serial numbers.
- A special skin folder focusing on Sergente Carlo Corti with 2 confirmed victories & his Ni.11339 Aces card.   
This Nieuport was pictured in Casoni airfield, Italy, early summer of 1918.
- A special skin folder with one Unidentified Nieuport 27 flown by 81a Squadriglia with a Aces card markings, serial number & pilot unknown.
- New textures for the N27_FAS cockpit with new italian instruments. 
- 2 New optional hangar screenS for 81a Squadriglia in 1920x1200 size. You will find this in the "HANGAR SCREEN" folder. 
To use it, you must drop or copy the jpg file in your N27_FAS aircraft main folder, next, edit your N27_FAS.ini file. and add this line:
[AircraftData]
HangarScreen=81HANGARSCREEN 01.jpg       <------ add this line to use the first option.
[AircraftData]
HangarScreen=81HANGARSCREEN 02.jpg       <------ add this line to use the second option.
__________________________________________________________________________________________________________
- I painted new textures for the cockpit, with a new "GLASS.tga" to complement all of them. The gauges & needles were made as close as possible to the real instruments.
- Releasing two versions: One in 1024x1024(JPG & TGA) and other in 2048x2048(JPG & TGA). 
- I set the 1024x1024(JPG & TGA) as standard for the planes. 
*OBS: If you are running a low-end computer I do not recommend the use of 2048x2048 cockpit textures.
__________________________________________________________________________________________________________
INSTALLATION INSTRUCTIONS:
FE2 INSTALLATION
(SKIN)
- Drop or copy the folder "N27_FAS" from mine "Aircraft" folder to your "Aircraft" folder. 
(DECALS)
- Drop or copy the folder "N27_FAS" from mine "decals" folder to your "decals" folder. 
*ATTENTION*
In order to work properly on your loadout menu option, this following lines, must to be COPIED into your "N27_FAS".ini file.
[TextureSetXXX]
Directory=81 Squadriglia
Name=81 Squadriglia
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=81 Squadriglia (Silver dope)
Name=81 Squadriglia (Silver dope)
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
[TextureSetXXX]
Directory=Carlo Corti
Name=Carlo Corti
Nation=Italy
Squadron=
Specular=1.800000
Glossiness=1.800000
Reflection=0.000000
Replace the (XXX) in the [TextureSetXXX] top line, with the appropriate number following your "N27_FAS.ini" file order for others skins that you have already installed before.
That's all.
__________________________________________________________________________________________________________
Credits:
- Julio Junqueira texture skins & decals markings for N27_FAS, cockpit and hangar.
- EmlD for the Cockpit 3D LODs.
__________________________________________________________________________________________________________
- Thanks to EmlD for the excellent Nieuport 27 model.
- Thanks to Stephen1918 and Crawford for help with information on the Nieuport's fuel gauge. 
- special thanks to CombatAce.com hosting the files.
__________________________________________________________________________________________________________
These textures are freeware; you are allowed to use it as you wish, but The names of all contributors listed here, must be added in any new released readmes. These textures may not in any way, be used in any payware additions. 
__________________________________________________________________________________________________________