Leaderboard

Hello, and thank you for downloading my work. https://gkabs.net https://gulfknights.net What's included: Bayraktar TB2 is a Turkish medium-altitude long-endurance (MALE) unmanned combat aerial vehicle (UCAV) model. this come with 6 Texutes (Azerbaijan, Morocco, Poland, Qatar, Turkey and Ukraine) All my files should include the Strike Fighters 2 Series game file, (.old) and the texture required. (tested and work only for SF2) Installation: Copy files to their proper folder If you need any further help, please read the Knowledge Base at: https://combatace.com/forums/forum/268-thirdwire-strike-fighters-2-series-knowledge-base/ Version 1.0.3 Improve the FM and removed VTOl from the hud display. Thanks to Coupi. Version 1.0.2 Updated the data file thanks to yakarov79's help in showing me how to fix it. now the camera and the laser are working searching around for targets. 1.0.0 LICENSE: You are allowed to, use this model and everything included with it for personal non-profit use for Strike Fighters 1 and 2. For use outside of this scope, you need to contact me for permission. gkabs@gkabs.net Credit goes to the following: Third Wire for making this outstanding game. Coupi for his early trying to work on the model and testing and for making the promo screenshots compufat for working on all textures for the TB2 (except the Turkish one) and for making the decals and testing the model. guuruu for making the all FM files, also for making the UMTAS Missile and Rail, and for reworking the UVW for the two missiles MAM-C and L. Thank you so much for all the time spent making this model come to life. Zurawski for using his outstanding MQ-10A Kodiak cockpit Credit goes to https://www.textures.com as I use a lot of their photos to create the skins. Google for some photos and information. And finally not to forget the wonderful site of https://combatace.com and all the nice members and their dedicated support for this game. Software used: 3d Max 2009 UVLayout v2 Pro Substance Painter Adobe Photoshop If you need any assistance, please contact me at gkabs@gkabs.net

Welcome To Duty Built with the extraordinary expertise and dedication of modders from CombatACE.com, Operation Desert Storm – 30th Anniversary Edition promises to be the most complete total conversion ever made for Strike Fighters 2 by ThirdWire. Fly with more than 50 aircraft ranging from Cold War relics to the most advanced platforms. Gain air superiority in the mighty F-15C Eagle or challenge the Coalition with the agile Fulcrum. Support troops with the A-10A Thunderbolt II, bomb strategic targets with the stealthy F-117A Nighthawk, lead airfield denial operations in the iconic Tornado. Enjoy a beautifully rendered scenario on a scaled and accurate terrain. Fly over the lakes and rivers of Mesopotamia, the oil-rich fields of Kuwait, the mountains of Iran and Turkey. Take-off from aircraft carriers stationed in the Persian Gulf to watch over Kuwaiti oil rigs. Perform landings and patrols in more than 90 airports and air bases in the Middle East. Take part in different campaigns including the Iraqi blitzkrieg on Kuwait and the US-led liberation of the Kuwaiti Emirate. Discover how the Iraqi Army was one of the biggest in the world, through the eyes of American, British, Canadian, French, Italian and Arab pilots. Test your skills and abilities flying for the Iraqi Air Force during all stages of the conflict. Thirty years after, Operation Desert Storm still remains the largest air operation of modern warfare to date. Modders and flight sim enthusiasts at CombatACE teamed up to bring you a unique product in the lite flight sim world. Exquisitely detailed aircraft and paint schemes are delivered in a well-researched and thorough order of battle. The ODS 30th AE Development team would like to thank CombatACE.com, its admins, moderators and contributors. We are sure you will enjoy and appreciate this high-quality freeware product. From the aviation enthusiasts, to the aviation enthusiasts... and for the pilots of tomorrow. Minimum Requirements Required products from ThirdWire: Strike Fighters 2, July 2013 patch Strike Fighters 2: Israel, July 2013 patch Strike Fighters 2: North Atlantic, July 2013 patch Full support for: Mission Editor DLC Campaign Customizer DLC System specs: OS: Windows 7 x86 Processor: Dual Core 2.7 GHz Memory: 4.0 GB RAM Hard Drive: 17.0 GB Free Space Video Card: 1024 MB DirectX 10 Sneak Peek Disclaimer CombatACE.com shall at all times retain ownership of the Software as originally downloaded by you and all subsequent downloads of the Software by you. The Software (and the copyright, and other intellectual property rights of whatever nature in the Software, including any modifications made thereto) are and shall remain the property of CombatACE.com and of the respective developers/modders. In no event, unless required by applicable law or agreed to in writing, shall CombatACE.com, or any person be liable for any loss, expense or damage, of any type or nature arising out of the use of, or inability to use this installer or program, including, but not limited to, claims, suits or causes of action involving alleged infringement of copyrights, patents, trademarks, trade secrets, or unfair competition. The Operation Desert Storm: 30th Anniversary Edition modification does NOT comply with CombatACE's Freeware Licensing. Various contents of this modification are exclusive, as such you are NOT allowed to share, redistribute and/or make use of the mod and/or its contents for other purposes, without the consent of the mod's developers. Contents of the modification are the copyright of their respective authors. Notes about the installer Beware, the mod is available only in the ISO format. You can either mount it on a virtual drive, burn it on a DVD like in the good old days, or unzip it with 7-Zip or equivalent software. The installer will automatically detect your installation of the required Strike Fighters 2 games by reading through the registry keys. Game folders that are copied from or manually moved from where they were originally installed are not supported. You need all three aforementioned Strike Fighters 2 games and they must be installed with ThirdWire's original installers, not manually copied from other sources nor moved elsewhere after installation to other folders or drives. If you do not meet any of these requirements, installation cannot proceed and you are on your own. If you install all required games properly, the installation of the mod will proceed correctly as intended. The installer then lets you choose where to install the mod folder; you can even install the mod on a different drive or partition than the one where Strike Fighters 2 is installed. No further user input nor manual edits after installation are ever required; the installer takes care of creating all proper links to your desired path for the mod folder. After installation is over, simply run the mod by using the created Desktop and/or Start Menu links. If you have a previous version of the mod installed, please use the uninstaller to remove it completely. Clean installation is mandatory. You might want to make a backup of the Controls folder, so that you can easily restore your controller settings afterwards. Suggestions on common issues Make sure that you are using your dedicated GPU. By default, Strike Fighters 2 usually selects the integrated GPU you may have on your CPU, which is much weaker in terms of VRAM. In case you have frequent crashes or black/missing textures, I highly suggest you download and install the DXVK graphics wrapper (x86 DLLs) into your Strike Fighters 2 game folder: https://github.com/doitsujin/dxvk. You need a Vulkan-compatible GPU. The wrapper can greatly improve the experience with the mod. With DXVK I can play the mod on a mere Intel UHD 710, whereas without it the mod would always crash to desktop. Go to Sound and set Sound Channels to 32. We got reports that 16 is not enough and will cause crashes on some systems, due to the higher quality sounds included within the mod. The mod is pretty heavy for the game engine despite huge optimizations. Strike Fighters 2's engine is 32bit only and apparently does not manage VRAM properly; consecutive campaign missions might show black/missing textures on objects or cause crashes to desktop because the game does not release the occupied VRAM from the previous mission you played, thus the more missions are loaded consecutively, the more easily you may run out of memory. Set Ground Objects to Medium or Low, Horizon Distance to Near, and Shadows to Medium or Low. These are the most troubling settings. Avoid Unlimited settings as much as possible. If the mod used to work and suddenly crashes to desktop, updating or reinstalling video drivers should help. Make sure that DirectX June 2010 Redistributables are also installed, they are included inside the ISO disk image of the mod. Inside the mod folder, you'll find some extra text files. "(Coalition Order of Battle)" should be of your interest; the mod's terrain covers the entirety of Iraq, at the cost of not having all of Saudi Arabia; this means that a number of important units are based on airbases that are beyond the in-game playable area. With those units you always spawn near the target area, you'll never get to start from a runway nor to land on the assigned runway beyond the invisible wall. You have an entire list of the affected units in the aforementioned text file. By pressing ALT+N, the plane returns to base automatically. The mod is fully compatible with the Campaign Customizer and Mission Editor DLCs by ThirdWire. The Campaign Customizer might be an alternative way to experience those off map units I mentioned previously, since it assigns you to a random airbase of the in-game flyable area. Escort missions are often broken, this is not an issue of the mod, but a bug of the stock game; sometimes the AI flight you escort does not engage its target and keeps flying in a straight line instead of following waypoints, thus the trigger for mission success will never happen. Abandon the mission or retry it if the issue happens, sometimes it works. Pray for ThirdWire AKA Tsuyoshi Kawahito to work on a 64bit version of Strike Fighters 2, maybe even with support for DirectX 12. With that done, any out of memory issues should become an old memory.

In the early 1990s, the Italian Air Force (Aeronautica Militare Italiana, or AMI) identified a requirement for a fighter to boost its air defence capabilities pending introduction of the Eurofighter Typhoon, expected around 2000. These fighters were to operate alongside the service's obsolescent F-104ASA Starfighters. The Tornado ADV was selected from, amongst others, the F-16. On 17 November 1993, Italy signed an agreement with the RAF to lease 24 Tornado F3s from the RAF for a period of ten years. First training of AMI pilots began in March 1995 at RAF Coningsby while technicians gained experience at RAF Cottesmore and Coningsby. The first aircraft was accepted on 5 July 1995 and flown to its Italian base the same day. Delivery of the first batch was completed by 1996; these aircraft were deployed at Gioia del Colle in Southern Italy. The second batch was delivered between February and July 1997, these aircraft were of a slightly higher specification. They served with 12° Gruppo 36° Stormo at Gioia del Colle AB from 1995 to 2004 and with 21° Gruppo 53° Stormo at Cameri AB from 1997 to 2001. In 1999 it joined 36° Stormo at Gioia del Colle AB and in 2001 was disbanded. The AMI returned its Tornados to the RAF, with the final aircraft arriving at RAF Saint Athan on 7 December 2004. WHAT'S IN: - 3 new High Rez skins covering all A.M.I. service - All historical group numbers and planes matricole - edited data.ini with taxi dancing fixed with Italy export time - edited userlist.ini with Italy CREDITS: - Bobrock: plane and templates - Menvra: new ODS edition Tornado F.3 taiored to use with - Paulopanz: skins & decals, ini tweakings NOTE: - Ready for Kosovo War duty Enjoy @ paulopanz