Jump to content

Recommended Posts

I decided to make a post so I can put all my work in one place I hope you okay with that.

Okay here is the update of the M978/M977 HEMTT more detail will be added but this is how it looks so far.

 

 

Screenshot 2020-11-23 181104.jpg

Screenshot 2020-11-23 181129.jpg

Screenshot 2020-11-23 181151.jpg

Screenshot 2020-11-23 181208.jpg

Screenshot 2020-11-23 181240.jpg

Screenshot 2020-11-23 181300.jpg

Screenshot 2020-11-23 181318.jpg

Screenshot 2020-11-23 181337.jpg

  • Like 11
  • Thanks 1

Share this post


Link to post
Share on other sites

I don't think anybody will mind you consolidating your work into one topic, makes it so much easier to maintain one topic than so many others.

Nice work on the HEMTTs but was wondering which version is the cargo version, never seen one of those in that configuration before.

  • Like 1

Share this post


Link to post
Share on other sites
8 hours ago, EricJ said:

which version is the cargo version, never seen one of those in that configuration before.

This is the 1988 Oshkosh M977 HEMTT 8x8 Truck W/Rear Mounted Crane.

 

461332_6002_161_0001.jpg

461332_6002_160_0001.jpg

461332_6002_159_0001.jpg

461275_6002_162_0001.jpg

461275_6002_161_0001.jpg

461275_6002_160_0001.jpg

461275_6002_159_0001.jpg

  • Like 1

Share this post


Link to post
Share on other sites

Finally, UAZ-469, It not a high poly but It will do, big thanks to compufat for making the textures for the UAZ and the driver. I need to add a gunner for the 106mm gun

The driver model is free to use from the net

Screenshot 2020-11-24 140606.jpg

Screenshot 2020-11-24 140618.jpg

Screenshot 2020-11-24 140630.jpg

Screenshot 2020-11-24 140645.jpg

Edited by GKABS
  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites
2 hours ago, GKABS said:

Finally, UAZ-469, It not a high poly but It will do, big thanks to compufat for making the textures for the UAZ and the driver. I need to add a gunner for the 106mm gun

The driver model is free to use from the net

Excellent! But I think the windshield would need to be down for a more realistic look with the recoiless rifle.

  • Like 1

Share this post


Link to post
Share on other sites
7 minutes ago, Piecemeal said:

Excellent! But I think the windshield would need to be down for a more realistic look with the recoiless rifle.

You are apparently correct I will but it down:drinks:

Share this post


Link to post
Share on other sites
10 hours ago, GKABS said:

This is the 1988 Oshkosh M977 HEMTT 8x8 Truck W/Rear Mounted Crane.

 

 

 

 

 

 

Ahh I see, the cargo in the bed messed me up, thanks

Share this post


Link to post
Share on other sites

Thanks to Coupi  (data files and testing) and  compufat (making the texture for the UAZ and the driver/Gunner) for helping to complete this UAZ-469:

Videos by Coupi  

 

  • Like 1

Share this post


Link to post
Share on other sites

That's pretty cool, glad to see you feel better

Duel of Titans one day!

Your UAZ-469 vs the Land Cruiser...

4pbZErj.jpg

Share this post


Link to post
Share on other sites
On 12/6/2020 at 11:47 PM, Stratos said:

That's pretty cool, glad to see you feel better

Duel of Titans one day!

Your UAZ-469 vs the Land Cruiser...

4pbZErj.jpg

I never forgat your request, my friend,  and I will deliver.  it's in the pipeline. :wink:

5fcfd776f1ad8_Screenshot2020-12-08224332.thumb.jpg.bd1d51800c4a0aeeb44bd7e95b87423f.jpg

 

 

  • Like 6

Share this post


Link to post
Share on other sites

Okay started working on the Bayraktar TB2 it will be a while but this is the start.

5fd232c0b162d_Screenshot2020-12-10173522.thumb.jpg.e70cef8905efd838779b8bd8ad2b1202.jpg

This model is addiction lol can't stop.  

 

5fd232c962076_Screenshot2020-12-10173624.thumb.jpg.231bd51c56760a3b3a5a666b6a30d152.jpg5fd23a69c1b43_Screenshot2020-12-10180739.thumb.jpg.47878186584493366f53185d958bb80d.jpg5fd23a6bc804b_Screenshot2020-12-10180756.thumb.jpg.d8abc7ff8612a2d2c3e74e35c518feb5.jpg

Decided to make it in more than one piece.

5fd2559905adb_Screenshot2020-12-10200556.thumb.jpg.d548ce9f8272a18bf2deaec2b11bb852.jpg5fd2559b05b94_Screenshot2020-12-10200617.thumb.jpg.133bb393735925bc438c76550936421d.jpg

 

Edited by GKABS
  • Like 7

Share this post


Link to post
Share on other sites

I think I am getting closer to the correct shape. but there is a lot of work needed.  I will take a break and do another project and I will get back to it later.

5fd3aa943c029_Screenshot2020-12-11200739.thumb.jpg.53dbb92e031a8e551e2bc7322bebb48f.jpg

 

Edited by GKABS
  • Like 5

Share this post


Link to post
Share on other sites

The Bayraktar TB2 about 90 % completed,  not having a good blueprint is really making it hard to get it correct I have used more than 100 photos to work with but I think it will do. next UVW work, then animating the landing gear as well as  other things. 

5fda0af70c3ca_Screenshot2020-12-16161635.thumb.jpg.d50f8f30cd1908c5ddd984947fe91adc.jpg5fda0af9e27d6_Screenshot2020-12-16161704.thumb.jpg.d13d04814139c5ed10b4e42601a95525.jpg

Screenshot 2020-12-16 161915.jpg

Screenshot 2020-12-16 161938.jpg

Screenshot 2020-12-16 161957.jpg

Screenshot 2020-12-16 162017.jpg

Screenshot 2020-12-16 162034.jpg

Screenshot 2020-12-16 162141.jpg

Screenshot 2020-12-16 162225.jpg

Edited by GKABS
  • Like 8

Share this post


Link to post
Share on other sites

Thanks, looking forward to a nice fully armed OPFOR drone fleet to worry about :-).

  • Like 1

Share this post


Link to post
Share on other sites

The last update for today I completed the UVW and started making some work on the painting. 

5fda6551ddbf0_Screenshot2020-12-16225020.thumb.jpg.ebc2938f5f5b6ea49774f7e9cabfe092.jpg

 

Screenshot 2020-12-16 202609.jpg

Screenshot 2020-12-16 224515.jpg

Screenshot 2020-12-16 224642.jpg

Screenshot 2020-12-16 224714.jpg

Screenshot 2020-12-16 224757.jpg

Screenshot 2020-12-16 224853.jpg

Screenshot 2020-12-16 224914.jpg

  • Like 5
  • Thanks 2

Share this post


Link to post
Share on other sites

another update.  If someone can tell me how to make rivets that will be great. 

PS. The correct name for the drone is TB2 not BT2 I have made a mistake typing it. :lol:

5fdb410069457_Screenshot2020-12-17142520.thumb.jpg.acd42a5455b2ece7d231cc03a246e132.jpg

 

Screenshot 2020-12-17 142343.jpg

Screenshot 2020-12-17 142403.jpg

Screenshot 2020-12-17 142418.jpg

Screenshot 2020-12-17 142439.jpg

Screenshot 2020-12-17 142500.jpg

Screenshot 2020-12-17 142556.jpg

Screenshot 2020-12-17 142647.jpg

Screenshot 2020-12-17 142716.jpg

Screenshot 2020-12-17 142736.jpg

Edited by GKABS
  • Like 4

Share this post


Link to post
Share on other sites
13 minutes ago, JosefK said:

@GKABS, looks ready for precision weapons to me.  We're going to be flying too fast to count rivets on a squadron of cute attack drones making a swarm attack.

 

 

I am making the missiles my friend I have all the information ready :wink:

Screenshot_20201210-003756_Chrome.thumb.jpg.5bdc31dc0bd978802c6631b132510da5.jpgScreenshot_20201210-003812_Chrome.thumb.jpg.304d6500c271c69712c1dc07f18b6561.jpg

I think I worked out the rivets problem.

5fdb6868daa4e_Screenshot2020-12-17171334.thumb.jpg.9e3762274636310a5f4cb0e9ecc9dfc1.jpg

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

Rivets I use 1 pixel black and for highlight overlap a white pixel.....or 4 etc  and overlap white with the black rivet layer...like on the wing pic...and alter transparency to suit..

photoshop you can get lines of dots for rivets and theres brushes out there peopl e have made of panel lines...you click start then finish line and up they pop..

or like fuselage if high res you can do better rivets..(round raised or sunken etc)

Image2.jpg

Image4.jpg

  • Like 2

Share this post


Link to post
Share on other sites

OT:
Russ , how did you get the round hollow rivets???

Share this post


Link to post
Share on other sites

I have been having this problem animation the landing gear and the great door in 3d max it's okay but then in the game and in the tools, t is not correct. and some time in 3d max after I complete the animation and I go back to 0 it starts from 1.  I really don't know what is the problem I did everything xform and export and import and restarting max.

Edited by GKABS

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By GKABS


      View File UAZ-469
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      UAZ-469 model
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat big thank you for making all 4 textures for the model and the Driver/Gunner.
      Coupi for his outstanding work with the data file without him this is nothing big thank you, my friend.
      Google for some photos and information.
      Driver and gunner are free low poly from the net without skin.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      videos by Coupi
       
      Submitter GKABS Submitted 12/06/2020 Category Ground Object Mods  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      UAZ-469 model
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required. (tested and work only for SF2)
      Installation:
      Copy the folder to Objects/GroundObject and the following to _TYPES.ini file in the terrain folder.
      [TargetTypeXXX] <-------- Change to the next number at the bottom of you types list

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      1.0.0
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Credit goes to the following:
      Third Wire for making this outstanding game.
      compufat big thank you for making all 4 textures for the model and the Driver/Gunner.
      Coupi for his outstanding work with the data file without him this is nothing big thank you, my friend.
      Google for some photos and information.
      Driver and gunner are free low poly from the net without skin.
      And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game.
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop

      If you need any assistance please contact me at 
      gkabs@gkabs.net
      videos by Coupi
       
    • By GKABS


      View File Jet pilot
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required.
      This is for Strike Fighters 2 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
      Submitter GKABS Submitted 01/10/2020 Category Pilot Mods  
    • By GKABS
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      New Pilot model
      All my files should include the Strike Fighters 2 Series game file (.old) and the texture required.
      This is for Strike Fighters 2 Series ONLY.
      Installation:
      Copy the files to Objects\pilot folder
      Add these lines to the _DATA.INI file to any jet you would like to add the new pilot to.
      [Pilot]
      PilotModelName=GK-Pilot     <----
      PilotHeadNodeName=GK-Head    <----
      if you have a two-seater add the Copilot as well.
      [CoPilot]
      PilotModelName=GK-Pilot1    <----
      PilotHeadNodeName=GK-Head    <----

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/

      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net
    • By GKABS


      View File SAM-3 complete system
      Hello and thank you for downloading my work.
      https://gkabs.net
      What's included:
      complete SA-3 models tested and working for only SF2 series.
      Installation:
      Copy the files to Objects folder and the following to _TYPES.ini file
      [TargetTypeXXX]  <-------- Change to the next number at the bottom of you types listing
      Name=SA-3DL
      FullName=SA-3 Goa Dual SAM 
      TargetType=SAM_LAUNCHER
      ActiveYear=1962
      TargetValue=100
      UseGroundObject=TRUE
      GroundObjectType=SA-3DL
      RepairRate=0.555
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=LargeRocketGroundExplosion
      DestroyedModel=sa-2_launcher_destroyed.LOD
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100
      [TargetTypeXXX]  <-------- Change to the next number at the bottom of you types listing
      Name=SA-3QL
      FullName=SA-3 Goa Quad SAM 
      TargetType=SAM_LAUNCHER
      ActiveYear=1962
      TargetValue=100
      UseGroundObject=TRUE
      GroundObjectType=SA-3QL
      RepairRate=0.555
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=LargeRocketGroundExplosion
      DestroyedModel=sa-2_launcher_destroyed.LOD
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100
      [TargetTypeXXX]  <-------- Change to the next number at the bottom of you types listing
      Name=Pechora-2ML
      FullName=Pechora-2ML Goa Quad SAM 
      TargetType=SAM_LAUNCHER
      ActiveYear=1962
      TargetValue=100
      UseGroundObject=TRUE
      GroundObjectType=SA-3QL
      RepairRate=0.555
      StartDetectChance=20
      StartIdentifiedChance=0
      IncreaseDetectChanceKey=0
      MaxVisibleDist=8000.0
      DestroyedEffect=LargeRocketGroundExplosion
      DestroyedModel=sa-2_launcher_destroyed.LOD
      SecondaryEffect=VehicleFireEffect
      SecondaryChance=100
      also you need to add these:
      SNR-125
      SNR-125M
      SNR-125-2M

      If you need any further help please read the Knowledge Base at:
       
      https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/
      LICENSE:
      You are allowed to use this model and everything included with it for personal non-profit use for Strike fighters 1 and 2. For use outside of this scope, you need to contact me for permission.
      gkabs@gkabs.net
      Big thanks to :
      tiopilotos for requesting these models and for his sound files smoke effect as well as testing.
      Coupi without his input and testing and fixing the INI files, this would have been a dead-end without his help.
      strahi for testing the earlier models.
      yakarov79 for his excellent SNR-125 model
      Software used:
      3d Max 2009
      UVLayout v2 Pro
      Substance Painter
      Adobe Photoshop
      Fuse
      FaceGen
      If you need any assistance please contact me at 
      gkabs@gkabs.net

       
      Submitter GKABS Submitted 07/15/2020 Category Ground Object Mods  
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..