Stephen1918

Yes, I uploaded a new version of the Early W.4 yesterday when I uploaded the Late W.4. If you only have blue hex skins for the early version, then you probably have the original upload. Ojcar made a new FM and I uploaded that as version 2 back in June. Yesterday I uploaded version 2.1 which adds the Austrian wood and linen skin.

There is one Austrian skin with each plane. In the late version, it's the blue hex. In the early version, it's a wood and linen. All the skins are interchangeable so you can make a blue hex Austrian skin for the early if you want. I am planning on doing some flying boats, definitely a Macchi and a Lohner. BUT I need to finish the RAF BE2 first.

Today I uploaded a late version of the Albatros W.4 float plane. This one has the radiator on the upper wing. It includes an Austrian skin with the Austrian Naval tail markings. While I was at it, I uploaded a new version of the early W.4 which also includes an Austrian skin. The skins for both planes are interchangeable. Thanks again to ojcar for making yet another FM for my planes.

View File Albatros W.4 (Late) The Albatros W.4 was a float plane version of the D.II. It used the same fuselage, engine, and armament as the D.II, but had a wider wingspan and tail. The W.4 was used for recon and spotting missions in the North Sea, the Baltic, and by Austria-Hungary in the Adriatic Sea. This is a late version of the W.4 with the radiator mounted on the upper wing. I have included a complete set of number decals, and two skins - a blue hex camo skin for Germany and one for Austria-Hungary. I have also included my skinning templates. The skins for the late Albatros W.4 are interchangeable with the early version skins. My version includes a loadout for a light bomb load, even though the W.4 was not used for bombing. You can delete the loadout file if you want more historical accuracy. Since it's a float plane, the W.4 works best in the Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground. It would be best to start the missions in the air. The plane will show up occassionally parked on an airfield, but its availability is listed as "Rare" so it shouldn't happen too often. Credits Thanks to Ojcar for making the data file for the Albatros W.4. Thanks to Nix for providing the sound for the Mercedes engine. And thanks to Quack74 for giving me the idea for a float plane. Installation Instructions For FE1 - Unzip the file and move the folder named "AlbatrosW4Late" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder. For FE2 - Unzip the file and move the folder named "AlbatrosW4Late" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "AlbatrosW4Late". Move the folder named "D" from the Aircraft/AlbatrosW4Late folder into the Decals/AlbatrosW4Late folder you just made. You also need to move the sound file "mercedes160m2.wav" into the FirstEagles/Sounds folder. Submitter Stephen1918 Submitted 11/08/2013 Category Albatros

Today I uploaded a late version of the Sopwith Tabloid, the land based variant of the Schneider float plane. This one has ailerons, v-strut landing gear, a wing mounted Lewis gun, and carries a small bomb load. I also uploaded a revised early version (with minor changes to the data file) and a revised version of the Schneider, with a smaller bomb load to improve the flight characteristics. Thanks to ojcar for making the FM, and for his suggestions to improve all three planes.

View File Sopwith Tabloid (Late) The Tabloid was the land based variant of the Schneider developed in 1913. It was quickly adopted by the British military and was used both by the Royal Navy and the Royal Flying Corps. Later versions had ailerons on both wings and a larger vertical stabilizer on the tail. Most were armed with Lewis guns on the upper wing and could carry small bomb loads. The Tabloid was used mostly for recon and light bombing missions. I have included my skinning templates and a full set of number decals. Credits Thanks to Ojcar for making the data file for the Sopwith Tabloid and for providing input on the model details. Thanks also to Nix for creating the sound file for the Gnome 100hp engine. Installation Instructions For FE1 - Unzip the file and move the folder named "SopwithTabloidLate" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. For FE2 - Unzip the file and move the folder named "SopwithTabloidLate" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "SopwithTabloidLate". Move the folder named "D" from the Aircraft/SopwithTabloidLate folder into the Decals/SopwithTabloidLate folder you just made. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. Submitter Stephen1918 Submitted 11/05/2013 Category Sopwith

I've uploaded an early version of the Sopwith Tabloid. It's a land based version of the Schneider. It uses wing warping instead of ailerons, has skids on the landing gear, and has no machine gun, but it can carry a small bomb load. I've included two skins, a British skin, and a Russian skin so this can be used as a Lebed VII. Each has a full set of numbers. My thanks to ojcar for making another excellent FM, and for giving me some pointers on details of the plane. I've included Nix's sound file for the 100 hp Gnome engine.

View File Sopwith Tabloid (Early) The Tabloid was the land based variant of the Schneider developed in 1913. It was quickly adopted by the British military and was used both by the Royal Navy and the Royal Flying Corps. Early versions used wing warping instead of ailerons. My version has no gun, but some were armed with Lewis guns on the upper wing and could carry small bomb loads. The Tabloid was used mostly for recon and light bombing. In September 1914, Tabloids of the RNAS bombed the Zeppelin sheds at Düsseldorf. An unlicensed copy known as the Lebed VII was built by the Russians and used for recon and later for training. I have created two skins, a British version and a Russian. I have included a full set of number decals for each. My skinning templates are included with the download. Credits Thanks to Ojcar for making the data file for the Sopwith Tabloid and for providing input on the model details. Thanks also to Nix for creating the sound file for the Gnome 100hp engine. Installation Instructions For FE1 - Unzip the file and move the folder named "SopwithTabloidEarly" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. For FE2 - Unzip the file and move the folder named "SopwithTabloidEarly" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create a new folder named "SopwithTabloidEarly". Move the folder named "D" from the Aircraft/SopwithTabloidEarly folder into the Decals/SopwithTabloidEarly folder you just made. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. Submitter Stephen1918 Submitted 11/01/2013 Category Sopwith

Today I unloaded the Sopwith Schneider, a 1914 floatplane. There are two skins, one with British flags on the wings, and a later version with roundels. It's armed with a Lewis gun and can carry a small bomb load. Thanks to ojcar for test flying the model and writing the FM. Since First Eagles isn't really made for water based aircraft, ojcar has included instructions for taking off. I have a land based version, the Tabloid, in progress.

View File Sopwith Schneider The Sopwith Schneider was the floatplane variant of the Tabloid, and won the Schneider racing trophy in 1914. It was quickly adopted by the British military and was used by the Royal Navy throughout the war. Early versions used wing warping instead of ailerons. Some were armed with Lewis guns on the upper wing and could carry small bomb loads. The Schneider was used mostly for recon, some were used to intercept Zeppelins over the North Sea and some were used to attack land based targets. Since it's a float plane, the Sopwith Schneider works best in the North Sea terrain, or in Flanders, Gibraltar or other terrain that has a lot of water. The plane will actually take off and land from a conventional airfield, but it looks strange to see the floats going under the ground. Ojcar has included take off instructions in a separate text file. I have created two skins, an early version with the British flag on the wings, and a later version with roundel markings. I have included a set of number decals. My skinning templates are included with the download. Credits Thanks to Ojcar for making the data file for the Sopwith Schneider and for providing instructions for taking off. Thanks also to Nix for creating the sound file for the Gnome 100hp engine. Installation Instructions For FE1 - Unzip the file and move the folder named "SopwithSchneider" into the FirstEagles/Objects/Aircraft folder. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. For FE2 - Unzip the file and move the folder named "SopwithSchneider" into the FirstEagles/Objects/Aircraft folder. Then in the FirstEagles/Objects/Decals folder, create new folder named "SopwithSchneider". Move the folder named "D" from the Aircraft/SopwithSchneider folder into the Decals/SopwithSchneider folder you just made. You also need to move the sound file "gnome100m2.wav" into the FirstEagles/Sounds folder. Submitter Stephen1918 Submitted 10/29/2013 Category Sopwith

Gterl, I am truly impressed with the amount of work you're doing. I spent more than a year on the Galicia terrain, and that was just converting an existing terrain. You started from scratch and the results are amazing. I'm looking forward to the final version.

It looks like you've done a lot of work. I especially like the way the cities look. I'm looking forward to these.

I took a look, rigging the model for the game engine looks much more complicated than for FE. I won't do anything for IL2 in the near future, but it might be something I'll want to take on when I have more time. Thanks for the info, it does look like a good game.

Nice looking pups!

Gambit168, I've never tried IL2. Who makes it, and where can I get the modding tools? I don't know if I want to add any more projects at the moment, but if the conversion is easy to do, I may try. Thanks for the info!

Thanks for your kind words, gentlemen. The revised British Destroyer is being tested now. I'll upload it as soon as any necessary corrections are completed.

I think I can do that. I had a rough summer - things were happening with my family that needed my attention. Since then it's been hard getting back into the swing with First Eagles. I have several projects that I haven't really worked on since June. I think maybe some smaller projects will help me get back into the routine. I'll see what I can do with the Destroyer.

Lots of nice detail photos here. Thanks for posting.

Beautiful terrain, Gterl. It will be nice to just fly over it and enjoy the view.

Thanks Eric and Dave and everyone else involved for all the work you've done keeping Combat Ace alive and functional. I've noticed that some of my files are broken, would it help if I uploaded the original files myself?