180 files
-
"Civilian" Gas Truck
By Wrench
Civilian Fuel Truck
= SF/Wo* & SF2 series Games (Any and All!) =
A simple repaint of the stock Zil Fuel truck into something more 'civilian' looking for use around airports and such like. The templates are supplied (they're 1024x, so easy to work with) to allow other skinners the opportunity to create other skins. Also supplied, is a red Phillips 66 skin, easily swapped.
The inis supplied herein are in ANSI format, allowing for use in both 1stGen SF/Wo* and SF2 series.
See the 'To Install' section below for more notes, and how to add to Terrains as a seperate item via _types and _targets editing.
As always, fairly easy to follow, yet detailed install instructions are included. Please read them! They'll all add a little color to an otherwise drab setting.
Happy Gassing!
wrench
kevin stein
131 downloads
(1 review)0 comments
Updated
-
"Taliban Grouse"
By EricJ
This is a "What If" nation missile system based off of the real SA-18 Grouse (or what I could find though internets sources).
It is set for the "Taliban" nation for my Afghanistan install but can be adapted of course for any map or nation:
[Nationxxx]
Name=Taliban
DisplayName=Taliban
Alignment=ENEMY
Mercenary=TRUE
PilotNameList=NamesMercs.lst
RankList=RanksUSAF.lst
CallsignList=CallsignsUS.lst
Formation.Fighter=USFighter
Formation.Attack=USFighter
Formation.Bomber=USBomber
Formation.Transport=USBomber
Formation.Tank=USTank
Formation.MobileAD=USAD
PilotTrainingStandard=EXCELLENT
GenderRatio=0
DebriefSuccessMusic=DebriefSuccess.wav
DebriefFailMusic=DebriefFail.wav
DebriefKilledMusic=DebriefKilled.wav
SpeechFile=USAFSpeech.cat
SpeechTextFile=USAFSpeechText.str
StartDate=1994
It uses Pasko's "SAM Gunner" since I have no modeling skills and is setup for SF2. It can be of course adapted for SF1 but that requires a bit of work that can be found in the SF2 Knowledge Base and is a drag and drop as all files and folders are already organized.
Afghanistan rules of thumb:
Kandahar-Shindand-Herat-Qala I Naw "ring" stay above 24,000ft MSL + for traveling. When you break that (usually 23,000 ft) you may get shot at. Other areas roughly 22,000 ft MSL + is a good altitude to stay above but again use flares conservatively. It's not very accurate but if enough are fired you will get shot down. I've seen earlier versions of this shred SEAD flights.
This is strictly for What If scenarios or installs rather than real world setups as so far there is no heavy use of SAMs in-country.
98 downloads
(0 reviews)0 comments
Submitted
-
122 mm howitzer 2A18 (D-30)
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
122 mm howitzer 2A18 (D-30) Update by compufat
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
//Please add to Soundlist under Flight directory and change the XXX with the correct number
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for updating the data file and the texture.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
120 downloads
(0 reviews)0 comments
Updated
-
2S6M Tunguska
By EricJ
Derived from this: https://www.turbosquid.com/3d-models/3ds-sa19-tunguska-vehicle/609893
Model work (implementing in SF2): Razvan Stanciu
Ini help: yakarov79
I mainly did Texture work and included four skins for the vehicle. The default color scheme and three others (Green, Tan, and Paran) are for use in your game.
All necessary files are included and simply drop in your mod folder. Can be found under 2S6M Tunguska for the Mission Editor.
125 downloads
(1 review)0 comments
Submitted
-
3 different ANTPS-77 Tactical Radar models
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
3 different ANTPS-77 Tactical Radar models each with 2 textures.
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
add this to your soundlist.ini under the Flight folder if you don't have it listed there.
SoundFileXXX=ANTPSRadialEngine
[ANTPSRadialEngine]
Priority=LOW
3DSound=TRUE
Looped=TRUE
NumBuffers=2
DopplerEffect=FALSE
MaxDist=250.000000
MinDist=10.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=50
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
This was requested by my friend strahi.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
242 downloads
(1 review)0 comments
Updated
-
3 More Airbase "Equipments"
By Wrench
More Airbase Goodies
= SF/Wo* & SF2 series Games (Any and All -hopefully*!) =
A few more pieces of equipment, to place around airfields or bases, or other 'locations of interest'. The items are:
Bulldozer (-original creator unknown, as it comes from waay back on the WW2 terrains)
Road Grader
Steamroller (these 2 by Sundowner)
It should be noted at this time, these are NOT GroundObjects, like the yellow fuel truck recently released, but TERRAIN objects, that will need hand placement on your terrain of choice. Instructions are below in the "To Add To A Terrain" section.
As always, fairly easy to follow (for Terraformers/Targeteers), yet detailed install instructions are included. Please read them!
*note: as the grader and roller have been built in late model MAX, they may not work in SF/Wo* games. This has NOT been tested*
With special thanks to Sundowner!!
Enjoy!
wrench
kevin stein
292 downloads
-
3 MT-LB models and 122-mm howitzer D-30H
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
there are 3 models for the MT-LB and 1 model for 122-mm howitzer D-30H
all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX]
Name=GK-MT-LB
FullName=GK-MT-LB
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-MT-LB
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-MT-LB-Destroued.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
[TargetTypeXXX]
Name=GK-MT-LB-D30H
FullName=GK-MT-LB-D30H
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-MT-LB-D30H
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-MT-LB-Destroued.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
[TargetTypeXXX]
Name=GK-MT-LB-WT
FullName=GK-MT-LB-WT
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-MT-LB-WT
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-MT-LB-Destroued.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
[TargetTypeXXX]
Name=GK-D-30H
FullName=GK-D-30H Artillery
TargetType=MISC
ActiveYear=0
TargetValue=100
UseGroundObject=TRUE
GroundObjectType=GK-D-30H
RepairRate=0.555
StartDetectChance=20
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=4000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=tank_destroyed.LOD
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and susierucy for the skins
and many thank to yakarov79 for sharing his file to study, I learned a lot from his file, therefore my skinning have improved and I started using UVLayout and that is a big improvement to my work
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Big thanks to susierucy for her help with making coloring and making the skin form me. https://susierucy.com
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
166 downloads
-
Afghan FoxHole with Stinger FIM92 Missile
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan FoxHole with Stinger FIM92 Missile
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You can use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some pictures and information.
https://www.mixamo.com/ for using their free character making and rigging.
also using a free net model to use as references
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
61 downloads
(0 reviews)0 comments
Submitted
-
Afghan SA-7 site
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan SA-7 site.
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Yakarov79 for making the SA-7 launcher and missile models as well as testing. thank you again, my friend
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some photos and information.
https://www.mixamo.com/ for using their free character making and rigging.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
98 downloads
-
Afghan with SA-7
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan with SA-7
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Yakarov79 for making the SA-7 launcher and missile models as well as testing. thank you again, my friend
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some photos and information.
https://www.mixamo.com/ for using their free character making and rigging.
also using free net model to use as references
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
78 downloads
(0 reviews)0 comments
Updated
-
Afghan with SA-7 FoxHole
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan with SA-7 FoxHole
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Yakarov79 for making the SA-7 launcher and missile models as well as testing. thank you again, my friend
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some photos and information.
https://www.mixamo.com/ for using their free character making and rigging.
also using a free net model to use as references
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
72 downloads
-
Afghan with Stinger FIM92 Missile
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan with Stinger FIM92 Missile
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You can use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some pictures and information.
https://www.mixamo.com/ for using their free character making and rigging.
also using a free net model to use as references
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
58 downloads
(0 reviews)0 comments
Submitted
-
Afghan with Stinger FIM92 Missile site
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
Afghan with Stinger FIM92 Missile site
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You can use this model and everything included for personal non-profit use for Strike fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Credit goes to https://www.textures.com as I use many of their photos to create the skins.
Google for some pictures and information.
https://www.mixamo.com/ for using their free character making and rigging.
also using a free net model to use as references
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
Extra.
If you want to have the Afghan show in the mission editor
[MissionData]
NationName=Afghanistan
ServiceStartYear=1970
ServiceEndYear=1995
//GroundObjectRole=AAA <-----
GroundObjectRole=MISC <------
Availability=COMMON
Exported=TRUE
ServiceStartYear=1975
ExportEndYear=2030
ExportAvailability=COMMON
53 downloads
(0 reviews)0 comments
Updated
-
Air Base Approach Light
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Air Base Approach Light
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
Virgin 1.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game."
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
50 downloads
(0 reviews)0 comments
Submitted
-
Air Base Ground Support Equipment
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Air Base Ground Support Equipment
1- A-M32C-17
2- M32A-60A
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
Virgin 1.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game."
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
54 downloads
(0 reviews)0 comments
Updated
-
Air Base Precision Approach Radar
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Air Base Precision Approach Radar
All my files should include the Strike Fighters 2 Series game file (.LOD) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
add to Terrains file for example IraqWA_03_TYPES.INI under the IraqWA_03 so it will show up for you to add to the Terrains by using TargetAreaEditor
replace the XXX with the correct number sequins from your _TYPES.INI file
[TargetTypeXXX]
Name=AAS-Surv-Radar
FullName=GK-AAS-Surveillance-Radar
ModelName=GK-AAS-Surveillance-Radar.lod
TargetType=RADAR
ActiveYear=1960
TargetValue=200
UseGroundObject=FALSE
DamagePoint=1.0
ArmorValue=0.0
ArmorType=0
RepairRate=0.555
StartDetectChance=80
StartIdentifiedChance=20
IncreaseDetectChanceKey=10
MaxVisibleDist=6000.0
DamagedModel=
DestroyedEffect=SmallFire
DestroyedModel=asr_destroyed.LOD
SecondaryEffect=SmallExplosionEffect
SecondaryChance=50
AnimationID=1
AnimationTime=4.0
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
Virgin 1.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game."
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
47 downloads
(2 reviews)0 comments
Updated
-
Airport Items 2018
By krfrge
Airport Items 2018 Krfrge - Apr 2018
Here are three pieces of 'eye candy' to support commercial aircraft on your commercial airfield of choice. See ***** note below.
Place these 3 folders in your xxx_terrain folder.
For example: F:\SFP\StrikeFighters2 WestPAC\Terrains\WestPAC3K
Airport Cargo Trailer
Airport Baggage Cart
Airport Baggage Tractor
Add these entries into your terrain_TYPES.ini
[TargetTypexxx]
Name=AirCgoTrailer
FullName=Air Cargo Trailer
ModelName=AirCgoTrailer.LOD
TargetType=MISC
ActiveYear=1970
TargetValue=100
UseGroundObject=FALSE
DamagePoint=5.0
ArmorValue=0.0
ArmorType=0
RepairRate=0
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=1000.0
DamagedModel=
DestroyedEffect=SmallOilFire
DestroyedEffect=
SecondaryEffect=SmallBombEffect
SecondaryChance=
[TargetTypexxx]
Name=BagCart
FullName=Baggage Cart
ModelName=BagCart.LOD
TargetType=MISC
ActiveYear=1970
TargetValue=10
UseGroundObject=FALSE
DamagePoint=5.0
ArmorValue=0.0
ArmorType=0
RepairRate=0
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=10000.0
DamagedModel=
DestroyedEffect=SmallOilFire
DestroyedEffect=
SecondaryEffect=SmallBombEffect
SecondaryChance=
[TargetTypexxx]
Name=BagTractor
FullName=Airport Baggage Tracotr
ModelName=BagTractor.LOD
TargetType=MISC
ActiveYear=1970
DamagePoint=10
ArmorValue=3
ArmorType=3
TargetValue=25
UseGroundObject=FALSE
RepairRate=0.150
StartDetectChance=50
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=15000.0
DamagedModel=
DestroyedEffect=
DestroyedModel=
SecondaryEffect=SmallOilFire
SecondaryChance=
***** Disclaimer - These are free 3d models I pulled down from Cadnav. I simply converted them into SF .LOD format using Blender and Mue's LOD exporter pug-in. *****
Any issues please contact me here at CombatAce.
68 downloads
- ground objects
- airport support items
- (and 1 more)
(0 reviews)0 comments
Submitted
-
Alternative Armour Pack
By SFP1Ace
Alternative Armour Pack
This armour pack is my humble attempt to make ground war somewhat more "accurate". It's been created with SF2:E/NF4+ in mind, but it should be easy to adapt it to other mods/installs. Several "new" tanks have been created, but due to my lack of modelling skills they're only ini edits. Other tanks (both TW and community ones) have been tweaked.
"New" stuff:
- Chieftain mk2, mk5 & mk11 (edited stock Centurions);
- 120MM L11 gun for Chieftain, parameters optimized for the L15 APDS round;
- Leopard 1 (edited stock Leopard 1A1);
- M1 IP (edited M1 Abrams from NF4+);
- M60A1 AOS (edited stock M60A1);
- M60A3 (edited Pasko's & Kesselbrut's M60A3)
- T-80B (edited T-80BV by SWS, BPAo, Fubar512 & 331Killerbee)
Modified stuff:
- 120MM L44 customized for '80s M829 APFSDS round);
- Centurions (mk5,6,8,10,13), Leopard (1A1-1A5), Leopard 2A4, M1, M1A1, M48 (A2 & A3), M60A1, T-54, T-55, T-62A, T-72A, T-80BV;
Modifications inlclude following changes/corrections:
- tank's weight;
- armor values have been changed to RHA equivalents against Kinetic Energy rounds. Angled plates have been taken into account whenever possible. Late tanks (T-72, T-80, Abrams, Leo 2) armor RHA values have been greatly influenced by data presented in "Armor Basics" created by Paul Lasowski & included in Steel Beasts;
- number of gun rounds carried;
- presence (or lack thereof) of nightsight, gun stabilization;
- rangefinder & ballistic computer values;
- service entry dates.
I "hope" all this changes enhance accuracy but please bear in mind that:
- SF series is about flying and the ground war aspect is kind off limited;
- I'm no guru, I pulled the data from the Internet, therefore it might not be actually accurate, lol;
- there's no easy way to calculate RHA values, info on the net can vary significantly from source to source; if you have some good/reliable literature where these are well/reliably documented for many cold war tanks and their variants/sub-types you're welcome to share ;)
If you find any bugs/errors, please let me know so I can correct it.
INSTALLATION:
Back up your stuff first, so you can revert changes if you don't like them! Unzip archive and copy Objects folder to your mod directory (usually "C:\Users\Username\Saved Games\ThirdWire\StrikeFighters2 Europe\" when using Vista/7). If you want M60A3 & T-80B\BV to show up you'll need to download them from CA (I didn't include lod files or textures). M60A3 is included in US Armour Pack, T-80BV is, well T-80BV. For T-80B copy T-80BV lod files into it's directory. If you don't have NF4+ installed you'll have to get the M1 Abrams from the US Armour Pack as well. And obviously if you want all the "new" stuff to show up in a campaign, you'll have to modify campaign data file. For starters I suggest replacing British Division's Leos with Chieftains in 1979 & 1986 campaigns.
If you're still lost PM me :).
Enjoy!
SFP1Ace
CREDITS:
Pasko & Kesselbrut (M60A3)
SWS, BPAo, Fubar512 & 331Killerbee (T-80BV)
NF4+ Team/Kesselbrut (M1 Abrams)
428 downloads
-
ASTROS
By strahi
This is a model of the MLRS system of the Brazilian army. Anyone who has a desire can freely further develop it.
91 downloads
(0 reviews)0 comments
Updated
-
Blowpipe MANPADS
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Blowpipe is a man-portable (MANPADS) surface-to-air missile
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
If you need any further help, please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included for personal non-profit use for Strike Fighters 1 and 2. You need to contact me for permission to use outside of this scope.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
compufat for making the Blowpipe texture and missile.
US soldier is a free model from the net.
Google for some photos and information.
Finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
Mixamo
If you need any assistance don't hesitate to get in touch with me at
gkabs@gkabs.net
gulfknights.net
76 downloads
(0 reviews)0 comments
Submitted
-
BM-21 Grad on Ural Track
By bazillius
Grad. And nothing to say any more
Using:
1. Unpack.
2. Move to your MOD folder
3. Use Mue's tool to place it on your map or use mission editor. Grads will engage closest targets which can reach.
The transport variant is for apearing in Armed Recon Missiao and will not fire. Its only for bombing from highs)
~<~✿ ~<~✿ ~<~✿
THANKS to:
Mue for his Lod wiever tool
TW for the Game
WhiteBoySamurai for the rocket
✰✰✰✰✰✰✰✰✰
License/Rights:
For free sharing and modifying
✰✰✰✰✰✰✰✰✰
204 downloads
-
BM-30 Smerch
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
https://gulfknights.net
What's included:
Two BM-30 Smerch models with 3 textures also 2 new sound files
All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
Installation:
Copy files to their proper folder
add this to your soundlist under the Flight folder if you don't have it listed there.
[SoundList]
SoundFilexxx=9M55K
SoundFilexxx=MilitaryTruck
[9M55K]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=TRUE
NumBuffers=4
MaxDist=2500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
[MilitaryTruck]
Priority=NORMAL
3DSound=TRUE
DopplerEffect=TRUE
NumBuffers=4
MaxDist=2500.000000
MinDist=400.000000
InsideConeAngle=360
OutsideConeAngle=360
ConeOutsideVolume=100
Note Change the XXX with the last number in your soundlist
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
1.0.0
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
Third Wire for making this outstanding game.
Credit goes to https://www.textures.com as I use a lot of their photos to create the skins.
Google for some photos and information.
And finally, not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 PrO
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
gulfknights.net
130 downloads
- bm-30-smerch
- bm-30
- (and 2 more)
-
BTR-40
By GKABS
Hello and thank you for downloading my work.
https://gkabs.net
What's included:
BTR-40 model
All my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
Installation:
Copy the folder to Objects/GroundObject and the falowing to _TYPES.ini file
[TargetTypeXXX] <-------- Change to the next number at the bottom of you types listing
Name=SovietBRDM
FullName=BRDM
TargetType=MISC
ActiveYear=0
TargetValue=0
UseGroundObject=TRUE
GroundObjectType=GK-BTR-40
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
SecondaryChance=50
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and skins
yakarov79 and Crusader for Sending the model file to study big help.
Coupi for sending me a great link for information and a photo of the model.
http://www.krasnayazvezda.com/terre/materiels/transport_troupes/btr40.php
Stratos for sharing with me the PSP Weathering Layer file
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
Many thanks to you all.
Google for some photos and information.
And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
Software used:
3d Max 2009
UVLayout v2 Pro
Substance Painter
Adobe Photoshop
If you need any assistance please contact me at
gkabs@gkabs.net
120 downloads
(0 reviews)0 comments
Updated
-
BTR-40_RU.7z
By russouk2004
README Included...
BTR-40-RU Turret version...From a freeware model,author unknown....
Named so to avoid conflict with the BTR-40 by GKABS
Add entry below to Terrain (Terrainanmehere)_Types you use it in,Then drop folder BTR-40_RU ,into your Objects\Groundobjects folder....replace XXX with next consequtive numbers one in the types ini file.
Drop Guns folder into \Objects folder to add the 7.62MM_SGMB..and if required add with gun editor to ensure it works.
[TargetTypeXXX]
Name=SovietBRDM
FullName=BRDM
TargetType=MISC
ActiveYear=0
TargetValue=0
UseGroundObject=TRUE
GroundObjectType=BTR-40_RU
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
SecondaryEffect=VehicleFireEffect
SecondaryChance=50
If you do not want the specular mapping as is...just delete the following lines from Ini and texture.ini
to reduce it to bump mapping only..
Specular=0.200000
Glossiness=0.600000
Reflection=0.000000
This model is freeware,and not to be used for any payware at all...NOT to be uploaded outside of CombatAce.com unless permission requested first.
Feel free to mod this ...
No templates or other skins as yet.
Unfortunatll some parts are mapped to same mesh (mirrored) I have seperated some to allow some of the numbers and badges to show properly...
Credit to GKABS for allowing use of his destroyed LOD ty
have fun shooting this....
Russouk
65 downloads
-
BTR-50
By GKABS
Hello and thank you for downloading my work.
What's included:
all my file should include the Strike Fighters 2 Series game file (.LOD) and the texture required.
there are 2 skins for the model and I have made a bump file.
Installation:
Copy folder to Objects/GroundObject and the following to _TYPES.ini file
[TargetTypeXXX]
Name=BTR-50
FullName=BTR-50 APC
TargetType=MISC
ActiveYear=0
TargetValue=50
UseGroundObject=TRUE
GroundObjectType=GK-BTR-50
RepairRate=0.555
StartDetectChance=0
StartIdentifiedChance=0
IncreaseDetectChanceKey=0
MaxVisibleDist=8000.0
DestroyedEffect=SmallRocketGroundExplosion
DestroyedModel=GK-BTR-50-Destroued
SecondaryEffect=VehicleFireEffect
SecondaryChance=100
If you need any further help please read the Knowledge Base at:
https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
LICENSE:
You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
gkabs@gkabs.net
Credit goes to the following:
GKABS for creating the model and the skins
Credit goes to https://www.textures.com as a use a lot of their photos to create the skins.
The gunner - skin form SP1
And finally not to forget the wonderful site of https://combatace.com and all the nice member's and their dedicated support for this game.
If you need any assistance please contact me at
gkabs@gkabs.net
146 downloads
(0 reviews)0 comments
Updated
Sign in to follow this
Followers
0
-
Download Statistics
14,206
Files12,485
Comments26,858
Reviews