Strike Fighters 1 Series by Thirdwire

This is a Kestrel skin.. Fictional Israel Air Force version.
 
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
Cheers
HrntFixr

Revised WOV F-4E-35 textures 11-07
 
 
Found a couple of problem areas after releasing the first texture sets. These are fixed, plus the panel lines and stenciled markings are sharpened up a bit. Also darkened up the rear fuselage bare metal areas to match photos better and changed the wing fold details and tweaked a few other minor details. As before, these base textures are made to go with my USAF F-4 decals so no national markings are on the base art. Still at 1024 pixel resolution for modest computer systems.These textures are for the short gun F-4E-35.
 
Mike Druzolowski

Revised WOV F-4C/D textures 11-07
 
Found a couple of problem areas after releasing the first texture sets. These are fixed, plus the panel lines and stenciled markings are sharpened up a bit. Also darkened up the rear fuselage bare metal areas to match photos better and changed the wing fold details and tweaked a few other minor details. As before, these base textures are made to go with my USAF F-4 decals so no national markings are on the base art. Still at 1024 pixel resolution for modest computer systems.
 
Mike Druzolowski

this skin represents a SU-22M4 of MFG28.
read the readme for more infos.

Revised WOV USAF F-4 tailcodes 11-07
 
This is a small update to my USAF SE Asia Phantom II tailcode decals. It adds fin tip colors to the RHAW antenna housing on the vertical stab, and wingtip tape light decals. Also included is a new nose landing gear door decal with the last three digits of the serial number - which is repeated on the inside of the nose gear side fairing door (for PACAF F-4D serials only). Although not on every airplane, this was very common on many F-4Ds in Southeast Asia.
 
Several entries in the squadronlist.ini were extraneous - this has been fixed. Drop all included decal .TGA files into your objects-decals folder, over-writing all older files. Place this squadronlist.ini into the Pilotdata folder. (No new entrys were added, only extra entries deleted. Oh, also I missed the 13th TFS, 432nd TRW at Udorn with "UD" tailcodes in 1973 which was accidentally "WP" on the decal. All original entries remain the same, only now they will call up correct decals).
 
Mike Druzolowski

MiG-19 Farmer 1024 Skin template:
 
These are new templates, based off and resized from the original little itty bity ones as originally issued by 3rd Wire. I call these "semi-HiRez, as they are now resized to 1024x1024
This set is designed to allow you to create new skins, either natural metal or camoflague types.
 
I've redrawn, as best I can, all the panel, rivet lines, inspection plates, etc. Some of the rivet placement is a 'best guess', as the original size of the bmp was ONLY 256x256, and are badly blurred.
 
The base skin color is a 10-15% gray, which when adjusted for in the textureset ini, will look like semi-polished natural metal.
 
Please see the enclosed readme for more information, and other interesting tid-bits.
 
Happy Skinning!
Wrench
kevin stein

MiG-19 Farmer New 1024x1024 Natural Metal Skin
 
This is simply a re-do of the stock 3rd Wire MiG-19S Farmer-C skin into a larger, higher resolution unit. This is a simple replacement for you stock, itty-bitty ones. I call them 'semi-hirez', as they're only the 1024, which is a pretty good size for 98.6% of all the machines out there.
 
All the panel and rivet lines have been redrawn, and it's painted a generic 'natural metal' color.
 
Please see the enclosed readme for simple install instructions (nothing complicated this time!!! )
 
Enjoy!
Wrench
kevin stein

USMC Harrier Style camo for the ZA-9 Kestrel by Julhelm.
 
Thanks to Julhelm for the Kestrel, an awesome little bird to fly.
 
---------------
Changes in v1.1
---------------
 
- Connecting Lines Tidied up
- Dirt Tidied up
- Redone Tail Lines and Highlights on the left side
- Adjusted Markings
- Adjusted Textureset parameters
- Added Patch
- Added more Numbers - Total 16
- HUDGlass.tga is now clear, not green

This is a fictional F-5E skin of the Israeli Air Force.
Version 2, since the first one just looks bad now.
 
 
Original model by The Mirage Factory. Thanks and credit to them, great aircraft!
Special thanks to BOZ for his templates!.... find them here at CA.
 
 
Cheers
Hrntfixr

This is a Kestrel skin.. Fictional Tuskegee Airman version by request.
Here ya go Turtlehawk!
 
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
 
Cheers
HrntFixr

Here's a close copy of Flanker 562's Ukrainian Su-27 Splinter scheme thanks to him for giving me permission to post. As with my other schemes I only take credit for the work i did on the skin , Decals etc came with the original F15C post.
Use this skin in any way you like ( some new decals might be nice for instance if you know how ) , just give me credit please unless you change it beyond all recognition :)
As always please read the read-me before use and note that I have included alternative Tail/Nose section with Red Star and Tactical Fighter Number.
Have fun and i hope you enjoy.

VMA-231 "Ace of Spades" skin for Julhelm's Kestrel. Modern Style three tone grey.

This is a Kestrel skin.. Fictional USAF Mass ANG version.
Requested skin for JA 37 Viggen.
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
Cheers
HrntFixr

Readme for the P-270 for SFP1/WOV/WOE
 
Thanks to the following folks:
 
TK - For the ThirdWire series of sims.
Bunyap and Wpnssgt - For the original Weapons Pack.
Mustang - For the great video tutorials.
To my fellow Combatace moderators - For helping me beta test and work out bugs.
Any errors or mistakes are entirely mine.
 
What you will need first:
 
Bunyap's Weapon's Pack - http://forum.combatace.com/index.php?autom...p;showfile=2672
 
Thirdwire Weapons Editor - http://www.thirdwire.com/downloads_tools.htm
 
Copy of SFP1/WOE/WOV patched to the latest standard (as of 22 Oct 07)
 
Notes and limitations:
 
The Moskit is a LARGE air to ground missile, but is also a ground to ground missile that can be fired off ships. It is known in NATO as the SS-N-22 Sunburn and is used to attack ships. This version is the non-nuclear warhead.
 
The air to ground version is meant to be mounted on the advanced variants of the Flanker family. For that reason I built 2 versions, one with an inbuilt plyon, one without a pylon to be used later in other applications (ships, advanced Flanker releases, etc). It also means that the missile is currently classfied as a EOGR, not a ASM.
 
Because the current Flanker (Su-27) does not have a large centerline pylon, or Anti-Ship capabilities, I added the following to the Su-27_data.ini.
 
Under the [Fuselage] entry I added:
 
SystemName[029]=LargeCenterlineStation
 
Under the // Weapon Stations I added:
 
[LargeCenterlineStation]
SystemType=WEAPON_STATION
StationID=11
StationGroupID=4
StationType=EXTERNAL
AttachmentPosition=0.0,-2.7,0.1
AttachmentAngles=0.0,0.0,0.0
EjectVelocity=0.0,0.0,-1.0
LoadLimit=4200
AllowedWeaponClass=EOGR
AttachmentType=WP,SOVIET
ModelNodeName=
PylonMass=86.18
PylonDragArea=0.02
 
This is sort of a 'Band-aid' to allow you to use the Moskit to attack ground targets, however, you will need to add an Anti-Ship loadout to the loadout.ini AND add the ANTI_SHIP mission to the data.ini to be able to be targeted against ships.
 
You can also make the nuclear version of the missile by changing the warhead yield and effects type, or make new weapondata.ini entries that use the current missile models.
 
This is FREEWARE only, NO money is allowed to be made on the contents of these files, in whole or in part.
 
Feel free to redistribute, as long as the original authors are given appropriate credit.
 
Questions? Contact me at Combatace.
 
FastCargo
25 Nov 07

ZA-9 Kestrel, VMFA-58 'Wildcards' skin for SF, WoV & WoE:
 
Simple skin, using the decals from some other Wildcards mods (as everyone knows just how much I =hate= wasting good decals....), and the template provided. It is based off the original gray skin, so all credit goes to Julhelm.
 
It represents USMC squadron VMFA-58 "The Wildcards", had they truely existed, and were flying this aircraft. What, you all didn't think I was gonna jump on this bandwagon????? What better fictional unit to have flying a fictional aircraft, than the "Wildcards"!!!
 
There are personalized nameplate decals for the characters, plus a few other I always throw in for good measure, and just plain fun!! (there are 2 screenies in the zip...one shows a close up of the commander's A/C - he uses a different patch)
 
Simple, easy to follow instructions are in the enclosed readme...it's just a simple skin and decal pak, so it's really hard to mess this up....
 
Enjoy!
Wrench
kevin stein

This is a Kestrel skin.. Fictional USAF attack version.
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
 
Cheers
HrntFixr

Combination of the stock F-4J cockpit and higher resolution textures that provides a decent F-4B cockpit.

Adaptation of my F-4B Hi-Res Cockpit to represent an F-4J.
 
The stock F-4J cockpit is a mix bewteen the F-4B and early F-4J cockpits.
In reality, the two are very similar except for the radar scope and radar warning receiver.
So this release is really my F-4B cockpit with those two changes.
Unfortunately, the 3d model uses the F-4B radar scope shape.
The F-4J radar scope texture does not wrap onto the F-4B shape very well in some places.

This is more than just a high resolution repaint of the stock F-4C cockpit. The instruments have been carefully calibrated. In the case of the Engine RPM and Temperature gauges, new functionality has been added. The smaller 0 thru 9 gauges are now fully functional.

Continuing the series, this F-4D high resolution cockpit looks as good or better than my previous F-4B/C/J efforts. I could not get a good photo of the radar scope, so I did the best I could with what I had.

After quite a few delays, I am finally releasing my next Hi-res F-4 cockpit:
The F-4E. This one required more work than I expected. There were actually fewer photos of the F-4E panels available on the internet than the F-4B/C/D/J variants despite the F-4E being the most numerous production model.

Streak Eagle's High Resolution F-4B Cockpit Version 2: Added Emer Brake label to handle, made secondary needles for Engine %RPM functional, and altered Radio Call to be black instead of chipped paint. Combination of the stock F-4J cockpit and high-resolution textures to make a nice F-4B cockpit.

This is a Kestrel skin.. Fictional NAVY version of the Jolly Rogers.
 
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
 
Cheers
HrntFixr

This is a Ketrel skin.. Fictional USAF version of the NY ANG.
 
 
Thanks and credit to Julhelm for the model, templates and bringing a great fictional aircraft to the community.
 
 
You must ask permission to modify or use this skin for any project. This skin
CANNOT be used in any payware.
 
 
Cheers
HrntFixr

This is alternative model of AIM-120 Amaam semiradar missile for Strike Fighters. All instructions and usable files for modelers are included inside.
 
AN Incorrect placement of middle stabilizers is now OK ! Update you last version, sorry.
 
Report me any known errors !