Strike Fighters by Thirdwire

Mig-17PFU FOR SF2
 
To install just extract with directory structure intact to the Aircraft folder
 
This is just a update model of Wrench Mig-17PFU model with new TK Mig-17PF body
 
thank for all people that have work on this game
 
Credits:
Madcaddie for creating the orginal Fresco D & E mods
Lexx_Luthor for weapons locations tweeks
Wrench for doing the original skins to something better looking,his weapon system for mig-17 pf
TK & the 3rd Wire team for creating the MiG-17, and the original skin.
 
Christian

Mig-17PF (SP16) FOR SF2
 
To install just extract with directory structure intact to the Aircraft folder
 
This is just a update model of Wrench model with new Mig17 PF body
 
thank for all people that have work on this game
 
Credits:
Madcaddie for creating the orginal Fresco D & E mods
Lexx_Luthor for weapons locations tweeks
FastCargo for the 'fake pilot mod'...very cool!!
Wrench for doing the original skins to something better looking.
TK & the 3rd Wire team for creating the MiG-17, and the original skin.
 
Christian

there are two seat modell included one in a brown color and one in a green color
this seat was installed in the Canadair Sabre Mk6/Lihtning/F-8 and in a lot off other aircraft
 
please read the readme for installation
 
 
the position_value of the pilot is also the positon_value for the seat just copy and place it
 
 
<b>version 1.1 28.08.2008</b>
- new 3d model and skins -

snow camo made by ezmenio
enjoy

Okinawa Terrain Upgrade, Version 3.0



For SF/SFG/WoV/WoE WW2 PTO modded installs, 06 Patch Levels


 
This mod is a extensive rebuild to Edward's WW2 Okinawa terrain, and is designed to COMPLETELY replace any and all eariler versions. This is the COMPLETE terrain, with all tiles, TODs, inis and terrain objects necessary to (almost) just unzip and fly over. YOU, the End User ™ are still responsible to locate the various and sundry Ground Objects and Aircraft needed for you PTO flying pleasure. I've supplied MANY, but more are not included. This map has been re-designed with Operation Olympic in mind, hence the island of Okinawa itself should be consided "nearly" secured; ie American and Allied forces have pretty much taken the island, and are building up for the Invasion of Japan. The time frame I have in mind in Mid-1945 to approx late 1947, or even into 1948 if needed. To that end, expect a Runway 4 (large airfield, albeit -NOT- historically correct) at Kadena for Bomber Operations, and several smaller auxillary fields to 'activate' themselves based on the year flown (ie: 1946).
 
Many completely NEW target areas have been added, and the map has been extensively retiled to create a more Japanese looking environment. This retiling 'resets' several cities, adds some rivers, creates clear zones around the various airfields, and corrects some other issues. The targets ini itself has been almost complety rebuilt, adding LOTS of interesting things to look at and blow up. TODs and tgas from "Green Hell" and another terrain project have been used to create forests and such, and several brand new custom TODs and and several new tiles have been created. These are based off the stock VietnamSEA tiling, so these new TODs are usable in ANY map that uses the WoV VietnamSEA tiles, or can easily be imported for any other terrain type.
 
This is a very 'target rich' environment -- there are plenty of items for strike and anti-shipping missions. It is also HEAVILY defended - so watch out for the flak. As expected, I added the 'Rising Sun' Japanese flag, and the Stars and Stripes. Several 'new' parked aircraft have been added; you'll see them if you look for them. There are also other bits of 'eye candy' floating around... :) I've included several updated data inis for some ships, as they now have semi-proper effects (IJN DDs now have smoke coming out the stacks)
 
You MUST have ALL the Pacific Objects (ground units, ships, AAA, infantry, etc) already installed in you PTO version of the game; otherwise things won't be appearing. This is especially important for the ships. See below in the "To Install" for more information. Don't forget to check Geo's page for more WW2 goodies ... there's a lot of stuff that's usable (and used!) here as well.
 

= MAKE SURE YOU HAVE THE LATEST, WW2 NATIONS INI IN YOUR FLIGHT FOLDER =
= MAKE SURE YOU HAVE THE LATEST WW2 FORMATIONS INI IN YOUR FLIGHT FOLDER =
== MAKE SURE YOU HAVE THE LATEST WEAPONS PAK FOR THE WW2 WEAPONS!! ==


 
It has been tested in SF, WoV and WoE, using their cats pointed to in the main ini. As most of the new objects will be residing directly in the terrain folder, you should have no problems. (see the CombatAce Knowledge Base for the tutorial on using the cat pointer line). It has NOT, however, been tested in post 08 patch WoI or post 08 patch SF/SFG/WoV/WoE; nor has it been tested in the SF2 Series - it is NOT designed for useage in those type of game installs. If you choose to do so, expect NO support from me -- you're on your own. However, it IS usable ... it's just 98.6% ™ of the aircraft are NOT!
 
As always, it's reccomended that you unzip this package to a temp folder or your desktop to gain access to the rest of this readme.
Follow these instructions herein =EXACTLY= and you should have no problems. It's =HIGHLY= reccomended you read this document completly through before installing this mod. In other words -- read this damn thing, or you'll get yourself in a jam!!!!
 
 
Good Hunting!
Wrench
Kevin Stein
 
ps: like the recent Solomons V3 pak, there are still a few new parked aircraft that are NOT finished yet, and therefore not included (doh!). When and as they are done, expect a VERY small update.

F-4Cs – 8thTFW Ubon Operation Bolo - By Crab_02 and Mike Druzolowski
 
53 F-4C serial numbers which actually operated with the three squadrons of the 8th TFW at Ubon as of 01 January 1967. From these were drawn the aircraft to fly Col. Robin Olds' famous Operation Bolo mig killing mission the next day on 02 January.
 
Description: This package is two parts – a texture add-on for the 1966 F-4C pack available at CombatAce for the 433rd/497th/555th TFS which is the bulk of the serial numbers assigned in Jan 67, and a separate aircraft representing the "slicknose" variant of the F-4C seen at this time. Enclosed are two QRC-160 ECM pods attached to the left outboard pylon (the pylon does not appear when the ECM pod is assigned in a mission as it does when A/G ordnance is selected, so the pylon is attached) – one is camouflaged and the other white. Wing tanks are available in the 1966 F-4C pack. Also enclosed is an update to the 1966 base .LOD and wing tank texture updates. (Hey…I said that this was an ongoing project didn’t I….?) The new loadout.ini files have a [AirToAirLongRangeBolo] entry that can be used for a Bolo mission. Oh, and I made the ECM pod/pylon match the same weight/drag as the opposite wing tank so the bird flies straight – although when the tank is jettisoned you’ll be loaded asymmetrically again…..
 
Historical bit: FY1964 USAF F-4Cs coming off the production line for USAFE had the F-4J-style nose radome installed, and these started to become available to PACAF units late in 1966. This radome gave a small performance enhancement due to a bit less drag, but was removed early in 1967 as the AN/APR-25 radar homing and warning system was installed into the old IR-sensor housing. It is estimated that perhaps a quarter of the F-4Cs at Ubon at the time of Operation Bolo were configured this way, so the airplanes are not broken down by squadron. The airplanes flown for Bolo from the Wolfpack still retained the 1966-style Navy LAU-17 inner pylons (although one source that I found said that only F-4Cs with the new MAU-12 pylons were flown for Bolo, but photographic evidence tends to disprove this). All of these planes were modified to carry a single QRC-160 ECM pod on the right outer pylon (seen on the USAF A/G weps pylon as well as the early Navy pylon with the adapter (the latter is not presented here), and a single 370 gal drop tank on the left outboard station for the mission, and this became standard in Southeast Asia during much of 1967, until the inboard pylons were modified to accept the pods later in 1967.
 
As before, I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are again 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.
 
My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots, and to X Ray who did the superb pilot repaints (and whose name keep forgetting in the readmes).. Also my thanks to Mike France and Alan Howarth who know more about F-4s than I ever will!
 
Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.

JH-7A Flounder For SF2
 
*******************************************************************************************************************
 
These from Wiki:
 
The Xian JH-7 (Jian Hong-7; NATO reporting name Flounder[1]), also known as the FBC-1 (Fighter/Bomber China-1) Flying Leopard, is a two-seater (tandem), twin-engine fighter-bomber in service with the People's Liberation Army Naval Air Force (PLANAF), and the People's Liberation Army Air Force (PLAAF). The main contractors are Xian Aircraft Industry Corporation (XAC) and the 603nd Aircraft Design Institute,now named First Aircraft Institute of AVIC-1. The first batch of JH-7 aircraft were delivered to the PLANAF in the mid-1990s for evaluation, and the improved JH-7A variant entered service in 2004.
 
*************************************************************************************************************************
 
JH-7
 
Skins by YEYEYE
 
3D Model by YEYEYE
 
Flight Model by Erwin_hans
 
INI work by YEYEYE and Erwin_hans
 
Effects by YEYEYE and Erwin_hans
 
PLAAFpilot by YEYEYE
 
Zvezda K-36D Ejection Seat by AleDucat
 
SF2 updates by NeverEnough
***********************************************************************************************************************
 
1.Unzip the JH-7A.rar
 
2.Simply extract the contents of the JH-7A folder into your Mods\StrikeFighters2 folder.
 
3.Then............enjoy it
 
This is a very nice model of a modern Chinese attack aircraft. The original BETA release has been tuned to fix a few small issues. The Weapon Station attachment positions have been adjusted, the landing gear rolling radius has been tweaked, the engine fans rotate correctly, and the drag parachute works. This bird is nice to look at and brutally efficient at attack and shipping strikes. For any air-to-air work, the PL-8 heaters get the job done!
 
Shift 0 will open and close the canopy, and the drag parachute will deploy when the airbrakes are activated on the runway.
 
******** EVERYONE CAN USE THESE MODELS for all Third Wire projects, as you want.************************
 
 
Erwin_Hans,YEYEYE
 
 
 
----------------Inksy Group 2008

This is my first work .this is a remodeling of mig-21MF . I made some changes, easy flight model, new hangar and loading screen ,can fire ASM, Semi active radar homing AA missiles .
 
 
Some information about MIG-21M/MF Indian Air force-----MiG-21M/MF [Fishbed J] - Type 96
 
The MiG-21M/MF (Type 96) is a Multi-role version with one R-11-300 turbojet with 13,688 lbs. of thrust. The aircraft has 4 pylons which can carry external fuel tanks, air-to-air missiles or twin barrel guns. Has a zero speed, zero altitude ejection seat. The MF variant has a R-11F2S-300 turbojet, otherwise similar to the 'M' variant.
 
Number Procured: 93+
........................ 65 MF (Type 96) procured directly from the USSR
........................158 M variants manufactured by HAL
 
 
Installation: unpack or unzip in aircraft folder …
 
 
 
Thanks to COMBATE ACE & those who uploaded new aircraft, sound , weapon packs that help me verymuch.

Boot screens for aircraft:
 
- MiG-21UM, -23UB, -23UM, -23B, -23BN, -23MLD, -31
- Su-27SK, -27SKM, -39, -47
- A-50
- IL-76
- Tu-22
- An-12, -26, -30
- 3M
 
Total 41 screen.
Some pre-existing screens have been fixed.
 
Designed for all versions of TW.
 
Installation:
--------------
 
Choose one of the screens and put it in the appropriate directory, after deleting the names of superfluous characters (+ =)

>------Sa-2 tomahawk-------<
 
Lee el ReadMe, toda la informacion está ahí.
 
Read the ReadMe, all information is there
 
 
Enjoy it