Environmental Mods

Al igual que en terreno de europa, darle algo de detalle al suelo.

97 downloads

(0 reviews)

0 comments

Submitted June 25, 2009

Buildings_for_Tunisia_WWII_V1.0

Un poco de detalle extra al hacer un vuelo rasante sobre Tunez...
Proximamente: "Buildings&trees for Battle of Britain" y "EuroWW2 V2.0"

103 downloads

(0 reviews)

0 comments

Submitted June 25, 2009

Buildings&trees for Battle of Britain

Bueno, como habia comentado, aqui esta la oportunidad de salir de debajo de esos impresionantes globos alabeando por las "calles" de Londres... No es perfecto, pero espero que os guste.

130 downloads

(0 reviews)

0 comments

Submitted June 30, 2009

Buildings&trees for Battle of Britain V1.1

Quedan corregidos un par de estupidos errores (la ley del cortapega) en los bordes de las ciudades. Tambien he editado y retocado un par de tiles que no acababan de gustarme...

206 downloads

(1 review)

0 comments

Submitted July 5, 2009

Buildings&trees for EuroWW2

Me encanta el mod EuroWW2, pero el terreno me parecia un poco soso visualmente, asi que me he puesto manos a la obra para darle algo de atractivo visual. Espero que os guste.

152 downloads

(0 reviews)

0 comments

Submitted June 23, 2009

Buildings&trees for EuroWW2 V2.0 prewiew

Bueno, empece intentando llenar un poco, el suelo de este estupendo terreno, y al final lo estoy "repintando" entero. Estoy usando para ello los magnificos tiles para Germany de Brain32. Todavia no esta terminado, pero cuelgo unas capturas de pantalla a ver que os parece. Se agradecen las sugerencias...

108 downloads

(0 reviews)

0 comments

Submitted July 5, 2009

Buildings&trees_for_EuroWW2_SPRING

Repintado completo de este magnifico terreno, usando el estupendo tilest de Brain32 para Germany. No me ha quedado perfecto, pero creo que luce muy bien... espero que os guste!

143 downloads

(1 review)

0 comments

Submitted July 19, 2009

Buildings&Trees_for_korea

Instalation: unzip in terrain folder.

Important: You must have instaled "New Korean Tile set based on Deuce's Enhanced WoV tiles" by "Steve T".!!!!!!
You can find this file in combatace, downloads, terrain mods, tilesets. And obiously Korea terrain...

Como siempre, agradecer a TODOS vuestro trabajo, Especialmente a CA_STARY (autor de la mayoria del material que he utilizado),
por sus magnificos objetos de terreno. He incluido los readme de los terrenos de los que he obtenido el material, para la lista completa de creditos.

Espero que lo disfruteis (y disculpad mi pesimo ingles... ).

517 downloads

(2 reviews)

Submitted August 20, 2009

Cirrus clouds for SF/WoV maps (beta) SP4 update

By Lexx_Luthor

Original cirrus clouds, replaced by these newer effects here...

~> combatace.com/files/file/6567-siberian-sky-cirrus-clouds-for-missions-and-terrains/

----
original description...
:
:
*Beta* test, updated for SP3 and SP4 generation of Patches, of very large layers of high altitude cirrus clouds that can move across SF/WoV maps and can be set to any desired altitude (you can fly through these clouds). Cloud effects are created by a type of "ship" object that follows a waypoint across a map. Read the Install file, it describes what's going on here.

The website is a thread on this at the ThirdWire SF/WoV forums.

Thanks to TK/ThirdWire and all the modders who made this Aw-Sim possible. Thanks to Polak for encouraging me in this.

873 downloads

(2 reviews)

0 comments

Updated August 10, 2013

City_tiles_for_EuroWW2_SPRING

Lo primero y como siempre, he de agradecer sus trabajos a TOD@S los que haceis las mod, pues sin vosotros nada de esto seria lo mismo.

Igualmente, recordar que todo lo que he presentado son adaptaciones de trabajos ya existentes, que he confeccionado para disfrute propio, pero que me parece
justo compartir. Por lo tanto corresponde a otros el merito de este trabajo.

Dejo esta 2ª, y en principio, ultima actualizacion del repintado de EuroWW2. En ella no hay mas que 4 nuevos azulejos que corresponden a las zonas que
rodean a las ciudades. Con estos azulejos los edificios y arboles de las afueras de las ciudades se corresponden con lo que hay dibujado en el suelo.

Instalacion: descomprimir en la carpeta "Terrain".

Un detalle que olvide en "Water_for_EuroWW2", tener en cuenta que hay que instalar EN ESTE ORDEN:

1º, "Buildings&trees for euro WW2 SPRING".
2º, "Water For EuroWW2 SPRING".
3º, "City tiles for EuroWW2 SPRING".

Saludos a tod@s.

128 downloads

(0 reviews)

0 comments

Submitted August 2, 2009

Civil Mod "FireFighters"

By Gepard

CIVIL MOD "FIREFIGHTERS"
=======================

I.
The CIVIL Mod "Firefighters" is made for FIRST EAGLES.

==============================================

II.
I made this mod for my son, because i believe that it is not really good if a 7 years old boy is dropping bombs or firing missiles or shooting guns. So i decided to make a civil version of TK's sims. That my son is a fan of the Feuerwehr (fire brigade in english), gave me the idea to make a mod for the flying firefighters who use agricultural planes or old military planes like the Tracker, the B-26 etc to fight against wood fires all around the world.

This mod includes a modified version of my Vogesen terrain, the Z-37 Cmelak agricultural airplane and modified files to make modern planes usable in FIRST EAGLES.

You can fly firefight missions (mostly suppress woodfires), Search missions (SAR) and you can drop parachutists.

++++++++++++++++++++++++++++++++++++++++

III. INSTALLATION

1.) You need a clean installation of First Eagles (FE)
2.) Open folder objects/aircraft and delete all subfolders (planes)
3.) Open folder objects/groundobject and delete all subfolders (Groundobjects)

4.) Unzip the Civil Mod into your civil First Eagles installation

5.) to make the O-1E Cessna and the C-130 usable you must include the files O-1E.lod, C-130A.lod, C-130A_LOD002 - 005 in the relating folders. This files are part of original SFP1,WOE,WOV game. You must extract them from SFP1,WOE or WOV objects.cat by using the SFP1E tool which you can find at CombatAce.com

Thats it

With the Civil Mod comes the file meine.ini which you find in Controls folder. This file allows you to use flaps, breaks etc in game. This are the option settings i use in my game. You can replace this file by your own controls file from an other SFP1,WOE,WOV,WOI game.

++++++++++++++++++++++++++++++++++++++

IV.
I want to say thank you to Darreck for the Coolingtowers, RussoUK2004 for the VW, suicidal for the Lamas, Canadair for the Waterdrop effect and all the othersfor hints, files, ideas etc.

*******************************************

V.
CIVIL MOD "FIREFIGHTERS" IS FREEWARE. COMMERCIAL USE IS NOT ALLOWED.
If you find bugs please post them in StrikeFighters section of Combatace.com forum.
If you want to modify CIVIL MOD "Firefighters" then feel free to make it so.

+++++++++++++++++++++++++++++++++++++

VI.
Hope you enjoy it.

Michael (Gepard)

============================================

VII.
Made in Germany
Mai 2009

============================================

VIII. TO MAKE IT ENGLISH

I wrote this mod in german language. Into english retranslated files you find in subfolder Terrain/Vogesen Zivil/ENGLISH. Please copy the files Vogesen Zivil-targets and Movement into your Vogesen Zivil folder. MISSIONSUMMARY and MISSIONTYPE in your MENU folder.
I hope that my translated files are good enough. Feel free to modify them.

235 downloads

(3 reviews)

Submitted May 28, 2009

CLOUDS PACK

By dalaiLAMA

CLOUDSMODfor SF1/WO*

**********************************

I picked up my mod color for file Environment thatused the Gumpy for its Clouds mod(http://combatace.com/files/file/12364-il2-clouds-for-wov-and-woi-series-1/).My mod can be used with the other Environment system for WO *.

My mod used a total of 5 types of clouds. These cloudsare different in colour, texture and shapes. I have included a cloudguide.jpg with screenshots, labeledto match the folders, so you can get an idea of what each cloud looks like.

.

**********************************************

INSTAL

Just copy a cloud1.tga from any one of the six foldersincluded in the mod and paste it (just the file, not the folder) into your Flight folder. Always back up youroriginals!

That's all. If you want a different kind of cloud,must select a type and a copy to folder of the flight in the game (copy alwaysCloud1 tga file.)

It is good to have backup files!!!

**********************************************

I hopethat my clouds for you will have an interesting atmosphere in your flightWinter landscape requires other clouds than the summer landscape...

708 downloads

(3 reviews)

Submitted December 16, 2011

CloudScape v1

CloudScape Mod for Strike Fighters Gold, Wings over Europe, and Wings over Israel

This mod has been tested in all the above listed sims. I have every reason to believe it will work in Wings over Vietnam and Strike Fighters Project 1 as well.

For me, an essential part of the immersion in a flight sim is just watching the clouds go by. In real life, I watch clouds often and commonly photograph them. I like clouds that form into interesting and complex shapes.

My intent here was to create cloudscapes that are appealing to the eye and thus increase the immersion into the game.

In 2007, I created a cloud mod for First Eagles with the same idea in mind. When I placed the same mod into WoI and SFG, I felt the image didn't fit with the bluer skies of the modern era sims.

Tweaking the colors didn't work well enough. So I kept the same alpha channel (mask), modded it a lot, and created a completely new image with it. I think this one works better. This new image, on first glance, doesn't look nearly as nice as the default. Don't be put off. Most of the cloud's appearance is managed by the alpha channel embedded into the image.

NOTES

Of the over 60 different clouds I tried, I couldn't decide which one I liked best, so I am including just two and letting you decide which you like best.

If you already have an edited environmentsystem.ini file or a cloud1.tga file you can opt to use just the cloud1.tga file. Always be sure to BACK UP YOUR ORIGINALS! I have tested the image alone with the Widesky mod and it works just fine.

--More information available in the README.txt

Happy Flying!

Eric Wicklund
aka ShrikeHawk

566 downloads

(2 reviews)

0 comments

Submitted June 28, 2009

CloudScape v2

CloudScape V2 09/03/2009 by ShrikeHawk

This has been successfully tested in WoV, WoE, WoI and also limited testing in the SFP2 sims (thanks to silverbolt). Framerates were minimally affected by this mod during testing.

Since clouds vary widely in their appearance from day to day, it seems to me that the WoX games should have a greater variety in the appearance of their clouds. I notice the clouds a lot and after a while I begin to see too much repetition in the cloud patterns. So I frequently wish for more variety.

As it turns out, you "can" have greater variation. It is possible to use as many as four different clouds in a single installation - one each for scattered, broken, overcast, and inclement clouds. I have capitalized on this to create a wider array of cloud images. In this mod, I have created two sets of four clouds. Each set of four comprises a single install.

Cheers and Happy Flying!
ShrikeHawk

642 downloads

(2 reviews)

0 comments

Submitted September 6, 2009

CloudSkins

CloudSkins by ShrikeHawk, Jan 10 2010

Here is a set of six different cloud images to use as you see fit.

If you can have a huge variety of skins for your F4 Phantom, why can't you have many choices of "skins" for clouds as well? This is the thrust of this mod. New images to change the look of your clouds and use them any way you want.

Just copy a cloud1.tga from any one of the six folders included in the mod and paste it (just the file, not the folder) into your Flight folder. Always back up your originals! These images will work with SF1, SF2, Widesky, Cloudscape, or any modded environmentsystem.ini you have developed yourself. It will also work if you have no modded skies at all.

I have included a cloudguide.jpg with screenshots, labeled to match the folders, so you can get an idea of what each cloud looks like.

CREDITS

Much thanks to Derk, Stick, Spinners, GrinchWSLG. swanbast. Stary, DWCAce, and Silverbolt for their feedback and encouragement.

Cheers!

488 downloads

(1 review)

0 comments

Submitted January 11, 2010

CloudSkins Too: PaintedClouds

CloudSkins Too:PaintedClouds - Mar 14, 2010 by ShrikeHawk

Here is another set of CloudSkins for your amusement. In this set, I used a different technique to create the clouds. This method gives me far more control over their look, because it allows me to actually "paint" in the details. Thus the "Painted" subtitle for this set. Additionally, I've played with larger images (768x768 instead of the usual 512x512). There is a slight framerate hit (2-8FPS) in using these clouds, but if your system can handle it, they're worth it. I have included three 512x512 images if you prefer the standard size.

BONUS FILE

The idea of CloudSkins has been to only supply the images and let the users supply their own sky settings. In this set you can still do that. But this time I am supplying an environmentsystem.ini file that I use in all my installs.

This was primarily created by ASRAAM. He combined the features of Widesky, CloudScape, and the sky settings of NF4+. So I believe, but have not confirmed, this file will work in SF2 as well as SF1. Most of the work is ASRAAM's and he deserves a lot of credit for it. In turn, I have changed some of the cloud settings to suit my tastes. I have tested this out in WoV,WoE, and WoI. To use it, simply copy the environmentsystem.ini file into your Flight folder.

SPECIAL BONUS FILE

I have added a folder named "CloudBurst." This contains a different environmentsystem.ini file with a trick I learned from Stick. It overloads the cloud counts and produces a striking cloudscape full of many cloud layers. I used this file to create the screenshot for CloudSkins Too. It uses a lot of framerates so it's preferred for more powerful systems. To use it, just copy the environmentsystem.ini file only (NOT the whole CloudBurst folder) and place it into your Flight folder.

CREDITS
Much thanks go out to Stick and ASRAAM for technical support, and Piecemeal, suhsjake, NeverEnough, Haukka81, Dogzero1, Icarus999, and Dude27 for their enthusiasm and encouragement. Greatest thanks to TK for an awesome sim.

1,017 downloads

(5 reviews)

3 comments

Submitted March 15, 2010

DBS Water Fix

By Wrench

DBS Water Upgrade/Update for SF/Wo* (08+) and SF2

This is a little package contains newly rebuilt sea and sea/land transition tiles for Major Lee's "Bering Straits" terrain, and is designed for use on the enhanced targets upgrade I released Nov, 2008. It can be used on either the original OR the upgrade. If you don't have the upgrade, it's available at the following URL:

http://forum.combatace.com/files/file/7684-bering-straits-terrain-targets-upgrade/

What this package is, are all the 'waterish' tiles rebuilt with new alpha channels, thereby allowing for more water action to be visible (even with all that cursed ice!!). A new waternormal bmp is also included, for enhanced wave action.

It has been tested in all 1st Gen Sims (SF/WoV/WoE/ at 10/08 patch levels) and SF2 (merged, 2/10 patch, withOUT SF2:I).. But, as I'm on XP, I can't take advantage of the DX10 shaders....

As always, READ the enclosed readme FIRST for full, detailed instructions for BOTH 1st and NextGen sims game installs. It reccomened you read this document through before installing to either SF/Wo* or SF2 series, to make sure you know what's to be done, and how to do it.

Consider this as my birthday present to all of YOU!!

Good Hunting!
Wrench
Kevin Stein

ps: the screenie above was taken in SF2, with me piloting that CF-104 (easily made flyable), so I know it do work in NextGens!! I'd like feedback from our Vista/Win7 DX10 users, with screenies if possible, so I can see it looks OK there, as well.
TIA!
W

402 downloads

(0 reviews)

0 comments

Submitted April 5, 2010

DESERT / ISRAEL2 ground environment update

By Stary

DESERT / ISRAEL 2 ground environment update ("tree mod")

Should work with any maps using default SFP1/SFG desert tileset in jet titles from the series. In all cases you'll have to use the desert.cat or manually extract and move the tiles from desert.cat to your terrain folder.

Not tested with the "desert replacement tileset"! Should work, but objects placement will be slightly incorrect.

1,104 downloads

(1 review)

4 comments

Submitted November 26, 2008

Enhanced Cloud Top Layer

By Fubar512

The default overcast and inclement cloud top bitmaps in any of the Thirdwire series (SF, WoV,WoE, FE, and now WoI), always seem to lack "depth". So, this is my attempt at rectifying that issue.

Installation is quite easy. Simply extract the four bmp files contained in this zip archieve (CloudLayerTop2-CloudLayerTop5.bmp), into your sim's "Flight" folder. And that's it!

To test, simply fly above the cloud deck under either overcast or inclement weather conditions.
To remove, just delete them and the game will revert to using it's original (and protected) cloudlayertop bitmaps.

Cheers,

Fubar512 and Brain32

935 downloads

(6 reviews)

0 comments

Submitted March 26, 2008

Forests and farms environment mod

By Stary

Forests and farms modification for Wings Over Europe

Version 1.01
-quick fix to repair wrong texture entry no. 102 in germanyce_data.ini
(missing texture bug)

This is a set of new bitmaps and .TOD files for Germany map in Wings over Europe.
It's aim is to create new, realistic looking ground environment, still maintaining acceptable framerate.
Adds lot of trees in woodland areas, some new farm buildings in farmlands, powerlines along the roads, and other little features on the ground.

2,811 downloads

(12 reviews)

0 comments

Updated February 17, 2008

Germany CE Rescaled Trees for Brain32 / Jan Tuma Tree Mod

By Bananimal

This is a set of rescaled trees for Jan Tuma's tree set mod for Brian32 GermanyCE repainted tiles. You must have Brian32's repainted tiles V1.0 for GermanyCE terrain to use this mod.

I have reduced the tree size to a more realistic size to help facilitate sense of speed and scale.

INSTALLATION:

Install Brian32's repainted GermanyCE tiles. Copy all the files in this package to your WOE\TERRAIN\GERMANYCE folder. Over write when asked.

That's it. Go fly.

Legal:

Permission to rerelease Jan's tress was given to me by Jan. I thank him for his allowing me to release this mod to the community. All terms of use from Jan's mod apply to this mod as this was originally his work. I just merely rescaled / added more trees. For freeware use only.

Cheers,

Bananimal

341 downloads

(0 reviews)

0 comments

Submitted December 12, 2008

GermanyCE Buildings

By hi ho silver

GermanyCE Buildings

Thanks to stary for his great work

simply unzip and drop the two jpeg's into
the new GermanyCE folder and go fly......

Hi Ho Silver

707 downloads

(3 reviews)