SF/WO* Add-On Aircraft

This is a fictional variant of the F-16 from Ace Combat 3:Electrosphere, using the Mitsubishi F-2A as a base.
 
CAUTION: please read the 'read me' as there are files left out which must be copyed from the F-2A which may be found at http://forum.combatace.com/index.php?autoc...p;showfile=5087
 
 
Thanks to the makers of the F-2A and FastCargo for his method of adding canards
 
Enjoy
 
-CrimsonRoamer

F-16XL Version 2.0
 
Original Model by wpnssgt via Swede
Updated models by Dels, smoothed out the tail section, fixed some animations and the nose. Also all new nozzle work. Thank you Dels.
ini work by moonjumper and usafmtl
Fm by Fubar512
Skins by creepin death
Pit, sounds, effects and drop tanks used with permission from the Mirage Factory.

F-19 Stealth Fighter aka "Flying Frisbee", "Wobbly Goblin" of 16-bit fame remade for SFP patch 3 and WoV.
 
For further info read the included readme file
 
/Jules

F-20C TigerShark
*****************
 
BE AWARE:
 
The F-20C TIGERSHARK pack is a mod of the F-20A TigerShark.
It comes WITHOUT the neccessary file F-20A-R0b.lod
You can get the file from F-20A package available at A-Team Skunkworks homepage.
http://cplengineeringllc.com/SFP1/
 
 
----------------------------------------------------------
I.
 
This is the flyable version of *****s static F-20
 
It represent the F-20C as it was intended as successor of the F-20A.
 
Performance:
Max Speed: Mach 2.1
Acceleration from M0.9 to M1.2 at 30.000 ft in 29 seconds
max turn rate: 20° = 18 seconds per 360° circle
sustained turn rate 11.5°/sec at M0.8 at 15.000 ft
 
Specification:
Length 14,40 m
Wingspan 8,30 m
Internal fuel 5.500 lbs
take of weight clean 17.260 lbs
combat weight 50% fuel 15.060 lbs
max weight 26.290 lbs
 
Engine:
1 x General Electric F404-GE-200
Thrust 49,88 kN dry
70,094 kN Afterburner
 
Armament:
2 x 20mm M-39 cannons 460 rounds
up to 6 AIM-9 Sidewinder
2 x AIM-7
2 x AIM-120
5 pylons with max 8.000 lbs external stores
 
 
 
BE AWARE: the F-20C Tigershark is a high agile plane with a tendency of fast rolling and overrolling. Thatswhy dont move the stick to fast!
 
 
+++++++++++++++++++++++++++++++++++++
II.
 
Known issues:
- the model is low poly (was originaly intended to use as ground target only)
- the skin is relatively simple, upper and lower side of the wings are similar
- airbrakes are not visible
- i used the F-15A cockpit which is the closest available to the F-20C cockpit
- nose gear steering is not animated
 
+++++++++++++++++++++++++++++++++++++
III.
 
CREDITS:
 
I want to say thank you to ***** for the permission and his help to mod his static F-20A Tigershark
The flight model is partly basing of TK's stock F-16A FM
The cockpit is basing on TK's F-15 cockpit
 
 
----------------------------------------------------------
IV.
 
INSTALLATION:
 
-Unzip F-20C files into your objects/aircraft folder.
-Copy file F-20A-R0b.lod from your F-20 into your F-20C folder
-Unzip Decals into your decals folder (If you dont have one, create one into objects folder)
 
That it.
 
----------------------------------------------------------
V.
 
For remarks, comments, bugs, etc please use the forum or send me a PM.
-------------------------------------------------------------
 
VI.
 
The F-20C TigerShark is FREEWARE. COMMERCIAL USE IS NOT ALLOWED!
 
------------------------------------------------------
 
 
Hope you enjoy it.
 
 
Michael (Gepard)
 
 
Made in Germany
November 2010

F-22A Blk 20 Global Strike Raptor by the Raptor Team
Team members:
Dels – Model maker extraordinaire
Jimmybib - Skins
Jat – AIM-9X
kei nagase - Skins
Moonjumper - INI work
Starfighter – FM work
Fast Cargo - Weps Assist
CA_Stary - AB Effects
USAFMTL – Decal work and project manager.
 
Wpnssgt and Fubar for their start on this project.
Installation:
 
Aircraft goes into your aircraft folder
 
Effects go into the effects folder
 
Sounds go into the sounds folder
 
 
AIM-9X bitmap goes into the weapon folder. (You must have the Jul 06 weps pack installed)
 
Add the drop tanks as explained in the CA Knowledge Base. Also included are the Small Diameter Bombs and the JSOW by Fast Cargo. To get the default loadouts you must installed these. We are not responsible for any problems you have by not doing so.
 
Adding weps link at CA
 
http://forum.combatace.com/index.php?showtopic=9323
 
Limitations.
The doors don't open automatically. Use Ctrl - O
Would of loved to of had TVC. But it doesn't exist in game.
There is no opening gun door. We ran out of animation slots.
This is freeware and may not be sold. This may not be distributed to any other s sites but Column5.us and Check-six.
 
Anything I forgot to mention is purely unintentional.
 
USAFMTL
 
www.combatace.com

F-22A Raptor by the Raptor Team
Team members:
Dels – Model maker extraordinaire
Jimmybib - Skins
Jat – AIM-9X
kei nagase - Skins
Moonjumper - INI workStarfighter – FM work
Fast Cargo - Weps Assist
CA_Stary - AB Effects
USAFMTL – Decal work and project manager.
Wpnssgt and Fubar for their start on this project.
 
Installation:
Aircraft goes into your aircraft folder
 
Effects go into the effects folder
 
Sounds go into the sounds folder
 
AIM-9X bitmap goes into the weapon folder. (You must have the Jul 06 weps pack installed)
 
Add the drop tanks as explained in the CA Knowledge Base.
 
http://forum.combatace.com/index.php?showtopic=9323
 
Limitations.
The doors don't open automatically. Use Ctrl - O
Would of loved to of had TVC. But it doesn't exist in game.
There is no opening gun door. We ran out of animation slots.
This is freeware and may not be sold. This may not be distributed to any other s sites but Column5.us and Check-six.
 
Anything I forgot to mention is purely unintentional.
 
USAFMTL

This is a modification of the F22A that I have done. It is the futurist F-22 that appears in ace combat 3 electrosphere. It is faster and it can carry more fuel and ammo. I tried to make it a cockpit like in the game but i couldn't. Enjoy it

I would like to thank usafmtl to allow me to use his work in this mod.

This is the F-23A Black Widow II as if it had won the ATF competition.
 
This is Version 2.0 which now has a fully working 3d virtual cockpit and two extra internal hard points giving a total of 6 AMRAAMs internally.
 
Read the F-23A readme.txt

F-31G Wirbelwind for SFP1,WOE,WOV,WOI
====================================
 
I. This is my mod of Dels F-31A MustangII for use in the first generation sims SFP1,WOE,WOI,WOV
 
II. I decided to make a german bird (thatswhy G for Germany), because the X-31 project was mostly financed by the germans. I also decided to make a more real life combat airplane instead of a test bird. So i switched of the Trust Vector plates and deleted a lot of ammo capabilities, reduced the thrust of the engine. Changed the afterburner emitter. Made some small changes in Flightmodel. I also choosed the F-15 cockpit which is standard in WOE and WOI.
Some changes were neccessary because some features not worled properly in WOE, WOI, SFP1.
 
III. All credits belongs to Dels who made this fantastic bird or SFP2
 
IV This mod is Freeware. Commercial use is NOT ALLOWED.
 
 
I hope you enjoy this mod.
 
Michael (Gepard)
 
Made in Germany Januar 2010
 
 
 
below the original ReadMe file:
 
 
--------------------------------------------------------
ROCKWELL/MBB F-31A MUSTANG II Ver 1.0
--------------------------------------------------------
 
By Dels
 
Dated 25th January 2010
 
********************************************************
MAY BE USED IAW COMBATACE FREEWARE LICENSING POLICY
 
http://forum.combatace.com/index.php?showtopic=26131
********************************************************
 
DISCLAIMER
----------
This is a third party add on of the F-31A using a model
and cockpit created by me.
 
It is designed for and works in the SF2 series of games.
 
VERSION NOTES
-------------
I have created this F-31A as if it went into production
and service during the 90's. So it is the F-31A (not X-31)
and the skin is for the 421st TFS, 388th TFW 'Black Widows'
based at Hill AFB.
 
The X-31 had no official or un-official nickname so I gave
it the name "Mustang II". If you don't like it, feel free to
change the AircraftFullName= in the F-31A.ini file.
 
The cockpit of the X-31 was a little too ancient, so I
modified my F-23A cockpit for this F-31A. This is also
what I would expect from an aircraft of the mid 90's.
 
The cockpit has visible pilot legs which were loaned to
me by Klavs81, so all the credit to him for those.
 
I have taken a bit of artistic licence as not a whole lot
of information was available on the aircraft.
 
In addition to wing and centerline drop tanks, I have also
included a special F-31 Dual Rail Adapter (DRA) for use with
IRM's and AHM's.
 
INSTALLATION
------------
Very simple, extract the files from the archive to your
C:\Users\*NAME*\Saved Games\ThirdWire\StrikeFighters2 folder.
 
Next,
 
You will need to add the following to your Squadronlist.ini
file which should be in your Flight AND Pilot Data folders.
This is so the Unit Names show up. (*NOTE* This is not
essential). Make sure the XXX is replaced with the next
number in sequence in your file:
 
[squadronXXX]
Name=421FS
DisplayName=421st TFS Black Widows
Nation=USAF
 
*NOTE* If you do not have a Squadronlist.ini file in your Flight
folder you will need to extract it from the MissionData001.CAT
file in your Flight folder using the CatPack utility.
 
That's it.
 
You will need Diego's MODUSAF pilot skin for the pilot,
or you can use whatever skin you like by editing the
F-31A_Data.ini file.
 
REMOVAL
-------
Reverse the above steps.
 
CREDITS
-------
Aircraft Model/Skins/Decals, Flare/Weapon positions,
FM and Performance figures, Hangar/Loading/Loadout screens,
and Lighting positions -All me!!!
 
Cockpit Model and Skins -Also all me!!!
 
Klavs81 - Pilot legs in the cockpit
 
Pilot Skins - Diego
 
THANKS
------
Thanks to all on the forum for their continuing and always
useful support.
 
Hope you enjoy it as much as I have had making it.
 
Dels

Gen 1 pack
This his an Boeing F-32 Cutlass II based on Begera3006 darwing
a lot of stuf made up by me basing my self on real life X-32 like the STOVL engines the rest like loadouts are base on discussion here at CombatACE
FM should consider has beta or just standing since i dont know a thing about FMs just how make planes fly whit cipy paste work!
skin cloud better in outher hands try my best but ran out of patience sorry!
Cockpit his from Dels´s Black widow
all weapons are on Gunny weapons pack
decal are stock
model, skin and ini edits by me Cocas
cockpit by Dels
F-35 bits like sounds,pilot and Efeects need and not included in this pack
to install just drop the F-32 folder on you WoX etc objects\aircraft folder
Cocas
 
ps some ini edits maybe need for full compatablity whit WoX i dont a gen install at the moment

F-35 Lightning II Joint Strike Fighter Version 2.2 BETA Release
A USAF Version
B USMC Version
C USN Version
 
for the SFP1/WOx series beta Version 2.0
 
With thanks to Dave, JSF Aggie, JAT81500, Amokfloo, and especially FastCargo
 
This is a Beta Release, I have to appologize that I simply don't have the time at present to finish up the cockpit, but I hope to have it finished someday! Meantime, I'm happy with the flight model, radar and weapon delivery, I'm afraid the AI is somewhat lacking when it comes to engaging with AA missiles from the weapons bays.
 
Templates are included.
 
A few notes about flying the F-35:
 
This model has only been confirmed to work in 1st Generation TW Sims (SFP1/WOx). It has not been fully tested in 2nd generation sims (SF2,SFV).
 
The AI still has problems in hard mode doing an approach to landing in the A and B models. We are still working on that.
 
The B model VTOL mode has been made to be very similiar to the real thing in terms of performance. What that means is don't try VTOL mode fully loaded out...you won't get anywhere...literally. Plan to be publically ridiculed if you post a question on the forum asking how to do to a vertical takeoff fully loaded.
 
Also, the real thing will not allow you to engage afterburner in VTOL...this limitation was not possible to implement in the TW sims. What that means is if you go to afterburner while in VTOL mode...bad things will happen VERY quickly.
 
Speaking of the B model, for some reason, the nozzle will not animate open or closed. Several things have been tried to get it to work with no success...we are not sure why this is broken, especially since it works in the other models.
 
To install:
 
Effects in the Effects folder
Objects in the Objects folder
Sounds in the Sounds folder
 
Please do not release modified files for this aircraft without my written consent, you are welcome to release any skins you like using the included templates. As always, any use of this mod for commercial ventures is strictly prohibited unless included in a future official Thirdwire Release.
 
The creators of this mod are not responsible to any damage to hardware or software as a result of installation. As always: BACK UP YOUR FILES!!!!!!!!!!!!
 
Constructive criticism is always appreciated, but please be nice; I'm emotionally delicate, like a flower.
 
Clear Skies and Check Six!
 
-Adam Burch 22 May 2009
 
The USN and USMC skins are basically up to the end user to make what they like. I will more than likely sponser another contest at CA for the best skins for the F-35B/C versions.
 
Dave (USAFMTL) 22 May 2009
 
Version 2.1
 
Several bugs fixes by FastCargo, added Klavs81 new cockpit.bmp and new hangar and loading screens.
 
Dave (USAFMTL) 24 May 2009
 
Version 2.2
 
F-35C sound fixed.
 
Various ini fixes by Crusader
 
Dave (USAFMTL) 29 May 2009
 
Version 2.3
 
Fixed gun naming issue.
 
Dave (USAFMTL) 3 Jun 2009

The VF-74 Be-delivers at NAS Oceana became the first deployable Phantom squadron when it received its F4H-1s (F-4Bs) on 8 July 1961.This add-on is based on the stock F-4B and represents an early F-4B of VF-74, with:
 
- New,Hi-res cockpit
- Fletcher fuel tanks
- Early J79GE-8 Engines
- Typical early F-4Bs weapons options
- And a few other details, you 'll see...
 
Changes of v1.01:
- Hangar screen is ok now
- Corrected Loadouts
 
You need to download the Fletcher Fuel Tanks from here:
 
http://forum.combatace.com/index.php?autoc...;showfile=6595 
 
NOTE:As I am informed, it has been impossible to remove the sidewinder racks, so we have to live with them
 
Changes of v1.2:
- New correct Hi-Res skin by Sundowner
- New Hangar and Loading Screens
 
 
The real credits should go to:
 
- mppd
- Streak Eagle
- Batman1978
- Spillone
- Sundowner
 
Also thanks to ravenclaw_007 for his feedback.
 
IMPORTANT NOTE: This is a freeware!

F-4Cs – 8thTFW Ubon Operation Bolo - By Crab_02 and Mike Druzolowski
 
53 F-4C serial numbers which actually operated with the three squadrons of the 8th TFW at Ubon as of 01 January 1967. From these were drawn the aircraft to fly Col. Robin Olds' famous Operation Bolo mig killing mission the next day on 02 January.
 
Description: This package is two parts – a texture add-on for the 1966 F-4C pack available at CombatAce for the 433rd/497th/555th TFS which is the bulk of the serial numbers assigned in Jan 67, and a separate aircraft representing the "slicknose" variant of the F-4C seen at this time. Enclosed are two QRC-160 ECM pods attached to the left outboard pylon (the pylon does not appear when the ECM pod is assigned in a mission as it does when A/G ordnance is selected, so the pylon is attached) – one is camouflaged and the other white. Wing tanks are available in the 1966 F-4C pack. Also enclosed is an update to the 1966 base .LOD and wing tank texture updates. (Hey…I said that this was an ongoing project didn’t I….?) The new loadout.ini files have a [AirToAirLongRangeBolo] entry that can be used for a Bolo mission. Oh, and I made the ECM pod/pylon match the same weight/drag as the opposite wing tank so the bird flies straight – although when the tank is jettisoned you’ll be loaded asymmetrically again…..
 
Historical bit: FY1964 USAF F-4Cs coming off the production line for USAFE had the F-4J-style nose radome installed, and these started to become available to PACAF units late in 1966. This radome gave a small performance enhancement due to a bit less drag, but was removed early in 1967 as the AN/APR-25 radar homing and warning system was installed into the old IR-sensor housing. It is estimated that perhaps a quarter of the F-4Cs at Ubon at the time of Operation Bolo were configured this way, so the airplanes are not broken down by squadron. The airplanes flown for Bolo from the Wolfpack still retained the 1966-style Navy LAU-17 inner pylons (although one source that I found said that only F-4Cs with the new MAU-12 pylons were flown for Bolo, but photographic evidence tends to disprove this). All of these planes were modified to carry a single QRC-160 ECM pod on the right outer pylon (seen on the USAF A/G weps pylon as well as the early Navy pylon with the adapter (the latter is not presented here), and a single 370 gal drop tank on the left outboard station for the mission, and this became standard in Southeast Asia during much of 1967, until the inboard pylons were modified to accept the pods later in 1967.
 
As before, I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are again 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.
 
My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots, and to X Ray who did the superb pilot repaints (and whose name keep forgetting in the readmes).. Also my thanks to Mike France and Alan Howarth who know more about F-4s than I ever will!
 
Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.

By popular request this is the addon F-4C complete with 15 [!!] SUU11B gunpods, it uses the stock TW model but be sure to read the readme......its for your benifit, trust me. :yes:

F-4C 1965 Version 2- By Crab_02 and Mike Druzolowski
 
***This corrects several small issues. I have also included serial numbers for a third unit – the 45th TFS, which is famous for getting the USAF’s first mig kills in Southeast Asia. Please overwrite all previous files. Sorry for any inconvenience!***
 
This project started out with my early attempts to make the stock WOV F-4s a little more authentic. Crab_02 eventually contacted me and kindly shared his Phantom II update project with me, which is what this is based on. All credits go to him, without his basic work, help and guidance in learning 3D modeling, I never could have come this far. Our continued thanks to TK and Third Wire to allow us continued freeware development of his work.
 
This first model will form the basis for every subsequent F-4 variant that flew in Southeast Asia (and hopefully, beyond). Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.
 
I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.
My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots, and to X Ray who did the superb pilot repaints (and whose name was forgotten in the original readme of the 1965 version).
 
Description: The airplane depicted is the Air Force F-4C as it appeared in 1965 during its combat debut in Southeast Asia - Navy LAU-17 pylons with adapters for A/G ordnance, no radar homing and warning antennas nor all of the small antennas added later on.
New features include:
*New vertical stab and rudder shapes
*New nose radome and IR sensor housing shapes
*New detailed pylons and Sidewinder rails
*New 3D model cockpit (mostly invisible though...)
*New nose wheel doors
*Animated air refueling door (Shift + 8)
*Opening canopies of course (Shift + 3)
*New horizontal stab bases
*New early McAir and later Fletcher wing tanks (with pylons that correctly jettison along with the tank) plus new centerline 600 gal tank with retained pylon
*Numerous small detail changes
(Note that all textures for the stock Thirdwire F-4s can be made to fit with minor alterations - watch leading edge flap, vertical stab/rudder and intake splitter plate locations mostly.)
 
Issues: I used many parts that I already had built, so separate bmps are included for the pylons, nose and rails - these should have been combined into one I guess.
 
Historical bit: Five USAF F-4C squadrons of Tactical Air Command rotated TDY to Southeast Asia during 1965 as follows:
*45th TFS, 15th TFW MacDill AFB TDY to Ubon RTAFB April to August 1965
*47th TFS, 15th TFW MacDill AFB TDY to Ubon RTAFB July to November 1965
*68th TFS, 8th TFW George AFB TDY to Korat RTAFB August to December 1965 (acft remained
to form the 433rd TFS at Ubon)
*431st TFS, 8th TFW George AFB TDY to Ubon RTAFB August to December 1965 (acft
remained to form the 497th TFS at Ubon)
*43rd TFS, 15th TFW MacDill AFB TDY to Cam Rahn Bay AB October 1965 to January 1966
All originally carried the gull grey/white scheme as factory applied - similar to the Navy F-4B but with markings differences (especially no intake walkways or splitter plate turbine warning markings). The FJ- "buzz" numbers were removed from all aircraft USAF wide from ca. September 1965, and then the three-tone camouflage scheme was locally applied in SEA from November 1965 through ca. January 1966. The 68th TFS aircraft are depicted as they arrived at Korat (with FJ- fuselage buzz numbers and TAC vertical stab insignias). The 431st TFS is depicted as aircraft looked at Ubon late in 1965, after the buzz numbers were removed and several had the TAC insignia removed as well. Few personal or squadron markings were seen.
 
Notes about the flight model: Basically the default post Oct 08 patched data.ini, but I have modified the landing gear rolling coefficient to have a bit more drag (the plane will not move by itself and take off like a rocket when the brakes are released!), I have reduced the wheel braking effect so that a few taps will not make the thing stop on a dime (however they will not hold the plane in place when the power is brought up to over 78% - adjust as desired, and I have increased the speed brakes effect to a more realistic effect (to me). The original values have a triple slash in front of them, so modify as desired if you don't like my changes.
 
Cockpit notes: Uses the stock post Oct 08 patch WOV cockpit, but I have added a sight reticle which is a brighter orange - matches photos I have seen a bit better I think.

F-4C 1966 – Da Nang & Phan Rang AB - By Crab_02 and Mike Druzolowski
 
**Notice - this package is for the die-hard rivet-counting historian. No colorful squadron markings or tailcodes onthese planes as they flew during 1966**
 
Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.
 
I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.
My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots, and to X Ray who did the superb pilot repaints (and whose name was forgotten in the original readme of the 1965 version).
 
Description: The airplane depicted is the Air Force F-4C as it appeared in 1966, after the first USAF three-tone camouflage scheme was field-applied - Navy LAU-17 pylons with adapters for A/G ordnance were still in evidence (as per the 1965 package), no radar homing and warning antennas nor all of the small antennas added later on. Four styles of 370 gal drop tanks are available - both old McAir and later Sgt Fletcher style, in either all-white or camouflage. The planes have the initial camo paint scheme applied to the early F-4Cs (still with the Navy-style LAU-17 pylons) and typicaly had the rear fuselage camouflaged all the way to the drag chute door. Aircraft often carried a minimum of stenciled markings.
 
New features include:
*New vertical stab and rudder shapes
*New nose radome and IR sensor housing shapes
*New detailed pylons and Sidewinder rails
*New 3D model cockpit (mostly invisible though...)
*New nose wheel doors
*Animated air refueling door (Shift + 8)
*Opening canopies of course (Shift + 3)
*New horizontal stab bases
*New early McAir and later Fletcher wing tanks (with pylons that correctly jettison along with the tank) plus new centerline 600 gal tank with retained pylon
*Numerous small detail changes
 
(Note that all textures for the stock Thirdwire F-4s can be made to fit with minor alterations - watch leading edge flap, vertical stab/rudder and intake splitter plate locations mostly.)
 
Issues: I used many parts that I already had built, so separate bmps are included for the pylons, nose and rails - these should have been combined into one I guess.
 
Historical bit: TAC's 366th TFW at Holloman AFB, NM transferred one Phantom II squadron to PACAF in 1965, the 390th TFS (officially transferred to PACAF's 6252nd TFW at Da Nang as of 29 October 1966), and arriving ca. 17 November (moving with grey/white F-4C aircraft, which were soon field-painted in the new three-tone T.O.1-1-4 camouflage scheme). Photos of these recently camo'ed aircraft show undersurfaces untouched and still retaining the large star and bar and USAF. The unit was joined at Da Nang by the 480th TFS as of 01 February 1966, which arrived already painted in the new camouflage scheme. As of 08 April 1966 the 390th TFS was assigned, and the 480th TFS was attached to the 35th TFW at Da Nang. Due to overcrowding at Da Nang, the other Holloman F-4C squadron - the 389th TFS, (which had been deployed TDY to Elmenfdorf AFB, Alaska in late 1965) moved with already-camouflaged F-4Cs to Phan Rang AB along with the transfer of the 366th TFW to PACAF as of 14 March 1966 (although with none of the same airplanes it flew in Alaska). As of 10 october 1966, all three squadrons were again re-united at Da Nang under the 366th TFW.
 
Color photos are somewhat rare for these airplanes during 1966, but it seems that the last two serial number digits may have been painted in red on the front nose gear door for all three squadrons. (It is possible that the squadron color was eventually used during 1966, but I have no evidence of this yet). There is some variation from plane to plane as to vertical spacing on the tail of the "AF" and the serial number, so I have tried to reproduce this. Several 480th TFS F-4Cs had the serial presentation as "USAF" instead of the more common "AF" as well. Stencilled markings varied from a lot to a little.
 
Notes about the flight model: Basically the default post Oct 08 patched data.ini, but I have modified the landing gear rolling coefficient to have a bit more drag (the plane will not move by itself and take off like a rocket when the brakes are released!), I have reduced the wheel braking effect so that a few taps will not make the thing stop on a dime (however they will not hold the plane in place when the power is brought up to over 78% - adjust as desired), I have increased the nose gear spring factor to give it a bit more of that “springy” feeling when the brakes are applied, and I have increased the speed brakes effect to a more realistic effect (to me). The original values have a triple slash in front of them, so modify as desired if you don't like my changes.
 
Cockpit notes: Uses the stock post Oct 08 patch WOV cockpit, but I have added a sight reticle which is a brighter orange - matches photos I have seen a bit better I think.

F-4C 1967 – 8thTFW Ubon - By Crab_02 and Mike Druzolowski
 
80 F-4C serial numbers which actually operated with the three squadrons of the 8th TFW at Ubon during 1967.
 
Historical bit: The three squadrons of the 8th TFW at Ubon RTAFB adopted tailcodes on their F-4C Phantom II aircraft from at least July 1966. By early 1967 the F-4Cs within the theater had been modified with the addition of AN/APR-25 RHAW gear visible as a housing on the vertical stab above the rudder, and had received the new Air Force MAU-12 intermediate (inner) wing pylons. Some serial numbers are repeated for the different squadrons as many transfers between squadrons occurred during the year – so be careful that you don’t fly the same airplane numbers at the same time if interested in being historical. Some aircraft were seen carrying all olive drab 370 gal wing tanks, so those are presented here. Also a camouflaged centerline 600 gal tank sometimes seen is here too. Almost all airplanes seem to have had the original 6-inch serial number on the vertical fin painted out with olive drab paint. Mig kill markings were carried over from previous units (the 497th eventually ending up with most of them). Some 497th TFS planes seem to have had red nosewheel door numbers, but photos show that most other squadrons had none.
I made this package for the post-October 08 patched version for Wings over Vietnam (which is what I'm flying). Textures are again 1024 pixel resolution to help frame rates on modest systems (like mine) - so view the external views at arm's length, not extremely close-up please. Versions for SF2 with higher resolution textures are sure to follow.
 
Description: The airplane depicted is the Air Force F-4C as it appeared in early 1967 or later in Southeast Asia – Air Force MAU-12 pylons, tail fin tip radar homing and warning antennas and several other small antennas added, three tone camouflage and tailcodes.
New features include:
- New vertical stab and rudder shapes
- New nose radome and IR sensor housing shapes
- New detailed pylons and Sidewinder rails
- New 3D model cockpit (mostly invisible though...)
- New nose wheel doors
- Animated air refueling door (Sift + 8)
- Opening canopies of course (Shift + 3)
- New horizontal stab bases
- Camouflaged Fletcher wing tanks (with pylons that correctly jettison along with the tank) plus new centerline 600 gal tank with retained pylon
- Numerous small detail changes
 
Note that all textures for the stock Thirdwire F-4s can be made to fit with minor alterations - watch leading edge flap, vertical stab/rudder and intake splitter plate locations mostly.
 
Issues: I used many parts that I already had built, so separate bmps are included for the pylons, nose and rails - these should have been combined into one I guess.
 
My sincere thanks (in addition to Crab and TK) go to Sundowner - who originally shared his F-4 texture templates with me and what I started with originally, and also to drdoyo for his 1024 templates which helped, Ravenclaw_007 for the kind permission to include his super Martin Baker ejection seat in this package, and to Old Diego for kind permission to include his superb pilots. Also my thanks to Mike france and Alan Howarth who know more about F-4s than I ever will!
 
Please contact me for any problems or issues - we'll do our best to correct them and make this even more authentic for what's to come. PM me at Combatace or E-mail at mppd@att.net please.

F-4E 2020 Terminator by Sundowner and others. Uses The Mirage Factory weapons packs.
 
Just put into your objects/aircraft folders and go fly.
 
Warning "UBER HIGH RES" skins. If you have a weak system, don't bother running it.
 
Enjoy
 
USAFMTL

F-4E Phantom II AUP, Hellenic Air Force Mod
 
A Stand-Alone aircraft for WoI (but usable in ALL versions of the game - read on!)
 
This package will create a complete, 'nation specific' aircraft; the F-4E Phantom II AUP as used by the Hellenic Air Force. Right now, it uses the WoI avionics70.dll, and has a fully functional HUD, CCIP, multi-mode A-A radar, and a Ground Mapping radar. As you all should know by now, the GM radar ONLY works in WoI with the HUD and whatnot. This aircraft, however, IS still usable in SF/WoV/WoE, with a modified avionics ini, which I've supplied. Full instructions are in the "To Install" section below.
 
This a completion of a pack started by Sundowner, and he supplied me with the Hi-Rez Ghost skin, and a bunch of inis, along with the Ghost Gray camo 370 & 600 gallon drop tanks -- you WILL be adding these, so get your Weapons Editor warmed up!!
 
-- NOTE: these are HI-REZ skins; 2048x2048. For those with older, slower machines or those with smaller vid cards, you might want to resize the skin bmps down one step to 1024x1024. You =WILL= loose some detail, but it's a trade off you sometimes must make. --
 
All I've basically done, is some ini tweeks for loadouts and some extreamly small changes. They ARE correct serials as issued to these Phantoms, but I cannot claim 100% historical accuracy as to which squadron had which number set.
 
A new Hangar screen is included, based of Ant's original; it's WoI style one, even though I've left the SF/WoV/WoI style in, for when the Patch comes out for those other games, you can just use that one. It's called "woe_F4E_HAF_Hangar.bmp". So, you can choose, depending on your game, which to use.
 
It is set up to use either of the weapons paks; the Bunyap Pak or Mirage Factory, or even NONE at all!!!
 
Remember: this is designed for use in WoI =ONLY=, because at present, it's the only avionics70.dll that supports HUD/CCIP and Ground Mapping radars. It is probably usable in the others, but not with the WoI-style avionics ini. To that end, I've created an SF/WoV/WoE version, called -obviously- "woe_F4EAUP_AVIONICS.INI". See install instructions for further information. If used in anything OTHER than WoI, it is reccomened you use this modded ini, or run the risk odd game crashes.
 
I'd like to thank Sundowner for trusting me to complete and release this package. Ant gets 98.6% of the credit; the remainder is mine! After all, he DID all the hard work with the skin; and I gotta tell ya, the detailing on it is superb; as we've come to expect.
 
Make double-damm sure you read the enclosed readme -- it's there for your convience!!!
 
Happy Hunting!!!
Wrench
Kevin Stein

This model illustrates the F-4E Phantoms that the Israel Defense Force/Air Force received in October 1973 during the Yom Kippour War.
 
Credits go to:
 
- The MIRAGE FACTORY
- THIRDWIRE
 
Thank you Wrench and Sony Tuckson!
 
It'll be better if you install the Mirage Factory Weapon Pack for WOI, available at CombatAce:
 
http://combatace.com...oi-august-2008/
 
Only for WOI
It could work with SFP1, WOV and WOE installs but it won't be as good unless you do some editing.
 
Freeware only

F-4E Phantom II, Hellenic Air Force Mod
 
A Stand-Alone aircraft for SF/WoV/WoE/WoI
 
This package will create a complete, 'nation specific' aircraft; the F-4E Phantom II as used by the Hellenic Air Force. This is a stock, standard or garden variety Rhino, and NOT the AUP version currently flying with the HAF (see Notes below for my begging!)
 
This is a completion of a pack started by Sundowner, and he supplied me with the Hi-Rez Agean Blue skin, and a bunch of inis, along with the Agean Blue camo 370 gallon drop tanks -- you WILL be adding these, so get your Weapons Editor warmed up!!
 
The other skin, also by Sundowner, is the USAF SEA 3-tone; this is the paint scheme used as first delivered. It is set as the 2nd skin in the list, even though historically it should be first.
 
-- NOTE: these are HI-REZ skins; 2048x2048. For those with older, slower machines or those with smaller vid cards, you might want to resize the skin bmps down one step to 1024x1024. You =WILL= loose some detail, but it's a trade off you sometimes must make. --
 
All I've basically done, is some ini tweeks for loadouts and some extreamly small changes. I also remade the serial number decals, as I couldn't exactly match Ant's font, extending the numbers out to a total of 24. They ARE correct serials as issued to these Phantoms, but I cannot claim 100% historical accuracy as to which squadron had which number set. Also, out of sheer laziness, both skin sets use the same decals - why waste good decals? That's my motto!!! :)
 
A new Hangar screen is included, based of Ant's original; this one's for SF/WoV/WoE. There's also a WoI style one, called "woi_F4E_HAF_Hangar.bmp". So, you can choose, depending on your game, which to use.
 
It is set up to use either of the weapons paks; the Bunyap Pak or Mirage Factory, or even NONE at all!!! As it is a complete aircraft, it should also be usable in WoI, I've tested it in ALL iterations of the game, it works just fine. In fact, I like the newer 'jetengine' sound in WoI better than the SF/WoV/WoE version!!
 
I'd like to thank Sundowner for trusting me to complete and release this package. Ant gets 98.6% of the credit; the remainder is mine! After all, he DID all the hard work with the skin; and I gotta tell ya, the detailing on it is superb; as we've come to expect.
 
PLEASE read the enclosed readme for more, detailed instructions. Of course, there's the usual noise in the Notes section.
 
Sundowner
 
Wrench
kevin stein

This is the almost-finished 2020 Terminator that was left in my HD for more than a month.I was stuck in making the right skin (I admit I am not good at it)and it was left unreleased.Now I want to offer it to you the way it is, because if not now it doesn't make any sense later.I use the seytan skin from EVRO, sounds from SPILLONE and the avionics are using elements from the F-4ES mod of ULTRAMAX.
 
Please have latest weapon packs installed.
 
I have in my HD a few more projects, that is a
 
- Lightning F.2A
- An updated F7U
- A Kurnass 2000
- various MiG-21s and J-7s
- F/A-18 upgrades
 
I am going to release them soon, unfinished or not doesn't matter, 'cause I feel is better to just release them and let someone else improve them.If someone else is working on such projects, please let me know, and I would gladly give you my work before release, as long as I am mentioned.

F-4E-35 by Crab_02
469th Skin by Crab_02
IAF skin by Sundowner
Original 3D model by Thirdwire
3D model modifed by Crab_02
Loading and Hanger Screens by USAFMTL
 
You will notice the nose gun is different than the later versions of the F-4E. Capt Steve Rithcie used the -35 to achieve some of his A2A kills.
 
http://geta-o.maxs.jp/USMIL/F/F-4/F-4E/F-4e(ed)68376-sm5.jpg
 
Crab will be doing his aircraft so please refrain from skinning it out of courtesy to him. Thank you
 
To Install just drop into your main AIRCRAFT folder and go fly.
 
Enjoy.
 
USAFMTL

JSDAF by Sundowner and Bunyap w/ USAFMTL as crash test dummy. Complete with aircraft and 10 skins! Pakcage weighs in at 43 MB. You have to see the skins to beleive the work that went into it.

F-4EJ Kai Phantom II
 
Skins by Sundowner
Screens/Testing by USAFMTL
Avionics by Chaser617
Model/Cockpit by Bunyap