Strike Fighters 1 Series by Thirdwire

This is a skin of the standard camo for Svenska Flygvapnet

This is a skin of the standard camo for Suomen Ilmavoimat

This is a skin of the standard camo for Flyvevabnet

This a skin of the standard camo for Ostereichische Luftstreitkrafte

Made this when I was skinning the Hustler. Decided to release it...Sorry it took so long. Thanks to Pasko and all involved. Enjoy, Pappy

A Desert Camo scheme for the recently released F-19 from Julhelm. This is a very high rez skin (2048") so for those of you with lower-end just re-size to 512" or 1024".
 
To use this skin simply right click on the file and select "Extract to DesertScheme". Then place the extracted folder into your F-19 folder and you're all set.
 
Feel free to use this skin for mod you may want to make, just notify me beforehand.
 
Enjoy and go fly!
 
Bibbolicious

Aggressor skin pack for the F-19 Stealth fighter/bomber by Julhelm. This pack represents 8 of the paint schemes used by the USN VFC-13 Saints adversary squadron.
 
Installation:
 
To install these skins you must first have the F-19 Stealth installed. Extract the main folder "F-19_Aggressors" to a temporary folder. Inside you will find separate rars for each skin. )I put each skin in its own rar to keep size down) Now extract each rar to its own folder. Place these separate skin folders into the F-19 folder and away you go. Don't worry about adding entries to the F-19.ini file, each skin has its own textureset.ini file.
 
This pack includes the paint schemes for the following aggressors of VFC-13:
 
No.00
No.05
No.10
No.15
No.23
No.24
No.31
No.47
 
Credits:
F-19 Stealth - Julhelm
VFC-13 Aggressor skins - bibbolicious
 
Feel free to use these skins for any repaints you may want to do, just make sure I'm credited for the original skins and Julhelm for the F-19.
 
P.S. For choosing each skin I have labelled them according to their aircraft number e.g. "VFC-13 No.15" etc. I know that this does not tell you the colour of the scheme, but don't worry, there's a colour patch included with each skin so its easy peasy.
 
Any problems or queries, don't hesitate to contact me, I can be found posting at the Simhq, Column5, Combatace and Thirdwire forums.
 
Have fun,
 
bibbolicious

Many thanks and credit to Julhelm and everyone involved with the F-19.
 
Special thanks to Bibbolicious for his help and advice.
 
Read Me included in the zip so please READ IT!

Requested skin for Allenjb422.
 
Many thanks and credit to Julhelm and everyone involved with the F-19.
 
Read Me file invluded in the zip so please READ IT!!

Put together a skin for Zu'r very cool Talon airframe.
 
ALL credit and many thanks to "Z" man for bringing this out!!!
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Here is a quick repaint of Zur's excellent F/A-37 Talon. It represents the 4th Fighter Squadron of the 388th Fighter Wing (my favorite USAF Squadron). The Talon is only an alpha at this stage but it's the best alpha I've seen!
 
I'm not sure if Zur will thik this texture is good enough for the final release, so here it is for anybody who is interested.
 
Thanks for this bird Dave!
 
Just paste the USAF folder into your Objects/Aircraft/Talon folder and fly!
 
 
Zur's Original readme:
 
 
"This aircraft is ALPHA… Which means not everything is finished and not everything is implemented… and nothing if final.
 
Q: Why did I release this in its alpha state? – Easy. I’m looking for some people who know how to paint skins… Of which I’m most definitely not.
 
If you’re up for the challenge, I’m looking for people to make skins within the following categories:
 
1.) Movie Based Scheme. (Default skin)
2.) USN. (Modern day scheme)
3.) USMC. (Modern day scheme)
4.) USAF. (Modern day scheme)
5.) Mercenary / what-If / “Other Nation” (Use your imagination!)
 
Please use the supplied templates judiciously. The panel lines etc. are there for my personal edification… feel free to move them, add more… what ever suites your desired look. My references were limited and I did what I could.
 
I’ve always been of the mindset that a good skin makes an okay model spectacular… DanW proved that to me time and time again.
 
Please send your submissions to zur@zur-tech.com The very best get to ride in pole position for each category in the final release package.
 
Notes:
 
1.) Cockpit is a placeholder while I work on the actual one… Don’t get attached to it.
 
2.) If you don’t see or hear the afterburner effect, I “borrowed” from the effect pack and elsewhere… don’t get your undies in a bundle… I intend to supply original ones upon final release.
 
3.) FM, DM, load out etc are all just trial stuff… again don’t get attached.
 
Download here: www.Zur-TECH.com
 
Fly… have fun… paint submit. Most of all have fun."

Put together a skin for Zu'r very cool Talon airframe.
 
ALL credit and many thanks to "Z" man for bringing this out!!!
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Put together a skin for Zu'r very cool Talon airframe.
 
ALL credit and many thanks to "Z" man for bringing this out!!!
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Put together a skin for Zu'r very cool Talon airframe.
 
ALL credit and many thanks to "Z" man for bringing this out!!!
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Here's a Tigerskin i knocked together for the excellent F/A 37 Talon , hope you like it.
There are no decals but all instructions (i think) are included. I really like this aircraft and i can't wait to see it in its final form. As with the rest of my skins, if you feel you can improve it,for instance by adding decals or whatever, then feel free and repost it if you do .If you want to use it some other way then just ask.
 
I also have a template i made for this, though a very simple one ,if anyone would like it.

This is a green camo for the A-10A Version 2.5 By WPNSSGT, based on the paintscheme of Mitch Janssen - HR A10 \'Europe\' by Guest, designed for LOMAC.
 
I missed a camouflage skin for the warthog and did this for me. Posting it is my way to aknowledge all the creators of mods for SF
 
Enjoy it
 
jagl04
 
Note: I have been advised that the first rar post was broken. Here is an Zip file which runs properly in my computer. My apologies

This is a desert camo for the A-10A Version 2.5
By WPNSSGT, based on the paintscheme of
Mitch Janssen - HR A10 \'desert\
designed for LOMAC.
 
Enjoy it
 
jagl04

This is a Syrian Air Force skin. Fictional squadron for a fictional plane.
 
 
Thanks and all credit to Zuranski for the F/A-37 model and templates.
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Well I did it for us Brits so i thought it was only fair to do the same for our American cousins,hope you like.
Copy the folder to the Talon files and alter the textures in the usual way then have fun. Thx again to the creator of this amazing aircraft.

This is a IAF skin. Fictional squadron for a fictional plane.
 
 
Thanks and all credit to Zuranski for the F/A-37 model and templates.
 
As with all my skins you cannot use them in any project without my prior consent.
(Just PM me and I bet I'll say yes... )
 
Read Me file included in the the zip so please READ IT!!!!!

Here's a fun Talon skin that i put together hope you like it . Just copy the folder to the Objects/Aircraft/Talon folder and change the Texture in the usual way.

This is a green camo for the A-10A Version 2.5
By WPNSSGT, based on the paintscheme of
Mitch Janssen - HR A10 \'Europe\' by Guest,
designed for LOMAC. A shark mouth has been added
 
Enjoy it
 
jagl04

A "Dazzle" camo for the Talon

A mottled camo for the Talon

!st of several new skins i've put together for the Talon , all just for fun. I've added variations of the colours so you can play about with them as you like.