SUBCATEGORIES
- US Origin
- French Origin
- Soviet Origin
- UK Origin
- German Origin
- Japanese Origin
- Italian Origin
- Other Origin
-
IAR 80/81 REDUX PACK
By Trotski
IAR 80/81 PACK.
I was not originally going to release this pack, as I was unsure of the reaction to a relativley unknown ( unfortunately ) Fighter. but after the relative success of the PZL's I uploaded last week, I though it would be nice to send these IAR's your way too. The IAR's were only ever used by the Romanians, and was in service until the early 50's so that in itself speaks volumes about this rather attractive aircraft.
Anyway, this is a slight rework of Pasko's IAR 80A and 81C, I have also included a <cough> alternative and completely "What if" IAR 80P I shall let you look and see at to what THAT is all about !!!
So, the details, I have edited the original skins, and have reworked ALL the decals, I have added the stencilling as accurately as I could, but there maybe a few errors here and there in the actual positioning of them, as finding detailed pictures of the type is just not there. The stencilling is very sparse, so I think I have got it mainly right ( I hope !! ) I have updated the sounds, and the weapons loadouts, as for some unknown reason, the original bomb loadouts were wrong, So the 80A now carries ONLY 2, 50Kg bombs under the wings, and the 81C has the centreline 250Kg and 2, 50Kg under wing bombs. The 80P however has the original loadout, because why not, it is a "What if" innit hehehehehe. The "real" IAR's in this pack carry German weapons, and are armed with for the 80A 6, 7.9mm FN Brownings, and the 81C has 2 MG151 20mm,s and only 2 of the FN Brownings . The 90P's are armed with ITALIAN bombs, 50, 100, and 250 KG's and gun armament comprises of 4, Breda SAFAT 7.7 mm MG's and a pair of Breda SAFAT 12.7mm MG's.
All the markings have been replaced from the original ones, which I found too bright and "in yer face" and then I added on the differing markings from later years.
Everything is included in the pack, aircraft, decals, guns, pilots, weapons, and sounds. I have boxed everything up so it just a drag and drop kinda deal. One point though, please please PLEEEEEEEEEEEEEEEEZE ensure that the file GunBarrel20mm is in the Pilots folder, or else you will end up with a very odd looking aircraft ( this is for the 81C. ) I also swapped out the Cockpit, as the faux Spitfire one looked awful, so it is now the YAK 9 one instead, not accurate, as all the dials are in Russian, but it does look better.............Well in my humble opinion it does at least. All the sounds I used are in the sounds folder, including the sounds for the guns.
That as they say, is a wrap.
I forgot to credit Starfighter, for the Yak Cockpit, apologies to him for that ommision.
AS ALWAYS...........................ENJOY !!!
70 downloads
-
PZL P11C REDUX
By Trotski
PZL P11C.
A makeover of Zur's P11C, redone skins, for 3 Polish and 2 Romanian aircraft, updated sounds, weapons and of course the pilot.
Everything is included in the file, Sounds ( including the one for the guns) Guns, Weapons, Pilot, and of course the Decals.
I was going to do Latvian, Hungarian, and Soviet skins, however as the Latvians and the Hungarians only had one aircraft each, I thought this rather pointless, as for the Soviets, they only had about four or five, I assume the Germans had a couple as well, but in reality, only Poland and Romania used the type operationally.
These are NOT the DAT/A-TEAM aircraft, they were originally done by ZUR for SF1, the DAT ones are a totally different model and LOD.
As always...........ENJOY ....................
66 downloads
(0 reviews)0 comments
Submitted
-
SF2 P-51D/K Mustang by Crisis Remod Pack
By Wrench
SF2 P-51D/K Mustang by Crisis Remod Pack 1/28/2024
-For SF2, Any and All-
Another 1stGen Salvage Project...
This is an SF2 Remod of P-51D Mustang by crisis. Historically this was one of the first aircraft mods released for SF1 in approx 2008. While the model still has some issues (see "Notes"), it's fully functional, and has been upgraded for the SF2 environment. I believe this will be a complimentary aircraft for the stock 3W Mustang (and others).
This mod is supplied with just about all the original skin sets I could find from the 1stGen SF mods section and from Marcfighters archive. Unfortunately, several were not up to snuff, with inaccurate coloration, or had painted-on markings that make it impossible to allow the use of the superb 3W decal system. Therefore several, while replicating the originals, are new builds. These were made from a new template, and it is included. These skin sets cover US Army Air Force (WW2 ETO), USAF (post-war), Korean War units for the USAF, RoKAF, SAAF, and Israeli Air Force directly post-WW2 and during the 1956 Suez Crisis.. Several of the included skins make use of decal sets I created for other mods, as you all know how I hate to waste good decals!!! :)
You will find herein ...
USAAF/USAF:
362nd FS,357th FG (ETO) -1944 start date (NMF)
375th FS, 361st FG (ETO) -Sept, 1944 start date (Camo/NMF/Invasion Stripes under wing/fues)
"USAFSilver", Generic NMF -10/1947 start date
12th FBS, 18th FBG (Korea) -1950 start date
SAAF:
2 Sqdn, SAAF "Flying Cheetahs" -1950 start date
IDFAF:
No.101 Sqdn (NMF) -1948 start date
No.116 Sqdn Blue/Brown Camo (1956<) -Suez Crisis camo scheme
RoKAF:
51st PFS* (ROKAF) -Korean War. #18 is Col. Dean Hess' aircraft, with nose art
*=Provisional Fighter Squadron
98.6% of the markings are decals, with some small exceptions (see notes). Decal randomization is TRUE.
While many skins had to be remade, some are still 'as issued' (un-retouched). All remain in bmp format. As is usual, serial numbers & 'plane in squadron letters' (WW2 & Korea) are as historically accurate as possible. Those fully 100% matched are marked with the star (*), those correct, but unable to match to a individual code letter are marked with the plus/cross (+), those with no mark are generic.
For those units listed in the game's SquadronList ini, my (patent pending) 'fake SqTail' decal is used to activate their name displayed on the Loadout screen. The SF2 'date switch' is used for all services on their respective skin sets.
Sounds and drop tanks are included. All weapons used are also included. If you End Users (tm) have the SF2I expansion that adds the Mustang and WW2 era weapon, feel free to edit the loadout ini to use those stock in-game 3rd Wire items. The data ini has been brought up, as much as possible, to current standards. The FM test drives as fully compatable with SF2.
When in-game, you'll see
P-51D/K Mustang (cr)
on the Aircraft Selection dropdown. This "(cr)" will differenize this one from the 3rd Wire or Wolf357's (and variations thereof). This mod DOES (sorta) cover both the D & K variants, as there's very little (actual) difference between them (one built in Inglewood, CA -D; the other in Dallas, TX -K; albeit with a different prop). Canopy acutation uses the Standard Animation Keystroke (tm), Shift/0.
As is always reccomended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. Also, give the "Notes" a browse, as it explains certain issues this model has, and the change logs.
Good Hunting and Happy Landings!
Wrench
Kevin Stein
118 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk12 early & late
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA, project development, textures editing and decals
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
JeanBa : special credit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk12 early
- Spitfire Mk12 late
120 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk12
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA, project development, textures editing and decals
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk12
266 downloads
(3 reviews)0 comments
Updated
-
FW-190 D13
By torno
FW 190D, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cabin with 4 historical skins, plus one without insignia, to fly it with the nation you want, the new luftwaffe pilot (there are 2 lods, one with glasses and one without glasses, by default the pilot wears glasses). I included all the weapons of the model F
I hope you enjoy it, more information in the readme file.
Sorry my English is bad
TORNO.
192 downloads
(1 review)0 comments
Submitted
-
SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench
By Wrench
SF2 A-26C Invader Pak (Revamped) by Bobrock, Gerwin & Wrench 3/5/2023
= For SF2, Full-5 Merged (Reccommended/Preferred) =
*Note: This a semi=major overhaul of the original A-26C released in 2013. Gerwin has reworked many aspects of the model, and THIS MOD WILL REPLACE ALL OTHER EARLIER VERSIONS!!! You are advised to move, remove, or delete any other versions of this you have in any/all mod folders. This new packaging covers the WW2 and post-war time frame. *
*Note: (again!) In 1947, the "A" for "Attack" designation was removed from use, and the A-26 Invader renamed to B-26 Invader (for Light Bomber Squadrons). Also, with the retirement of the Martin B-26 Marauder after WW2, the number was "open for reuse". However, the displayed name on the Single Mission screen will read "A-26C Invader"; as that's what it be. BTW, this is the GLASS NOSED bomber version, with working Norden bombsight. Instructional PDF included.
The revamp is supplied with 3 skins:
552nd BS, 386th BG, 9th AF ETO (1944 start date)
13th BS, 3rd BG (<1950) Korean War Era
Generic NMF for any time period (10/47 start date)
All skins are "natural metal", some with painted on national or squadron markings. The Generic NMF marking are ALL decals, and carries post-1947 USAF markings. The serial/Buzz numbers =ARE= correct for this aircraft, but represent no particular unit. This is true for the WW2 skins serials as well. The SF2 "Date Switch" is active, and will change from the WW2 to the post-war skin in October 1947.
Weapons are =NOT= included; all stock items are used.The engine sound are included, it's been switched to the AvHistory R2600 x2 wav. Each skin has its own Hangar Screen.
This aircraft is also equipped with a fully functional bombsight/bombadiar position. Included is Kesselbruts pdf on "How To Use the Bombsight". I'd suggest reading it however many times it takes, and to practice, Practice, PRACTICE!!! using it on the Bombing Range Terrain.
The canopy opens with the Standard Animation Keystroke (tm), Shift/0.
When 'in game', you'll see
A-26C Invader (BRG)
on the Aircraft Selection Drop down menu. This, also, will help to differentiate the aircraft from any other Invader you may (or may not) have. It stands for "Bobrock/Gerwin" as they did the real heavy lifting.
As always, fairly easy to follow, yet detailed install instructions are included. So, please read them. Also, give the "Notes" section a read too.
Good Hunting!
Wrench
Kevin Stein
from the KAW Team, circa 2013
761 downloads
-
Spitfire Mk6b / b Trop
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk6b
- Spitfire Mk6b Trop
138 downloads
(2 reviews)0 comments
Submitted
-
FW-190D
By torno
FW 190D, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cabin with 8 historical skins, plus one without insignia, to fly it with the nation you please , the new pilot of the luftwaffe (there are 2 lods, one with goggles and one without glasses, by default the pilot has glasses). I included all the weapons of the F model (THE ER4 MULTIPLE LAUNCHER THAT BY ERROR I WAS NOT INCLUDED IN THE FW190F PACKAGE) even if this model only carries a bomb or 2 models of disposable tanks.
I hope you enjoy it, more information in the readme file.
Sorry my English is bad
Torno.
276 downloads
(5 reviews)0 comments
Submitted
-
FW-190F
By torno
FW 190F, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 3 historical skins, the new luftwaffe pilot (there are 2 lods, one with goggles and one without goggles, the pilot with goggles is worn by default). and many weapons used by this bird (including the disposable wing tanks of the FW190G version)
The F variant had the same blown canopy as the late versions of the FW190D series and is a specialized ground attack aircraft.
I hope you enjoy it, more information in the readme file.
Sorry my English is bad
Torno
227 downloads
-
Seafire Mk3 (2021)
By Cliff7600
--------------- Seafire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Ravenclaw_007 : rocket ini
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis. New rockets 3D models and new weapons system ini.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Seafire Mk3
- Seafire L Mk3 w PTO skins
- Seafire Mk3 hybrid (Air Spotting Wing)
- Seafire Mk3 Irish Air Corp
- Seafire Mk3 French Navy
171 downloads
(1 review)0 comments
Submitted
-
Seafire Mk1b & Mk2c (2021)
By Cliff7600
--------------- Seafire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Seafire Mk1b
- Seafire Mk1b w Vokes filter
- Seafire Mk2c
- Seafire Mk2c w Vokes filter
- Seafire LF Mk2c
116 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk5c Trop (2021)
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin, inis and decals.
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk5c Trop
- Spitfire Mk5c Trop 4 cannons
Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.
135 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk5b Trop (2021)
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk5b Trop
- Spitfire Mk5b Trop w Aboukir filter
Note : Turkish and Egyptian decals folders are common to both Mk5bT and Mk5cT models.
128 downloads
(0 reviews)0 comments
Submitted
-
Spitfire LF Mk5 b/c (2021)
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire LF Mk5b
- Spitfire LF Mk5b Trop
- Spitfire LF Mk5b Trop (Late French)
- Spitfire LF Mk5c
144 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk5 a/b/c (2021)
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk5a
- Spitfire Mk5b (early)
- Spitfire Mk5b
- Spitfire Mk5c
175 downloads
(0 reviews)0 comments
Submitted
-
Spitfire Mk1 & Mk2 (2021)
By Cliff7600
--------------- Spitfire for CombatAce ---------------
SF2 version 2021
TurboSquid : original 3D model
Snapper21 : source file donated to CA
Wrench : project development origin and inis
Starfighter2 : original Spitfire Mk9 cockpit
Logan4 : additionnal 3D parts and model editing to import into TW sims, textures editing, decals and inis.
Cliff7600 : textures editing, decals and inis, cockpit editing.
Thirdwire : textures and inis.
These are the models made for CombatAce from the original TurboSquid 3D source file.
It is made to be downloaded for free at CombatAce site only, and not to be used in any other way.
The models have been designed for a SF2 / ThirdWire use and nothing else.
Not to be merged with other files sharing the same original 3D model.
- Spitfire Mk1 (early)
- Spitfire Mk1a
- Spitfire Mk1b
- Spitfire Mk2a
- Spitfire Mk2a Long Range
- Spitfire Mk2b
275 downloads
(0 reviews)0 comments
Updated
-
FW-190A8R2
By torno
FW 190A8R2, (similar to the FW190A8 but with more armor), this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 1 historical skin, the new pilot Luftwaffe (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default). It includes all the decals of the previous fw190 created by me.
Hope you enjoy it, more info in the readme file.
Sorry my English is bad
205 downloads
-
FW-190A8
By torno
FW 190A8, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with its corresponding cockpit with 3 historical skin and 2 clean so you can fly with the nation you like, the new luftwaffe pilot (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default).
Hope you enjoy it, more information in the readme file.
Sorry my English is bad
Torno
160 downloads
(1 review)0 comments
Submitted
-
Heinkel HE-111 H
By Veltro2k
Heinkel HE-111-H
The Heinkel He 111 was a German bomber aircraft designed by Siegfried and Walter Günter at Heinkel Flugzeugwerke in 1934. Through development it was described as a "wolf in sheep's clothing". Due to restrictions placed on Germany after the First World War prohibiting bombers, it masqueraded as a civil airliner, although from conception the design was intended to provide the nascent Luftwaffe with a fast medium bomber
Credits:
// aircraft model by Veltro2k
// cockpit by Stary (with edits as He-111 stand-in)
// He-111 destroyed model by Capun
// flight model, painting, decals and data by Charles
THIS MODEL IS ONLY TO BE DISTRIBUTED AS FREEWARE AND IN NO OTHER CIRCUMSTANCE SHALL IT BE USED, EVEN IN PART OF ANYTHING THAT IS PAYWARE. IN ACCORDANCE WITH THE COMBAT ACE MODDERS AGREEMENT
266 downloads
(0 reviews)0 comments
Submitted
-
FW-190A6
By torno
FW 190A6, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with 1 historical skin and a clean one so you can fly with the nation you like, the new pilot of the luftwaffe (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default).
Hope you enjoy it, more info in the readme file.
Sorry my English is bad
TORNO
267 downloads
-
YB-40 Destroyer
By Veltro2k
SF2 WW2 ETO YB-40 Destroyer by Veltro2K
-- Something for the WW2 ETO players --
= For SF2, Full-5 Merged (Reccomended/Preferred) =
This is the release of the YB-40 by Veltro2k, an extensively modified B-17F that was experimentaly used by the 8th AF as an escort placed with regular B-17 formations. The aircraft depicted here were those 12 used by the 92nd Bombardment Group (H), 327th Bomb Squadron based at RAF Alconbury.
All markings are decals, and decal randomization is TRUE. Serial numbers and plane-in-squadron letter are 100% historical and are matched to their proper aircraft.
2 skins are supplies; the only difference is one uses the early 'star-and-ball' (pre-Sept 43). The other uses the 'star-and-bar' (post-Sept 43). Both skins are Olive Drab over Neutral Gray. The aircraft has less than a one year service life, nearly approximating the Real World (tm) usage.
When in-game, you'll see
YB-40 Flying Fortress (v2k)
on the aircraft selection drop-down list.
As always, fairly easy to follow, yet detailed install instructions are included. So, please =READ= them BEFORE installing this mod!!!. Also, give the "Notes" section a read too.
Happy Hunting!
Wrench
Kevin Stein
Credits:
Veltro2k for the aircraft
Kesselbrut for the cockpt
??? for the pilot figures
Me, for stuff
143 downloads
(0 reviews)0 comments
Updated
-
BF109F-4.7z
By russouk2004
Messerschmitt BF109F-4 For Strike Fighters2
Converted from Freeware model from FSX,By Me Russouk2004
I havent the creators name just that its free to modify.
Contents.
Repaints.....
All skins are painted by me,there was template,but I totally redid all panels,rivets etc...apart from some stencils.And some of the base textures.
Versions................
BF109F-2/4 Europe
BF109F-4 Middle East/Scicily
Captured BF109F-4\G of RAF 1944\45
BF109 Cockpit Thanks Starfighter2
BF109F-4
Sounds
Pilots
Destroyed Model(109E)
All Authentic Decals,and some actual aces and their a\c
including...............................
Hans Non Hahn StabI./JG3 Lutsk 1941
Walter Nowotny 3.JG 54 "Grunherz"
Oblt Hubert Mutherich 5/JG54
Felix Sauer 6/JG53 1941
Olt Otto Bohner 6/JG53 "Pikas" 1941
...........................................
Required Files.....................
WW2 Formations.ini which can be found in dowlnoad section.
Guns and sounds if you havent already got them.........................
https://combatace.com/files/file/11846-avhistory-ww2-guns-for-sf2/
Drop Objects folder into your Mod folder and ok to overwrite..(take care to back up first if you have files of similar names)
Damaged Lod goes into a\c main folder.
Sounds Folder into main mod folder,allow overwite \or skip if have the files.
Canopy Key Shift_0 (zero)
Templates to follow.
This is freeware mod and cannot be uploaded to ANY site apart from here at Combatace.com unless permission sought.
Hope you enjoy this mod ,took a few hours of work to get this done. Hope its worth it lol.
Russouk2004(TM) 2021....
361 downloads
-
FW-190A3
By torno
Very short nose FW 190A3, this is my final version of this device that includes all the experimental effects never seen in this simulator, this pack contains the plane with 1 historical skin and a clean one so you can fly with the nation you like, the new Luftwaffe pilot (there are 2 lods, one with glasses and one not, the pilot with glasses is worn by default).
Hope you enjoy it, more info in the readme file.
Sorry my English is bad
===================
FW 190A3 de nariz muy corta, esta es mi versión final de este dispositivo que incluye todos los efectos experimentales nunca vistos en este simulador, este paquete contiene el avión con 1 skin histórico y uno limpio para que puedas volar con la nación que te gusta, el nuevo piloto de la luftwaffe (hay 2 lods, uno con gafas y otro no, el piloto con gafas se lleva por defecto).
Espero que lo disfruten, más información en el archivo léame.
Perdón mi Inglés es malo
Torno.
236 downloads
(2 reviews)0 comments
Updated
-
SF2 A-26N Invader Nightfighter Pack
By Wrench
SF2 A-26N Invader Nightfighter Pack 2/21/2020
-For SF2, Any and All (Full 4/5 Merged Reccomended)
"Quarantine Approved - Essential Mods"
This is a mod of the WW2/KAW era A-26 Invader into a make-shit night fighter/interceptor as used by the French Air Force during the Algerian War of Independence in the late 1950s-early 1960s. This mod was started at the beginning of the year (as you can see from the date above), and got lost in the shuffle, what with all the world wide insanity. I now present it to YOU! Because I can't think of anything else to do with it!!! :)
In the early 1960s, during the aforementioned war, 8 French Air Force A-26B Invader bombers were modified to carry an Air Intercept radar and were used to counter airborne smuggling of arms and supplies to the rebels. They were assinged to ECN I/71.
This model is finished in overall night black, with standard AdA markings. All markings, excepting the French tri-colored rudder, are decals. Decal randomization is TRUE. On the number list ini, you'll see 4 serial marked with the star (*). These have been matched as having been used by ECN 1/71. The other unmarked serials are just 'generic', but those aircraft were used by the AdA (either in Indo-china or Algeria or both).
All other bits are supplied; sounds, pilots, weapons - including a "version" of the SNEB 68 rockets and rocket pod "modified" for air-to-air usage (inis only -- I've tagged them to use the stock 3W Matra pods. And they DO work, with a little practice.)
When in-game, on the aircraft selection drop-down menu, you'll see:
A-26N Invader (NF)
Designating this as a "night fighter" variant.
As is always reccommended, unzip to a temp folder or your desktop to give easy access to the rest of this readme for it's install instructions. Also, as usual, PLEASE give the "Notes" section a look at!!
Good Hunting & Happy Landings!
Wrench
Kevin Stein
"Another Find From The Archives!!!"
196 downloads
Sign in to follow this
Followers
0
-
Download Statistics