Jump to content

Recommended Posts

F-106A Delta Dart in Vietnam (What if)


F-106A in Vietnam (What if)

 

 

 

Background:

 

During the late 60’s there were serious discussions in the USAF about deploying the F-106A to the conflict in Vietnam. Obviously this never eventuated but the possibility lead to project Six Shooter which saw a gun pack and an improved visibility canopy added to the F-106A. So what would the Delta Dart have looked like if it had served in the skies above Vietnam?

 

In 1968 the USAF conducted a Tactical Evaluation to evaluate the effectiveness of existing tactical manoeuvres by USAF and USN combat aircraft against the MiG-21 Fishbed. It was called ‘Have Drill/ Have Ferry.’ The ADC evaluated the F-106 and found its radar capable of acquisition of the MIG and that radar snap-up attack could be used to exploit the MiG-21's lack of fire control. The F-106 could use better acceleration to get beyond MiG-21 speed limits. A direct result of this evaluation was the ADC recommendation to “expedite fitting the internal gun, redesigned canopy, radar warning and ECM equipment into the F-106”.

 

 

 

So based on the above (factual) information I present the F-106A Delta Dart (69) ‘Nam’

 

 

 

To the SF2 F-106A I have added the following:

 

- Permanently mounted M61A1 Gun Pack (Project Six Shooter)

 

- Internal ALQ-100 ECM

 

- Chaff dispensers

 

- APR-25 RHAW (Audio only)

 

- SEA camouflage (Day and Night)

 

- Pilot in tiger stripped flight suit.

 

- I have also applied the MA-1 FCS ECCM upgrade done to 314 F-106 in 1963. The ECCM system allowed the FCS to reject radar returns resulting from chaff dispersal by a target. As part of the upgrade a final modification resulted in increased missile performance. Modifications to the FCS permitted up to 35 percent more deflection of the Falcon missile’s control surfaces. This resulted in a more agile missile at launch, increasing the missile’s ability to react to a maneuvering target.
To portray this in the game I have made changes to the F-106 avionics as well as a specific ECCS AIM-4F missile.

 

 

 

Notes:

 

- The AIM-4G has been changed to have no audible growl (It never had it) and is slaved to the radar. This more accurately portrays the employment of the IR guided Falcons. You will have to use the radar to know when you are locked on and in range. (Just like a F-106 pilot would have had to done in real life).

 

- The weapon bay doors are manually activated, I prefer this as the animation doesn’t work with most missile shots when it’s set on automatic.

 

- There is a specific version of the M61A1 gun for the F-106 as when installed in the F-106 its rate of fire was limited to 4500 rounds per minute.

 

 

 

Credits for the original SF2 F-106A and SEA skin decals:

 

Pasko
Kesselbrut
Column5,
MKSheppard
eburger68
Sundowner
Dave
DaniloE31
Pasko
DaniloE31
Lexx Luthor
76.IAP-Blackbird
Cliff7600

 

 

 

Enjoy!

 

Dan (Dtmdragon)


 

Share this post


Link to post
Share on other sites

I found an error in the "F-106A_63_vietnam.ini" file because Mue's LODViewer was unable to see the textures. The "TextureSet001" and "TextureSet002" have incorrect entries. They do not match the texture directory names or the data in the "TextureSet.ini" file in the directories. Errors pointed out below with corrected entries at the end of the arrows.

 

[TextureSet001]
Directory=SEA <-------------------318SEA
Name=SEA 'What If' <------------318th FIS (SEA)
Nation=USAF
Squadron=318FIS <--------------318th FIS
Specular=0.300000
Glossiness=0.300000
Reflection=0.000000
DecalNumberRandomize=TRUE
DecalNumberBlockSize=20
DecalNumberStart=0
DecalNumberEnd=19
StartDefaultDate=1969
 
[TextureSet002]
Directory=SEAN <------------------5SEAN
Name=SEA night 'What If' <------5th FIS (SEA Night)
Nation=USAF
Squadron=5FIS <-------------------5th FIS
Specular=0.300000
Glossiness=0.300000
Reflection=0.000000
DecalNumberRandomize=TRUE
DecalNumberBlockSize=19
DecalNumberStart=0
DecalNumberEnd=18

Share this post


Link to post
Share on other sites

Each time you run the game all of the aircraft.ini files (unless they have been made read only eg stock aircraft made flyable) are reset to match the data in the texture folders. So simply start the game once before you use the lod viewer and everything will match up fine.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By FANATIC MODDER


      View File F-102A RAZBAM pack v1.0
      YOU NEED RAZBAM F-102A FOR USING THIS PACK
      ----------------------------------------------------------------------------------------
      I had this reworked F-102A in my HD for a long time.
      I have combined Paulopanz 's skinpack in RAZBAM with my own improvements.
      I made a complete rework of the performance specs, engine data, cockpit and avionic mods, new pilots, and ravenclaw weapons with completely new loadouts.
      There is also
      - a Vietnam specific version that can fire Air to Ground AIM-4s, converted by me, and SUU-11 pods.
      - a HAF specific version which is not much more than deleted AIM-26 capability in case X aircraft and a new pilot.
      Credits must really go to
      - RAZBAM
      - Paulopanz
      - Ravenclaw
      Known issues - the SUU-11 pods are not placed correctly. I didn't have time to fix it. I hope someone will fix them.
      EDIT:
      1) About the weapons:
      - For some reason I have Ravenclaw's AIM-4E but not the AIM-4F and AIM-4G. If someone has them, please notify me to include them in the pack.
      - This is the first actual use of Ravenclaw's AIM-26s. I was really surprised to realize that the AIM-26s were actually used only in the updated F-102s. It is weird that the AIM-26s were not used in the F-101Bs and the F-106s
      - I have included the AIM-4F also. I cannot remember exactly, but the AIM-4F was actually carried by the F-102A, I am not sure if it was certified for actual combat use or only for testing (F-102s were used as development planes for the F-106). My final conclusion is that the AIM-4Fs were not issued into operational service with the F-102As simply because they were not enough AIM-4E/F/Gs made, barely enough for the F-106A alone.
      2) I have not included a READ ME file, which I think I will do in the future.
      3) a possible update would fix the SUU-11 issue plus improved avionics, if someone has some suggestions for further improvements please PM me.
       
       
      Submitter FANATIC MODDER Submitted 11/17/2024 Category F-102  
    • By FANATIC MODDER
      YOU NEED RAZBAM F-102A FOR USING THIS PACK
      ----------------------------------------------------------------------------------------
      I had this reworked F-102A in my HD for a long time.
      I have combined Paulopanz 's skinpack in RAZBAM with my own improvements.
      I made a complete rework of the performance specs, engine data, cockpit and avionic mods, new pilots, and ravenclaw weapons with completely new loadouts.
      There is also
      - a Vietnam specific version that can fire Air to Ground AIM-4s, converted by me, and SUU-11 pods.
      - a HAF specific version which is not much more than deleted AIM-26 capability in case X aircraft and a new pilot.
      Credits must really go to
      - RAZBAM
      - Paulopanz
      - Ravenclaw
      Known issues - the SUU-11 pods are not placed correctly. I didn't have time to fix it. I hope someone will fix them.
      EDIT:
      1) About the weapons:
      - For some reason I have Ravenclaw's AIM-4E but not the AIM-4F and AIM-4G. If someone has them, please notify me to include them in the pack.
      - This is the first actual use of Ravenclaw's AIM-26s. I was really surprised to realize that the AIM-26s were actually used only in the updated F-102s. It is weird that the AIM-26s were not used in the F-101Bs and the F-106s
      - I have included the AIM-4F also. I cannot remember exactly, but the AIM-4F was actually carried by the F-102A, I am not sure if it was certified for actual combat use or only for testing (F-102s were used as development planes for the F-106). My final conclusion is that the AIM-4Fs were not issued into operational service with the F-102As simply because they were not enough AIM-4E/F/Gs made, barely enough for the F-106A alone.
      2) I have not included a READ ME file, which I think I will do in the future.
      3) a possible update would fix the SUU-11 issue plus improved avionics, if someone has some suggestions for further improvements please PM me.
       
       
    • By Menrva


      View File Operation Desert Storm: 30th Anniversary Edition
      Welcome To Duty
      Built with the extraordinary expertise and dedication of modders from CombatACE.com, Operation Desert Storm – 30th Anniversary Edition promises to be the most complete total conversion ever made for Strike Fighters 2 by ThirdWire.
      Fly with more than 50 aircraft ranging from Cold War relics to the most advanced platforms. Gain air superiority in the mighty F-15C Eagle or challenge the Coalition with the agile Fulcrum. Support troops with the A-10A Thunderbolt II, bomb strategic targets with the stealthy F-117A Nighthawk, lead airfield denial operations in the iconic Tornado.
      Enjoy a beautifully rendered scenario on a scaled and accurate terrain. Fly over the lakes and rivers of Mesopotamia, the oil-rich fields of Kuwait, the mountains of Iran and Turkey. Take-off from aircraft carriers stationed in the Persian Gulf to watch over Kuwaiti oil rigs. Perform landings and patrols in more than 90 airports and air bases in the Middle East.
      Take part in different campaigns including the Iraqi blitzkrieg on Kuwait and the US-led liberation of the Kuwaiti Emirate. Discover how the Iraqi Army was one of the biggest in the world, through the eyes of American, British, Canadian, French, Italian and Arab pilots. Test your skills and abilities flying for the Iraqi Air Force during all stages of the conflict.
      Thirty years after, Operation Desert Storm still remains the largest air operation of modern warfare to date. Modders and flight sim enthusiasts at CombatACE teamed up to bring you a unique product in the lite flight sim world. Exquisitely detailed aircraft and paint schemes are delivered in a well-researched and thorough order of battle.
      The ODS 30th AE Development team would like to thank CombatACE.com, its admins, moderators and contributors.
      We are sure you will enjoy and appreciate this high-quality freeware product. From the aviation enthusiasts, to the aviation enthusiasts... and for the pilots of tomorrow.
       
      Minimum Requirements
      Required products from ThirdWire:
      Strike Fighters 2, July 2013 patch Strike Fighters 2: Israel, July 2013 patch Strike Fighters 2: North Atlantic, July 2013 patch Full support for:
      Mission Editor DLC Campaign Customizer DLC System specs:
      OS: Windows 7 x86 Processor: Dual Core 2.7 GHz Memory: 4.0 GB RAM Hard Drive: 17.0 GB Free Space Video Card: 1024 MB DirectX 10  
      Sneak Peek
       
      Disclaimer
      CombatACE.com shall at all times retain ownership of the Software as originally downloaded by you and all subsequent downloads of the Software by you. The Software (and the copyright, and other intellectual property rights of whatever nature in the Software, including any modifications made thereto) are and shall remain the property of CombatACE.com and of the respective developers/modders.
      In no event, unless required by applicable law or agreed to in writing, shall CombatACE.com, or any person be liable for any loss, expense or damage, of any type or nature arising out of the use of, or inability to use this installer or program, including, but not limited to, claims, suits or causes of action involving alleged infringement of copyrights, patents, trademarks, trade secrets, or unfair competition.
      The Operation Desert Storm: 30th Anniversary Edition modification does NOT comply with CombatACE's Freeware Licensing. Various contents of this modification are exclusive, as such you are NOT allowed to share, redistribute and/or make use of the mod and/or its contents for other purposes, without the consent of the mod's developers. Contents of the modification are the copyright of their respective authors.
       
      Notes about the installer
      Beware, the mod is available only in the ISO format. You can either mount it on a virtual drive, burn it on a DVD like in the good old days, or unzip it with 7-Zip or equivalent software.
      The installer will automatically detect your installation of the required Strike Fighters 2 games by reading through the registry keys. Game folders that are copied from or manually moved from where they were originally installed are not supported. You need all three aforementioned Strike Fighters 2 games and they must be installed with ThirdWire's original installers, not manually copied from other sources nor moved elsewhere after installation to other folders or drives. If you do not meet any of these requirements, installation cannot proceed and you are on your own. If you install all required games properly, the installation of the mod will proceed correctly as intended. The installer then lets you choose where to install the mod folder; you can even install the mod on a different drive or partition than the one where Strike Fighters 2 is installed. No further user input nor manual edits after installation are ever required; the installer takes care of creating all proper links to your desired path for the mod folder. After installation is over, simply run the mod by using the created Desktop and/or Start Menu links.
      If you have a previous version of the mod installed, please use the uninstaller to remove it completely. Clean installation is mandatory. You might want to make a backup of the Controls folder, so that you can easily restore your controller settings afterwards.
       
      Suggestions on common issues
      Make sure that you are using your dedicated GPU. By default, Strike Fighters 2 usually selects the integrated GPU you may have on your CPU, which is much weaker in terms of VRAM. In case you have frequent crashes or black/missing textures, I highly suggest you download and install the DXVK graphics wrapper (x86 DLLs) into your Strike Fighters 2 game folder: https://github.com/doitsujin/dxvk. You need a Vulkan-compatible GPU. The wrapper can greatly improve the experience with the mod. With DXVK I can play the mod on a mere Intel UHD 710, whereas without it the mod would always crash to desktop. Go to Sound and set Sound Channels to 32. We got reports that 16 is not enough and will cause crashes on some systems, due to the higher quality sounds included within the mod. The mod is pretty heavy for the game engine despite huge optimizations. Strike Fighters 2's engine is 32bit only and apparently does not manage VRAM properly; consecutive campaign missions might show black/missing textures on objects or cause crashes to desktop because the game does not release the occupied VRAM from the previous mission you played, thus the more missions are loaded consecutively, the more easily you may run out of memory. Set Ground Objects to Medium or Low, Horizon Distance to Near, and Shadows to Medium or Low. These are the most troubling settings. Avoid Unlimited settings as much as possible. If the mod used to work and suddenly crashes to desktop, updating or reinstalling video drivers should help. Make sure that DirectX June 2010 Redistributables are also installed, they are included inside the ISO disk image of the mod. Inside the mod folder, you'll find some extra text files. "(Coalition Order of Battle)" should be of your interest; the mod's terrain covers the entirety of Iraq, at the cost of not having all of Saudi Arabia; this means that a number of important units are based on airbases that are beyond the in-game playable area. With those units you always spawn near the target area, you'll never get to start from a runway nor to land on the assigned runway beyond the invisible wall. You have an entire list of the affected units in the aforementioned text file. By pressing ALT+N, the plane returns to base automatically. The mod is fully compatible with the Campaign Customizer and Mission Editor DLCs by ThirdWire. The Campaign Customizer might be an alternative way to experience those off map units I mentioned previously, since it assigns you to a random airbase of the in-game flyable area. Escort missions are often broken, this is not an issue of the mod, but a bug of the stock game; sometimes the AI flight you escort does not engage its target and keeps flying in a straight line instead of following waypoints, thus the trigger for mission success will never happen. Abandon the mission or retry it if the issue happens, sometimes it works. Pray for ThirdWire AKA Tsuyoshi Kawahito to work on a 64bit version of Strike Fighters 2, maybe even with support for DirectX 12. With that done, any out of memory issues should become an old memory. Submitter Menrva Submitted 01/16/2021 Category User Made Campaigns  
    • By Menrva
      Welcome To Duty
      Built with the extraordinary expertise and dedication of modders from CombatACE.com, Operation Desert Storm – 30th Anniversary Edition promises to be the most complete total conversion ever made for Strike Fighters 2 by ThirdWire.
      Fly with more than 50 aircraft ranging from Cold War relics to the most advanced platforms. Gain air superiority in the mighty F-15C Eagle or challenge the Coalition with the agile Fulcrum. Support troops with the A-10A Thunderbolt II, bomb strategic targets with the stealthy F-117A Nighthawk, lead airfield denial operations in the iconic Tornado.
      Enjoy a beautifully rendered scenario on a scaled and accurate terrain. Fly over the lakes and rivers of Mesopotamia, the oil-rich fields of Kuwait, the mountains of Iran and Turkey. Take-off from aircraft carriers stationed in the Persian Gulf to watch over Kuwaiti oil rigs. Perform landings and patrols in more than 90 airports and air bases in the Middle East.
      Take part in different campaigns including the Iraqi blitzkrieg on Kuwait and the US-led liberation of the Kuwaiti Emirate. Discover how the Iraqi Army was one of the biggest in the world, through the eyes of American, British, Canadian, French, Italian and Arab pilots. Test your skills and abilities flying for the Iraqi Air Force during all stages of the conflict.
      Thirty years after, Operation Desert Storm still remains the largest air operation of modern warfare to date. Modders and flight sim enthusiasts at CombatACE teamed up to bring you a unique product in the lite flight sim world. Exquisitely detailed aircraft and paint schemes are delivered in a well-researched and thorough order of battle.
      The ODS 30th AE Development team would like to thank CombatACE.com, its admins, moderators and contributors.
      We are sure you will enjoy and appreciate this high-quality freeware product. From the aviation enthusiasts, to the aviation enthusiasts... and for the pilots of tomorrow.
       
      Minimum Requirements
      Required products from ThirdWire:
      Strike Fighters 2, July 2013 patch Strike Fighters 2: Israel, July 2013 patch Strike Fighters 2: North Atlantic, July 2013 patch Full support for:
      Mission Editor DLC Campaign Customizer DLC System specs:
      OS: Windows 7 x86 Processor: Dual Core 2.7 GHz Memory: 4.0 GB RAM Hard Drive: 17.0 GB Free Space Video Card: 1024 MB DirectX 10  
      Sneak Peek
       
      Disclaimer
      CombatACE.com shall at all times retain ownership of the Software as originally downloaded by you and all subsequent downloads of the Software by you. The Software (and the copyright, and other intellectual property rights of whatever nature in the Software, including any modifications made thereto) are and shall remain the property of CombatACE.com and of the respective developers/modders.
      In no event, unless required by applicable law or agreed to in writing, shall CombatACE.com, or any person be liable for any loss, expense or damage, of any type or nature arising out of the use of, or inability to use this installer or program, including, but not limited to, claims, suits or causes of action involving alleged infringement of copyrights, patents, trademarks, trade secrets, or unfair competition.
      The Operation Desert Storm: 30th Anniversary Edition modification does NOT comply with CombatACE's Freeware Licensing. Various contents of this modification are exclusive, as such you are NOT allowed to share, redistribute and/or make use of the mod and/or its contents for other purposes, without the consent of the mod's developers. Contents of the modification are the copyright of their respective authors.
       
      Notes about the installer
      Beware, the mod is available only in the ISO format. You can either mount it on a virtual drive, burn it on a DVD like in the good old days, or unzip it with 7-Zip or equivalent software.
      The installer will automatically detect your installation of the required Strike Fighters 2 games by reading through the registry keys. Game folders that are copied from or manually moved from where they were originally installed are not supported. You need all three aforementioned Strike Fighters 2 games and they must be installed with ThirdWire's original installers, not manually copied from other sources nor moved elsewhere after installation to other folders or drives. If you do not meet any of these requirements, installation cannot proceed and you are on your own. If you install all required games properly, the installation of the mod will proceed correctly as intended. The installer then lets you choose where to install the mod folder; you can even install the mod on a different drive or partition than the one where Strike Fighters 2 is installed. No further user input nor manual edits after installation are ever required; the installer takes care of creating all proper links to your desired path for the mod folder. After installation is over, simply run the mod by using the created Desktop and/or Start Menu links.
      If you have a previous version of the mod installed, please use the uninstaller to remove it completely. Clean installation is mandatory. You might want to make a backup of the Controls folder, so that you can easily restore your controller settings afterwards.
       
      Suggestions on common issues
      Make sure that you are using your dedicated GPU. By default, Strike Fighters 2 usually selects the integrated GPU you may have on your CPU, which is much weaker in terms of VRAM. In case you have frequent crashes or black/missing textures, I highly suggest you download and install the DXVK graphics wrapper (x86 DLLs) into your Strike Fighters 2 game folder: https://github.com/doitsujin/dxvk. You need a Vulkan-compatible GPU. The wrapper can greatly improve the experience with the mod. With DXVK I can play the mod on a mere Intel UHD 710, whereas without it the mod would always crash to desktop. Go to Sound and set Sound Channels to 32. We got reports that 16 is not enough and will cause crashes on some systems, due to the higher quality sounds included within the mod. The mod is pretty heavy for the game engine despite huge optimizations. Strike Fighters 2's engine is 32bit only and apparently does not manage VRAM properly; consecutive campaign missions might show black/missing textures on objects or cause crashes to desktop because the game does not release the occupied VRAM from the previous mission you played, thus the more missions are loaded consecutively, the more easily you may run out of memory. Set Ground Objects to Medium or Low, Horizon Distance to Near, and Shadows to Medium or Low. These are the most troubling settings. Avoid Unlimited settings as much as possible. If the mod used to work and suddenly crashes to desktop, updating or reinstalling video drivers should help. Make sure that DirectX June 2010 Redistributables are also installed, they are included inside the ISO disk image of the mod. Inside the mod folder, you'll find some extra text files. "(Coalition Order of Battle)" should be of your interest; the mod's terrain covers the entirety of Iraq, at the cost of not having all of Saudi Arabia; this means that a number of important units are based on airbases that are beyond the in-game playable area. With those units you always spawn near the target area, you'll never get to start from a runway nor to land on the assigned runway beyond the invisible wall. You have an entire list of the affected units in the aforementioned text file. By pressing ALT+N, the plane returns to base automatically. The mod is fully compatible with the Campaign Customizer and Mission Editor DLCs by ThirdWire. The Campaign Customizer might be an alternative way to experience those off map units I mentioned previously, since it assigns you to a random airbase of the in-game flyable area. Escort missions are often broken, this is not an issue of the mod, but a bug of the stock game; sometimes the AI flight you escort does not engage its target and keeps flying in a straight line instead of following waypoints, thus the trigger for mission success will never happen. Abandon the mission or retry it if the issue happens, sometimes it works. Pray for ThirdWire AKA Tsuyoshi Kawahito to work on a 64bit version of Strike Fighters 2, maybe even with support for DirectX 12. With that done, any out of memory issues should become an old memory.
×

Important Information

By using this site, you agree to our Terms of Use, Privacy Policy, and We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue..