+Stephen1918 1,474 Posted September 7, 2014 (edited) Whiteknight asked for the Caudron G.4 quite some time ago. I've been working on it off and on for a few months. The model is done, except for the gunner, whose legs still need some work. I made a new pilot because the stock pilot wouldn't fit into that narrow cockpit. I'm working on the skins and the cockpit model now. Edited September 27, 2014 by Stephen1918 5 Share this post Link to post Share on other sites
+ojcar 157 Posted September 7, 2014 Wov! Whata nice surprise! 1 Share this post Link to post Share on other sites
+Geezer 3,569 Posted September 7, 2014 (edited) Lovely! A fascinating aircraft with loads of character. You did a nice job with the unusual shape of the airfoil. Rene Fonck began his flying career in a G.4 and, after shooting down a German plane with the overwing Lewis gun, was transferred to fighters. Edited September 7, 2014 by Geezer 1 Share this post Link to post Share on other sites
+whiteknight06604 935 Posted September 7, 2014 OMG the G.3 and G.4 were some of my all time favorites. I had completely forgot I asked for this. This is such a great surprise to me. Thank you so much! 1 Share this post Link to post Share on other sites
dsawan 624 Posted September 7, 2014 top notch! even USA was an operator of this type; http://en.wikipedia.org/wiki/Caudron_G.4 Share this post Link to post Share on other sites
+Stephen1918 1,474 Posted September 7, 2014 The Real World is keeping me pretty busy, so it will be 2 weeks or more before this is finished. I've been trying hard to find a balance between high level of detail and manageable file size. The twin engines and fluted wing edges really used up memory, so I've been doing a lot of tweaking. The G.4 was used by a lot of nations, I hope to at least have decal sets for France, Belgium, Italy, and Russia. 1 Share this post Link to post Share on other sites
dsawan 624 Posted September 7, 2014 take your time. no rush. Share this post Link to post Share on other sites
33LIMA 972 Posted September 7, 2014 Lovely job! 1916 in FE is about to get more interesting. RNAS markings would be appropriate, too. Share this post Link to post Share on other sites
jeanba 1,920 Posted September 7, 2014 Great, one of my favorite plane ! Share this post Link to post Share on other sites
extremeone 13 Posted September 7, 2014 Wow great addition, fantastic. Share this post Link to post Share on other sites
+gterl 1,214 Posted September 8, 2014 YESSSS!! Fantastic! Thank you Share this post Link to post Share on other sites
+Stephen1918 1,474 Posted September 12, 2014 The cockpit is built and I'm working on the skins. Notice that there are two throttles, and fuel gauges on the engine nacelles. I still have a lot of work to do on the data file, and I need to make the LODs. 4 Share this post Link to post Share on other sites
+Stephen1918 1,474 Posted September 26, 2014 I uploaded the Caudron G.4 today. It includes four skins and three bomb loadouts. My thanks to Ojcar for once again making a great FM for the plane - this makes 36 planes we've made for First Eagles. My thanks also to Whiteknight and Jeanba for help with the research. 1 Share this post Link to post Share on other sites
extremeone 13 Posted September 27, 2014 Thanks Stephen, awesome plane, and great model. 36 planes! No kidding, you and Oscar deserve medals! Personally of all of them, the ones I most appreciate are the early war 2-seaters - russian, austro-hungarian, british, french and german of which there must be now 12 or more. A fascinating collection for a ww1 flying enthusiast. 1 Share this post Link to post Share on other sites
+Stephen1918 1,474 Posted September 27, 2014 (edited) Extremeone alerted me to some minor problems with the Caudron, I have uploaded a new version with corrections. They are both very minor - In the ini file, I only had two LOD levels, so the plane disappears when you get about 200 meters away. All the LOD files were there, I just didn't have them in the ini file. LOD003 should be at 1000, and LOD004 should be at 7000. In FE2, the pilot and his skin have to be put into the Objects/Pilots folder, not in the Aircraft folder as I instructed. The installation for FE1 is correct. Version 2 fixes these problems. Edited September 27, 2014 by Stephen1918 Share this post Link to post Share on other sites
+gterl 1,214 Posted September 28, 2014 Great stuff....the Martinsyde AND the Caudron. Fantastic work! Thx a million!!! 4 Share this post Link to post Share on other sites
+Geezer 3,569 Posted September 30, 2014 (edited) gterl - I noticed that the upper wing center section of your Martinsyde is gray. That's one of those infuriating problems that has no obvious cause. Stephen1918 experienced the same thing during testing, but ojcar and I did not - our Martinsydes ran OK. The center section should be skinned like shot below. Has anyone else experienced a similar problem? Edited September 30, 2014 by Geezer Share this post Link to post Share on other sites
Mike1 0 Posted September 30, 2014 Thanks Stephen, awesome plane, and great model. 36 planes! No kidding, you and Oscar deserve medals! Personally of all of them, the ones I most appreciate are the early war 2-seaters - russian, austro-hungarian, british, french and german of which there must be now 12 or more. A fascinating collection for a ww1 flying enthusiast. I'll delurk to second that, Stephen's models are great and cover a nice variety of subjects. I admit to having a partiality to the two seaters as well, in particular the German and Austrian C types. My current favourites are the Phonix and UFAG C.1's, but I also like the various Albatros machines as well. Keep up the good work, Stephen! Mike. Share this post Link to post Share on other sites
gambit168 27 Posted September 30, 2014 Wow lovely Thx I've always had a soft spot for the G4first time i've looked in here in a long time , great to see you are still active Stephen Share this post Link to post Share on other sites
+gterl 1,214 Posted October 6, 2014 Martinsyde upper wing center section fixed: - Opened the LODs with HEX editor - Changed every reference to the upper wing center section to another new bmp fantasy name - Renamed the bmp's - Works now Root-Cause? I've no idea! All the initial references, file formats, etc. were correct. I've just renamed the bmp's to something else...go figure rgds Share this post Link to post Share on other sites
+Geezer 3,569 Posted October 6, 2014 (edited) Martinsyde upper wing center section fixed: - Opened the LODs with HEX editor - Changed every reference to the upper wing center section to another new bmp fantasy name - Renamed the bmp's - Works now Root-Cause? I've no idea! All the initial references, file formats, etc. were correct. I've just renamed the bmp's to something else...go figure rgds Thanks for the info! Stephen1918 and I have been trying to fix this problem for a week, with no success. Question: are you running FE1 or FE2? There may be a connection, because I cannot duplicate the malfunction (I run FE2). However, Stephen has always experienced the problem (he runs FE1). Edited October 6, 2014 by Geezer Share this post Link to post Share on other sites
+Geezer 3,569 Posted October 6, 2014 Gterl - thanks again for discovering the fix for the center section problem. I made changes, and sent the revised Martinsyde to Stephen1918 for testing in FE1. He just notified me that it works OK, so I've uploaded a revision to the CA downloads. There was never a problem in FE2, and now there is no problem in FE1, so FE Gold should be good too. 1 Share this post Link to post Share on other sites
