Jump to content

Recommended Posts

Posted

Installing one of MyTai's F-4B skins for SF1 to SF2 F-4B_67. Following correct SF2 file path for decals; all show up except nose number only on left side. How do I fix this?

 

 

[Decal001]
MeshName=fuselage_P
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\nsl
Position=1.35,-0.17
Rotation=0.0
Scale=8.625
DecalMaxLOD=3

[Decal002]
MeshName=fuselage_P
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\nsr
Position=1.35,-0.17
Rotation=0.0
Scale=8.625
DecalMaxLOD=3

[Decal003]
MeshName=wing_left_outer
DecalLevel=0
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
Position=-4.0,-0.94
Rotation=37.5
Scale=3.2
DecalMaxLOD=3

[Decal004]
MeshName=wing_right_outer
DecalLevel=0
DecalFacing=BOTTOM
FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
Position=4.0,-0.94
Rotation=37.5
Scale=3.2
DecalMaxLOD=3

[Decal005]
MeshName=splitter_plate_left
DecalLevel=3
DecalFacing=LEFT
FilenameFormat=kill
Position=5.995,-.141
Rotation=00.0
Scale=0.75
DecalMaxLOD=2

[Decal006]
MeshName=vertical_stabilizer
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
Position=-5.55,1.74
Rotation=0.0
Scale=6.0
DecalMaxLOD=3

[Decal007]
MeshName=vertical_stabilizer
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
Position=-5.55,1.74
Rotation=0.0
Scale=6.0
DecalMaxLOD=3
Reverse=TRUE

[Decal008]
MeshName=rudder
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
Position=-5.55,1.74
Rotation=0.0
Scale=6.0
DecalMaxLOD=3

[Decal009]
MeshName=rudder
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFT
Position=-5.55,1.74
Rotation=0.0
Scale=6.0
DecalMaxLOD=3
Reverse=TRUE

[Decal010]
MeshName=vertical_stabilizer
DecalLevel=1
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFR
Position=-5.85,1.75
Rotation=0.0
Scale=2.10
DecalMaxLOD=3

[Decal011]
MeshName=vertical_stabilizer
DecalLevel=1
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\NFL
Position=-5.85,1.75
Rotation=0.0
Scale=2.10
DecalMaxLOD=3

[Decal012]
MeshName=wing_left_inner
DecalLevel=0
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
Position=-4.0,-0.94
Rotation=37.5
Scale=3.2
DecalMaxLOD=3

[Decal013]
MeshName=wing_right_inner
DecalLevel=0
DecalFacing=BOTTOM
FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
Position=4.0,-0.94
Rotation=37.5
Scale=3.2
DecalMaxLOD=3

[Decal014]
MeshName=fuselage_P
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=f-4b_67\pacusnvf151 71\D\b
Position=-3.40,2.20
Rotation=0.0
Scale=5.0
DecalMaxLOD=3

[Decal015]
MeshName=fuselage_P
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=f-4b_67\pacusnvf151 71\D\b
Position=-3.38,-1.0
Rotation=0.0
Scale=5.0
DecalMaxLOD=3

[Decal016]
MeshName=fuselage_front
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3

[Decal017]
MeshName=fuselage_front
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3
Reverse=TRUE

[Decal018]
MeshName=canopy_front_outer
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3
Reverse=TRUE

[Decal019]
MeshName=canopy_front_outer
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3

[Decal020]
MeshName=canopy_rear_outer
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3
Reverse=TRUE

[Decal021]
MeshName=canopy_rear_outer
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\bln
Position=7.0,0.0
Rotation=0.0
Scale=10.0
DecalMaxLOD=3

[Decal022]
MeshName=fuselage_front
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\ls
Position=7.50,-0.3
Rotation=0.0
Scale=5.80
DecalMaxLOD=3

[Decal023]
MeshName=fuselage_front
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=f-4b\pacusnvf151 71\D\rs
Position=7.50,-0.3
Rotation=0.0
Scale=5.80
DecalMaxLOD=3

[Decal024]
MeshName=spoiler_left
DecalLevel=0
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\usa
Position=-4.0,-0.94
Rotation=37.5
Scale=3.2
DecalMaxLOD=3

[Decal025]
MeshName=flap_inner_right
DecalLevel=2
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\f
Position=2.38,-1.56
Rotation=-14.0
Scale=0.50
DecalMaxLOD=4

[Decal026]
MeshName=flap_inner_left
DecalLevel=2
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\f
Position=-2.38,-1.56
Rotation=14.0
Scale=0.50
DecalMaxLOD=4

[Decal027]
MeshName=rudder
DecalLevel=2
DecalFacing=RIGHT
FilenameFormat=F-4B_67\pacusnvf151 71\D\fpr
Position=-7.17,2.18
Rotation=0.0
Scale=0.3
DecalMaxLOD=4

[Decal028]
MeshName=rudder
DecalLevel=2
DecalFacing=LEFT
FilenameFormat=F-4B_67\pacusnvf151 71\D\fpl
Position=-7.17,2.18
Rotation=0.0
Scale=0.3
DecalMaxLOD=4

[Decal029]
MeshName=wing_right_outer
DecalLevel=0
DecalFacing=TOP
FilenameFormat=F-4B_67\pacusnvf151 71\D\NL
Position=4.90,-1.7
Rotation=-37.5
Scale=2.0
DecalMaxLOD=3

Posted

i'm surpriesed you got them to work at all. The f-4 have been remapped since 1stGens; you'll need to use the latest decal ini, properly edited, to get them positioned correctly.

I had to do this on ALL Mytai's Phantoms. It's not hard, just a pain in the ass. Also, check for the proper Level= statements -- some are NOT correct

also -- double check the statement for the fuselage_front (right). I think you'll see the mistake right off

Posted

If you learn to work with the LOD viewer provided by one of our esteemed collegue, it will be more easier to fix such kind of problem. The LOD viewer give you a tighter grip of moving things around a plane like decals with very great precision.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..