Looking for a Sea Harrier

[+allenjb42 4,232]

I might be losing it but I was sure there was a RN Sea Harrier available as a stand alone aircraft to add to my NA install without having to extract it from The Falklands mod. Any idea where it might be or is it a WIP?

[+ghostrider883 526]

Allen,

Was it this one? :

http://combatace.com/files/file/10155-operation-corporate-sea-harrier-frs1-pack/

[+RAVEN 414]

This is another one (1st Gen)

http://combatace.com/files/file/468-av-8c-sea-harrier-addon/

[Wrench 9,801]

i'm pretty sure I sent the most current stuff to IanH and dtmdragon when we were working on the FRS.2...

 

guess it didn't get finsished/released!

[+allenjb42 4,232]

That's the one Sandesh! Thanks mate. Edit - just downloaded and noticed it's actually a first gen mod and not SF2! Never mind, a bit of converting's good for the soul!

Kevin,IanH and dtmdragon looking forward to the updated mod.

Raven - thanks for the assist.

Edited August 16, 2012 by allenjb42

[+russouk2004 6,958]

I still have the Frs1 2 and the av8 and matador max files kev

[+ianh755 196]

Allenjb42 - I ended up being "Volunteered" for security during the Olympics & Paralympics thanks to G4S being crap so I'm away from my PC till late Sept-early Oct when I'll be able to finish off the Sea Harrier FRS.1 conversion mate. From what I remember it was using the model/skins straight from ChrisBV's Op Corporate pack and just SF2'ing the ini files and adding Decals (here's a few screenshots of the FRS.1 and FA2 together) -

 

 

 

 

***************EDIT******************

 

Found the beta FRS.51 skin I tried based on ChrisBV's FRS.1 skin with EricJ's decals in a random SF2 folder on my Laptop!

 

Edited August 22, 2012 by ianh755

[+russouk2004 6,958]

I just checked and the models above I have,there are quite a few things wrong,flashing polys,wheels are too low poly,and some mapping errors,also missing refuel probes etc etc,im off this week,and will try to fix what I can.

PS. will fix them so it wont affect existing skins,I ll do the probe as selectable.

Edited August 27, 2012 by russouk2004

[+russouk2004 6,958]

ok remade wheels,added pitots,etc,tidied up some mapping,cockpit,are,panel etc.

Redone nose as it was too pointed.

working on the canopy glass,refuel probe,nose mapping is wrong\stretched,will fix that.cant promise to fix everything,but will do what I can.

heres some progress shots

Edited August 28, 2012 by russouk2004

[Wrench 9,801]

out-frakking-standing!!!!

[fallenphoenix1986 603]

Might just be enough to get me back into TW for a bit, been thoroughly entrenched in FSX for a few months now... wanna make something go boom :P

 

Craig

[Spinners 15,985]

Tidy ; )

[Svetlin 540]

Great job, Russo, hope I may point out a few issues with the landing gear.

Hopefully, since you are at it, you might be able to fix these as well. I am referring to the Harrier FA2 model.

- front and main gear animation - wheels stand right on the ground and then all of a sudden the shocks extend and wheels get submerged; a few moments later shocks retract and wheels get back to normal

- wing-support gear - appear a bit too short; when the aircraft is on the ground, the wing support gear does not extend enough to touch the ground, so the aircraft does not sit steady on ground

[+ghostrider883 526]

Russo,

ANy chance of fixing the the FRS.1( and hence FRS.51). An IFR probe would be nice as well.

 

 

Edited August 29, 2012 by ghostrider883

[+russouk2004 6,958]

Im on it Ghost :)

[+whiteknight06604 934]

that is great news! thanks

[Wrench 9,801]

[+76.IAP-Blackbird 3,557]

great the canopy shape is reworked!! thanks ;)

[+russouk2004 6,958]

ok heres list of stuff done,and under way

Remade canopy glass and screenglass,

Outriggers now corrected. DONE

Added antennaes etc DONE

Remade wheel. DONE

new canopy frame interiors as old were flattened and caused poly flashing.(polys too close together) DONE

remapping nose,and Radome...under way

redoing pylons so they are better selectable....Underway

may redo the landing gears(if got time)

new cockpit,dash...DONE

Edited August 29, 2012 by russouk2004

[Svetlin 540]

 

redoing pylons so they are better selectable....Underway

 

 

Here is a thought - if you have the time and wish to handle it while working on pylons, the FA2 model could benefit from AMRAAM pylons under the fuselage, in place of the gun pods. Just a thought...

[+76.IAP-Blackbird 3,557]

Hi, Russo, may I show an idea i used on my Noseintake planes like the Ye-152 and La-200, the whole body shape of those birds are way less complex than the one of a Harrier, so I tried this out to have a more smoothed front and rear of the fuselage, so the rest is nearly low poly, but the result looks good.

 

Here is and example of your nose section, the yellow lines are the polys you used, the reds are the one I would put in. Its not a huge poly increasy but smooth the nose a bit up with uot redoing the mapping ;)

 

what do you think?

 

here is the way I modeled it, I try to have areas like intakes, nose and cockpit as detailed as possible cause they are the areas you are looking most of the time at them.

 

Its just a sugestion, hope its ok for you I post it here ;)

[+russouk2004 6,958]

I use the meshsmooth or such on my stuff now,so areas like you say look bettermespecially around areas like gear doors etc.

Edited August 30, 2012 by russouk2004

[+76.IAP-Blackbird 3,557]

meshsmooth doenst work on my stuff as I want it, do i need to deselect some specs? Looks good! I had to do it manualy cause of the result. ;)

[+russouk2004 6,958]

Yeah I had to do some by hand too.

ok Radome is now a mesh(remapped it)

I added some polys to nose so I can now remap that bit too.

Fixed pylons now so only what you want is selectable,moved them down in pic for ease of viewing.

adding new belly pylons too.btw :)

Edited August 30, 2012 by russouk2004

[Svetlin 540]

adding new belly pylons too.btw :)

 

Great, thanks!!!

Aren't those wing pylons a bit too many for that Harrier version?

I thought Sea Harriers FRS1 and FA2 had the smaller wimg with just 2 pylons under...

Should be off to read some more, I guess...