Cold War Aircraft

This is a decaled 512 skin. I'm still working on my 2048 version.
 
All of the tail numbers are correct for the squadron. For every tail number listed, I have a picture of that aircraft with the Redhawks.
 
In the tail number list, you will find asterisks behind some numbers. Each asterisk is a Mig kill that that aircraft actually had.
 
I've also included a hanger screen from a picture I took during a base visit to the Portland Air National Guard Base back when I was in AFROTC.
 
Don't forget to add:
 
[TextureSetXXX]
Directory=142fig
Name=123rd FIS, 142th FIG "REDHAWKS"
Nation=USAF
Squadron=123FIS
Specular=0.300000
Glossiness=0.750000
Reflection=0.000000
 
to your F-4c config file.

This is a decaled 512 skin. I'm still working on my 2048 version.
 
All of the tail numbers are correct for the squadron. For every tail number listed, I have a picture of that aircraft with the Blackhawks.
 
In the tail number list, you will find asterisks behind some numbers. Each asterisk is a Mig kill that that aircraft actually had.
 
I've also included a hanger screen from a picture I took during a base visit to the Portland Air National Guard Base back when I was in AFROTC.
 
Don't forget to add:
 
[TextureSetXXX]
Directory=173fig
Name=114th FIS, 173rd FIG "BLACKHAWKS"
Nation=USAF
Squadron=114FIS
Specular=0.300000
Glossiness=0.750000
Reflection=0.000000
 
to your F-4c config file.

This is a fix for the decal splashing that is occurring underneath the fuselage of the Razbam A-6A when any of my Marine decal mods are installed. I made the fuselage star and bar as a painted-on marking on the fuselage .bmp texture, and made the MARINES decal smaller. The star appears a bit fuzzy now (as many folks like when markings are painted on the texture), but the odd splashing that was appearing underneath the rear fuselage are gone.
 
I also tweaked the fuselage textures a bit here and there. Back up your old files in case you don't like this fix.
 
Mike Druzolowski

VMA(AW)-533 repaint for the Razbam A-6A (white/grey radomes)
 
This is the second of the four Marine Corps A-6A units which flew in Vietnam, and the base model is again the recently released A-6 Intruder by Razbam. It will not work with the original WOV A-6A or the add-on created by Monty CZ. The few photos I have of these aircraft at Nam Phong RTAFB all have white/light grey radomes. 16 airplanes are depicted here as seen over the 1972-73 time period. As always, any additional photos or info from anyone would be appreciated.
 
Thanks again to Prowler and the Razbam team for a great product.
 
Mike Druzolowski

Syrian camo scheme .

Desert camo scheme for the MF Mig 21F13.

Here is a temporary fix to allow you to fly the Razbam A-6A in WOV using the default WOV decal markings, until all the modders out there create new markings specific for the Razbam offering. Several default decals are included in slightly modified form to fit the new Razbam vertical fin and rudder shape. I have also added random bureau numbers (which were always missing from the default WOV A-6A markings) and Modex numbers to nose and flaps in the 400-600 range.
 
Thanks to JSF_Aggie, and of course Prowler and the Razbam team for a great product.
 
Mike Druzolowski

VMA(AW)-533 repaint for the Razbam A-6A (black radomes)
 
The next Vietnam Marine Intruder unit decals, VMA(AW)-533 at Chu Lai, and the base model is again the recently released A-6 Intruder by Razbam. Just drop the folder into the A-6A folder and go fly. It will not work with the original WOV A-6A or the add-on created by Monty CZ.
 
A working decal system is provided for anyone creating new markings for the plane.
 
Enjoy,
Mike Druzolowski

Serbian Air Force Mig-21MF
 
This is a kind of "what if". Asfar as I know the FRY Air Force didn't have MFs, they were probably retired and so could not be used by the Serbian Air Force. This skin follows the idea that they continued their service in the FRY Air Force, later the Serbia and Montenegro Air Force and finally the Serbian Air Force. I made the skin to resmble the SAF's current camouflage used on it's Mig-21s.
 
Simply put in your Mig-21MF folder and select SrbAF from the list of skins.
 
-Wolf65

Federal Republic of Yugoslavia/Serbia and Montenegro Air Force Mig-21MF
 
This is a kind of "what if". Asfar as I know the FRY Air Force didn't have MFs, they were probably retired. This skin follows the idea that they continued their service in the FRY Air Force and later the Serbia and Montenegro Air Force.
 
Simply put in your Mig-21MF folder and select YUG/SCG from the list of skins.
 
-Wolf65

Yugoslav Air Force Mig-21MF
 
This is a skin for the stock Mig-21MF and represents the markings of the Yugoslav Air Force.
 
Simply put in your Mig-21MF folder and select YuAF from the list of skins.
 
-Wolf65

VMA(AW)-242 repaint for the Razbam A-6A (white radomes)
 
This is part two of my VMA(AW)-242 decals, and the base model is again the recently released A-6 Intruder by Razbam. Just drop the folder into the A-6A folder and go fly. Most aircraft had black radomes early in the unit's history at Da Nang, but many later aircraft were seen with off-white radomes. It will not work with the original WOV A-6A or the add-on created by Monty CZ.
 
A working decal system is provided for anyone creating new markings for the plane.
 
Enjoy,
Mike Druzolowski

Fix For Razbam's Texture in the VMA-121 Folder
 
Fix for the missing texture in the VMA-121 texture folder, fixing the VA-165 duplicate fuselage and wing textures with the right ones.
Original textures by Russel R. Smith, for MSFS, converted for Strike Fighter series.

VMA(AW)-242 repaint for the Razbam A-6A (black radomes)
 
This is the first of the four Marine Corps A-6A units which flew in Vietnam, and the base model is the recently released A-6 Intruder by Razbam. Just drop the folder into the A-6A folder and go fly. Most aircraft had black radomes early in the unit's history at Da Nang. It will not work with the original WOV A-6A or the add-on created by Monty CZ.
 
A working decal system is provided for anyone creating new markings for the plane.
 
Enjoy,
Mike Druzolowski

Touch up of the default RAF 41 sq skin skin for the Mirage Factory Jaguar GR1 (1024x1024)
 
 
 
This skin was done a while back now for myself and addresses the following:
 
1. Overall colour scheme darkened.
2. Some detail added to engine nozzles and heat shields.
3. Inside of air intakes are no longer white.
4. Mud added for all those landings on wet country roads :)
 
 
 
Have included some revised drop tank and rack skins so the colours match
 
 
Press the button below to download this skin and save it to your Desktop.
 
Jaguar GR1 model for SP4 available here:
http://forum.combatace.com/index.php?autoc...p;showfile=2910
 
Only tested in WoE but should also work in WoV/SFG/SFP1
 
 
 
Original skins by Sony Tuckson / Mirage Factory Team
 
You are allowed to modify and redistribute these files, but you must (1) give fair credit (2) distribute work based on these files under the same conditions as I did. (3) You may NOT use these files or works based on them for commercial (PAYWARE) purposes.