Search the Community
Showing results for tags 'tmf'.
Found 12 results
-
Can you fix speed and fuel on the TMF Tomcat?
JamesWilson posted a topic in Thirdwire: Strike Fighters 2 Series - General Discussion
Hi, after seeing the TMF F-14 has wrong and inaccurate speed and fuel indicators, i found out the default Third Wire F-14 has working and accurate ones, but i dont wanna use it cause the TMF Tomcat is better and the cockpit too more realistic too, so can you switch the speed and fuel indicators on the TMF F-14 with the default Third Wire F-14? And for fuel too? Do you need to 3D model and/or do something else other than edit some text files? And is it or it's not possible to do? Down here are 2 pictures from the correct cockpit in the default Third Wire F-14: And 2 from the TMF F-14 (the inaccurate one): Thanks for helping. -
TMF F-14 Speed and Fuel Indicators Wrong?
JamesWilson posted a topic in Thirdwire: Strike Fighters 2 Series - General Discussion
Hi everyone, I just noticed that the speed indicator in the F-14 Tomcat by TMF (TheMirageFactory) only shows up to 800 kts, and the Mach indicator does not move, not letting you know the speed of the aircraft if you have your HUD turned off. As you can see down here, i'm at Mach 2.23, but the indicator only shows 800 kts and doesn't go above. Obviously it adapts to my altitude, so if i'm higher, then the IAS is lower, but still should move, making it impossible flying at high speed without HUD turned on as i have it down here: Another issue, maybe even worse than the previous one, is that the fuel indicator shows wrong numbers, or as i may think, it shows "a number less". For example: if i have 20000 pounds of fuel left, it should show 20000, but it shows 02000. This is a theory on how it works, not confirmed, and i'm gonna explain you why i think it is like that: I hardly think i truly have 2000 pounds of fuel left, cause i choose Fuel 100% and tried climbing and flying for a long time with full afterburner, and the numbers slowly started going down, even reached the point of burning the engine at Mach 2.30and the fuel wasn't gone yet, it showed i had like 00700 left, so i presume it's 20000 in reality, otherwise i would have been out of fuel in no time, since it's a quantity even under the bingo quantity, but i flew for minutes and minutes in full afterburner, and at 8x speed, so. Speaking of Bingo, there's no bingo indicator. Here's a picture of the fuel indicator: I tried the default F-14 cockpit, and even if that one shows correctly both speed and fuel indicators and even if it's a great cockpit, i personally like more and find more realistic and immersive the TMF one. In the end, since these two indicators are crucial, especially for flying without HUD, and the fuel indicator especially, since there's no way to know how much fuel you have left even with HUD turned on other than the cockpit indicator. So, what i'm asking is: Is there a way to fix these? A mod that remakes the indicators? Or another cockpit that is not the default one that i can use to swap this one? Thanks in advance for helping me. -
Clemenceau-class Aircraft Carrier (TMF)
KJakker posted a topic in Thirdwire: Strike Fighters 2 Series - File Announcements
View File Clemenceau-class Aircraft Carrier (TMF) This pack has The Mirage Factory's Clemenceau class aircraft carrier by Marcfighters with updated data files for use in SF2:NA installs by KJakker. /------------------------------------------------------------------ There are two data file variants name Alt1 and Alt2. Alt2 is set by default. The "Alt1" variant of the data files uses the gun included in the original SF1 mod set up for SF2 file structure. The "Alt2" version is set to use an alternate gun made with data from sources avalible to me. The both Guns have been included. This file has been tested in SF2:NA. Note that as this model has all 8 100mm gun mounts. As such the operational dates for the class in the Data and Names files are set to run from their Commissioning dates to the time of the classes mid to late 1980's air defense refits. If Anyone has more precice info on when these refits started and finished please let me know. /------------------------------------------------------------------ Insallation. Backup the folders in your mods directory if you should happen to have the original. Place the contents of the "To Mods Folder" in the corresponding folders in your mods directory. You should not have any conflicts. If there are any they are most likly sound files. If you have a conflict just overwrite as you should be backed up. /------------------------------------------------------------------ By Marcfighters and/or The Mirage Factory. <-----LOD Files-----> clem.LOD clem_desk.LOD clem-001.LOD clem-002.LOD clem-003.LOD clem.OUT <-----Skin Files-----> Clemenceau.bmp Clemenceau2.bmp flag.bmp Grade.tga gray.bmp clem.SHD <-----Guns-----> 100MM_ACAS By KJakker <-----INI Files-----> Clem-65.ini Clem-65_Alt1_DATA.INI Clem-65_Alt2_DATA.INI Clem-65_NAMES.ini <-----Guns-----> 100MM_L55_M1964_C 100MM_L55_M1964_TF <-----Skin File Edited-----> In Foch directory. Clemenceau.bmp By ThirdWire. CV63_CATAPULT1.BMP CV63_CATAPULT2.BMP Source uncertain. <-----Sound Files-----> Impact4.WAV ShellWaterHit.wav SmallExplosion.wav TankGun.wav /------------------------------------------------------------------ Submitter KJakker Submitted 03/03/2019 Category Aircraft Carriers- 4 replies
-
- 3
-
-
- aircraft carrier
- cv
- (and 3 more)
-
Version 1.1.0
686 downloads
This pack has The Mirage Factory's Clemenceau class aircraft carrier by Marcfighters with updated data files for use in SF2:NA installs by KJakker. /------------------------------------------------------------------ There are two data file variants name Alt1 and Alt2. Alt2 is set by default. The "Alt1" variant of the data files uses the gun included in the original SF1 mod set up for SF2 file structure. The "Alt2" version is set to use an alternate gun made with data from sources avalible to me. The both Guns have been included. This file has been tested in SF2:NA. Note that as this model has all 8 100mm gun mounts. As such the operational dates for the class in the Data and Names files are set to run from their Commissioning dates to the time of the classes mid to late 1980's air defense refits. If Anyone has more precice info on when these refits started and finished please let me know. /------------------------------------------------------------------ Insallation. Backup the folders in your mods directory if you should happen to have the original. Place the contents of the "To Mods Folder" in the corresponding folders in your mods directory. You should not have any conflicts. If there are any they are most likly sound files. If you have a conflict just overwrite as you should be backed up. /------------------------------------------------------------------ By Marcfighters and/or The Mirage Factory. <-----LOD Files-----> clem.LOD clem_desk.LOD clem-001.LOD clem-002.LOD clem-003.LOD clem.OUT <-----Skin Files-----> Clemenceau.bmp Clemenceau2.bmp flag.bmp Grade.tga gray.bmp clem.SHD <-----Guns-----> 100MM_ACAS By KJakker <-----INI Files-----> Clem-65.ini Clem-65_Alt1_DATA.INI Clem-65_Alt2_DATA.INI Clem-65_NAMES.ini <-----Guns-----> 100MM_L55_M1964_C 100MM_L55_M1964_TF <-----Skin File Edited-----> In Foch directory. Clemenceau.bmp By ThirdWire. CV63_CATAPULT1.BMP CV63_CATAPULT2.BMP Source uncertain. <-----Sound Files-----> Impact4.WAV ShellWaterHit.wav SmallExplosion.wav TankGun.wav /------------------------------------------------------------------ -
F/A-18A made by TMF (TheMirageFactory)
Gepard posted a topic in Thirdwire: Strike Fighters 1 Series - File Announcements
View File F/A-18A made by TMF (TheMirageFactory) This is the old and original F/A-18A Hornet made by TMF. The original host place is gone. So i upload the file for all of us, who still love it to fly the first generation Wings Over .... sims. Below the readme: F/A-18A Hornet made by The Mirage Factory **************************************************** ---------------------------------------------------------- I. This mod is written for WoX +++++++++++++++++++++++++++++++++++++ II. CREDITS: This plane is made by TMF. SFP1 Model Plane 3D : Flying Toaster Mapping, SFP1 import : BPAo Base Textures : Column5 VMFA-122 Markings : USAFMTL FM : Column5 Cockpit 3D : Flying Toaster/BPAo Textures : BPAo, HUD from Kesselbrut Effects : BPAo Bidons 3D : BPAo Textures : Column5 Test Team Camouflage, Manetsim, Sony Tuckson, Column5, Tom Venom, USAFMTL My little part was only to repack the files into 7zip format. ---------------------------------------------------------- III. INSTALLATION: -Unzip all files into your Wings over Europe or Wings over Israel or Wings over Vietnam or Strike Fighters folder. ------------------------------------------------------------ IV. This mod is FREEWARE. COMMERCIAL use is NOT ALLOWED. ---------------------------------------------------------- V. For remarks, comments, bugs, etc please use CombatAce forum or send me a PM. Hope you enjoy it. Michael (Gepard) February 2018 Submitter Gepard Submitted 02/11/2018 Category F/A-18 Hornet -
Version 1.0.0
350 downloads
This is the old and original F/A-18A Hornet made by TMF. The original host place is gone. So i upload the file for all of us, who still love it to fly the first generation Wings Over .... sims. Below the readme: F/A-18A Hornet made by The Mirage Factory **************************************************** ---------------------------------------------------------- I. This mod is written for WoX +++++++++++++++++++++++++++++++++++++ II. CREDITS: This plane is made by TMF. SFP1 Model Plane 3D : Flying Toaster Mapping, SFP1 import : BPAo Base Textures : Column5 VMFA-122 Markings : USAFMTL FM : Column5 Cockpit 3D : Flying Toaster/BPAo Textures : BPAo, HUD from Kesselbrut Effects : BPAo Bidons 3D : BPAo Textures : Column5 Test Team Camouflage, Manetsim, Sony Tuckson, Column5, Tom Venom, USAFMTL My little part was only to repack the files into 7zip format. ---------------------------------------------------------- III. INSTALLATION: -Unzip all files into your Wings over Europe or Wings over Israel or Wings over Vietnam or Strike Fighters folder. ------------------------------------------------------------ IV. This mod is FREEWARE. COMMERCIAL use is NOT ALLOWED. ---------------------------------------------------------- V. For remarks, comments, bugs, etc please use CombatAce forum or send me a PM. Hope you enjoy it. Michael (Gepard) February 2018 -
TMF Mirage 5F cockpit
Crusader posted a topic in Thirdwire: Strike Fighters 2 Series - File Announcements
File Name: TMF Mirage 5F cockpit File Submitter: Crusader File Submitted: 04 August 2017 File Category: Jet Cockpits Mirage 5F cockpit made in 2007 by Olivier ANGUILLE (RIP) Read README.txt contained in the file for the details. The Mirage Factory Click here to download this file -
Version v1
212 downloads
Mirage 5F cockpit made in 2007 by Olivier ANGUILLE (RIP) Read README.txt contained in the file for the details. The Mirage Factory -
File Name: Fictional ‘What if’ Royal New Zealand Air Force A-7 Corsair II Skins File Submitter: dtmdragon File Submitted: 19 March 2014 File Category: What If Skins Fictional ‘What if’ Royal New Zealand Air Force A-7 Corsair II Skins As requested in MAKO69’s topic (http://combatace.com/topic/82082-a-lot-of-what-if-ideas-for-the-moders/?do=findComment&comment=658905) here are my RNZAF A-7 re-skins. Fact: When the New Zealand Government selected the A-4K Skyhawk for the RNZAF in the late 60’s/ early 70’s the A-7 Corsair II was on the Air Force’s short list along with the F-4 and F-111. A modernised version of the A-7 was again considered in the late 80’s as an alternative to upgrading the RNZAF Skyhawks. You will need the stock Third Wire A-7D and A-7E_74 as well as the Mirage Factory A-7D_84 and A-7K_MF Instillation: As usual simply drop into your mods folder and allow it to override when prompted, none of the aircraft files will be changed just the skins added. Credits: Third Wire and Team Mirage Factory Enjoy, Dan. Click here to download this file -
Fictional ‘What if’ Royal New Zealand Air Force A-7 Corsair II Skins
dtmdragon posted a file in What If Skins
Version 1.0
48 downloads
Fictional ‘What if’ Royal New Zealand Air Force A-7 Corsair II Skins As requested in MAKO69’s topic (http://combatace.com/topic/82082-a-lot-of-what-if-ideas-for-the-moders/?do=findComment&comment=658905) here are my RNZAF A-7 re-skins. Fact: When the New Zealand Government selected the A-4K Skyhawk for the RNZAF in the late 60’s/ early 70’s the A-7 Corsair II was on the Air Force’s short list along with the F-4 and F-111. A modernised version of the A-7 was again considered in the late 80’s as an alternative to upgrading the RNZAF Skyhawks. You will need the stock Third Wire A-7D and A-7E_74 as well as the Mirage Factory A-7D_84 and A-7K_MF Instillation: As usual simply drop into your mods folder and allow it to override when prompted, none of the aircraft files will be changed just the skins added. Credits: Third Wire and Team Mirage Factory Enjoy, Dan. -
Mirage Factory IDF F-4E Kurnass 2000 for Strike Fighters 2
dtmdragon posted a topic in Thirdwire: Strike Fighters 2 Series - File Announcements
File Name: Mirage Factory IDF F-4E Kurnass 2000 for Strike Fighters 2 File Submitter: dtmdragon File Submitted: 22 October 2012 File Category: SF2 Series Add On Aircraft Mirage Factory Israeli Air Force F-4E Kurnass 2000 for Strike Fighters 2 This is a brand new SF2 mod of the Israeli F-4E Kurnass 2000 with a new 3D model. This mod has its origins in the SFP1 Mirage Factory F-4E Kurnass but most of the 3D work to create the Kurnass 2000 model has been done by Sundowner. The majority of the .ini work is new and specifically for the SF2 environment. Features: - Accurate Kurnass 2000 3d model - Modernized cockpit and avionics - Modernized weapons capability - Most advanced version of the F-4E used by the Israeli Air Force - Extensive RWR.TGA files and updated RWR.LST - All weapons from loadout file included http://www.f-4.nl/f4_35.html INSTILATION: Drop files in to appropriate folders, override when asked to. NOTE: Has only been tested/used in a merged install of ALL SF2 titles Credit goes to Bunyap and Chaser617 for the F-4EJ Kai cockpit / Avionics which we used as a base for the Kurnass 2000 Cockpit and Avionics. Also credit goes to The Viper Team for their IAF F-16C/D/I which some of the weapons came from. And of course the Mirage Factory Team. Click here to download this file -
Version 1.2
888 downloads
Mirage Factory Israeli Air Force F-4E Kurnass 2000 for Strike Fighters 2 This is a brand new SF2 mod of the Israeli F-4E Kurnass 2000 with a new 3D model. This mod has its origins in the SFP1 Mirage Factory F-4E Kurnass but most of the 3D work to create the Kurnass 2000 model has been done by Sundowner. The majority of the .ini work is new and specifically for the SF2 environment. Features: - Accurate Kurnass 2000 3d model - Modernized cockpit and avionics - Modernized weapons capability - Most advanced version of the F-4E used by the Israeli Air Force - Extensive RWR.TGA files and updated RWR.LST - All weapons from loadout file included http://www.f-4.nl/f4_35.html INSTILATION: Drop files in to appropriate folders, override when asked to. NOTE: Has only been tested/used in a merged install of ALL SF2 titles Credit goes to Bunyap and Chaser617 for the F-4EJ Kai cockpit / Avionics which we used as a base for the Kurnass 2000 Cockpit and Avionics. Also credit goes to The Viper Team for their IAF F-16C/D/I which some of the weapons came from. And of course the Mirage Factory Team.
