sitting_duck

i am on teamspeak now,,,are you able to get on?

cool...i will be on promptly at 1pm ( 1hr 20 mins from now)

will try and get on around 1pm edt,,,,which i beilve is something around 1800ish gmt. will keep my eye out for anyone needing help with either teamspeak, and/or mp will check this thread everyso often for anyone having problems with ts if i do not respond immediatly on teamspeak, give me a few...

lol..hopefully your still following this thread... look,,,if cfs3 is still running bad,,,think you have to admit,,whatever the problem is, its got nothing to do with bhah.... and,,,as the only other variable in this whole thing is your card,,new or not,,,i am really incline to be pointing the finger at either the card,,,the drivers,,or,,(and know you used to have 2 cards in there before, but i have no idea how much power they required) the power supply.... so if it this was me,,,i would definatly put those other cards in there,,,and see what you end up with......you could probably just stick one in there,,that should be enough to see if the game plays better... if you happen to have a bad card (my ati only lasted bout 2 months) the sooner you make the determination, the sooner you will resolve the problem, and as it stands now,,,seems to me whatever problem you have now is gonna crop up again at some point in time in the future.... but,,,,like i said,,if cfs3 is playing bad,,,your problem does not lie with bhah... and,,just as a thought,,,i couldnt find a good pic of the 7800 that showed the power pins....but did see that on the 250 it needs a single 6pin pcie connector. does your power supply have one of those,,or did you adapt a 4 pin connctor to run the card...

green moutain time?

src,,everything is on the sticky in this forum

11:56 here stump,,,ill stay up for one more butt,,and im off to bed

WOW,,,,top notch stuff cj!!

as the gpatch seems to modify dm,,and will cause a mismatch,,,suggetst we wait for vascos thumbs up, or thumbs down on installing..

axe,,,if i rush,,,i can make it by 8 edt...... and,,,just went to check teamspeak,,and outlaw is down for me,,,will check dutch everyso often

hopefully rabu will post his n17 in the clouds screenshot,,,

hey,,,wheres the debriefing??? i wanna see what the commander has to say bad about me this week.....

view the sticky for mp sessions in the mp forum. once the host computer has a game up and running (and i highly suggetst you host a mission, and not a dogfigtht), then the other computers should be able to join either thru the hosts external ip (whatsmyipaddress.com), or the hosts compters internal ip (start>run>cmd>ipconfig) if you have vista,,getting to cmd is different. good misson to start out with is pds trainbusters,,or zepplins over paris...they are both in the downloads sections here. put the xml files in your missions\historical folder note: if the host is going thru a router, you may have to forward the ports. info for ports is in sticky, but as all routers are different, there are not proceedures there. if this is the case, post whatever router you have, and will look it up for you

lol..nope...i was in bed by that time... maybe some time tonight?

that sounds to me like its treating your z axis as a button or key..., and not an axis. so, if you are in chase view,,,watching your plane from your six, and twist to the left and hold,,,you probably see your rudder move a bit,,then go back to center.. dont have vista, but im sure somewhere in whatever vista has for a control panel,,,there is a game controllers icon, and hopefully there will be a test, or calibrate tab somewhere. Or, if you look at the screen shot i put up for the sensitivy and null zones,,there is a calibare button. This takes you to the same place as control panel does. usually there is a gui for your axis, so you can see the little "meter" go up and down as you move the axis back and forth. If you find all this, and the movement on the axis repsonds thru the whole range of motion on the gui, at least you know its not the controller... as far as what you said about the sensitivy and null zone adjustments,,,(ie,,no or little change) if you make radical adjust ments for that axis (ie,,both to the far left), play the game and see how it responds,,and then make radical adjustments the other way (both to the far right), and you see no change in how that throttle responds,,,it would indicate to me you dont have that axis bound to the z axis in the game,,(if that made sense) and,,,just to be sure,,,when you make your settings in the bhah contols section,,your have to save as "mine",,,,but by default,,i would think it would pick up the rudder twist by default just fine.

That was onna the best sessions yet.... maybe it had something to do with the fact that I actually landed with the plane i took off with twice...

ok,,,getting into areas that i dont know tooo much about,,but, does not sound right that off is chewing up that much ram........ when you close that temp file/application (not sure what it is), are you doing that under applications, or under processes?. i have never seen a ~xxxxx.tmp running in my taks manager, that i can remeber. lol,,if i have,,im sure i stopped it right away... would be interested in seeing if anyone else has noticed that type of application in thier task manager... i would run msconfig,,,and see whats in your startup,,, as far as the disk1 disk2 goes,,,seems like you are correct,,,,it works with either. lol..thats throwing me a little, cause i am almost positive way back when, it only worked with disk2...

well..fiqured out how to make the ac planes flyable,,,now all i gotta go is figure out how to get the various skins in there........

while back ago, stump figured out how to make it possible for everyone to fly with custom skins. Other than a couple of test missions he made up, we have not taken advantage of this. as of now, only 2 planes are available for this, the alb_dlll and fokker dvll, but im sure the proceedure he used for these planes could be applied to any others. wanted to know how much interest there was out there for flying sessions using custom skins. it would involve the following steps.. interested pilots would have to find a skin they wanted to use for their plane, and attach it to a post. after much painful attempts,,i have finally found an installer that would let me put all the skins into a package. everyone flying that session would have to d/l the package, and install it. This would mean that everyone gets to see what everyone else is flying. some fun missions using the planes available would have to be made,,,,or,,,,some missions already made up would have to be modified so that they make the skins planes available for selecting.

not sure if this is going to help you... when you open up the controls section in bhah,,,,there are two tabs on the left,,,( i have NEVER seen these,,,guess they blend in with the background too much).... the upper tab is assignments,,,this is the default view,,the lower tab is sensitivity,,,and you can edit how your axis respond to movement,,and you can edit your null zones... could be the null zone for your z axis is set to high,,,(ie,,,allows too much movement before it kicks in) in addition, you might want to look at the last post in this thread...http://www.sim-outhouse.com/sohforums/showthread.php?p=249818

yeah,,get the hat clip for sure,,,, if for some reason you think you want the other clip,,the one with the 3 leds,,,ive got one here someone sent to me,,,its yours if you want it. there is no way in hell ill ever wear it,,,too big,,and another cord attached to my head would put me over the edge.. post office did manage to crack a piece,,,but its nothing that cant be fixed with some super glue

sounds great... let me know what day you think it will be, so i can try and clear the day/night...

just when you think you have heard everything huh.... cnt+q, and i belive cntl+shift+q supposedly kill the game completely,,,,but should not be used if you are running campaign, as you loose your claims if any are made..... not sure how you exiting the game, and have no idea why it says it is still running,,,,but maybe try exiting this way,,see if it resolves the problem.....

ive always recommened these for slower computers....http://forum.combatace.com/index.php?showtopic=44430&hl= but dont consider yours a slow computer by any means... if you do try them, the disable write only index and write only vertex buffers for ati still applies... and,,,while your in overides...disable sound,,,and see if that improve anything,,,, and make sure your resolution in cfs3configs is set as high as your monitor will take but that system should play bhah fine,,,

thats odd,,,you should not have gotten that far with disk one in there...... i took my disk out,,,and started the game,,,as soon as i heard the "contack...clear",,i got a message telling me the disk was missing,,put it in and restart the application...and this is before the initialising screen come on. i know ive asked this before,,,when you uninstalled,,did you uninstall everything...cfs3 and bhah, and start all over again? seeing as how you said your cfs3 play sluggish,,,maybe thats where the problem is. know youve done this several times,,but if you have been installing bhah over the same cfs3 install, i would consider uninstalliing everything, cfs3 and bhah ,(and dont forget about the other folders for both cfs3 and bhah) I would not intall bhah untill cfs3 is running fine...if you have a problem with cfs3, good chance you might have a problem with bhah....